Scribd
Upload
24 views

12.00 Meters 12.00 Meters 8 Nos 8 Nos 1.50 Meters 1.50 Meters 620 MM 200 MM 1500 MM 110 MM 20 Mpa 415 Mpa

This document provides design parameters and calculations for a grid floor with beams spaced at 1.5 meters in both x and y directions. Key information includes: - The floor is made of concrete with a grade of 20 MPa reinforced with steel beams of grade 415 MPa. - Loads on the floor include a total factored load of 15.91 kN/sqm from the slab weight, beams, live load, and floor finish. - Deflection calculations show the maximum long-term deflection of 47.72 mm is within the permissible limit of 48 mm as per IS 456 standards. - Bending moment, torsional moment, and shear force values are calculated to be the

Uploaded by

asluznet
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
24 views

12.00 Meters 12.00 Meters 8 Nos 8 Nos 1.50 Meters 1.50 Meters 620 MM 200 MM 1500 MM 110 MM 20 Mpa 415 Mpa

This document provides design parameters and calculations for a grid floor with beams spaced at 1.5 meters in both x and y directions. Key information includes: - The floor is made of concrete with a grade of 20 MPa reinforced with steel beams of grade 415 MPa. - Loads on the floor include a total factored load of 15.91 kN/sqm from the slab weight, beams, live load, and floor finish. - Deflection calculations show the maximum long-term deflection of 47.72 mm is within the permissible limit of 48 mm as per IS 456 standards. - Bending moment, torsional moment, and shear force values are calculated to be the

Uploaded by

asluznet
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Grid Floor Analysis & Design

Data
Length of beams

x direction
Lx = 12.00 meters

Number of beams

Nx = 8 nos
a1 = 1.50 meters

Spacing of ribs

y direction
Ly = 12.00 meters
Ny = 8 nos
b1 = 1.50 meters

D = 620 mm
bw = 200 mm
bf = 1500 mm

Depth of beam
Width of beam
Width of flange

Grade of Steel

Df = 110 mm
fck = 20 MPa
fy = 415 MPa

Modulas of Elasticity

E = 2.2E+07 KN/sqm

Thickness of flange
Grade of Concrete

Loads
Live Load
Floor Finish
Other

bf

Df

bw
a1

3.00 KN
1.00 KN
0.00 KN

Loading Calculation
Total weight of slab
Total weight of beams in x direction

b1

wby = 257.92 KN
wll = 432.00 KN

Total weight of beams in y direction


Total weight of Live load
Total weight of Floor Finish

wff = 144.00 KN

Other load

wol =

Total Load
Total Load/sqm
Total Factored Load/sqm

Ly

ws = 396.00 KN
wbx = 297.60 KN

ws+wbx+wby+wll+wff+wol = 1527.52 KN
q = 10.61 KN/sqm
Q = 15.91 KN/sqm

Design Parameters
Ratios
Df/D = 0.177
bf/bw = 7.500
Moment of Inertia
I = (k x *b w *D 3 )/12
kx = 2.15
I = 8.54E-03
Flexural Rigidity of ribs
D x =EI/a 1
Dx = 1.27E+05

refer Chart 88 of SP 16 pg 215

D y =EI/b 1
Dy = 1.27E+05

Modulus of Shear
G=E / (2(1+ )
G = 9.72E+6 KN/sqm
Torsional Constants (Polar Sectional Modulus)
C 1 =(1-(0.63*(b w /D))*(b w 3 *D/3) C 2 =(1-(0.63*(b w /D))*(D 3 *b w /3)
C1 = 1.32E-3 cum
C2 = 1.27E-2 cum
Torsional Rigidity
C x =GC 1 /b 1
Cx = 8.54E+3

C y =GC 2 /a 1
Cy = 8.21E+4

2H=C x +C y
2H = 9.06E+4
D x / L x 4 = 6.14
D y / L y 4 = 6.14
2H / (L x 2 *L y 2 ) = 4.37
Deflection Check
Central Deflection

=(16*Q/ )/((D x /L x 4 )+(2H/(L x 2 *L y 2 ))+(Dy/Ly 4 ))


= 15.91 mm
Long Term Deflection
Lt defl . = 3*
Ltdefl. = 47.72 mm

span/deflection
(Clause 23.2 IS 456)
s/d = 48.00 mm

Lx

Maximum deflection including long term effects is within permissible limits i.e. Ltdefl < s/d ratio

Maximum Moment & Shear Values


Max Bending Moments
M x =D x *( /L x ) 2 *
Mx = 139 KN-m

M y =D y *( /L y ) 2 *
My = 139 KN-m

Max Torsional Moments


M xy =(C x * 2 * 1 )/(L x *L y )
Mxy = 9 KN-m
Shear Force
Q x =[(D x *(/L x ) 3 )+(C y *( 3 /(a*b 2 )))]*

Q y =[(D y *(/L y ) 3 )+(C x *( 3 /(b*a 2 )))]*

Qx = 39 KN

Qy = 39 KN

You might also like