Q 1G) QBT (PIPE SUPFT) QP @ WRT* QmwPLe GIVES THE C/VIEW ANGLE ( ie 90 DEG) GIVES THE SLAB/GLAB TEXT ATTRIBUTES GIVES THE CB ATTRIBUTES GIVES THE CE BETA ANGLE GIVES THE PIPE INSIDE DIA. GIVES THE ATTACHEDDRG/SHT (@RWGLVL) GIVES THE DEAD TEXT ATTRIBUTES GIVES THE CE EAST CO-ORDINATE GIVES THE CE ELEMENT NAME GIVES THE PLOO/PAVE RADIUS ie 100mm GIVES THE NXTR/VERT RADIUS ie 100mm GIVES THE SFRA FROM POINT CO-ORDS. GIVES THE CE FUNCTION GIVES THE CE GROSS C OF G GIVES THE GENERIC TYPE ie OD,HP,TG GIVES THE CE GROSS WEIGHT GIVES THE CE (PLOO LVL) PLT THK GIVES THE CE HANGER HEAD CO-ORDS GIVES THE CE PIPE HEAD CO-ORDINATES GIVES THE CE HANGER TAIL CO-ORDS GIVES THE CE P POINT CO-ORDINATES GIVES THE PLINE NAME USING CURSORQINREF GIVES THE CE INREFERENCE QISPEC (PIPING) GIVES THE CE (PIPE) INSULATION QSLIN GIVES THE CB JOINT LINE QJUSL GIVES THE CB JUSTIFICATION LINE QLEN (DRAFT) GIVES THE STRA LENGTH QLEV GIVES THE CE LEVEL (OBSTRUCTION ETC) Q.LHEI DRAFT) GIVES THE TEXT LETTER HEIGHT QLIsT. GIVES THE CE FITTINGS (NEG EXTR. ETC.) QLOCK GIVES THE LOCK STATUS QLSHAPE (DRAFT) GIVES THE LABEL LEADER LINE STATUS QMATREF QMDB QMEM @ oNaDP 5 Q! ‘QMPT MRAFT) QmrTo QNAM QNCOF QNSRF QNVOL QNWEI QOBS QORI QowNn QPA @IPING) QPARA QPH@IPING) | QPH BORE (PIPING) GIVES THE CE (PIPE HEAD) BORE e@ QPH OD (PIPING) GIVES THE CE (PIPE HEAD) DIAMETER QPT OD PIPING) GIVES THE CE@IPETAIL) DIAMETER QPI WRT/* (PIPING) GIVES THE CE (PIPE SUPPT) LOCATION QPKEY DRAFT) GIVES THE DIM PLINE STATUS (ie TCTF) QPL WRI? (PIPING) GIVES THE CE HVAC LEAVE (CO-ORDINATES QPLTXT@RAFT) GIVES THE PROJ TEXT ATTRIBUTES QPpos GIVES THE CE CO-ORDINATES (START POS) QPOS INSV1 GIVES THE CE DISTANCE TO VAR. $V1 QPOSE GIVES THE CE END CO-ORDINATES QPOS FITT GIVES THE C/FITT CO-ORDINATES (START) QPOS PLRF (DRAFT) GIVES THE CURRENT VSEC CO-ORDS. QPOS DPL@ GIVES THE PLINE CO-ORD AT CE START Q POS PPLI BOS WRT/* GIVES THE BOS PLINE CO-ORDINATES QPOS PPLINA PROP 0.5 GIVES THE CENTRE CO-ORDINATE POSITIONS OF THE PLINE (PPL) AT ed (0.5 x DER LEN) ON THE N/A. Poss GIVES THE CE START CO-ORDINATES Q Q POSS POSE GIVES THE CE BOTH END CO-ORDINATESQSNAP (DRAFT) QSPRE QTCTL OR Q CUTL) QTHPOS (DRAFT) QTMRF MRAFT) QVTYP DRAFT) Q:X¥POS DRAFT) Qzpis GIVES ORIGIN OF CE WITH REGARD TO WORLD GIVES THE CE PIPE TAIL ATTRIBUTES GIVES THE CE RADIUS GIVES THE CE PDMS REFERENCE NO. GIVES THE CB REPRESENTATION STATUS GIVES THE CE FUNCTION GIVES THE CURRENT VIEW RULE SETTINGS GIVES THE VIEW O/ALL DIMENSIONS GIVES THE PLOO JUSTIFICATION ie UTOP DCEN DBOT GIVES THE SNAP SETTING (ON/OFF) GIVES THE CE CUT LENGTH? GIVES THE CE USER DATABASE GIVES THE CE VOLUME GIVES THE VIEW LIMITS GIVES THE C/VIEW SCALE (ie 05) 0.5=1:2 02=1:5 0.1 =1:10 0.05 = 1:20 0.04 = 1:25 0.02 = 1:50 0.01 = 1:100 GIVES THE VIEW ATT(e.GLOBAL HIDDEN) GIVES THE VIEW POSITION ON SHEET GIVES THE CE FITTING DIST FROM START‘PDMS TYPED COMMANDS ADD CE ADD CREF ADD CE COL 39 ADD ALL WITHIN VOL CE “ADD ALL WITHIN VOL CE 100 ADDS CE ‘ADDS CE PIPE CONNECTION REF ADDS CE WITH COL 39(SEE COLOUR SHEET) ‘ADDS ALL DISCIPLINES THAT OVERLAP CE ‘ADDS ALL DISCIPLINES THAT OVERLAP CE ‘WITH A VOLUME OF 100mm ALL ROUND ADD ALL SCTN WITHIN VOL CE ADDS ALL SECTIONS THAT OVERLAP CE ADD ALL EQUIP WITHIN VOL CE ‘ADDS ALL EQUIPMENT THAT OVERLAPS CE ADDS CE SITE ADD SITE AID CLEAR LINE ALL AXES OFF BY D100 (PDMS ONLY) BY E100 (PDMS ONLY) BY.N100 (PDMS ONLY) BY 0100 (@DMS ONLY) BY X100 DRAFT & PDMS) BY X100 WRT/*(@PDMS PLATES) CHE CE COL ACT BLUE COL CE VIOLET COL 39 YELLOW DELETECE — EXT END TO IDPL@STA EXTEND -1000 FINISH FLIP CE GETWORK INCL CIRC 1 OF NOTE/TABLE INCLD@ INCL NAME..... LOCK ALL MAR CE NAME /TEMPORARY EXTENDS THE END 1000 ENDS & SAVES PDMS SESSION FLIPS CE GETS LATEST MODEL REPOSITIONS CIRC 1 TO PREV. SELECTED DESTINATION GIVES THE CE CO-ORDINATES (START)OR ITEM TO BE TRANSFERED REPOSITIONS CE TO A SELECTED DESTINATION LOCKS CE & CE MEMBERS MARKS CE NAME RENAMES SAID ITEM TO TEMPORARY ()~NEW FITT COPY PREV BY ZDIST PROP BANG 180 ‘NEW GLAB COPY SV1 NEW GLAB COPY PREV AT @ NEW SCTN COPY PREV BY E200 (PDMS) NEW SCIN COPY PREV BY E200 COL 4(@PDMS) NEW PANE COPY PREV BY £200 COL 4(PDMS) NEW TEXP COPY PREV BY Y10 (DRAFT) NEW SYMB COPY PREV BY X-10 (DRAFT) NEW VRTX COPY PREV BY X10 DRAFT) PKEY LTOC OBSTRUCTION OFF REPRES HOLES OFF REPRES PNODE COL YELLOW REPRES PNODE ON REPRES PNODE SIZE 6 REPRES PROF ON CL OFF ‘[REPRES SNODE OFF ROT THRO POSE ABO D BY 30 ROT THRO POSS ABO D BY 45 ROT THRO MIDP ABO D BY 90 ROT ABO DP@ BY 90 ROT ABO IDPL@ BY 90 ROT THR IDP@ BY 90 ROT THR IDPL@ BY 90 ROT ABO P1 BY 90 PREC 4 DP ZDIST (ZDIST + 100) COPIES FITT AT END POITION OF CE AT A BANGLE OF 180. START POSITION CE MIDDLE POSITION CE END POSITION CE PROPO PROP 0.5 PROP 1 COPIES GLAB AS VARIABLE SV1 COPIES GLAB TO PICKED LOCATION COPIES CE E200 COPIES CE £200 COL 4 COPIES CE £200 COL 4 COPIES CE Y10 COPIES CE X-10 COPIES CE X10 (CLOUDS) (CHANGES DIM FROM EXIST JUSL TO LTOC in Drawist) REMOVES OBSTRUCTION REPRESENTATION REMOVES HOLE REPRESENTATION (Apply ‘Add’ in Drawlist) PRIMARY NODES SHOWN YELLOW PRIMARY NODES SHOWN ONLY CHANGES PRIMARY NODES TO 6mm SETS PROFILE REPR AS SOLID SECONDARY NODES OFF ROTATES CE ABOUT END POS BY 30 DEG ROTATES CE ABOUT START POS BY 45 DEG ROTATES CE ABOUT MIDP POS BY 90 DEG ROTATES CE LOCAL TO PPOINT BY 90 DEG. ROTATES CE LOCAL TO PLINE BY 90 DEG. ROTATES CE ABOUT ANY PPOINT BY 90 DEG. ROTATES CE ABOUT ANY PLINE BY 90 DEG. ROTATES CE ABOUT P1 BY 90 DEG. LETS YOU TOGGLE BETWEEN LAST 2 ITEMS ‘UNMARKS CE NAME GIVES PRECISE READOUT TO 4 DEC. POINTS MOVES ITEM 100 FROM ORIG POSITION5@ DRAFT QUERY COMMANDS Note: most of the query ‘commands used in PDMS. DESIGN also work in DRAFT QBSRF QCHEIGET QcroF Qu QpPpos QDTOF QDTER .QErT QuusT -QLEN ‘Q LHEI QLSHAPE QVTYP RAFT) QXYPOS (DRAFT) GIVES THE C/VIEW ANGLE (ie 90 DEG) GIVES THE CE (NOTE) TERMINATOR POS'N GIVES THE DRG. SHT. REF. (STRU LVL) GIVES THE TEXT CHARACTER HEIGHT GIVES THE CR (NOTE) LEADER LINE POS’N GIVES THE CIVIEW DIRECTION ie N ) GIVES THE LDIM POSITION ON SHEET GIVES DIMENSION TEXT X and ¥ value GIVES THE LAYER/LDIM TERM”TR DEFAULT GIVES THE STRA FROM POINT CO-ORDS ¢ GIVES THE C/VIEW JUSTIFICATION( ie LEF! GIVES THE STRA LENGTH GIVES THE TEXT LETTER. GIVES THE LABEL LEADER LINE STATUS GIVES THE CE VISIBILITY GIVES THE VIEW LIMITS GIVES SCALE RATIO (ie 1 TO 25) GIVES THE C/VIEW SCALE (ie 0.5) 02=1:5 0.1 =1:10 0.05 = 0.04 = 0.02 = 0.01 = GIVES THE VIEW ATT(ie.GLOBAL HIDDEN) GIVES THE VIEW POSITION ON SHEETDRAFT TYPED COMMANDS ADEG 0 ADEG 45 ADEG 90 APOFFSET 5-5 AaT@ AT DP@ ATIDPL@ BLNK FALSE BLNK TRUE BIEXT’A-A? BY@ BY X100 BY Y100 CPOFFSET 5-5 DIM TEX#100 TYP” DPOS@ DTAN DEF DTAN PAR DTAN HOR DTAN STAN DTAN VERTICAL DTOF @ DTOF 04 DTANPARDTOF 80 NLPN OFF FPT@ PT BY X2Y-2 FRAME ON GAP@ GAP DELETE ALL GAP DELETE AT GBOXxs HIGH CE INCL CIRC 1 OF. NOTE/TABLE ‘MODIFIES TEXT HORIZONTAL ‘MODIFIES TEXT/PRIMITIVES AT 45 DEG. MODIFIES TEXT VERTICAL RE-POSITIONS LTER END XS ¥-5 MODIFIES TEXT TO A-A. MOVES CE BY LOCT. FROM POS TO NEW POS MOVES CE X (BAST) 100 mm. MOVES STRA FROM POINT | BY CURSOR MOVES STRA FROM POINT BY TYPED INPUT ‘TEXT FRAME ON ‘LETS CURSOR DETERMINE | DIMENSION GAP DELETES ALL DIMESION GAPS. DELETES DIMENION GAP BY CURSOR MODIFIES TEXT FRAME WITH 5 CLEARANCE HIGHLIGHTS CE REPOSITIONS CIRC 1 TO PREV. SELECTED DESTINATION REPOSITIONS CE TO A SELECTED PLACES ANOTHER VERTEX ON LEADERLINE ‘TURNS CE VISIBILITY OFF TURNS CE VISIBILITY ONLTER OBL MODIFY @ NEW CIRCLE DIAM 100 AT@ NEW CIRCLE RAD 50 AT@ NEW GLAB COPY SV1 NEW GLAB COPY PREV AT @ NEW RECT XLEN40 YLEN20 ANG 45 ORIG CORNER AT@ NEW GLAB COPY PREV AT@ ‘NEW ‘element’ COPY PREV BY X20 NLPN OFF OSHT 10 OSHT @ PLCL@ PROJ CLEAR @ PROJ CLEARS PROJ TEX’TYP” PTAN PAR PTAN HOR PTAN VERTICAL PTOF -80 RCOD LEFT REPEAT 5 BY X10 SNAP ON/OFF SNAP ON 10 SNAP ON SPACING X10 ¥20 TPEN 71 TrT@ TPT BY X2 Y-2 UPDATE ANNO UPDATE DESIGN UPDATE PICTURE GRID ON/OFF # #SPRE(C10:19)UB #SPRE(C10:16)UB EL. #DIMPOSU(C2:5).#DIMPOSU(C6:) ‘LINE TERMANATOR DASH ENABLES MODS TO SLAB/GLAB GEOMETRY (> DRAWS CIRCLE AND POSITIONS BY CURSOR DRAWS CIRCLE AND POSITIONS BY CURSOR COPIES GLAB AS VARIABLE SV1 COPIES GLAB TO PICKED LOCATION DRAWS RECT AND POSITIONS IT BY CURSOR COPIES TEXT AND POSITIONS BY CURSOR COPIES ‘element name’ WITH OFFSET BY X20 TURNS LINE OFF (IB CLOUD VERTEX) SETS PROJECTION LINE POSITION BY CURSOR SETS PROJECTION LINE POSITION BY 5mm PROJECTION TEXT READS TYP PROJECTION TEXT PARALLEL PROJECTION TEXT HORIZONTAL an PROJECTION TEXT VERTICAL ‘ PROJECTION TEXT OFFSET X-8 YO ROTATES VIEW BOX LEFT COPIES CE 5 TIMES BY 10mm SPACES TURNS SNAP ON/OFF GIVES SNAP GRID X10 ¥10 ~ GIVES SNAP GRID X10 ¥20 GIVES THE TEXP COLOUR ATTRIBUTE 71 MOVES STRA TO POINT BY CURSOR. “ MOVES STRA TO POINT BY TYPED INPUT UPDATES ANNOTATION UPDATES DESIGN UPDATES GRAPHICS TURNS SNAP GRID VISIBILITY ON/OFF UNDERLINES TEXT ie SECTION A-A DEFAULT DIMENSION ie 4500 ‘UNDERLINES DIMENSION ie 4500 UNDERLINES DIMENSION ie 45000 TYP ‘WEST SHELL FORMAT ON DRG. 254x102x22UB FORMAT ON DRG. 254x102UB FORMAT ONDRG. EL. 508.500 EL, + #DIMPOSU(C2:5).#DIMPOSU(C6:) FORMAT ON DRG. EL. + 508.500SHAPES | EP LSNO PEPEELCELLCLEELEL SRTO & SSPH PIPE ATTACHMENT REQ’D FOR: SRUCTURAL PENETRATIONS THRO DECKS/WALLS ETC FITTING STRUCTURAL PLATE/GRATING SECTION P POINT OWNED BY PLOO PENETRATION THRO” DECK OR ‘WALL PLATE ( PIPE SLEEVE/ELECTICAL TRANSIT. ETC) PLATE OWNED BY PANE HAS PLATE ATTRIBUTES STRUCTURAL SECTION ie. HEA,UNP etc NODE POINT ‘USED IN CONNECTING SCTN STRUCTURAL SECTION ie HEA,UNP etc PPOINT OWNEDBYNXT ~~~ RECT. SNOUT (Ofiiset Truncated Cone; similar to eccentric pipe IMPLIED BOXING CYLINDER (Defined by Distance to Bottom & to Top) TANGULAR PYRAMID ‘NEGATIVE CONE NEGATIVE CYLINDER (Defined by Distance to NEGATIVE CYLINDER (Defined by Distance to NEGATIVE DISH NEGATIVE PYRAMID NEGATIVE RECTANGULAR TORUS ‘NEGATIVE SLOPE-END CYLINDER ‘NEGATIVE SNOUT ‘NEAGTIVE SPHERE BOX CIRCULAR TORUS (e.g. Tubular Bend) CONE CYLINDER (Defined by Distance to Bottom & Height) DISC DISH (Pressure Vessel End or Similar) RECTANGULAR TORUS (e.g. Cable Tray Bend) SLOPE-END CYLINDER SPHERE TUBINGUntitled Pseudo Attributes The following pseudo attributes are allowed in expressions:- All element types: 'NAMN' or’NAM/E NOPREF' Text _ Name without prefix (preceding "/"). "FLNM' or 'FULLNAME” Text _Treename, e.g. "BOX 1 OF /PUMP1”. "FULLTYPE’ Word Similar to TYPE, but more than 4 chars. "SEQ/UENCE' or 'ORDER' _ Integer Position in member list of owner. ‘ust ‘Word(38) Possible types in member list. ‘ous ‘Word(200) Possible types of owner. ‘HUST ‘Word(200) Possible Higher element types in hierarchy. ‘QUANTITY: Integer Number of elements, currently aways 1. "DBNU/MBER' Integer DB number 'MCOUINT’ noun Integer Count of element type in members list. If no ‘noun’ is given that the total me mber list count is retuned. 'DDEP/TH' _Integer Database depth below world (worid at 0, Site at 1 etc) ‘Most DES! element types: "BIAST or'X’ Real East component of postion “wiEsT’ ‘West component of position. "NIORTH' or 'Y" Real NorthvY component of position. "SIOUTH' Real South component of position. “UIP' oF ' Real _Up/Z component of position. "DIOWN' Real Down component of position. ‘DDES/PARAM 'Real(50) Return desparam as a distance, converted to local units WVOL Real(6) World volume DESI elements with a catalogue or spec. ref.: ‘STYPIE, ‘Word Spec answer for STYPE. question "CATIREFERENCE’ Ref Catalogue reference. ‘SPR/IEFERENCE’ Ref Spec. ref. ‘PARAM Real30) Parameters of the catalogue component. IPAR/AM' Real(30) Parameters of the insulation catcomp. "TPARIAM' Real(30) Parameters of the tracing cat. comp. ‘PTRE/FERENCE' . Ref Point set ref. (GMRE/FERENCE’ Ref Geometry set ref. "DTRE/FERENCE® Ref Data set ref. Se. "MTXR/EFERENCE Ref Material text ref. 'MTXX" Text Material XTEXT. "MTYX’ Text Material YTEXT. "MTZX’ Text Material ZTEXT. ‘DETRIEFERENCE Ref Detail text ref. “DTXR’ Text Detail RTEXT. ‘DTXS' Text Detail STEXT. “‘DTXT. Text Detail TTEXT. ‘SPR Ref __ Insulation spec. component ref. ‘CATREFERENCE’ Ref Insulation cat. component ref NDEMTAIL' Ret insulation detail text ref. ORT Text _ Insulation detail RTEXT. “DST Text — Insulation detail STEXT. “wT Text insulation detail TTEXT. ‘IMAT" Ref Insulation material text ref. WwxT” Text — insulation material XTEXT. wyYT Text — insulation material YTEXT. wzT Text — Insulation material ZTEXT. Page 4Untitled ‘TSPRIE: Ref Tracing spec. component ref. "TCATREFERENCE’ Ref Tracing cat. component ref. "TDE/TAIL Ref Tracing detail text ref. ‘TORT Text Tracing detail RTEXT. ‘st Text Tracing detail STEXT. Torr Text Tracing detail TEXT. ‘TMAT. Ref Tracing material text ref. TMXT. Text Tracing material XTEXT. ™™YT Text Tracing material YTEXT. TwzT Text Tracing material ZTEXT. ‘PROPIERTY word’ text Data set property value for ‘word 'PRPU word’ text Query property purpose 'PRTI word — text Query propertytitle 'PRDES word’ text Query property description ‘PRLS ‘word(100) list of data set properties for element "MAXB/ORE’ Real Maximum bore for ail points ‘PIPOINT BORIE' of PPBORVE " DReel Bore at P-point . 'PIPOINT <> CONINECTION' or 'PPCOYNN " ‘Word Connection type at P-point < w. 'PIPOINT POSATION’ or ‘PP/OSITION " Pos Position at P-point . ‘PIPOINT DIRECTION’ or ‘PDIRECTION " ODir Direction at P-point . ‘PIPOINT GRADIENT of 'PGRAD " Real Gradient at P-point . "PIPOINT BOP’ or ‘PBOP " Pes Position of bottom of pipe at P-point . ‘PIPOINT TOP! or'PTOP" Pos. Posn. of top of pipe at P-point . 'PIPOINT OD' of POD ' OReal Outside diameter at P-point . ‘PLIST —_—Real_ For list of valid ppoint numbers ‘PPSKEY " or ‘P/POINT PSKEY" word point Pskey ‘PPURP ' or 'P PURP’ word ppoint Purpose ‘PDESC ' or'P DESC’ Ditext point description Attributes specific to piping and hanger components (including TUBI): 'GRDE or 'GRADVENT'Real Gradient of implied tube. "TPs" Pos — Position(centre) of implied tube. ‘MTL: Real Length of material tube. 'MTCL' Real Centre-iine length of material tube. 'MTBE' Ref Ref of pipe comp. beginning matl tube. 'MTEN' Ref Ref of pipe comp. ending material tube. NB. the above are also available at the branch element Notes 4. Gradient is the vertical rise(fall) divided by the horizontal distance. The maximum/minimum values ret umed are 1E6, -1E6. 2. Naterial tube is defined to be continuous lengths of TUB! seperated by components for which the LO FF attribute is set to false or there is no LOFF attribute. i.e. several pieces of implied tube may make up @ ma terial tube. 'PAIRRIVE BORIE' or ‘ABOR' Real Arrive bore. 'PAIRRIVE CON/NECTION’or ‘ACON’ Word Arrive connection type. 'PAIRRIVE POS/ITION' or ’APOS' Pos Arrive position. 'PARRIVE DIRIECTIONor 'ADIR' —Dir__—_Arrive direction. Page 2Untitled "PARRIVE GRADIENT or'AGRD' — Real Amtive gradient. 'PAIRRIVE BOP" or ‘ABOP" Pos Position of bottom of arrive pipe. "PAIRRIVE TOP’ or ‘ATOP" Pos Position of top of arrive pipe. ‘PAIRRIVE OD! or ‘AOD! Real Diameter of arrive pipe. 'PLIEAVE BORIE' or_‘LBOR' Real__ leave bore. ‘PLIEAVE CONINECTION®or ‘ACON' Word leave connection type. "PLIEAVE POSIITION' or 'LPOS' Pos leave position. "PLIEAVE DIRIECTION®or ‘LDIF’ Dir leave direction. "PLIEAVE GRADIENT’ or'LGRD' —Real__Leave gradient. ‘PLIEAVE BOP’ or'LBOP’ Pos —_Position‘of bottom of leave pipe. ‘PLIEAVE TOP" or ‘LTOP" Pos Position of top of leave pipe. ‘PLIEAVE OD! or ‘LOD! Real Diameter of leave pipe. Attributes at TUBL TLE’ Real Length of implied tube. Attributes for BRANCH elements: "TULEIN' Real Branch tube length. ‘CLUENGTH Real Branch centre-iine length. ‘TEND’ ‘Word End connection type of TREF.¢.9. START, END, HEAD or TAIL ‘END! ‘PHIEAD GRADIENT or PHGR’ ‘PHIEAD BOP’ or ‘PHEP* ‘PHIEAD TOP" of ‘PHTP* ‘PHIEAD OD’ or PHD! ‘PTIAIL GRADIENT or ‘PTGR’ ‘PT/AILBOP* or 'PTEP* ‘PTIAIL TOP" or PTE" ‘PT/AILOD' or PTOD’ ‘HH/EAD GRADIENT or ‘HGR’ "HH/EAD BOP’ or 'HHBP* ‘HH/EAD TOP’ or ‘HHTP* ‘HH/EAD OD’ or HOD" “HTVAIL GRADIENT ot 'HTGR' “HTIAIL BOP’ or 'HTBP" "HT/AIL TOP" or HTTP" ‘HT/AIL OD’ or'HTOD' pos Word End connection type of HREF Real Pipe head gradient. pos Pipe head bottom. Pos Pipe head top. Real Pipe head outside diameter. Real Pipe tail gradient. pos Pipe tall bottom. pos Pipe tail top. Real Pipe tail outside diameter. Real Hanger head gradient. pos Hanger head bottom. pos Hanger head top. Real Hanger head outside diameter. Real Hanger tal gradient Hanger tail bottom. pos Hanger tail top. Real Hanger tail outside diameter. Specials for structural items in the DES! database: 'PSTRIEFERENCE’ Ref 'GSTRIEFERENCE’ Ref ‘OPARIAM" Real(30) "APAR/AM Real(30) ‘ODESP/ARAM Real(100) ‘ADESP/ARAM’ Real(100) Structural Pine set ref. Structural geometry set ref. ‘Owning pars. of catalogue component. Attached pars. of catalogue component. ‘Owning design pars. of design comp. Attached design pars. of design comp. Page 3Untitled 'ORVENTATION —ori_—_Orientation (derived for steelwork, TUBI). ‘POSTION’ pos Position (derived for steelwork, TUB). ‘DRPS' pos Derived position, alowing for justafications. ‘MIDP/OINT pos Mid-point (derived for steelwork). ‘LENGTH’ Real Length (derived for steelwork). ‘CUTUENGTH Real Cut length (derived for steehwork). ‘ACTLIENGTH' Real ‘Actual length (derived for steelwork). "ECC/ENTRICITY — pos _Eccentricty. "ECC pos Eccentricity of joint. 'ANPS' pos Attached neutral point of section. "ANP! pos Attached neutral point of joint. ‘ONPS' pos Owning neutral point of section. ‘ONPJ! pos Owning neutral point of joint. 'PLST word or ‘PPLINE word START pos line start "PLEN word’ or 'PPLINE word END' pos_pline end "PLOR word’ or'PPLINE word ORI’ ori line orientation, "PLE word' or 'PPLINE word LEVEL’ reai(2) pline level "PLCN word' or 'PPLINE word CLFL' log _pline centtreline flag 'PLTU word! or 'PPLINE word TUFL' log _pline tube flag "PLCONN word'or 'PPLINE word CONN’ word __pline Connection "PLPURP word’ of PPLINE word PURP' word pline PURPose "PLDESC word’ or ‘PPLINE word DESC'text For Pline description "PLNAMES' word(100) For list of valid plines "NWE!' real Net weight 'GWET real Gross weight ‘NSRF real Net surgace area 'GSRF real gross surface area ‘DNST real density 'NCOF' pos net CofS 'GCOF' pos Gross CofG ‘MIDP' pos Midpoint DRAFT pseudo-attributes in the PADD database: LHEVGHT Real Letter height. 'XYPS' or ‘XYPOISITION’ ——_Real(2) 2D position. "DPOSITION' Real(2) Dimension line/arc position. ‘DTLHVEIGHT: Real Dimension text letter height. ‘PTLH/EIGHT Real Projection text letter height. 'GAPS' Real(12) Projection line gap array. ‘PRMVUSIBILITY’ Log Draughting primitive visibility. PARAGON pseudo-attributes on SPCO elements "WDANS/WER' ‘Word Answer as a word. "WDMAX/AN' Word Maximum answer as @ word. Other 'CEND' Word End connection type.at CREF e.g. HEAD, TAIL, START, END Attributes on TUBI ‘The following attributes are handled specially on TUBI:- SPRE, CATR, GMRE, PTRE, DTRE, IPAR, PARA (uses LSTU for spec/catalogue values) MTXR, PBORE Page 4