Scribd
Upload
548 views

8.1.2.8 Lab - Converting IPv4 Addresses To Binary

lab

Uploaded by

tomardivya
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
548 views

8.1.2.8 Lab - Converting IPv4 Addresses To Binary

lab

Uploaded by

tomardivya
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Lab Converting IPv4 Addresses to Binary

Objectives
Part 1: Convert IPv4 Addresses from Dotted Decimal to Binary
Part 2: Use Bitwise ANDing Operation to Determine Network Addresses
Part 3: Apply Network Address Calculations

Background / Scenario
Every IPv4 address is comprised of two parts: a network portion and a host portion. The network portion of an
address is the same for all devices that reside in the same network. The host portion identifies a specific host
within a given network. The subnet mask is used to determine the network portion of an IP address. Devices
on the same network can communicate directly; devices on different networks require an intermediary Layer 3
device, such as a router, to communicate.
To understand the operation of devices on a network, we need to look at addresses the way devices doin
binary notation. To do this, we must convert the dotted decimal form of an IP address and its subnet mask to
binary notation. After this has been done, we can use the bitwise ANDing operation to determine the network
address.
This lab provides instructions on how to determine the network and host portion of IP addresses by converting
addresses and subnet masks from dotted decimal to binary, and then using the bitwise ANDing operation. You
will then apply this information to identify addresses in the network.

Part 1: Convert IPv4 Addresses from Dotted Decimal to Binary


In Part 1, you will convert decimal numbers to their binary equivalent. After you have mastered this activity,
you will convert IPv4 addresses and subnet masks from dotted decimal to their binary form.

Step 1: Convert decimal numbers to their binary equivalent.


Fill in the following table by converting the decimal number to an 8-bit binary number. The first number has
been completed for your reference. Recall that the eight binary bit values in an octet are based on the powers
of 2, and from left to right are 128, 64, 32, 16, 8, 4, 2, and 1.
Decimal

Binary

192

11000000

168
10
255
2

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 1 of 4

Lab Converting IPv4 Addresses to Binary

Step 2: Convert the IPv4 addresses to their binary equivalent.


An IPv4 address can be converted using the same technique you used above. Fill in the table below with the
binary equivalent of the addresses provided. To make your answers easier to read, separate the binary octets
with a period.
Decimal
192.168.10.10

Binary
11000000.10101000.00001010.00001010

209.165.200.229
172.16.18.183
10.86.252.17
255.255.255.128
255.255.192.0

Part 2: Use Bitwise ANDing Operation to Determine Network Addresses


In Part 2, you will use the bitwise ANDing operation to calculate the network address for the provided host
addresses. You will first need to convert an IPv4 decimal address and subnet mask to their binary equivalent.
Once you have the binary form of the network address, convert it to its decimal form.
Note: The ANDing process compares the binary value in each bit position of the 32-bit host IP with the
corresponding position in the 32-bit subnet mask. If there two 0s or a 0 and a 1, the ANDing result is 0. If
there are two 1s, the result is a 1, as shown in the example here.

Step 1: Determine the number of bits to use to calculate the network address.
Description

Decimal

Binary

IP Address

192.168.10.131

11000000.10101000.00001010.10000011

Subnet Mask

255.255.255.192

11111111.11111111.11111111.11000000

Network Address

192.168.10.128

11000000.10101000.00001010.10000000

How do you determine what bits to use to calculate the network address?
____________________________________________________________________________________
In the example above, how many bits are used to calculate the network address?
______________

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 2 of 4

Lab Converting IPv4 Addresses to Binary

Step 2: Use the ANDing operation to determine the network address.


a. Enter the missing information into the table below:
Description

Decimal

IP Address

172.16.145.29

Subnet Mask

255.255.0.0

Binary

Network Address
b. Enter the missing information into the table below:
Description

Decimal

IP Address

192.168.10.10

Subnet Mask

255.255.255.0

Binary

Network Address
c.

Enter the missing information into the table below:


Description

Decimal

IP Address

192.168.68.210

Subnet Mask

255.255.255.128

Binary

Network Address
d. Enter the missing information into the table below:
Description

Decimal

IP Address

172.16.188.15

Subnet Mask

255.255.240.0

Binary

Network Address
e. Enter the missing information into the table below:
Description

Decimal

IP Address

10.172.2.8

Subnet Mask

255.224.0.0

Binary

Network Address

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 3 of 4

Lab Converting IPv4 Addresses to Binary

Part 3: Apply Network Address Calculations


In Part 3, you must calculate the network address for the given IP addresses and subnet masks. After you
have the network address, you should be able to determine the responses needed to complete the lab.

Step 1: Determine whether IP addresses are on same network.


a. You are configuring two PCs for your network. PC-A is given an IP address of 192.168.1.18, and PC-B is
given an IP address of 192.168.1.33. Both PCs receive a subnet mask of 255.255.255.240.
What is the network address for PC-A? ___________________________
What is the network address for PC-B? ___________________________
Will these PCs be able to communicate directly with each other? _______
What is the highest address that can be given to PC-B that allows it to be on the same network as PC-A?
___________________________
b. You are configuring two PCs for your network. PC-A is given an IP address of 10.0.0.16, and PC-B is
given an IP address of 10.1.14.68. Both PCs receive a subnet mask of 255.254.0.0.
What is the network address for PC-A? __________________________
What is the network address for PC-B? __________________________
Will these PCs be able to communicate directly with each other? ______
What is the lowest address that can be given to PC-B that allows it to be on the same network as PC-A?
___________________________

Step 2: Identify the default gateway address.


a. Your company has a policy to use the first IP address in a network as the default gateway address. A host
on the local-area network (LAN) has an IP address of 172.16.140.24 and a subnet mask of
255.255.192.0.
What is the network address for this network?
___________________________
What is the default gateway address for this host?
___________________________
b. Your company has a policy to use the first IP address in a network as the default gateway address. You
have been instructed to configure a new server with an IP address of 192.168.184.227 and a subnet
mask of 255.255.255.248.
What is the network address for this network?
___________________________
What is the default gateway for this server?
___________________________

Reflection
Why is the subnet mask important in determining the network address?
_______________________________________________________________________________________
_______________________________________________________________________________________

2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 4 of 4

You might also like