60% found this document useful (5 votes)
12K views1 page

Mahindra Scorpio Remote Programming

The document provides instructions for learning a new remote for the central door lock system in a Scorpio vehicle. It explains that a maximum of two remotes can be programmed, and outlines the seven step procedure to register the remote which involves using the valet switch while the ignition is on and pressing the lock button on the remote.

Uploaded by

Master Xeoto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
60% found this document useful (5 votes)
12K views1 page

Mahindra Scorpio Remote Programming

The document provides instructions for learning a new remote for the central door lock system in a Scorpio vehicle. It explains that a maximum of two remotes can be programmed, and outlines the seven step procedure to register the remote which involves using the valet switch while the ignition is on and pressing the lock button on the remote.

Uploaded by

Master Xeoto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

LEARNING OF SCORPIO REMOTE

Enclosing the procedure for learning remote in Scorpio (new Remote). Due to security
reasons, ensure that the mail is not forwarded to anyone. Also , it will be good if the
re-learning is done under your control.
Maximum of 2 remotes can be re-programmed (2 memory slots)
Procedure for Remote Learning/Tuning to CDL (Central door lock) Unit:
1. Open the door.
2. Turn Ignition ON.
3. Press & Release the Valet Switch. ( In the glove Box)
4. Press & Hold Valet Switch.
5. After hearing a siren chirp Press Lock Button on Remote, it would be followed by a
short chirp confirming Remote registration.( In case of 2 Remotes, press Lock Button
on second remote immediately which would also be followed by a Chirp.
6. Release Valet Switch.
7. Set the IGN to Off.

You might also like