Scribd
Upload
74 views

Explosion Proof Junction Box For Detect-A-Fire Units

Fenewal JB for Fire/Heat Sensor

Uploaded by

vikkoo7
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
74 views

Explosion Proof Junction Box For Detect-A-Fire Units

Fenewal JB for Fire/Heat Sensor

Uploaded by

vikkoo7
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Explosion Proof Junction Box

for Detect-A-Fire Units


P/N 06-116317-001, cast by CCH
F-12-04 Effective: May 2009

www.prevent-a-fire.eu

FEATURES
Complies with NEC Class 1, Groups A, B, C, D
Class II, Group E, F, G
Class III
U.L., Standard 886

DESCRIPTION
The P/N 06-116317-001 Explosion Proof Junction
Box is intended for use with the Series 27100 and
28000 Vertical Detect-A-Fire (DAF) Units when
being installed in hazardous areas requiring
explosion proof fittings. Refer to the following table
and markings on the detector for hazardous location
suitability. For installation details, refer to the DAFdocument. For European sales or European
installation the unit is adopted to LICOs HDL4 box,
mfg by CCH and is then covered by LICOs ISO9001
Data based on 2009 Fenwal F-12-04 Rev AA

Figure 1.

Hazardous Location

DAF-Model
Number

in. (13 mm) NPT

Class I*, Groups A, B,


C and D; Class II*,
Groups E, F and G

27120-22
27121-20
28020-3
28021-5

Class I*, Groups B, C


and D; Class II*,
Groups E, F and G

27120-0
27121-0
28021-0

*Division 1 and 2

Explosion Proof Junction Box

Fitting Required
for UL, ULC
Listings and FM
Approval
Mount detector to
a suitably listed
fitting in
accordance with
National Electric
Code and/or
local authority
having
jurisdiction.

This is our LICO HDL4-Box


/ Fenwal 116317
/ Cast by CCH

www.prevent-a-fire.eu

MATERIALS:
Body: Feraloy Cover: Copper-free aluminum
FINISHES:
Body: Electro-galvanize and aluminum acrylic paint
Or Natural , Cover: Natural
OPENING:
Screw down Lid, Fixing Screw (Imbus/Hex key)
ELECTRIC GROUNDING:
Built-in Grounding Terminal
CONNECTIONS: Detect-A-Fire-Sensor: 1/2NPT,
Pipe connection: NPT or custom specification

Extended leads
available on
request, minimum
order may apply.

Through-wall mounting possible


with Double-thread 28000
Series Detect-A-Fire-Sensors

This literature is provided for informational purposes only. FENWAL, assumes no responsibility for the
products suitability for a particular application. The product must be properly applied to work correctly.
Shipment is either LICO HDL4 box or Fenwal or Cooper CCH.
If you need more information on this product, or if you have a particular application problem or question,
contact LICO Electronics GmbH, A-2320 Kledering. email: [email protected] or [email protected]

www.mess-regeltechnik.at

LICO Electronics GmbH


Klederinger Str. 31
A-2320 Kledering ,Austria
Tel + 43 1 706 43 000
Fax +43 1 706 41 31
E-mail: [email protected]

Options
www.prevent-a-fire.eu

Fittings of any kind:


Stainless Steel or Brass/Nickel

HDL4-box

Brackets:

Modifications:
With any kind of modification (Sensor, Adapter, Fittings, seal, bracket, tubing, hose, etc. , the box exclusively is
sold as LICO HDL4-xxx*) acc. to HDL spec data sheets*)

www.mess-regeltechnik.at

You might also like