Scribd
Upload
177 views4 pages

Thread o Ring Flanged Fitting

Thread o ring flange fitting

Uploaded by

sureshisisis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
177 views4 pages

Thread o Ring Flanged Fitting

Thread o ring flange fitting

Uploaded by

sureshisisis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

THREAD-O-RING Flanged Fitting

Size: 2-inch

Bulletin No: 2100.019.00


Date: September 2008
Cross Indexing No: n/a
Supersedes: n/a

Typical Setup Using


THREAD-O-RING Flanged Fittings
STOPPLE
Plugging Machine
THREAD-O-RING
Flanged Fittings

TDW THREAD-O-RING Flanged Fittings are used for blowdown of the


isolated pipe section following a double STOPPLE operation.

THREAD-O-RING Flanged Fittings

Description

Features

THREAD-O-RING Flanged Fittings are used with


TDW Tapping Machines as purge and equalization
fittings. They can also be installed during new
construction and used for blowdown connections
on either side of a block valve.

The complete THREAD-O-RING Flanged Fitting


consists of: flange, plug, O-ring, and blind flange kit.

In addition, the THREAD-O-RING Flanged Fitting


will accept the corrosion test coupons, thermometer
wells, gauge adapters and other instrument probes.

The 2-inch THREAD-O-RING Plugs are set using


either the T-101 Drilling Machine or the 360 Tapping
Machine.

The THREAD-O-RING Flanged Fitting has a


maximum operating pressure per the ANSI Class
and Schedule and has a maximum operating
temperature of 180F (82C).

One of the many uses of the THREAD-O-RING


Flanged Fitting is as a purge and equalization fitting
during tapping operations on pipelines and plant
piping.

THREAD-O-RING Flanged Fitting taps can be


made without shutdown using the TDW T-101
Drilling Machine or the 360 Tapping Machine.

ISO 9001 Certified

Toll Free

1-888-TDWmSon (839-6766)

T.D. Williamson, Inc.

P.O. Box 3409

Tulsa, Oklahoma 74101-3409

918-447-5100

Fax: 918-446-6327

www.tdwilliamson.com

Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright 2008. All rights reserved T.D. Williamson, Inc. / Printed in USA

Dimensions and Part Numbers

THREAD-O-RING Flanged Fitting

2100.019.00- p2

Dimensions

Size

Inches mm
2 50

H for 6
and larger pipe
Inches mm
5-3/16 132

Min. Valve I.D.


Inches mm
2-1/16 52.4

Weight
Lb. Kg. Part Number
6-1/2 2.9
See Chart

37.5

Weld Detail

FR-NNBB-PMRR-CC

.062

2 (DN 50) TDW THREAD-O-RING Flanged Fitting


Flange Material
NN
Flange Material & Class
00
ASTM A105N, 150 LB
01
ASTM A105N, 300 LB
02
ASTM A105N, 400 & 600 LB
03
ASTM A105N, 900 & 1500 LB
04
ASTM A350 LF2 CL1, 150 LB
05
ASTM A350 LF2 CL1, 300 LB
06
ASTM A350 LF2 CL1, 400 & 600 LB
07
ASTM A350 LF2 CL1, 900 & 1500 LB
08
ASTM A182 F304L STAINLESS, 150 LB
09
ASTM A182 F304L STAINLESS, 300 LB
10
ASTM A182 F304L STAINLESS, 400 & 600 LB
11
ASTM A182 F304L STAINLESS, 900 & 1500 LB

T.D. Williamson, Inc.

P.O. Box 3409

Part Number
00-0465-0001-XX
00-0465-0002-XX
00-0465-0004-XX
00-0465-0005-XX
00-8833-0001-XX
00-8833-0002-XX
00-8833-0004-XX
00-8833-0005-XX
00-8835-0001-XX
00-8835-0002-XX
00-8835-0004-XX
00-8835-0005-XX

Tulsa, Oklahoma 74101-3409

Schedule


BB
00
01
02
03

Flange
Part Number
00-XXXX-XXXX -04
00-XXXX-XXXX -03
00-XXXX-XXXX -02
00-XXXX-XXXX -01

Schedule
10
40
80
160

Maximum Allowable Operating Pressure

Based on Hoop Stress at Weld Hub


Using .72 Design Factor -in psi
Schedule

Class Material
10 40 80 160
150
285 285 285 285
300 ASTM A 105N 740 740 740 740
400
AND
990 990 990 990
600 A350 LF2 CL1
1480 1480 1480 1480
900
2220 2220 2220 2220
1500
2375 3405 3705 3705
150
285 285 285 285
300
740 740 740 740
400 ASTM A182 F304L 990 990 990 990
600
1480 1480 1480 1480
900
1650 2220 2220 2220
1500
1650 2365 3300 3705

918-447-5100

Fax: 918-446-6327

www.tdwilliamson.com

Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright 2008. All rights reserved T.D. Williamson, Inc. / Printed in USA

Dimensions and Part Numbers

THREAD-O-RING Flanged Fitting

2100.019.00- p3

Blind Flange Kit


CC
00
01
02
03
04
05
06
07
08
09
10
11
99

ANSI Class
150
300
400 & 600
900 & 1500
150
300
400 &600
900 & 1500
150
300
400 & 600
900 & 1500
No Blind Flange Kit

Material
ASTM A105N
ASTM A105N
ASTM A105N
ASTM A105N
ASTM A-350 LF 2 CL
ASTM A-350 LF 2 CL
ASTM A-350 LF 2 CL
ASTM A-350 LF 2 CL
ASTM 182 F304L ST
ASTM 182 F304L ST
ASTM 182 F304L ST
ASTM 182 F304L ST

Part Number
06-8041-0215-00
06-8041-0230-00
06-8041-0260-00
06-8041-0290-00
26-1078-0215
26-1078-0230
26-1078-0260
26-1078-0290
26-2223-0215
26-2223-0230
26-2223-0260
26-2223-0290

Plug Material
PM
00
01
02
03
04
05
06
08
12
13
14
15

O-Ring Material

Plug Material
ASTM B-16 Yellow Brass (Std. Matl)
ASTM C1213/1215 CF Stl.
ASTM 304 CF SST
ASTM 316 CF SST
Aluminum, 6061-T6
ASME SA350 LF2
ASTM 303 CF SST
4140 CF Steel
ASTM A105 Normalized
ASTM B148 C95400 Al Bronze
ASTM B21 C46400 Naval Brass
ASTM 304L SST

Part Number
00-4172-0100
00-4172-0200
00-4172-0600
00-4172-0400
00-4172-1200
00-4172-0500
00-4172-0300
00-4172-0800
00-4172-1300
00-4172-1400
00-4172-1500
00-4172-1600

RR
O-Ring Material
Part Number
00
No O-Ring
N/A
01
Buna-N (Standard) N674-70
00-0118-0006
02
Viton V747-75
00-1248-0002
03
Neoprene C1276-70 (Std)
00-1947-0006
04 Ethylene Propylene E540-80 (EPDM)
00-2977-0001
05
Buna-N (Low-Temp) N103-70
00-3079-0001
06
Teflon 00-1327-0001
07
Neoprene 882-K
00-1808-0003
08
Silicone Rubber
00-3781-0006
09
Neoprene 882-P
00-4677-0006
10
Kalrez 00-4353-0001
11
Viton GF
00-6732-0002
12
Teflon Encapsulated Viton 00-6762-0002
13
Special Nitrile N-497
00-6932-0001
14
Viton V1238-95
00-8509-0002

Kalrez and Viton are registered trademarks of DuPont Performance Elastomers LLC Ltd.
Teflon is a registered trademark of E.I. du pontde Nemours and Company.

T.D. Williamson, Inc.

P.O. Box 3409

Tulsa, Oklahoma 74101-3409

918-447-5100

Fax: 918-446-6327

www.tdwilliamson.com

Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright 2008. All rights reserved T.D. Williamson, Inc. / Printed in USA

2100.019.00- p4

T.D. Williamson, Inc.

P.O. Box 3409

Tulsa, Oklahoma 74101-3409

918-447-5100

Fax: 918-446-6327

www.tdwilliamson.com

Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright 2008. All rights reserved T.D. Williamson, Inc. / Printed in USA

You might also like