Scribd
Upload
74 views

Special Note:: 1. Know Your Model Number

The document provides instructions for updating the BIOS for Micro-Star motherboards in two ways: using a bootable USB disk under DOS mode or using the MFLASH utility in the BIOS. It warns users not to flash the BIOS unless necessary and to know their motherboard model number and current BIOS version first. The instructions then outline downloading the matching BIOS file, extracting it to a USB drive, booting from the drive or entering MFLASH in the BIOS, selecting the BIOS file, and allowing the system to reboot after the update is complete.

Uploaded by

aliabbas4
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
74 views

Special Note:: 1. Know Your Model Number

The document provides instructions for updating the BIOS for Micro-Star motherboards in two ways: using a bootable USB disk under DOS mode or using the MFLASH utility in the BIOS. It warns users not to flash the BIOS unless necessary and to know their motherboard model number and current BIOS version first. The instructions then outline downloading the matching BIOS file, extracting it to a USB drive, booting from the drive or entering MFLASH in the BIOS, selecting the BIOS file, and allowing the system to reboot after the update is complete.

Uploaded by

aliabbas4
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

Special Note:

The BIOS and DEVICE DRIVERS contained here are exclusively for Micro-Star
products only. Micro-Star assumes no responsibility for any damages resulting
from improper use or lack of technical expertise.
WARNING!!!!!
DON'T FLASH WHEN YOUR SYSTEM IS RUNNING FINE!!!!
DON'T FLASH IF YOU DON'T KNOW WHAT YOU ARE DOING!!!!
Flash AMI UEFI BIOS by USB Disk Under DOS Mode
1. Know your model number
a. Open your case and look for the MS-XXXX number and the version number on
the motherboard between the PCI slots

b. Boot up your system & press delete key to enter BIOS screen to double
confirm BIOS version.

2. Download the BIOS that matches your motherboard and version number to
your USB device.
3. Extract the BIOS-zip file that you have downloaded and paste it to your USB
storage device (Note: Make sure that your USB is bootable).
4. Boot your system from a USB storage device
5. When you get the DOS prompt, execute the following sequence:

6. Reboot your system when prompted

7. After bios update is done, C: prompt will appear on your screen.


Flash AMI UEFI BIOS by MFLASH
1. Know your model number
a. Open your case and look for the MS-XXXX number and the version number on
the motherboard between the PCI slots
b. Boot up your system & press delete key to enter BIOS screen to double
confirm BIOS version.

2. Download the BIOS that matches your motherboard and version number to
your USB device.
3. Extract the BIOS-zip file that you have downloaded and paste it to your USB
storage device.
4. Press delete key to BIOS, select Utility and select M-Flash

5. Click Select one file to update BIOS

6. Select USB storage that comes with the downloaded BIOS.


(below shows the USB storage device use for bios update).

7. Select BIOS which you want to update and press Enter.

8. After finish updating BIOS, the system will auto reboot.

You might also like