Scribd
Upload
60 views1 page

Calibration Data History: Form QA010 REV B

This document summarizes the calibration history of a Mitutoyo micrometer with identification number #9001415 located in the press room. It was last calibrated on September 14, 2009 by an individual and found to be within the acceptable tolerance of +/- 0.0001 using gauge blocks. The micrometer is due for its next calibration on September 14, 2010 and has not required repairs during previous annual calibrations from 2004 to 2009.

Uploaded by

pchakkrapani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
60 views1 page

Calibration Data History: Form QA010 REV B

This document summarizes the calibration history of a Mitutoyo micrometer with identification number #9001415 located in the press room. It was last calibrated on September 14, 2009 by an individual and found to be within the acceptable tolerance of +/- 0.0001 using gauge blocks. The micrometer is due for its next calibration on September 14, 2010 and has not required repairs during previous annual calibrations from 2004 to 2009.

Uploaded by

pchakkrapani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Calibration Data History

Identification Number: #9001415


Description: Micrometer, Digimatic, 0-1

Manufacturer: Mitutoyo
Model Number: 293-766-30

Location: Press Room


Last Calibrated: 09/14/09

By: add your name

Results: Accepted

Check Method: Gauge blocks (Grade 2 Master Set) serial #232261


Acceptance Criteria: +/-.0001
Calibration Due: 09/14/10
Measurement Points: .0000 .2500 .5000 .7500 (5 places)
Repair History:
Date
09/16/04
09/16/05
09/16/06
09/14/07
09/14/08
09/14/09

Form QA010 REV B

Action Taken/Results
None required (.00000 / .25000 / .50005 / .75000)
None required (.00000 / .25000 / .50005 / .75000)
None required (.00000 / .25000 / .50000 / .75005)
None required (.00000 / .25005 / .50005 / .75000)
None required (.00000 / .25005 / .50005 / .75000)
None required (.00000 / .25005 / .50005 / .75010)

You might also like