Scribd
Upload
29 views1 page

Wireless Address Able Smoke Detector

The AW103SD is a wireless addressable optical smoke detector that uses a sensitive sensor to detect smoke at early stages of fire. It has electronic addressing capabilities to help locate the specific device signaling an alarm. The detector operates on alkaline batteries and uses a radio circuit to communicate alarm signals to a fire alarm system network. It has a low-profile design that blends into any environment and provides indications for normal operation as well as alarm, pre-alarm, contamination, and low battery warnings.

Uploaded by

Balasubramani G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
29 views1 page

Wireless Address Able Smoke Detector

The AW103SD is a wireless addressable optical smoke detector that uses a sensitive sensor to detect smoke at early stages of fire. It has electronic addressing capabilities to help locate the specific device signaling an alarm. The detector operates on alkaline batteries and uses a radio circuit to communicate alarm signals to a fire alarm system network. It has a low-profile design that blends into any environment and provides indications for normal operation as well as alarm, pre-alarm, contamination, and low battery warnings.

Uploaded by

Balasubramani G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

D ATA S H E E T

Wireless Addressable

Optical Smoke Detector


Model - AW103SD

Overview:
Smoke is an initial indication of fire and hence, smoke sensors are widely used for fire detection. Addressing
capabilities help in tracking the specific signaled device pointing to the origin of fire in no time. Batteries
power AW103SD detectors that employ a highly sensitive sensor that can detect smoke at very early stages
of fire. Wireless addressable smoke detectors specify intelligent information that include pre-alarm, alarm,
contamination and low battery warnings. This unit is incorporated with a radio circuit to signal the alarm
system network.

Features:

Specifications:

Electronic addressing

Electrical Specifications

Dual bi-color LED indication for

Operating voltage

3V

Quiescent current

3 A

Alarm current

1 mA

Battery Type

Alkaline Battery(2x1.5V)

Carrier frequency

433.92 MHz

360 viewing angle

Insect-resistant screening

Low-profile design that blends


with any environment

Easy to maintain/service

Indications
Normal

Green LED (Blinks 50 +/- 10 sec)

Alarm

Red LED (Glows steady)

Compatibility

ALAW2XV1 Protocol

General Specifications
Operating temperature

0C to 49C

Storage temperature

5C to 40C

Humidity

0-95% RH (Non-condensing)

Color

White

Housing

Polycarbonate

Mechanical Specifications
Dimensions(DiaxH)

Without Base 100x49mm


With Base

Weight

100x54mm

Without Base 78g


With Base

108g

A l l t e c h n i c a l f e at u re s a n d d at a a re s u b j e c t t o c h a n ge s w i t h o u t n o t i c e ,
re s u l t i n g f ro m c o n t i n u o u s d e v e l o p m e n t a n d i m p r o v e m e n t

5203-001-V1.0-06.05.2015

You might also like