Scribd
Upload
602 views1 page

14-101-R1 Spark Gap EXFS L

Ex isolating spark gaps EXFS L are used to indirectly connect functionally separate parts of installations, such as isolated pipe sections with cathodic corrosion protection. They provide approved safety according to European standards and have a long service life due to arc-resistant tungsten-copper electrodes. The prewired spark gaps come with connecting cables of various lengths and accessories like brackets that allow for easy installation between pipeline flanges.

Uploaded by

sisproint
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
602 views1 page

14-101-R1 Spark Gap EXFS L

Ex isolating spark gaps EXFS L are used to indirectly connect functionally separate parts of installations, such as isolated pipe sections with cathodic corrosion protection. They provide approved safety according to European standards and have a long service life due to arc-resistant tungsten-copper electrodes. The prewired spark gaps come with connecting cables of various lengths and accessories like brackets that allow for easy installation between pipeline flanges.

Uploaded by

sisproint
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SURGE PROTECTION

Spark gap: EXFS L

German Cathodic Protection

Document No.: 14-101-R1


Sheet: 1 of 1

Ex isolating spark gaps EXFS L are used for conductive system parts
which cannot be interconnected directly in hazardous zones. This includes,
for example, pipe sections supplied with a cathodic corrosion protection
system.
ATEX certified EXFS L spark gaps provide approved and tested safety
according to harmonised European standards.
The arc-resistant tungsten-copper electrodes ensure a long service life
of the Ex spark gaps.
The approved type EXFS L with flexible conductor connection adjusts
itself quickly to any application environment. The prewired spark gaps
include connecting cables of different lengths with cable lugs, M10 screws
and nuts. Flat or angled connection brackets (IF), which are available as
accessories, allow for easy connection of the spark gap at pipeline flanges.

Connection bracket

26

44

Application
An isolating spark gap makes an indirect connection between functionally
separate parts of an installation, e.g. isolated earth-termination systems.
It can be used to bridge insulating pieces, insulating couplings and
insulating flanges on installations with cathodic corrosion protection parts
of an installation, such as pipelines or tanks, or as a measure of lightning
equipotential bonding according to DIN VDE 0185.
Terminal height H
Size
IF 1
IF 3
1
H = 0.08 m H = 0.10 m
2
H = 0.10 m H = 0.12 m
3
H = 0.14 m
---

EXFS L ...: Ex isolating spark gap for above ground installation

EXFS L100

13

67

EXFS L200

EXFS L300

Lightning impulse current

50 kA

50 kA

50 kA

Classfication of lightning current carrying capability acc. to EN 50164-3

Nominal discharge current (8/20 s)

100 kA

100 kA

100 kA

100% lightning impulse sparkover voltage

2.5 kV

2.5 kV

2.5 kV

Power frequency sparkover voltage (50 Hz)

1.2 kV

1.2 kV

1.2 kV

Type of protection according to EN 50014, EN 50021

II 3 G EEx nC II T4

II 3 G EEx nC II T4

II 3 G EEx nC II T4

Operating temperature range [TU]

-20C...+80C

-20C...+80C

-20C...+80C

Degree of protection

IP 54

IP 54

IP 54

Approvals, Certifications

ZELM 03 ATEX 3192X

ZELM 03 ATEX 3192X

ZELM 03 ATEX 3192X

Length of enclosure

90 mm

90 mm

90 mm

Diameter of enclosure

63 mm

63 mm

63 mm

Enclosure material

zinc die casting, plastic

zinc die casting, plastic

zinc die casting, plastic

Connecting cable

H01N2-D 25 mm2

H01N2-D 25 mm2

H01N2-D 25 mm2

with cable lug and M10 screw / nut

with cable lug and M10 screw / nut

with cable lug and M10 screw / nut

Cable length

100 mm

200 mm

300 mm

Suitable for flange size

20 - 130 mm

120 - 230 mm

220 - 320 mm

You might also like