Scribd
Upload
44 views

Bms Institute of Technology and Management: Part A

The document contains an internal examination for a Building Planning and Drawing subject from BMS Institute of Technology and Management. It includes 5 questions - the first asks students to draw the plan, section, elevation and schedule of openings for a single line diagram. The second asks students to draw the plan, section and cross section of a reinforced concrete column and footing. The third asks students to prepare a water supply and electrical layout for another line diagram. The fourth asks students to develop a bubble diagram and line diagram for a primary health center. And the fifth asks students to draw the plan and sectional elevation of a reinforced concrete doglegged staircase.

Uploaded by

Manish Shashikant Dharek
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
44 views

Bms Institute of Technology and Management: Part A

The document contains an internal examination for a Building Planning and Drawing subject from BMS Institute of Technology and Management. It includes 5 questions - the first asks students to draw the plan, section, elevation and schedule of openings for a single line diagram. The second asks students to draw the plan, section and cross section of a reinforced concrete column and footing. The third asks students to prepare a water supply and electrical layout for another line diagram. The fourth asks students to develop a bubble diagram and line diagram for a primary health center. And the fifth asks students to draw the plan and sectional elevation of a reinforced concrete doglegged staircase.

Uploaded by

Manish Shashikant Dharek
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BMS INSTITUTE OF TECHNOLOGY AND MANAGEMENT

YELAHANKA BANGALORE - 64
DEPARTMENT OF CIVIL ENGINEERING
INTERNAL EXAMINATION, May- 2015
Subject: Building Planning&Dwg. Subject Code: 10CV46
Branch & Semester : IV Civil
Max. Marks : 100
Date: 19-05-2015.
Time: 9:30 AM to 1:30PM
Note: Part A is compulsory. Answer any 2 full questions from Part B. Missing data if any shall be assumed and
shall be clearly indicated in the drawing sheet

Part A
1.

For the Single line diagram shown in Fig(1). Draw the plan, Section, Elevation. Indicate the schedule of
openings. Assume all walls of the building are 300mm thick. The standard size of Windows, doors,
ventilators shall be assumed and shall be clearly indicated
a)Plan of the building at sill level (25 )
b)Front Elevation(15 )
c)Section @ A-A(15)
d)Schedule of Openings(05)

Part B
2.

A RCC column 400x400mm is resting on a flat square R C Footing. The column consists of 6-20# with 2L8# lateral ties @ 200mm c/c. The footing reinforcement consists of 12# @ 125mm c/c bothways. The size of
footing is 1300mm x 1300mm, with a depth of 600mm.Draw to a suitable scale the following views
a) Plan of footing showing reinforcement details (5)
b) Vertical section of columns with footing showing reinforcement details(10)
c) Cross section of column showing reinforcement details(5)

3) For the line diagram shown in Fig (2), Prepare the following (10+10)
a) Water supply layout
b) Electrical layout

4) Develop bubble diagram and line diagram for a primary health centre to a suitable scale. The dimensions of
the components (rooms) shall be clearly indicated
a)Reception b)Doctor consultation room- 3 nos. c) Lady Doctors room- 1no d)Minor Operation Theater-1no
e)Store room f) Nurse room g) Laboratory h) X-ray room i)Dressing room j) Toilet for ladies and gents separate
k) General ward to accommodate about 15 patients.

5. Draw Plan and Sectional elevation of RCC Doglegged staircase. Floor to Floor height is 3m. Width of Stair is
1.2m.Assume tread and riser dimensions suitably

Tough Times never Last, But Tough People Do

BMS INSTITUTE OF TECHNOLOGY AND MANAGEMENT


YELAHANKA BANGALORE - 64
DEPARTMENT OF CIVIL ENGINEERING

Figure 1

Figure 2

You might also like