0% found this document useful (0 votes)
312 views2 pages

(NB24-BX40-01D) Specsheet 01152010

Low-voltage, 2 wire (class 2) 0-10Vdc control technology turns lamps off (1 Volts) at the bottom of the voltage range. Lamps can be switched back on to a previous dimming level instantly. NB24-BX40-01D State-of-the-art Phase Control operation resulting in continuous, flicker-free dimming from 100% to 10%.

Uploaded by

nextekpower
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
312 views2 pages

(NB24-BX40-01D) Specsheet 01152010

Low-voltage, 2 wire (class 2) 0-10Vdc control technology turns lamps off (1 Volts) at the bottom of the voltage range. Lamps can be switched back on to a previous dimming level instantly. NB24-BX40-01D State-of-the-art Phase Control operation resulting in continuous, flicker-free dimming from 100% to 10%.

Uploaded by

nextekpower
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

24V DC Input Electronic “Program Start “

High Efficiency Fluorescent Dimming Ballast

Nextek Power Systems

40W BIAX *
(NB24-BX40-01D)
KEY FEATURES
• Low-voltage, 2 wire (class 2)
• 0-10Vdc control technology
• Programmed rapid start design
• Ultra quiet operation
• State-of-the-art Phase Control
• 10% fluorescent dimming ballast

Tel: 313.887.1321
Web: nextekpower.com
Email: [email protected]
NB24-BX40-01D
FEATURES
• Low-voltage, 2 wire (class 2) 0-10Vdc control • State-of-the-art Phase Control operation resulting in
technology turns lamps off (<1 Volts) at the bottom of continuous, flicker-free dimming from 100% to 10%.
the voltage range. Lamps can be switched back on to a • Type 1, Class P, Sound rated A
previous dimming level instantly
• UL Listed
• Programmed rapid start design: Lamps turn on to any
dimmed level without flashing to full brightness

TECHNICAL SPECIFICATIONS
Operating Voltage: 24 V DC (nominal) ±10%
Operating Current: 1.6 Amp @ 24V DC
Minimum Starting Temperature: 0ºF
Maximum Ballast Factor: 1.0
Crest Factor: <1.55

Order on-line at http://www.nextekpower.com/power-shop/


Analog Dimming: ILDA 0-10V
Dimensions: 1.10”W x 0.96”H x 9.57”L
Weight: 16 Oz
Construction: Steel
Operated With: F40BX, F39BX, FT40

All specifications are subject to change without notice.


*BIAX® is a registered trademark of General Electric Company

DC BALLAST WIRING DIAGRAM


Model: NB24-BX40-01D
24V DC Input } Black In
Auto Polarity } Black In
Purple Dimming (+) 24V DC INPUT 40W BIAX ELECTRONIC
Gray Dimming (-)

Red Blue

Red 40W BIAX* Blue

Lamp holder must NOT be shorted

Protected by US Patent 7,224,131; 6,933,627; 6,693,395 and other patents pending

ENCLOSURE DIAGRAM
211.2 mm (8.32 in) 13.5 mm (0.53 in) 24.5 mm (0.96 in)

13.6 mm (0.53 in) 28 mm (1.10 in)

228.6 mm (9.00 in)

243.0 mm (9.75 in)

For more information: Nextek Power Systems Tel: 313.887.1321 nextekpower.com


461 Burroughs Street Toll free: 1 (877) 24-VOLTS dcballast.com
Detroit, Michigan 48202 Fax: 313.887.9433 [email protected]

You might also like