Plastic Mould Steel: Z Similar Steels
Uploaded by
Molnár SándorPlastic Mould Steel: Z Similar Steels
Uploaded by
Molnár SándorGloria Material Technology Corp.
PLASTIC MOULD STEEL 1.2738
z Similar Steels
GMTC
AISI
DIN
BUDERUS
ASSAB
1.2738
P20+Ni
1.2738
2738
ISO-BM
718
z Chemical Composition
(wt%)
Grade
DIN 1.2738
Si
Mn
Ni
Cr
Mo
0.35
0.20
1.30
Max.
Max.
0.90
1.80
0.15
0.45
0.40
1.60
0.030
0.035
1.20
2.10
0.25
z Characteristics
1. The material already process quenching and tempering heat treatment first
before dispatching from the factory in order to reduce customers cost.
2. High Hardenability.
3. Good stability in hardness.
4. The toughness and wear resistance are good , and surface is similar to mirror
after grind.
5. Easy to cut and process
6. Steel can be through nitrogenation and flame hardening treatment in order to
increase the hardness and wearability of mould surface.
Application
1. Plastic injection mould steel.
2. The mould steel for plastic products with surface gloss and semitransparent.
3. High strength mould plate, structural shaft
4. Large-scale mould .
5. The form is complicated and high-precision products
z Available Size Range
1.
2.
3.
Available Hardness Range of 1.2738 prehardened steel: HRC28-33
Ground Bar or Centerless Grinding Bar (ISO h6~h9)
Raw Bar Size:5600mm
4.
Mould Block Size :
Thickness
(mm)
Width (mm)
