Scribd
Upload
357 views

Monthly Test Question Paper Manufacturing Process

This document outlines three different test sets (A, B, C) for the Monthly Test given in February for the Manufacturing Process course at St. Thomas Institute for Science and Technology. Each test set contains two parts (Part A and Part B) worth a total of 20 marks. Part A contains two short answer questions worth 2 marks each. Part B contains two longer answer questions requiring diagrams, explanations of processes, and discussions of advantages and limitations, worth 8 marks each. The questions cover topics like metal powders, welding, casting processes and defects. Students are assigned a test set based on their roll number.

Uploaded by

Kailas Sree Chandran
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
357 views

Monthly Test Question Paper Manufacturing Process

This document outlines three different test sets (A, B, C) for the Monthly Test given in February for the Manufacturing Process course at St. Thomas Institute for Science and Technology. Each test set contains two parts (Part A and Part B) worth a total of 20 marks. Part A contains two short answer questions worth 2 marks each. Part B contains two longer answer questions requiring diagrams, explanations of processes, and discussions of advantages and limitations, worth 8 marks each. The questions cover topics like metal powders, welding, casting processes and defects. Students are assigned a test set based on their roll number.

Uploaded by

Kailas Sree Chandran
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ST.

THOMAS INSTITUTE FOR SCIENCE AND TECHNOLOGY (STIST)


FOURTH SEMESTER MECHANICAL ENGINEERING
13.402 MANUFACTURING PROCESS
MONTHLY TEST (FEB)
Time: 1 hour
Maximum Marks: 20
SET A (Roll No.: 1, 4, 7, 10, 13, 16, 19, 22, 25, 28, 31, 34, 37, 40, 43, 46, 49, 52, 55)
Answer all questions
Part A (2 x 2 marks = 4 marks)
1. Explain any four characteristics of Metal Powders.
2. Write short notes on HAZ.
Part B (2 x 8 marks = 16 marks)
3. With a neat sketch, explain Gravity Die Casting with its advantages and limitations.
4. With a neat sketch, explain Centrifugal Casting with its advantages and limitations.

ST.THOMAS INSTITUTE FOR SCIENCE AND TECHNOLOGY (STIST)


FOURTH SEMESTER MECHANICAL ENGINEERING
13.402 MANUFACTURING PROCESS
MONTHLY TEST (FEB)
Time: 1 hour
Maximum Marks: 20
SET B (Roll No.: 2, 5, 8, 11, 14, 17, 20, 23, 26, 29, 32, 35, 38, 41, 44, 47, 50, 53)
Answer all questions
Part A (2 x 2 marks = 4 marks)
1. Explain Atomization process with a neat sketch.
2. Explain any two casting defects with neat sketches. List the causes and remedies.
Part B (2 x 8 marks = 16 marks)
3. With a neat sketch, explain MIG Welding process with its advantages and limitations.
4. With a neat sketch, explain Hot Chamber Die Casting with its advantages and limitations.

ST.THOMAS INSTITUTE FOR SCIENCE AND TECHNOLOGY (STIST)


FOURTH SEMESTER MECHANICAL ENGINEERING
13.402 MANUFACTURING PROCESS
MONTHLY TEST (FEB)
Time: 1 hour
Maximum Marks: 20
SET C (Roll No.: 3, 6, 9, 12, 15, 18, 21, 24, 27, 30, 33, 36, 39, 42, 45, 48, 51, 54)
Answer all questions
Part A (2 x 2 marks = 4 marks)
1. Explain the functions of Welding Flux.
2. Write short notes on Sintering and Pre-Sintering process.
Part B (2 x 8 marks = 16 marks)
3. With a neat sketch, explain TIG Welding process with its advantages and limitations.
4. With a neat sketch, explain Continuous Casting with its advantages and limitations.

You might also like