Scribd
Upload
341 views

Cswip Iits

Industrial Inspection & Training Services (IITS) offers a Certified Welding Inspector CSWIP 3.1 (Level 2) training program and certification in Bangladesh. The program provides a preparatory course, seminar, and examination to qualify participants as welding inspectors according to international industry standards. The training covers welding processes, defects, materials, inspection techniques, and codes and standards. Participants must have welding inspection, visual inspection, or supervisory experience. Upon completion, candidates can progress to higher certifications and roles in welding inspection.

Uploaded by

Safiq Uddin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
341 views

Cswip Iits

Industrial Inspection & Training Services (IITS) offers a Certified Welding Inspector CSWIP 3.1 (Level 2) training program and certification in Bangladesh. The program provides a preparatory course, seminar, and examination to qualify participants as welding inspectors according to international industry standards. The training covers welding processes, defects, materials, inspection techniques, and codes and standards. Participants must have welding inspection, visual inspection, or supervisory experience. Upon completion, candidates can progress to higher certifications and roles in welding inspection.

Uploaded by

Safiq Uddin
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Industrial Inspection & Training Services (IITS), Bangladesh

Certified Welding Inspector CSWIP 3.1 (Level 2) Scheme

House 162, Road 01, DOHS Mirpur, Dhaka Cantonment, Dhaka-1216


Cell: 0088-01913303031, Web: www.iitsbd.com, email: [email protected]

INTRODUCTION
Industrial Inspection &
Training Services (IITS)
has entered into
an agreement
with TWI (The Welding Institute) to conduct technical training programs in Bangladesh as per the CSWIP,
NEBOSH, BGAS and NDT schemes in the field of welding, inspection, NDT, painting to meet the
requirement of the industry.

COURSE OBJECTIVES

To understand factors which influence the quality of fusion welds in steels


To recognize characteristics of commonly used welding processes in relation to quality control
To interpret drawing instructions and symbols to ensure that specifications are met
To set up and report on inspection of welds, macro sections and other mechanical tests
To assess and report on welds to acceptance levels
To confirm that incoming material meets stipulated requirements and recognize the effects on weld
quality of departure from specification
To be in a position to pass the Welding Inspector - Level 2 examinations

PARTICIPANTS
Suitable for professionals in welding industry willing to upgrade skill sets to International Industry Standards
and get the globally accepted certification. Persons who have minimum of 3 years experience in the field of
welding inspection or 5 years as welding Supervisor are eligible to attend CSWIP 3.1 Welding Inspector
course and exam as per the details are given in document CSWIP WI692 edition.

COURSE CONTENTS

The duties and responsibilities of a welding inspector


Fusion welding processes
Typical weld defects
Types of steel; carbon-manganese
Low alloy and stainless steels
Hardening of steels
Weldability
Heat treatment
Parent metal defects
Visual inspection
Testing parent metals and welds
Destructive tests
NDT techniques
Welder and procedure approval
Codes and standards
Outline of safe working practices

ENTRY REQUIREMENTS
Welding Inspector for a minimum of 3 years with experience related to the duties and
responsibilities listed in Clause 1.2.2 of CSWIP document WI-6-92, under qualified supervision,
independently verified
OR,
Certified Visual Welding Inspector (Level 1) for a minimum of 2 years with job
responsibilities in the areas listed in 1.2.1 and 1.2.2 of CSWIP document WI-6-92
OR,
Welding Instructor or Welding Foreman/Supervisor for a minimum of 5 year

PREPARATORY COURSE
A preparatory course for CSWIP 3.1 (level 2) is arranged and designed by "Industrial Inspection & Training
Services (IITS)" to ensure maximum ratio of passing. The preparatory course is conducted by professional
experienced tutor. Training consists of theory, practical sessions, effective power point presentations, quiz,
model test examination and discussions on the topics which makes you worth full to pass on the main
examination.

EXAMINATION PATTERN
Theory Part A2

General Welding Theory, Product Technology and NDT 30 multiple choice


questions 45 minutes.

Theory Part B2

Specific Welding Technology. 60 multiple choice questions. Time allowed 1hr


30 minutes.

Practical Part A2

Inspection of a plate butt weld to a code provided by the Test Centre. Time
allowed 1hr 15 minutes

Practical Part B2

Inspection of a pipe butt weld to a code provided by the Test Centre. Time
allowed 1hr 45 minutes

Practical Part C2

Inspection of a set of 2 Nos. macro test samples to a code provided by the


Test Centre. Time allowed 45 minutes

CAREER PROGRESSION

CSWIP 3.2 Welding Inspector


CSWIP/PCN Radiographic Interpretation
CSWIP Plant Inspector Level I
BGAS-CSWIP Painting Inspector Grade 3/2
BGAS-CSWIP Painting Inspector Grade I
BGAS-CSWIP Site Coating Inspector

TRAINING VENUES
House 162, Road 01, DOHS Mirpur, Dhaka Cantonment, Dhaka-1216
Certification Body

CSWIP 3.1 TRAINING & CERTIFICATION FEES STRUCTURE & DURATION


CSWIP 3.1 Preparatory Course
7 days
CSWIP 3.1 Seminar
5 days
CSWIP 3.1 Examination
1 day
Total
In word: Taka One Lac Seventy Five Thousand only.
* Excluding 15% VAT.

25,000.00
1,50,000.00
1,75,000.00

DOCUMENTS REQUIRED FOR ENROLLMENT


The following documents should be couriered after receiving CV approval email from us.
The Original Enrolment forms and CV
Payment (by Cheque or Cash)
Copy of Experience / Service certificates to be provided only if present attested service is less than 3
years.
Vision certificate format.
2 nos. PP size photographs (write full name and sign on backside of both the photos).

SCHEDULE
The course will start at 15th May' 2015 tentatively. The preparatory course, TWI trainer course and
examination is 10 days, 5 days and 1 day respectively.

CONTACT INFORMATION
Md. Sirajul islam
Director
mail: [email protected], cell: +880-1967 70 07 21
ASNT NDT Level-3 (Certificate no. 183396)
EN ISO NDT Level -3 (Certificate no. 08794-2014-02)
PCN Level 2 (Certificate no. 312413)
AWS Certified Welding Inspector (Certificate no. 14124111)

Md. Safiq Uddin


Technical Manager
mail: [email protected], cell: +880-1967 70 07 22
ASNT NDT Level-2
Radiation Control Officer (BAEC)

You might also like