Scribd
Upload
7 views

Control of Photovolatic System Abstract

The document discusses controlling a photovoltaic system with a DC-DC boost converter fed DSTATCOM using an IcosØ algorithm. The boost converter steps up the voltage from a PV array or battery to match the DC link voltage of the DSTATCOM for continuous compensation. The performance of controlling the DSTATCOM with Synchronous Reference Frame theory and IcosØ algorithm is compared. The proposed system is tested in MATLAB/SIMULINK simulations.

Uploaded by

nandhaku2
Copyright
© © All Rights Reserved
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
7 views

Control of Photovolatic System Abstract

The document discusses controlling a photovoltaic system with a DC-DC boost converter fed DSTATCOM using an IcosØ algorithm. The boost converter steps up the voltage from a PV array or battery to match the DC link voltage of the DSTATCOM for continuous compensation. The performance of controlling the DSTATCOM with Synchronous Reference Frame theory and IcosØ algorithm is compared. The proposed system is tested in MATLAB/SIMULINK simulations.

Uploaded by

nandhaku2
Copyright
© © All Rights Reserved
Available Formats
Download as RTF, PDF, TXT or read online on Scribd
You are on page 1/ 2

Control of Photovoltaic System with A

DC-DC Boost Converter Fed DSTATCOM


Using ICOS Algorithm
Abstract:
In this Project the Photovoltaic (PV) array or battery operated DC-DC
boost converter fed three-leg VSC based DSTATCOM has been carried out for
reactive power compensation, source harmonic reduction and load current
compensation in the distribution system. The boost converter is used to step
up the voltage so as to match the dc link voltage of the three-leg VSC based
DSTATCOM for continuous compensation. The DSTATCOM was controlled by
SRF theory and Icos algorithm.
In general the increased usage of electricity in the modern day, the
economic co operations of a power system with a greater focus on power
quality. So that the renewable energy source based power quality
improvement in the power distribution system. Nonlinear loads of power
electronic devices create major power problem in the distribution system
which tends to power quality problem.
So, in this project a three-phase three-wire Distribution Static
Compensator (DSTATCOM) which is fed by Photovoltaic (PV) array or battery
operated DC-DC boost converter. DC-DC boost converter is used for reactive
power

compensation,

source

current

harmonics

reduction

and

load

compensation in the distribution system. The DSTATCOM is a custom power


device consists of a three-leg voltage source converter (vsc) with a dc bus
capacitor.
The PV array or battery operated boost converter is proposed to
maintain the dc link voltage of the dc bus capacitor for continuous
compensation for the load. To evaluate the performance comparison of two
control strategies for extracting the reference currents to control the
proposed DSTATCOM. The two control methods are Synchronous Reference
Frame (SRF) theory and Icos algorithm.

The entire proposed system will be tested using MATLAB/SIMULINK and


the

simulation

results

demonstrate

the

attractive

performance

characteristics of the proposed control of photovoltaic system with a DC-Dc


boost converter fed DSTATCOM using Icos Algorithm.

You might also like