Scribd
Upload
81 views2 pages

Jc95 Man Web

The document provides specifications and setup instructions for the Jerry Cantrell Signature Cry Baby WAH WAH pedal. It is powered by a 9-volt battery or AC adapter and features a filter center frequency range of 320-2070 Hz adjustable via the heel and toe. Setup involves connecting the guitar to the pedal's input and the pedal's output to the amplifier. The pedal is turned on/off by pressing the toe switch and its tone can be adjusted with the fine tune knob.

Uploaded by

overdrive0
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views2 pages

Jc95 Man Web

The document provides specifications and setup instructions for the Jerry Cantrell Signature Cry Baby WAH WAH pedal. It is powered by a 9-volt battery or AC adapter and features a filter center frequency range of 320-2070 Hz adjustable via the heel and toe. Setup involves connecting the guitar to the pedal's input and the pedal's output to the amplifier. The pedal is turned on/off by pressing the toe switch and its tone can be adjusted with the fine tune knob.

Uploaded by

overdrive0
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

92503009532revB

THE ORIGINAL SINCE 1967

JC95 JERRY CANTRELL Cry Baby WAH WAH

POWER

The Jerry Cantrell Signature Cry Baby


Wah Wah is powered by one 9-volt battery
(accessed v ia the bottom of the pedal),
an AC adapter such as the Dunlop ECB003/
ECB003E, or a DC Brick power supply.

SPECIFICATIONS
Impedance
Input
Output

1 M
10 k

Run a shielded instrument cable from your


guitar to the JC95s INSTRUMENT jack.

SETUP INSTRUCTIONS

Filter Center Frequency


Heel Down
320 Hz to 390 Hz
Toe Down
Fine Tune Max
1700 Hz to 2070 Hz
Fine Tune Min
1050 kHz to 1270 Hz

Run another shielded instrument cable


from the JC95s AMPLIFIER jack to
your a mplifier input.

Maximum Level
Input
Output

Turn on the amplifier and begin playing.

Maximum Gain at Center Frequency


Heel Down
+18 dB
Toe Down
+20 dB
Noise Floor*
Heel Down
>97 dB
Toe Down
>89 dB
Bypass Hardwire
Current Draw
1 mA
Power Supply
9 volts DC

To turn the pedal on/off, push the toe of


the pedal down until you feel a click.
Rotate the FINE TUNE knob clockwise for a
brighter toe-down response or counterclockwise for a darker toe-down response.

*VREF=1VRMS, A-weighted

-11.5 dBV
+6 dBV

You might also like