Scribd
Upload
144 views46 pages

Telecom Network Command Guide

The document contains commands used to check and configure various 2G radio network parameters. This includes checking cell frequencies and neighbor relations, configuring hopping status and power levels, identifying radio equipment, blocking and unblocking transmitters, and setting parameters like CRO, PT and signal strength thresholds.

Uploaded by

Amber Francis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
144 views46 pages

Telecom Network Command Guide

The document contains commands used to check and configure various 2G radio network parameters. This includes checking cell frequencies and neighbor relations, configuring hopping status and power levels, identifying radio equipment, blocking and unblocking transmitters, and setting parameters like CRO, PT and signal strength thresholds.

Uploaded by

Amber Francis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 46

Command

RLDEP:CELL=0290811
RLccP:CELL=G536151;
RLCFP:CELL=G15982;
RLDEP:CELL=G10351;
RLNRP:CELL=G339251,CELLR=all;
RLNRP:CELL=G67451,CELLR=all,nodata;
RLNRP:CELL=G67451,CELLR=all,utran;
RLMFP:CELL=G36832;
RLCHP:CELL=G88282;
rlchc:cell=G18242,CHGR=1,HOP=on;
RLLHP:CELL=S100110;
RLGSP:CELL=G222742;
RLSBP:CELL=G67451;
RLLOP:CELL=G67451;
RLGRP:CELL=G112832;
RAEPP:ID=ALL;
RLdhp:CELL=G10051;
rlslp:cell=G733431
RXASP:MO=RXOTG-22;
RLDHC:CELL=G12345,DHA=ON,DTHAMR=15,DTHNAMR=15;
RXTCP:MOTY=RXOTG,CELL=G10351;
RCMOP:MO=RXOTX-28-0;
RXCDP:MO=RXOTG-28;
RXMFP:MO=RXOTG-28,subord;
RLSBP:CELL=G67451;
rlsbc:cell=G775151,cro=6,PT=31;
ratrp;
ioifp:file=ctrfile;
ioifc:file=ctrfile,maxsize=No;
ioife:file=ctrfile;
cpfife ctrfile
ratri:cell=G01672,dtime=60,rtype=ev&me,event=ca;
iofat:file=ctrfile-0137,hex;
eritrace ctr0002.hex beacf ctr

Description
(Checks FF)CELL UTRANID
0290811 234-15-211-61723-731
Check the Freq
BSIC & other information
All relation with parameter values.
All relation.
3G relations.
BA_List.
Check HOPPING status
change status of hopping
Check LayerThr
Check GPRS
Check CRO,PT
Check BS/MSRXMIN
Check the RP
Check BSC level parameter
DTHAMR, DHA is ON etc
check status of the tch
Give alarm status on cell
change dthamr and dtnamr
Identify the RXOTG id
TG to Cell
TG to freq (room for TRX)
Set Dump
Cro , PT

RLCFE:CELL=G01672,CHGR=1,DCHNO=996;
RLCFI:CELL=G01672,CHGR=1,DCHNO=982;

Delete Freq (OLD)


Insert Freq (NEW)

Check for recirding status


Next available file.
Remove the file
Hold Next available file.
Hold Next available file. APG40 only
Initiate CTR
Set Dump
Convert to CSV

10712

FDDARFCN
142
49

RLCCC:CELL=G347492,sdcch=4,tn=1&2,chgr=0;

Allocate 2 SDCCH on PGSM - TRX

rxtcp:cell=g00521,moty=rxotg; Tg value eg 121


rxcdp:mo=rxotg-121; shows the config of ts and TRUs

rxasp:mo=rxotg-121; equipment alarm


rxasp:mo=rxocf-121; equipment alarm
rxtcp:cell=G101452,moty=rxotg;
rxcdp:mo=rxotg-141;
rlcrp:cell=g101452;
rxcap:MO=rxocf-141;
rxapp:mo=rxotg-141;

check e1

rllop:cell=G13282;
rlloc:cell=G13282,msrxmin=100;
rldep:cell=G18943;

check msrxmin
change msrxmin value
mfrms. To change need to halt the cell first

rlsvp:cell=G10051;

check power saving feature

rlstc:cell=G11761,chgr=1,state=halted
rxmop:mo=rxotrx-190-2;
RXBLI:MO=rxotrx-29-3,subord
RXBLE:MO=rxotrx-29-3,subord

lock egsm channels


check frequency of 3rd trx
block trx.
DEBLOCK TRX. Sometime you may have to halt and ac

rxmfp:mo=rxocf-174;
rxmop:mo=rxotg-174;

to get cdu type

Command
RLCFP:CELL=G15982;
RLDEP:CELL=G10351;
RLNRP:CELL=G339251,CELLR=all;
RLNRP:CELL=G67451,CELLR=all,nodata;
RLNRP:CELL=G67451,CELLR=all,utran;
RLMFP:CELL=G36832;
RLCHP:CELL=G88282;
RLLHP:CELL=S100110;
RLGSP:CELL=G222742;
RLSBP:CELL=G67451;
RLLOP:CELL=G67451;
RLGRP:CELL=G112832;
RAEPP:ID=ALL;
RLdhp:CELL=G10051;
rlslp:cell=G733431
RXASP:MO=RXOTG-22;

Description
Check the Freq
BSIC & other information
All relation with parameter values.
All relation.
3G relations.
BA_List.
Check HOPPING status
Check LayerThr
Check GPRS
Check CRO,PT
Check BS/MSRXMIN
Check the RP
Check BSC level parameter
DTHAMR
check status of the tch
Give alarm status on cell

RXTCP:MOTY=RXOTG,CELL=G10351;
RCMOP:MO=RXOTX-28-0;
RXCDP:MO=RXOTG-28;
RXMFP:MO=RXOTG-28,subord;

Identify the RXOTG id


TG to Cell
TG to freq (room for TRX)
Set Dump

ratrp;
ioifp:file=ctrfile;
ioifc:file=ctrfile,maxsize=No;
ioife:file=ctrfile;
cpfife ctrfile
ratri:cell=G01672,dtime=60,rtype=ev&me,event=ca;
iofat:file=ctrfile-0137,hex;
eritrace ctr0002.hex beacf ctr

Check for recirding status


Next available file.
Remove the file
Hold Next available file.
Hold Next available file. APG40 only
Initiate CTR
Set Dump
Convert to CSV

RLCFE:CELL=G01672,CHGR=1,DCHNO=996;
RLCFI:CELL=G01672,CHGR=1,DCHNO=982;
RLCCC:CELL=G347492,sdcch=4,tn=1&2,chgr=0;

Delete Freq (OLD)


Insert Freq (NEW)
Allocate 2 SDCCH on PGSM - TRX

rxtcp:cell=g00521,moty=rxotg; Tg value eg 121


rxcdp:mo=rxotg-121; shows the config of ts and TRUs

rxasp:mo=rxotg-121; equipment alarm


rxasp:mo=rxocf-121; equipment alarm
rxtcp:cell=G101452,moty=rxotg;
rxcdp:mo=rxotg-141;
rlcrp:cell=g101452;
rxcap:MO=rxocf-141;
rxapp:mo=rxotg-141;

check e1

RLSLP:CELL=G12345;
RLCFP:CELL=G12345;
RLCRP:CELL=G12345;
RLSTP:CELL=G12345;
RXTCP:CELL=G12345,MOTY=RXOTG;

DISPLAYS NO. OF SUPERVISION LEVELS - STATUS


DISPLAYS NO. OF FREQS / HOPING STATUS
DISPLAYS NO. OF TCHS / ICM BAND
CHECKS IF SITE IS ACTIVE OR HALTED
FINDS MO FOR THAT SITE

RLMFP:CELL=G12345;
RLMSP:MO=RXOTG-123;
RLMSP:MO=RXO(CF)-123;
RLMSP:MO=RXOTF-123;
RLMSP:MO=RXOTRX-123-0;
RLMSP:MO=RXOTX-123-0;
RLMSP:MO=RXORX-123-0;
RLMSP:MO=RXOTS-123-0-0&&-7;
RLMSP:MO=RXOTG,SUBORD;

GET BA LIST FOR CELL


GIVES FAULT CODES IF ANY
FOR 2000 SITES ONLY

RXBLI:MO=RXOTG-123;
RXBLI:MO=RXOTG-123,FORCE;
RXBLI:MO=RXOTF-123;
RXBLI:MO=RXOTRX-123-0;
RXBLI:MO=RXOTX-123-0;
RXBLI:MO=RXORX-123-0;
RXBLI:MO=RXOTS-123-0-0&&-7;
RXBLI:MO=RXOTRX-123-123,SUBORD;

BLOCKS MANAGE OBJECT


FORCES COMMAND THROUGH

RXBLE:MO=RXOTG-123;
RXBLE:MO=RXOTG-123,FORCE;
RXBLE:MO=RXOTF-123;
RXBLE:MO=RXOTRX-123-0;
RXBLE:MO=RXOTX-123-0;
RXBLE:MO=RXORX-123-0;
RXBLE:MO=RXOTS-123-0-0&&-7;
RXBLE:MO=RXOTRX-123-123,SUBORD;
RXMFP:MO=RXOTG-123,FAULTY,SUBORD;

UNBLOCKS MANAGE OBJECT


FORCES COMMAND THROUGH

RE-BLOCK

ALL ACTIVE FAULTS IN THE TG

RXTEI:MO=RXO-123;
RXESE:MO=RXO-123;
RXESI:MO=RXO-123;
RXPLI:MO=RXO,UC;

TESTS MO
REMOVES DATA FROM MO ONCE BLOCKED
RELOADS DATA INTO MO
FORCES DATA INTO MO AFTER BEING BLCOKED

RXMFP:MO=RXOTG-123-0-0;
RXCDP:MO=RXOTG-123;
RXMOP:MO=RXOTRX-123-0;
RLCHC:CELL=12345,HOP=OFF/ON;
RXLTI:MO=RXOTS-123-0-088-7;
RLSTC:CELL=G12345.STATE=HALTED;
RLSTC:CELL=G12345.STATE=ACTIVE;
RLDEP:CELL=G12345;
RXELP:MO=TXO;
AXE/H=(BXKAN)/PORT
ALLIP:ALCAT=EXT;

DISPLAYS FAULT CODES ON MO


PRINTS FAULT CODES ON MO (ON SCREEN)
GIVES SOFTWARE AND RBLT DEVICES
HOPPING OFF AND ON ON TIMESLOTS
LOOP TEST TIME SLOTS
HALTS ACTIVE SITE
ACTIVATES HALTED SITE
CELL ID NUMBERS
INTERMITTENT FAULT INC CF/TX/RX/TRX
LOGS ONTO SWITCH WHEN AUTO FAILS
ALARM PRINT LIST

D
31

10712

FDDARFCN SCRCODE MRSL


142
49

Lower limit in MS desired for signal strength(MSRXMIN) default 102Lower limit in BTS desired for signal strengt

MO
MO
MO
MO

CTR
CTR
CTR
CTR
CTR
CTR
CTR
DOS

check if TRX halted/blocked etc

u may have to halt and activate the cell for it to come back up

MO
MO
MO
MO

CTR
CTR
CTR
CTR
CTR
CTR
CTR
DOS

SION LEVELS - STATUS


HOPING STATUS

ONCE BLOCKED

ER BEING BLCOKED

O (ON SCREEN)

F/TX/RX/TRX
AUTO FAILS

BTS desired for signal strength (BSRXMIN) default 110

Special Event 2G parameters


ncells
set to max sdcch
dcells
fpdch=0
dcells
cro=60
dccels
pt=31
dcells
dha =on
(MSRXMIN)Lower limit in MS desired for signal strength
(BSRXMIN)Lower limit in BTS desired for signal strength

You might also like