METHODS OF
CONTROLLABLE VAR
GENERATION
BY
k v v satyanarayana
capacitors
generate and reactors
(inductors) absorb reactive power when
connected to an ac power source.
Variable lmpedance Type Static
Var
Generators
The Thyristor-Contolled and ThyristorSwitched Reactor (TCR and TSR).
The Thyristor-Switched Capacitor (TSC)
Fixed Capacitor, Thyristor-Controlled
Reactor Type Var Ganeraton
Thyristor-Switched Capacitor, ThyristorControlled Reactor Type Var Generator
The Thyristor-Contolled and
Thyristor-Switched Reactor
(TCR and TSR).
The
current in the reactor can be controlled from
maximum (thyristor valve closed) to zero
(thyristor valve open) by the method of firing
delay angle control.
the current in the reactor can be expressed with
u(t) : V coswt as follows:
The Thyristor-Switched Capacitor (TSC)
Reactor
is needed primarily to limit the surge
current in the thyristor valve under abnormal
operating conditions (e.g., control malfunction
causing capacitor switching at a "wrong time,"
when transient free switching conditions are not
satisfied)
it may also be used to avoid resonances with the
ac system impedance at particular frequencies
he current in the branch is given by
Fixed Capacitor, Thyristor-Controlled Reactor Type
Var Ganeraton
The
fixed capacitor, thyristor-controlled reactor type var
generator may be considered essentially to consist of a
variable reactor (controlled by delay angle a) and a fixed
capacitor, with an overall var demand versus var output
characteristic
The control of the thyristor-controlled reactor in the FC-TCR
type var generator needs to provide four basic functions,
One function is synchronous timing.
The second function is the reactiue current (or admittance)
to firing angle conuersion.
The third function is the computation of the required
fundamental reactor current Ipp
The fourth function is the thyristor firing pulse generation.
Thyristor-Switched Capacitor,
Thyristor-Controlled Reactor
Type Var Generator
Tsc tcr type compensator was developed primarily for
dynamic compensation of power transmission systems
with the intention of minimizing standby losses and
providing increased operating flexibility.
The operation of the basic TSC-TCR var generator shown
in Figure 5.22(a) can be described as follows: