Scribd
Upload
26 views

GSM RF Optimization

The document outlines the steps for GSM RF optimization including problem analysis by examining performance reports, coverage predictions, and customer complaints. Checks are then made which involve investigating network clusters, customer usage, and trouble ticket history. Finally, drive testing is conducted by defining test routes, collecting log files, and re-checking any questionable data.

Uploaded by

Agus Andriyas
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
26 views

GSM RF Optimization

The document outlines the steps for GSM RF optimization including problem analysis by examining performance reports, coverage predictions, and customer complaints. Checks are then made which involve investigating network clusters, customer usage, and trouble ticket history. Finally, drive testing is conducted by defining test routes, collecting log files, and re-checking any questionable data.

Uploaded by

Agus Andriyas
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Here I write about GSM RF Optimization Step by Step and how to find KPI degradation and its

solution.
The RF network optimization process can be categorized by the following steps:
Problem analysis

Analyzing performance retrieved from tool reports and statistics for the worst performing BSCs and/or Sites

Viewing ARQ reports for BSC/Site performance trends

Examining planning tool coverage predictions

Analyzing previous drive test data

Discussions with local engineers to prioritize problems

Checking customer complaints reported to local engineer

Checks prior to action

Cluster definitions by investigating BSC borders, main cities, freeways, major roads

Investigating customer distribution, customer habits (voice/data usage)

Running specific traces on network to categorize problems

Checking trouble ticket history for previous problems

Checking any fault reports to limit possible hardware problems prior to test

Drive testing

Discussion of drive test goals and objectives

Defining drive test routes

Collecting log files

Scanning frequency spectrum for possible interference sources

Redriving questionable data

You might also like