0% found this document useful (0 votes)
175 views

Alarm 2G

This document provides information about Huawei's alarm solution for indoor and outdoor sites, including the EMU alarm controller box and external alarm port assignments. For indoor sites, the EMU will be installed and used to monitor environmental sensors like smoke, temperature, and water sensors via inputs. It can monitor 32 alarms and communicate with the BTS via RS485 but cannot output alarms. For outdoor sites, the BBU3900 will monitor external alarms through an external alarm surge protection board called USLP2.

Uploaded by

pr3m4n
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
175 views

Alarm 2G

This document provides information about Huawei's alarm solution for indoor and outdoor sites, including the EMU alarm controller box and external alarm port assignments. For indoor sites, the EMU will be installed and used to monitor environmental sensors like smoke, temperature, and water sensors via inputs. It can monitor 32 alarms and communicate with the BTS via RS485 but cannot output alarms. For outdoor sites, the BBU3900 will monitor external alarms through an external alarm surge protection board called USLP2.

Uploaded by

pr3m4n
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 22

Security Level:

Nov 2009

Alarm Solution for NEW Site


BTS3900/BTS3900A
HCPT Project
Issue 1.0

HUAWEI TECHNOLOGIES CO., LTD.

www.huawei.com

Huawei Confidential

Indoor/BTS3900 External Alarm Port Assignment


Outdoor/BTS3900A External Alarm Port Assignment

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 2

Indoor Site Alarm Solution


For TK new site indoor, Huawei will use the EMU with sensors
to monitor the environment alarm.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 3

EMU Alarm System Indoor

The EMU will be

Smoke sensor

installed on wall

The sensors will be


distributed on
various areas

The BTS/NodeB
can be
communicate with
EMU using the

Door sensor

Temperature
sensor

EMUalarm controller box

RS485 protocol
BTS/NodeB

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 4

Water sensor

Alarm BOXEMU

EMU must be installed


on the wall according
the engineering design.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 5

EMU Interface

EMU can monitor


32 external dry
contact alarms

EMU can not


output dry
contact alarm to
connect with
DDF

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 6

Dip-Switch Setting on EMU board


Board layout
inside the EMU

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 7

Dip-Switch Setting on EMU board

Functions and Settings of the DIP switches on the panel of the EMU

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 8

Dip-Switch Setting on EMU board

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 9

On Site EMU Alarm Box Connection


Alarm Sensors
DB9
RJ45

RJ45

FAN

EMU BOX

SENSOR COM-OUT COM-IN


BTS3900 FAN

RJ45
UPEU
ETX-ALM1 ETX-ALM0 MON 1 MON 0

If connect to MON 0 on UPEU, at BSC need


to configure DEMU on slot No. 0

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 10

How to Make EMU Monitoring Cable

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 11

Alarm Sensors Connection

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 12

Alarm Sensors Specification


Sensor-water
The water sensor only outputs
the current signal

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 13

Alarm Sensors Specification


Sensor-smoke
The smoke sensor can output
the dry contact alarm

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 14

Alarm Sensors Specification


Sensor-door
Door sensor can output the
dry contact alarm

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 15

Alarm Sensors Specification


Sensor-temperature
The temperature sensor only
outputs the current signal

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 16

Rectifier Alarm Connection

Rectifier Alarm need to connect through:


32 Ports for Boolean Signal Sensors No. 12

S16- S16+

S1- S1+

S32- S32+

S17- S17+

Alarm Rectifier need follow according to designed


HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 17

Indoor/BTS3900 External Alarm Port Assignment


Outdoor/BTS3900A External Alarm Port Assignment

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 18

Outdoor Site Alarm Solution


For TK new site outdoor, the BBU3900 without sensor will
monitor the external alarms.
The BBU3900, which is main controller module for
BTS/NodeB, will be installed in BTS3900A cabin.
Huawei will supply the external alarm signal surge
protection board, named USLP2, to protect the BBU3900.

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 19

Alarm Surge Protection BoardUSLP2


Parameter

Specification

Function

External alarm surge


protection

In 0/1/2/3

Input

Out 0/1

Output

USLP
2

OUT0 Port on USLP2

IN2 and IN3 Port on USLP2

EXT-ALM0 Port on UPEU

Pin Assignment of the USLP2 Connectors

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 20

Outdoor External Alarm Monitor Solution


HEUA-BBU monitor cable

BBU3900 monitor external


alarm through the surge

COM
IN(HEUA)
MON1

protection board

BBU-FMUA monitor
cable

COM
IN(FMUA)

External
alarm input

HUAWEI TECHNOLOGIES CO., LTD.

Huawei Confidential

Page 21

MON0

Thank you
www.huawei.com

You might also like