Scribd
Upload
570 views9 pages

R8 Coupe + Spyder - Replacement Spoiler Install Guide

This document provides installation instructions for replacing the spoiler on an Audi R8 Coupe/Spyder. The instructions include 7 steps: 1) check kit contents, 2) extend the original spoiler, 3) remove the original spoiler, 4) remove brackets from the original spoiler, 5) transfer the brackets to the replacement spoiler, 6) reinstall the replacement spoiler, and 7) retract the replacement spoiler. The kit contains a carbon fiber replacement spoiler and instructions detail how to remove parts from the original spoiler and install them on the new replacement spoiler.

Uploaded by

ohshafi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
570 views9 pages

R8 Coupe + Spyder - Replacement Spoiler Install Guide

This document provides installation instructions for replacing the spoiler on an Audi R8 Coupe/Spyder. The instructions include 7 steps: 1) check kit contents, 2) extend the original spoiler, 3) remove the original spoiler, 4) remove brackets from the original spoiler, 5) transfer the brackets to the replacement spoiler, 6) reinstall the replacement spoiler, and 7) retract the replacement spoiler. The kit contains a carbon fiber replacement spoiler and instructions detail how to remove parts from the original spoiler and install them on the new replacement spoiler.

Uploaded by

ohshafi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Audi R8 Coupe/Spyder Replacement Spoiler

Replacement Spoiler

Installation overview
1.
2.
3.
4.
5.
6.
7.

Check contents of kit


Extend Rear Spoiler to the UP Position
Remove OEM Spoiler
Remove Support Brackets from OEM Spoiler
Transfer Support Brackets to Re-install Replacement Spoiler
Re-install Replacement Spoiler
Retract Rear Spoiler to the DOWN Position

Replacement Spoiler

1. Check Contents of Kit

Contents
A. 1x Replacement spoiler (carbon fibre)

Replacement Spoiler

2. Extend Rear Spoiler to the UP Position


Extend spoiler to the UP position
by pressing briefly on the
button

Replacement Spoiler

3. Remove OEM Spoiler


Remove Existing Spoiler (2)
from the Drive Unit (1)
Remove nuts

Tools required:
10mm socket wrench
Lift off spoiler after removing
nuts

Replacement Spoiler

4. Remove Support Brackets from OEM Spoiler


a) Lift off spoiler and flip over
b) Do not throw away plastic
shims
c) Remove support brackets

Tools required:
T25 Torx

Replacement Spoiler

5. Transfer Support Brackets to Replacement Spoiler


a) Flip over Replacement
Spoiler
b) Re-install support brackets
removed in Step 4
Tools required:
T25 Torx

Replacement Spoiler

6. Re-Install Spoiler (Using Process in Reverse)


Remove Existing Spoiler (2)
from the Drive Unit (1)
Remove nuts

Tools required:
10mm socket wrench
Lift off spoiler after removing
nuts

Replacement Spoiler

7. Retract Rear Spoiler to the DOWN Position


Retract spoiler to the DOWN
position by pressing briefly on
the

**If the spoiler does not retract using the switch do not worry. Drive the car for a couple of hundred yards/metres
and it will retract automatically.

You might also like