Scribd
Upload
83 views

Quality Assurance Protocol-1

This document outlines Intertech Equiptechnologies' quality assurance protocol for fabricating tanks and portable equipment. It details the documentation that will be provided, including design specifications, equipment data sheets, process diagrams, and details of any departures from design. Records will be maintained to verify adherence to quality procedures and standards. A quality assurance representative will be nominated to ensure quality requirements are met. Inspection and test plans will be prepared and approved by the client prior to manufacture.

Uploaded by

renjithv_4
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
83 views

Quality Assurance Protocol-1

This document outlines Intertech Equiptechnologies' quality assurance protocol for fabricating tanks and portable equipment. It details the documentation that will be provided, including design specifications, equipment data sheets, process diagrams, and details of any departures from design. Records will be maintained to verify adherence to quality procedures and standards. A quality assurance representative will be nominated to ensure quality requirements are met. Inspection and test plans will be prepared and approved by the client prior to manufacture.

Uploaded by

renjithv_4
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

QUALITY ASSURANCE PROTOCOL

PREFACE
This Standard details the level of documentation that INTERTECH EQUIPTECHNOLOGIES PVT.LTD (IET) will
provide during a contract for fabricating tank(s) or portable equipments. Extensive documentation is required for this
system to assist in the validation of critical services to comply with FDA / EU regulatory authorities. This documentation
will be compiled in the form of a Quality Assurance manual, the format of which is outlined in this specification. It will
contain all necessary information regarding design, construction, installation and validation undertaken by IET.

INTRODUCTION
Document and file:
Brief scope of work / Project Description
Equipment schedule (including make, model, size, serial numbers)
Tank & Equipments i.e. Reactor et . data sheets / specification
Process & Instrumentation Diagram (If applicable)
Details of any departures from the design specifications at installation including materials of construction
and key equipment.
Warranty on parts and workmanship

QUALITY SYSTEM
The design and fabrication of portable and fixed hygienic tanks will comply with the following standards and
specifications:
Design Specification
Good Engineering Standards
Quality Records
The direct contractor shall operate to a quality system for all works in this contract, inc. Materials and
workmanship. The quality system will comply with cGMP norms or equivalent.
Full details of the Quality System will be submitted to client prior to the commencement of
manufacture. A final and signed copy will be included with the final documentation submission.
Throughout the project, IET will maintain records to verify that quality procedures and standards have
been adhered to. Variations or modifications must be documented and approved by client prior to
implementation.
Quality Assurance Representative
After the contract is let and a minimum of 14 days before the work is to commence, IET shall nominate
the person responsible for insuring that the quality assurance requirements are implemented and
maintained.
Inspection & Test Plans
Full details of the quality system, including inspection and test plans will be submitted to client for
approval prior to the commencement of manufacture. Inspection, test and hold points shall be prepared
and presented to client for approval prior to commencement of manufacture. A copy of this will be
provided in the QA manual

You might also like