Scribd
Upload
21 views

Short Reinforcement Long Reinforcement: +ive in Span Due To

This document summarizes the design of a two-way slab with a thickness of 165 mm and one short edge that is continuous. The short reinforcement consists of 10 mm diameter bars at 90 mm spacing on the bottom face. The long reinforcement consists of 10 mm diameter bars at 150 mm spacing on the bottom face and 10 mm diameter bars at 135 mm spacing on the top face at the continuous edge. The design was checked for deflection according to Indian standards and found to be unsafe.

Uploaded by

Anonymous YDwBCts
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
21 views

Short Reinforcement Long Reinforcement: +ive in Span Due To

This document summarizes the design of a two-way slab with a thickness of 165 mm and one short edge that is continuous. The short reinforcement consists of 10 mm diameter bars at 90 mm spacing on the bottom face. The long reinforcement consists of 10 mm diameter bars at 150 mm spacing on the bottom face and 10 mm diameter bars at 135 mm spacing on the top face at the continuous edge. The design was checked for deflection according to Indian standards and found to be unsafe.

Uploaded by

Anonymous YDwBCts
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Design of Two-Way Slabs

Slab Mark

Short Span (lx)

6 20 m
6.20

Long Span (ly)

9.40 m

Concrete Grade
Reinf Grade

=
=

20 N/mm
2
415 N/mm

Type of Panel

8.25 Kn/m

ly/lx

Thickness (D)

165 mm

1.52

Eff Cover

20 mm

Eff Depth (d)


Load Factor

=
=

145 mm
1.5

One Short Edge Continuous

Short Reinforcement
+ive in span due to Continuous Edges Case
+ive Mom Coeff (x)

(xwlx2)

24.42 Kn-m

Mux

kx

36.63 Kn-m
2
1.74 N/mm
Area (cm2)
7.89

Required Short +ive Reinforcement


Tension Rft. (pt)
=
0.544 %

Long Reinforcement
+ive in span due to Continuous Edges Case

0.077

B.M (Mx)

Compression Rft. (pc)

0.000 %

Provided +ive Reinforcement


Short Tension reinf dia
=

10 mm

Spacing

90 mm

Short Comp reinf dia


Spacing

=
=

0.00
pvdd area
8.72
(Safe)

N/A
N/A

0.00

+ive Mom Coeff (y)

0.043

B.M (My)

13.64 Kn-m

Muy

ky

20.45 Kn-m
2
1.04 N/mm

Compression Rft. (pc)

=
=

0.00 Kn-m

Mux

0 00 Kn-m
0.00
Kn m

kx

(xwlx2)
2

0.00 N/mm

Required Short -ive Reinforcement


Tension Rft. (pt)
=
0.000 %
Compression Rft. (pc)

0.000 %

Required -ive Reinf.

10

0.000 %

Spacing

Long Comp reinf dia


Spacing

=
=

10 mm
150 mm

N/A
N/A

Service Stress (fs)


Actual Lx/d (ra)

42.76

5.23
(Safe)

0.00

Area (cm2)
0.00
0.00

-ive Mom Coeff (y)

0.057

B.M (My)

18.08 Kn-m

Muy

27 11 Kn-m
27.11
Kn m

ky

Area (cm2)
5.63

Required Long -ive Reinforcement


Tension Rft. (pt)
=
0.389 %
Compression Rft. (pc)

Required -ive Reinf.

Modified Permissible Lx/d (rpm)

(ywlx2)

2
1.29 N/mm

0.000 %

0.00

10 @ 135 mm c/c [T]

Check for Deflection as per IS456-2000, Clause : 23.2.1- C & D & Figures: 4 & 5
=
20.00
Tension Modification Factor (Mft) =
2
N/mm
= 217.641
Comp Modification Factor (Mfc) =

Permissible Lx/d (rp)

0.00
pvdd area

-ive at Continuous edge

0.000

B.M (Mx)

Provided +ive Reinforcement


Long Tension reinf dia
=

(ywlx2)

Area (cm2)
4.48

Required Long +ive Reinforcement


Tension Rft. (pt)
=
0.309 %

-ive at Continuous edge


-ive Mom Coeff (x)

Max UDL (w)

1.27

(pt = 0.6%)

1.00

(pc = 0%)

25.39 (rp X Mft X Mfc)

Since Actual L/d is More Than Permissible Modified L/d


Slab is Unsafe in Deflection

@ Span

Summary For (165 Thk) Two Way Slab With One Short Edge Continuous
Short Reinforcememt
Long Reinforcement
= 10 Tor @90 c/c [Bottom]
@ Span
= 10 Tor @ 150 c/c [Bottom]

@ Continuous Edge

N/A

@ Continuous Edge

10 Tor @ 135 mm c/c [Top]

You might also like