Scribd
Upload
37 views

Tagore Engineering College Dept of Electronics and Communication Ec2304 Microprocessors and Microcontrollers Unit Test-Iii

This document contains a unit test for a microprocessors and microcontrollers course given on October 10, 2014 at Tagore Engineering College. The 50-minute, 50-point test has two parts: Part A contains 5 short answer questions worth 2 points each about I2C, power down mode of the 8051 microcontroller, sample-and-hold circuits, comparing A/D and D/A converters, and the use of USART. Part B contains two longer answer questions worth 40 points total about the architecture of the PPI and its operating modes, and the block diagram and operation of programmable interval timers.

Uploaded by

premaprabu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
37 views

Tagore Engineering College Dept of Electronics and Communication Ec2304 Microprocessors and Microcontrollers Unit Test-Iii

This document contains a unit test for a microprocessors and microcontrollers course given on October 10, 2014 at Tagore Engineering College. The 50-minute, 50-point test has two parts: Part A contains 5 short answer questions worth 2 points each about I2C, power down mode of the 8051 microcontroller, sample-and-hold circuits, comparing A/D and D/A converters, and the use of USART. Part B contains two longer answer questions worth 40 points total about the architecture of the PPI and its operating modes, and the block diagram and operation of programmable interval timers.

Uploaded by

premaprabu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

TAGORE ENGINEERING COLLEGE

DEPT OF ELECTRONICS AND COMMUNICATION


EC2304 MICROPROCESSORS AND MICROCONTROLLERS
UNIT TEST-III
Date: 10.10.2014
SEM: V

Max.Marks:50
Duration: 90 MIN
ANSWER ALL QUESTIONS
PART-A (2*5=10)

1.

What is I2C?

2.

What happens in power down mode of 8051 c?

3.

What you mean by sample-and-hold circuit?

4.

Compare the feature of A/D convertor and D/A convertor

5.

What is the use of USART?

PART-C (40)
6. Write neat sketch explain the architecture of PPI and its operating modes
7. Draw and explain the block diagram of programmable interval timers
8. Explain in the detail the process involved in the design of traffic light controller with example.
9. (i) Explain with neat sketch how microcontroller interface with RTC using I2c
(ii) Explain the detail of P WM and neat sketch of interfacing diagram using 8051

You might also like