Scribd
Upload
133 views2 pages

A22E-EG2 Shroud Flyer

This document provides information on emergency stop switches and accessories that enable conformance with industry safety standards. It describes a flush-mount emergency stop shroud that provides a neat appearance while minimizing accidental activation. The shroud comes in models that can accommodate zero, one, or two spacers to adjust protrusion depth. Details are provided on part numbers, dimensions, installation, and general precautions for using the switches and ensuring safety.

Uploaded by

TanCheeSiong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
133 views2 pages

A22E-EG2 Shroud Flyer

This document provides information on emergency stop switches and accessories that enable conformance with industry safety standards. It describes a flush-mount emergency stop shroud that provides a neat appearance while minimizing accidental activation. The shroud comes in models that can accommodate zero, one, or two spacers to adjust protrusion depth. Details are provided on part numbers, dimensions, installation, and general precautions for using the switches and ensuring safety.

Uploaded by

TanCheeSiong
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Emergency Stop Switches

A22E Series and Accessories

Enables Conformance to SEMI S2-0200 and


SEMATECH Application Guide for S2-93

Flush-mount E-stop Shroud


A22Z-EG2 Series

Recessed design provides


neat appearance.
Minimizes accidental activation, preventing operating errors.
Does not obstruct down flow of air.
Spacers can be used to
Without
With one
With two
adjust amount of protrusion.
Spacer
Spacer
Spacers

Mounting nut
(black)

Spacer
(yellow)

Switch guard
(yellow)

SEMI S2-0200
12.4 All emergency off buttons should be clearly labeled as "EMO," "Emergency Off,"
or the equivalent and should be clearly legible from the viewing location. The label may
appear on the button or on the yellow background.
SEMATECH Application Guide for SEMI S2-93
12.4.c The EMO should be located in an area not subject to accidental activation. If a
button guard is installed, its diameter should be no less than 75 mm (3 inches) with the
button recessed no more than 3 mm (0.125 inches) from the front of the guard, or
equivalently configured to allow for palm activation.
Note: The EMERGENCY OFF legend plate is not provided in a set. Prepare separately or purchase the A22Z-3466-2.

The Switch is not included with this product.

Details

Model

Spacer not included


Spacer included (one)
Spacers included (two)
EMERGENCY OFF legend plate

A22Z-EG2
A22Z-EG21
A22Z-EG22
A22Z-3466-2

For details on Emergency Stop Switches, refer to the Safety Component Series Catalog (Y106)
and Pushbutton Switches Catalog (X032).

This product can be used when configuring a safety system complying with SEMI S2-0200 and SEMATECH Application Guide for SEMI S2-93.
This product conforms to these standards provided that it is used in combination with an OMRON A22E-series Emergency Stop Switch.

Dimensions (Unit: mm)


A22Z-EG2
A22Z-EG21
A22Z-EG22

105 dia.
98 dia.

35
12

79 dia.

2.8
20.6

M90

Internal raised
section stops rotation (two: one
on each side)

22.2 dia.

R2

Using One Spacer


Spacer

Using Two Spacers

Number of Spacers that can be used


depends on the
E-stop Shroud model. (See note 1.)

Using Single-pole Switch Unit


(See note 4.)

Spacer
Raised
section
SPST-NC unit stopping
rotation

Panel Cutout Dimensions


90.3

+0.4
0

dia.

5.5

10
13

Using Double-pole Switch Unit


(See note 4.)

Panel

20
23

95

Raised section stopping


rotation

+0.2
0

+0.2
0

Panel

Panel

Panel
88 max.

105 max.

Note 1: The number of Spacers that can be used depends on the E-stop Shroud
model, as follows:

Introducing New E-stop Shroud Set

Model
A22Z-EG2
A22Z-EG21
A22Z-EG22

The SEMI S2-compliant E-stop Shroud Set


includes a SEMI S2-compliant E-stop Shroud
and EMERGENCY OFF legend plate.

A22Z-EG1
For details, refer to the A22E Series and Accessories
Brochure (A160-E1-01).

DPST-NC unit

The E-stop Shroud Set does


not include the Switch.

Number of Spacers
0
1
2

Note 2: Tighten to a torque of 1.96 to 2.94 Nm.


Note 3: The allowable panel thickness is as follows:
Without Spacers: t = 1.3 to 22.5 mm
Using one Spacer: t = 1.3 to 12.5 mm
Using two Spacers: t = 1.3 to 2.5 mm
Note 4: The dimensions are taken from the front of the panel when a Switch is
installed.

General Precautions
The application examples in this brochure are provided for reference purposes only. Always check the functions and safety of devices and
equipment before using them with this product.
Before using the product under conditions which are not described in the brochure or applying the product to nuclear control systems,
railroad systems, aviation systems, vehicles, combustion systems, medical equipment, amusement machines, safety equipment, and other
systems, machines, and equipment that may have a serious influence on lives and property if used improperly, consult your OMRON
representative.
Make sure that the ratings and performance characteristics of the product are sufficient for the systems, machines, and equipment, and be
sure to provide the systems, machines, and equipment with double safety mechanisms.

Authorized Distributor:

Cat. No. A159-E1-01

Note: Specifications subject to change without notice.

You might also like