Scribd
Upload
708 views1 page

Marposs T18 For HAAS Lathe

The T18 is a compact touch probe that can be configured for use on lathes and machining centers for tool checking applications like tool breakage detection, tool offset determination, tool pre-setting, and tool wear compensation. It has a unidirectional repeatability of 1 μm at speeds up to 600 mm/min and radial and axial trigger forces of 1.5 N and 1 N respectively.

Uploaded by

alejandro777_e
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
708 views1 page

Marposs T18 For HAAS Lathe

The T18 is a compact touch probe that can be configured for use on lathes and machining centers for tool checking applications like tool breakage detection, tool offset determination, tool pre-setting, and tool wear compensation. It has a unidirectional repeatability of 1 μm at speeds up to 600 mm/min and radial and axial trigger forces of 1.5 N and 1 N respectively.

Uploaded by

alejandro777_e
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

T18

Lathes

+10

The T18 is a compact touch probe for tool checking


applications. Due to the versatility of the T18 it can be
configured for use on lathes and machining centers, for
tool breakage detection, tool offset determination, tool
pre-setting and tool wear compensation.

25,5

64,5

23,5

29,5

19

-10

17,5

TOOL
SETTING

Technical specifications
Lathe

M/C version
Cable

DATA TRANSMISSION

X, Z

Probe axes with straight stylus


Unidirectional repeatability (2)

1 m

at speed up to 600 mm/min

1,5 N

Radial trigger force

1N

Axial trigger force


Overtravel on axis

X = 5,5 mm

X/Y = 5,5 mm

Z = 5,5 mm

Z = 5,2 mm

Cable lenght

8m

Coupled with

E32R

Above characteristics refer to a 20 mm straight stylus

38

You might also like