Scribd
Upload
36 views

+ 2x + 10, Where X Is 3 Bit Input.: Load. 14, 15) Using K-Map. Convert The Circuit in NAND-NAND From

This document contains instructions for a timed exam consisting of multiple choice and circuit design questions related to digital logic and sequential circuits. Students are given 2 hours to complete any 7 of 14 multiple choice questions worth 2 marks each, any 3 of 6 circuit design questions worth 6 marks each, and any 2 of 4 additional circuit design or explanation questions worth 9 marks each. The exam covers topics such as encoders, decoders, flip-flops, sequential circuits, adders, latches, registers, counters, universal gates, truth tables, race conditions, pulse triggering, setup and hold times, and shift registers.

Uploaded by

rudra_mazumdar
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
36 views

+ 2x + 10, Where X Is 3 Bit Input.: Load. 14, 15) Using K-Map. Convert The Circuit in NAND-NAND From

This document contains instructions for a timed exam consisting of multiple choice and circuit design questions related to digital logic and sequential circuits. Students are given 2 hours to complete any 7 of 14 multiple choice questions worth 2 marks each, any 3 of 6 circuit design questions worth 6 marks each, and any 2 of 4 additional circuit design or explanation questions worth 9 marks each. The exam covers topics such as encoders, decoders, flip-flops, sequential circuits, adders, latches, registers, counters, universal gates, truth tables, race conditions, pulse triggering, setup and hold times, and shift registers.

Uploaded by

rudra_mazumdar
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

FM: 50

Time 2hr

Do any seven
7 X 2 = 14
1. What is the difference between encoder and decoder?
2. Implement NOR gate using inhibit gate.
3. Convert one JK flip-flop to D flip-flop.
4. What is sequential circuit?
5. How many states are present in a sequential circuit having 5 flip-flops?
6. What is full adder?
7. What is the latch?
8. What is the difference between register and counter?
9. What is universal gates and why it is called so?
10. What is the difference between truth table and excitation table?
11. What is race condition in JK flip flop?
12. What do you mean by pulse triggered?
13. What is setup time and hold time?
Do any three
3 X 6 = 18
14. Design a 3 bit shift register using SR flip-flop.
15. Implement the function (2, 3, 12, 13, 14, 15) using multiplexer.
16. Design a sequential circuit whose transition function is shown below
state
00
01
10
11

Inputs
0
1
00 11
10 01
01 10
11 00

Output
1
1
0
1

17. Design an excess-3 to BCD code converter circuit.


18. Design an 8 X 3 encoder circuit.
19. Design a digital circuit using OR-AND logic which will evaluate the 3x2
+ 2x + 10, where x is 3 bit input.
20. What is shift register? Design a bidirectional shift register with parallel
load.
21. Draw the logic circuit to simplified form of the function (3, 7, 11, 13,
14, 15) using K-Map. Convert the circuit in NAND-NAND from.
Do any two
22. Design a 4 bit comparator.
23. Design a decade counter
24. What is PLA? Explain with an example.
25. Design a Priority encoder
26. What is ripple counter? Explain.

2 X 9 = 18

You might also like