Scribd
Upload
62 views

Analogue Panel Meter

This document provides the specifications for digital panel meters that can measure various electrical parameters including voltage, current, power, power factor, frequency, and energy. The meters offer features like true RMS measurement, auto-scaling, on-site configuration of CT/VT ratios, and programming via push buttons. They have measurement ranges configurable from secondary to primary levels for different parameters. The meters have an IP50 enclosure, operate from 80-300V AC or 24V DC, and are type tested per the relevant standard.

Uploaded by

Shuhan Mohammad Ariful Hoque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
62 views

Analogue Panel Meter

This document provides the specifications for digital panel meters that can measure various electrical parameters including voltage, current, power, power factor, frequency, and energy. The meters offer features like true RMS measurement, auto-scaling, on-site configuration of CT/VT ratios, and programming via push buttons. They have measurement ranges configurable from secondary to primary levels for different parameters. The meters have an IP50 enclosure, operate from 80-300V AC or 24V DC, and are type tested per the relevant standard.

Uploaded by

Shuhan Mohammad Ariful Hoque
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

SPECIFICATION FOR DIGITAL PANEL METERS (1ph / 3ph)

(Ammeter / Voltmeter / PF Meter / Active Power Meter / Reactive


Power Meter / Energy Meter / Frequency Meter / DC Ammeter / DC
Voltmeter)
1. Features:
True root mean square (RMS) measurement
7-segment LED display (6 digits for energy meter, others 4 digits)
Auto-scaling for voltage, current, power and energy
On-site CT/VT commissioning
On-site set up for wiring configuration (3ph 3w or 3ph 4w)
Fully digital, for high accuracy and repeatability
Wide measurement range
In-field programming via push-buttons : Wiring configuration and CT/VT
primary/secondary
2. Electrical:
Auxiliary supply 80-300 V AC, 24V DC
Burden Auxiliary supply: < 3 VA
Measuring terminal: < 0.5 VA
Accuracy class 0.5 or 1.0
Overload capacity: Voltage 120% Vnom, Current 120% Inom
3. Measuring Range:
Voltmeter (single/three phase) : Secondary 0-415V, Primary configurable
through push-button up to kV range
Ammeter (single/three phase) : Secondary: 0-5A, Primary: configurable
through push-button up to kA range
Frequency meter 45-65 Hz
Power meter (1P/3P Active and 3P Reactive) 0-415V, 0-5A
Power factor Meter 0.5 lag-1.0-0.5 lead (for nominal voltage and currents)
Energy meter 0-415V, 0-5A
DC voltmeter 0-20 V, 0-300 V
DC ammeter 75 mV external shunt operated meters
4. Mechanical:
Bezel size 96 x 96 mm
Panel cut out 92 x 92 mm
Enclosure : Polycarbonate
Terminals : Tag screw
Weight 0.3 kg (approx.)
Flame retardation UL 94 VO
5. Environmental:
Protection class IP 50 as per IEC 60529, IP 20 as per IEC 60259 (terminals)
EFT Level: 2 kV Freq: 5 kHz EFT
ESD Contact and air discharge: 8 kV
Temperature -10 C to +50 C (operating), -25 C to +70 C (storage)
Humidity 95% non-condensing

6. Type Test: Fully type tested as per IS 13875

You might also like