Scribd
Upload
77 views1 page

Bkag Xdrcu-Alt 220l127 l245l KV en

This document provides information on the Laminated Sheath XDRCU-ALT single-core cable for 220/127 (245) kV applications. The cable construction includes a copper conductor, XLPE insulation, a copper wire screen, and an aluminum laminated sheath for protection. Key features are its low weight, low losses, and internationally proven design for various applications. Technical specifications and standards compliance are also listed.

Uploaded by

arisan47
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
77 views1 page

Bkag Xdrcu-Alt 220l127 l245l KV en

This document provides information on the Laminated Sheath XDRCU-ALT single-core cable for 220/127 (245) kV applications. The cable construction includes a copper conductor, XLPE insulation, a copper wire screen, and an aluminum laminated sheath for protection. Key features are its low weight, low losses, and internationally proven design for various applications. Technical specifications and standards compliance are also listed.

Uploaded by

arisan47
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Laminated Sheath XDRCU-ALT

XDRCU-ALT Single-core Cable for


220/127 (245) kV
with Copper wire screen and Aluminium laminated
sheath
Construction
*

*
*

Copper conductor, round stranded or segmented, optionally with longitudinal water


barrier
Inner semi-conductive layer firmly bonded to
the XLPE insulation
XLPE main insulation, cross-linked
Outer semi-conductive layer firmly bonded to
the XLPE insulation
Copper wire screen with semi-conductive
swelling tapes above and below as longitudinal water barrier
Aluminium foil, overlapped and glued as radial
diffusion barrier bonded to the oversheath
Thermoplastic oversheath as mechanical protection, optionally with semi-conductive
and/or flame-retardant layer

220/127 kV

Remarks
The inner semi-conductive layer, the XLPE main
insulation and the outer semi-conductive layer
are extruded in a single operation applying a dry
curing and a water or nitrogen cooling method.
Features
*
*
*
*
*

Low weight
Low losses
Low cost
Internationally proven design
Suitable for most applications

Standards
IEC 62067
ICEA S-108-720
AEIC CS9-06

Technical data
Conductor Outer diame- Cable weight AC resistance AC resistance
cross-section ter (approx.)
(approx.)

Reactance

Reactance

Capacitance Min. bending Max. pulling


radius
force

mm

mm

kg/m

m/km

m/km

m/km

m/km

F/km

mm

kN

400
500
630
800
1000
1200
1400
1600
2000
2500

96
97
97
101
104
108
111
115
119
126

12
13
14
16
18
20
22
25
29
34

61.6
48.9
39.0
31.9
27.0
20.4
17.8
16.0
13.4
11.5

60.2
47.0
36.5
28.8
23.2
20.1
17.4
15.5
12.8
10.8

148
141
132
126
120
115
111
110
107
104

234
227
218
209
201
194
188
185
180
173

0.124
0.136
0.156
0.173
0.193
0.220
0.239
0.249
0.263
0.287

2000
2000
2000
2100
2100
2200
2300
2300
2400
2600

24
30
38
48
60
72
84
96
120
150

Capacity

20130316-1

Subject to change without notice

Installation
Amb. temp.
Soil resist.
Load factor
Cross-section
mm

400
500
630
800
1000
1200
1400
1600
2000
2500

1.0

1.0

678
769
872
976
1072
1240
1333
1410
1540
1668

20 C
1.0 Km/W

35 C
in air

0.7

0.7

744
849
972
1098
1219
1397
1514
1610
1780
1954

802
915
1044
1176
1299
1510
1631
1729
1895
2064

862
989
1140
1296
1448
1670
1818
1937
2150
2374

818
942
1090
1245
1395
1647
1802
1924
2134
2365

899
1043
1221
1411
1602
1877
2072
2224
2497
2808

Calculation basis: Conductor temperature: 90C, Frequency: 50 Hz, Laying depth: 1200 mm, Phase distance at flat formation:
30 cm, Earthing method: Single-Point Bonding or Cross-bonding
Values apply for cables with rated voltages from 220 kV to 230 kV acc. to IEC 62067

HIGH VOLTAGE SYSTEMS


Phone +41 (0)56 460 3333

Fax +41 (0)56 460 3536

[email protected]

You might also like