Scribd
Upload
611 views

Wind Girder Table API 650

The document provides section moduli values for various stiffening ring sections used in tank shells, as specified in API standard 650. It includes a figure illustrating typical stiffening ring section details and two tables listing the section moduli for different ring sizes and shell thicknesses in metric units.

Uploaded by

jojo_323
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
611 views

Wind Girder Table API 650

The document provides section moduli values for various stiffening ring sections used in tank shells, as specified in API standard 650. It includes a figure illustrating typical stiffening ring section details and two tables listing the section moduli for different ring sizes and shell thicknesses in metric units.

Uploaded by

jojo_323
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

5-80

API STANDARD 650

25 mm (1 in.)

16t

16t

t
Detail b

Detail a

16t

Detail c
16t

16t

Detail d

16t

150 mm (6 in.)
16t
(1

6 mm /4 in.)

16t

Detail e
t

Figure 5.24Typical Stiffening-ring Sections for Tank Shells (see Table 5.20a and Table 5.20b)

Copyright American Petroleum Institute


Provided by IHS under license with API
No reproduction or networking permitted without license from IHS

Licensee=Techint S.A./5938621100, User=Vanoli, Ariel


Not for Resale, 05/03/2013 13:46:43 MDT

--```,,,``````,`,,,`,,,,,```,`,,-`-`,,`,,`,`,,`---

65 mm (21/2 in.)

WELDED TANKS FOR OIL STORAGE

5-81

Table 5.20aSection Moduli (cm3) of Stiffening-Ring Sections on Tank Shells (SI)


Dimensions in millimeters
Column 1
Member Size

Column 2

Column 3

Column 4

Column 5

Column 6

As-Built Shell Thickness


5

10

11

6.77
8.63
13.97

28.16
34.67
37.49
53.84
74.68
87.69

29.15
36.20
63.21
70.08
93.71
110.77
141.38
171.17

30.73
38.51
66.88
74.49
99.86
118.97
152.24
184.11

32.04
40.32
69.48
77.60
104.08
124.68
159.79
193.08

32.69
41.17
70.59
78.90
105.78
126.97
162.78
196.62

186.49
223.37
256.84
308.17
335.45
402.92
473.57

195.15
234.55
269.59
324.40
353.12
425.14
495.62

201.83
243.41
279.39
337.32
366.82
443.06
513.69

204.62
247.16
283.45
342.77
372.48
450.61
521.41

341
427
519
615
717
824
937
1054
1176
1304
1436
1573
1716
1864
2016
2174

375
473
577
687
802
923
1049
1181
1317
1459
1607
1759
1917
2080
2248
2421

392
496
606
723
846
976
1111
1252
1399
1551
1709
1873
2043
2218
2398
2584

399
505
618
737
864
996
1135
1280
1432
1589
1752
1921
2096
2276
2463
2654

Top Angle: Figure 5.24, Detail a


65 65 6
65 65 8
75 75 10

6.58
8.46
13.82

Curb Angle: Figure 5.24, Detail b


65 65 6
65 65 8
75 75 6
75 75 10
100 100 7
100 100 10

27.03
33.05
35.98
47.24
63.80
71.09

65 65 6
65 65 8
100 75 7
102 75 8
125 75 8
125 75 10
150 75 10
150 100 10

28.09
34.63
60.59
66.97
89.41
105.20
134.14
155.91

Two Angles: Figure 5.24, Detail d (See Note)


100 75 8
100 75 10
125 75 8
125 75 10
150 75 8
150 75 10
150 100 10

181.22
216.81
249.17
298.77
324.97
390.24
461.11

Formed Plate: Figure 5.24, Detail e

b = 250
b = 300
b = 350
b = 400
b = 450
b = 500
b = 550
b = 600
b = 650
b = 700
b = 750
b = 800
b = 850
b = 900
b = 950
b = 1000

NOTE The section moduli for Details c and d are based on the longer leg being located horizontally (perpendicular to the shell) when angles
with uneven legs are used.
Copyright American Petroleum Institute
Provided by IHS under license with API
No reproduction or networking permitted without license from IHS

Licensee=Techint S.A./5938621100, User=Vanoli, Ariel


Not for Resale, 05/03/2013 13:46:43 MDT

--```,,,``````,`,,,`,,,,,```,`,,-`-`,,`,,`,`,,`---

One Angle: Figure 5.24, Detail c (See Note)

You might also like