Scribd
Upload
608 views

Check For Crack Width:-: As Per IS 3370 - 2009 (Part 2), ANNEX - A, Page - 6

This document provides calculations to check for crack width in reinforced concrete structures according to IS 3370 - 2009 (Part 2). It defines variables such as area of reinforcement, beam dimensions, cover, spacing, diameter, strain, and uses them to calculate the crack width. The crack width calculation results in a value of #REF!, indicating a reference error in the spreadsheet calculations.

Uploaded by

mvap2856
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
608 views

Check For Crack Width:-: As Per IS 3370 - 2009 (Part 2), ANNEX - A, Page - 6

This document provides calculations to check for crack width in reinforced concrete structures according to IS 3370 - 2009 (Part 2). It defines variables such as area of reinforcement, beam dimensions, cover, spacing, diameter, strain, and uses them to calculate the crack width. The crack width calculation results in a value of #REF!, indicating a reference error in the spreadsheet calculations.

Uploaded by

mvap2856
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

4.1.

4 Check For Crack width :-


As per IS 3370 - 2009 (Part 2) , ANNEX - A , Page - 6
Area of reinforcement " As " =
#REF!
b =
1000
h =
#REF!
d =
#REF!
Minimum cover to tension reinforcement " CO " =
40
Maxmum bar spacing " S " =
150
Bar dia " DIA " =
16
" a
cr
" =(((S/2)^2+(CO+DIA/2)^2)^(1/2)-DIA/2) as default
or enter other value = 81.0
"acr " is distance from the point considered to the surface of the nearest longitudinal bar
Applied service moment " Ms "=
#REF!
Restricted Crack Width 0.2
moduli of elasticity of concrete " Ec" = (1/2)*(20+0.2*fcu) =
10.0
moduli of elasticity of steel " Es " =
200.0
Modular ratio " a " = (Es/Ec) =
20.00
" r " = As/bd =
#REF!
depth to neutral axis, "x" = (-a.r +((a.r)
2
+ 2.a.r)
0.5
.d =
#REF!
" Z " = d-(x/3) =
#REF!
Reinforcement stress " fs " = Ms/(As*Z) =
#REF!
Concrete stress " fc " = (fs*As)/(0.5*b*x) =
#REF!
Strain at soffit of concrete beam/slab " e1 " = (fs/Es)*(h-x)/(d-x) =
#REF!
Strain due to stiffening effect of concrete between cracks " e2 "
e
2
= b.(h-x)
2
/(3.Es.As.(d-x)) for crack widths of 0.2 mm USED
e
2
= 1.5.b.(h-x)
2
/(3.Es.As.(d-x)) for crack widths of 0.1 mm N/A
e
2
= #REF!
Average strain for calculation of crack width " e
m
"= e
1
-e
2
= #REF!
Calculated crack width, " w " = 3.a
cr
.em/(1+2.(a
cr
-c)/(h-x))
CALCULATED CRACK WIDTH, 'w' = #REF!
#REF!
mm
2
mm
mm
mm
mm
mm
mm
mm
KNm
mm
KN/mm
2
KN/mm
2
mm
mm
N/mm
2
N/mm
2
mm

You might also like