Scribd
Upload
33 views

Gantt Concurrent

This document outlines the 10 main steps to build an unmanned aerial vehicle: 1) cutting Depron body parts, 2) cutting wood parts to length, 3) assembling body parts, 4) drying time, 5) connecting sensors, servos, motors and drivers, 6) programming the flight computer, 7) connecting electronic parts to the flight computer, 8) testing the avionic system, 9) installing the avionic system and connecting control surfaces, and 10) finishing and painting the body.

Uploaded by

xatata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views

Gantt Concurrent

This document outlines the 10 main steps to build an unmanned aerial vehicle: 1) cutting Depron body parts, 2) cutting wood parts to length, 3) assembling body parts, 4) drying time, 5) connecting sensors, servos, motors and drivers, 6) programming the flight computer, 7) connecting electronic parts to the flight computer, 8) testing the avionic system, 9) installing the avionic system and connecting control surfaces, and 10) finishing and painting the body.

Uploaded by

xatata
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

No Activity

1 Cutting the Depron Body Parts


2 Cutting the wood part to length
3 Assembling the body Parts
4 Drying Time
5
Connecting the Sensors, servos, motor and Drivers together
6 Programming the Flight Computer
7 Connecting the Electronic parts to the Flight Computer
8 Testing the Avionic System
9
Laying the Avionic System in the Fuselage and connecting
Control Surfaces
10 Body Finishing and painting
Hours
9 1 2 3 4 5 6 7 8

You might also like