Scribd
Upload
6K views

Presentation On Foundations.

1. The document defines sub-structure and foundation, describing them as the supporting parts of a structure that transmit loads to the soil. 2. It describes different types of foundations, including shallow foundations like footings, strip footings, and raft foundations, as well as deep foundations like piles, piers and caissons. 3. The document provides details on pile foundations, describing their components, functions, and classifications including end bearing piles, friction piles, timber piles, concrete piles, steel piles and composite piles.

Uploaded by

shrikant
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
6K views

Presentation On Foundations.

1. The document defines sub-structure and foundation, describing them as the supporting parts of a structure that transmit loads to the soil. 2. It describes different types of foundations, including shallow foundations like footings, strip footings, and raft foundations, as well as deep foundations like piles, piers and caissons. 3. The document provides details on pile foundations, describing their components, functions, and classifications including end bearing piles, friction piles, timber piles, concrete piles, steel piles and composite piles.

Uploaded by

shrikant
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 32

SUB-STRUCTURE

Definition of Sub-Structure

 The supporting part of a structure; the


foundation. (i.e.: footing / piling, pile
cap, column stump )
 Sub-structure will include ground beams,
ground floor column and ground floor
slab.
Foundation

 Structure who support the weight of the


upper structure and applied loads.
 Designed to transmit building load to the
supportive soils or rock.
 Foundation failure : collapse or excessive
settlement of a building supporting
structure resulting from soil movement.
 Types of foundation include footings,
piles and piers.
 Foundation Anatomy
Foundation Anatomy
Foundation

 Design and selection of foundation depends on:


 Total load of building
 Nature and bearing capacity of soil

Causes of settlement are;


1. Deformation of soils causing by an imposed load
2. Volume changes of soil cause by seasonal conditions.
3. Mass movements of ground in an unstable areas.
Foundation

 Foundations can be considered under two groups:


 Shallow Foundations
 Deep Foundations

 Shallow Foundations
1. Spread Foundations / Footings
- Pad @ Isolated Foundations, Strip
Foundations and Combine Both
2. Raft Foundation
 Deep Foundations

- Pile, Pier and Caissons


Foundation

Shallow Foundations
- Shallow foundations are those founded
near to the finished ground surface;
generally where the founding depth (Df)
is less than the width of the footing and
less than 3m

BACK
Foundation

Deep Foundations

- Deep foundations are those founding


too deeply below the finished ground
surface for their base bearing capacity to
be affected by surface conditions, this is
usually at depths >3 m below finished
ground level
Foundation
Foundations

 The principal types of RC Foundation for


buildings are :

1. Strip Foundation
2. Pad @ Isolated Foundation
3. Raft Foundation
4. Combination of 1, 2 and 3
5. Piled Foundation
Foundations –
Strip Foundation

BACK
Foundations –
Strip Foundation

- Strip foundations are used to support a line


of loads, either due to a load-bearing wall, or
if a line of columns need supporting where
column positions are so close that individual
pad foundations would be inappropriate.

BACK
Foundations –
Pad @ Isolated Foundation

BACK
Foundations –
Pad @ Isolated Foundation

-Pad foundations are used to support an individual


point load such as that due to a structural column.
They may be circular, square or rectangular.

They usually consist of a block or slab of uniform


thickness, but they may be stepped or hunched if
they are required to spread the load from a heavy
column. Pad foundations are usually shallow, but
deep pad foundations can also be used.

BACK
Foundations –
Raft Foundation

BACK
Foundations –
Raft Foundation

-Raft foundations are used to spread the


load from a structure over a large area,
normally the entire area of the structure.

They are used when column loads or other


structural loads are close together and
individual pad foundations would interact.

BACK
Foundations –
Pile Foundation
Foundations –
Pile Foundation

 Structures place on top of the piles.


 Piles + Pile Cap = Pile foundation
 Function : Distributes load to the
individual piles.
 Pile Cap will connect the pile together and
distributes the superstructure loads to the
layer beneath.
Foundations –
Pile Foundation (Pile Cap)
Pile Foundation

- Pile foundations are the part of a structure used to carry


and transfer the load of the structure to the bearing ground
located at some depth below ground surface
- The main components of the foundation are the pile cap
and the piles
- Piles are long and slender members which transfer the
load to deeper soil or rock of high bearing capacity
avoiding shallow soil of low bearing capacity

- The main types of materials used for piles are Wood,


steel and concrete
Pile Foundation

Functions of Piles

- to transmit a foundation load to a solid ground


- to resist vertical, lateral and uplift load
Pile Foundation

Classifications of Piles

Classifications of piles with respect to load transmission


and functional behaviors
1. End Bearing Piles (point bearing piles)
2. Friction piles (cohesion piles )
3. Combination of friction and cohesion piles
Pile Foundation

Classifications of Piles – End Bearing

BACK
Pile Foundation

Classifications of Piles – End Bearing

- End bearing piles are those which terminate in hard,


relatively impenetrable material such as rock or very dense
sand and gravel.

- These piles transfer their load on to a firm stratum

- The pile behaves as an ordinary column and should be


designed as such

BACK
Pile Foundation

Classifications of Piles – Skin Friction

BACK
Pile Foundation

Classifications of Piles – Skin Friction


- Friction piles obtain a greater part of their carrying
capacity by skin friction or adhesion.

- This tends to occur when piles do not reach an


impenetrable stratum .

- These piles transmit most of their load to the soil through


skin friction

BACK
Pile Foundation
Classifications of Piles – Combination of friction
and end bearing
Pile Foundation

Classifications of piles with respect to type of material

1. Timber
2. Concrete
3. Steel
4. Composite piles
Pile Foundation

Classifications of Piles – Timber Piles

BACK
Pile Foundation

Classifications of Piles – Concrete Piles

BACK
Pile Foundation

Classifications of Piles – Steel Piles

BACK
Assignment

1. By group, please explain and elaborate :

What is Composite Pile


The advantage and disadvantage between
concrete piles and steel piles
The Methods of Installation (methods of piling)

- Good report must consist : Table of Content, Pictures


(pictures tell thousand words) and References

- Submission date : after mid term in the class and


prepare to do a presentation for each group.

You might also like