Scribd
Upload
303 views

Lte Cqi

UE is requested to send either periodic or a periodic reports concerning Rank indication (RI) PMI reporting is relevant for spatial multiplexing (openand closed-loop) Similar to HSPA the CQI definition is targeted at 10 % BLER whereby the overall energy per bit is nearly minimized.

Uploaded by

st0795b
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
303 views

Lte Cqi

UE is requested to send either periodic or a periodic reports concerning Rank indication (RI) PMI reporting is relevant for spatial multiplexing (openand closed-loop) Similar to HSPA the CQI definition is targeted at 10 % BLER whereby the overall energy per bit is nearly minimized.

Uploaded by

st0795b
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

How CQI, PMI and RI reporting by UE in LTE?

October 10, 2012 - LTE / 4G - Tagged: access, lte ue


The UE is requested to send either periodic or a periodic reports concerning
Rank indication (RI)
Reports are applicable for closed- and open-loop spatial multiplexing. In case of
open-loop TRI=1 corresponds to transmit diversity and TRI>1 to large delay CDD.
Precoding matrix indicator (PMI)
PMI reporting is relevant for spatial multiplexing (open- and closed-loop), MU-MIMO,
closed-loop RANK=1 precoding. PMI and RI are confined to a subset of the
codebook which is created by means of a codebookSubsetRestriction parameter.
Channel quality indication (CQI)
CQI may be wideband or may be related to subbands. Similar to HSPA the CQI
definition is targeted at 10 % BLER whereby the overall energy per bit is nearly
minimized.
For the purpose of periodic reporting the
PUCCH is utilized, a periodic reports are
sent on the PUSCH. The latter reports are explicitly requested by setting the CQI
request field in connection with an uplink grant. In case of collision the aperiodic
report will be transmitted.
Furthermore the scheduling mode can be frequency non-selective (periodic) or
frequency selective (periodic and aperiodic).
The offset is signaled by nomPDSCH-RS-EPRE-Offset.
Modulation and TB size
October 10, 2012 - LTE / 4G - Tagged: lte ue, mcs
A 5-bit modulation and coding scheme yields the modulation order, i.e. QPSK,
16QAM or 64QAM. Implicitly the coding rate is given by a combination of the number of scheduled RBs and
the signaled TB size.
The determination is based
on the signaled MCS Index IMCS.

By means of a 27110 table the resulting TB size can be determined. Part of the
table (for non two-layer spatial multiplex) is shown in the figure. A graphical display is shown below.
Note, for two-layer spatial multiplex additionally a translation table has to be applied.
In case of DCI format 1C a separate table is used.

You might also like