Document No.: Revision No.

: A
REV DESCRIPTION PREP BY CHKD BY APPR BY
A CDW
McDermott Engineering, LLC
The material contained in the attached document(s) is confidential and
proprietary. The information contained herein may be used only by the intended
recipient(s) and only for the intended purpose. Unauthorized use or distribution of
the information contained in this document(s) is prohibited.
McDermott Project No. 52473
18-Jun-2012 Issue for RFQ
PEMEX
Litoral-A Platform
PEDESTAL CRANE DATASHEET
PC-6000 A/B
REVISION DATE
230805749.xlsx.ms_office MCDERMOTT ENGINEERING, LLC
VENDOR PURCHASE ORDER NO. P.O. SUPP. NO. REQUISITION NO. SPECIFICATION NO.
TITLE EQUIPMENT NO. ENGR. PROJ. / JOB NO. PAGE _1_ OF __2_ REV. A
Pedestal Crane PC-6000 A/B
CUSTOMER NAME JOB DESCRIPTION
PEMEX Litoral-A Platform
COMPANY NAME
Rev No. BY DATE OK'D DATE APP. DATE REVISION
McDermott Engineering LLC A CDW 18-Jun-12 issued for RFQ
CUST. JOB NO. CUST. APP. DATE
ORIGINATOR ORIG. DATE
CDW 18-Jun-12
APPLICABLE TO: PROPOSAL PURCHASE AS BUILT
NOTE: INDICATES INFORMATION TO BE COMPLETED BY PURCHASER BY MANUFACTURER
CRANE DATA SHEET
SITE CONDITIONS
LOCATION: AREA CLASSIFICATIONS:
ONSHORE OFFSHORE Class I, Group D, Div. 2 for all 120 VAC items and entire boom assembly.
AMBIENT TEMPERATURE:
107 F MAX 50 F MIN
Unclassified for all remaining components.
DESIGN WIND SPEED 137 mph (storm conditions)
OPERATING CONDITIONS
RATED STATIC MAIN HOOK LOAD 40,000 LBS. AT 100 FT.
Max MAIN HOOK LOAD (Static):
RATED WHIP HOOK LOAD FT.
MAX. OPERATING RADIUS FT.
MIN. HOOK TRAVEL FT.
MIN. MAIN HOOK SPEED @ Waterline 100 (High Speed) / 80 (Slow Speed)
MIN. WHIP HOOK SPEED 200 FPM
MAIN HOOK LOAD (Dynamic):
SLEW SPEED AT RATED LOAD 1.5 RPM
LUFT RATE AT RATED LOAD 40 DEGREES/MIN.
UTILITIES
STARTING AIR PSIG
ELECTRIC POWER
DIESEL FUEL
STARTER TYPE:
STARTING AIR REQ'D. SCFM AT PSIG
POWER CONSUMPTION KW KVA
FUEL RATE GAL/HR
PERFORMANCE
CRANE TYPE Pedestal Boom HOOK SPEED AT RATED LOAD (FPM)
MFR/MODEL LOW GEAR HIGH GEAR LAYER
RATED LOAD: LBS. AT FT RADIUS MAIN
LBS. AT FT MAX RAD. WHIP
MAX RATED LOAD: LOW GEAR LBS.
HIGH GEAR LBS. LINE PULL: MAIN HOIST LBS. ( ____LAYER)
ACTUAL HOOK TRAVEL: BOOM HOIST LBS. ( ____LAYER)
MAIN HOIST FT. WHIP HOIST FT. WHIP HOIST LBS. ( ____LAYER)
ROPE LEFT ON DRUM:
MAIN HOIST FT. WHIP HOIST FT. ROPE DIA. ROPE TYPE BREAKING STRENGTH
WHIP HOIST CAPACITY LBS. MAIN IN. LBS.
SLEW SPEED AT RATED LOAD RPM WHIP IN. LBS.
LUFF RATE AT RATED LOAD DEGREES/MIN. BOOM IN. LBS.
BOOM LENGTH (See Note 1) FT.
JIB LENGTH (See Note 2) FT. HOOK CAPACITY: MAIN LBS.
REFERENCE CRANE SPECIFICATION (AV-CA-Litoral-A-EPI-W-003)
0
JRME
SPECIFICATION NO.
CRANE DATA SHEET
PAGE 2 OF 2 REV. A
TAG: PC-6000 A/B
API 2C NAMEPLATE DRIVER: DIESEL ENGINE ELECTRIC MOTOR
ANTI TWO BLOCK SYSTEM POWER: HP AT RPM
BOOM ANGLE LIMITER: LOW HIGH ENGINE MFR/MODEL
AUTOMATIC LOAD BRAKE AIR START ELECTRONIC START
BOOM REST DIMENSIONS FUEL TANK CAPACITY: GAL
SIZE WIRE ROPE RATIO SPARK ARRESTING MUFFLER
BLOCK SHEAVE IN.
HOIST SHEAVE MOTOR ENCLOSURE:
HOIST DRUM VOLTS/PHASE/HERTZ:
BOOM SHEAVE FRAME:
BOOM DRUM INSULATION:
BOOM WALKWAY Reqd (Note 6) FULL LOAD AMPS:
MECHANICAL SWING LOCK LOCKED ROTOR AMPS:
LOAD/ RADIUS INDICATOR (Note 4)
EXPLOSION PROOF COMMUTATOR RING
UPPERWORKS DRAIN TO PEDESTAL HYDRAULIC PUMPS
MFR/MODEL
BOOM LIGHTS: NUMBER: WATTS: DISPLACEMENT: FIXED VARIABLE
CAB LIGHTS: WATTS: GPM PSIG
AIRCRAFT WARNING BLINKER COMMON PUMP
BOOM HOIST PUMP
WINDSHIELD WIPER TYPE: SWING DRIVE PUMP
WARNING HORN LOAD HOIST PUMP
CAB INSTRUMENTS HYDRAULIC FLUID RESERVOIR CAPACITY: GAL
HYDRAULIC PRESSURE GAUGES DRUM HYDRAULIC DRIVE
TACHOMETER MAX GPM REQUIRED D P
HOURMETER MAIN HOIST PSI
OIL PRESSURE GAUGE WHIP HOIST PSI
WATER TEMPERATURE GAUGE BOOM HOIST PSI
FUEL LEVEL SLEW DRIVE PSI
ENGINE PROTECTION SHUTDOWNS SUCTION FILTER
HIGH WATER TEMPERATURE MFR/MODEL
LOW OIL PRESSURE RETURN FILTERS
OVERSPEED MFR/MODEL
HIGH VIBRATION
TESTING WEIGHTS AND DIMENSIONS
WITNESSED FULL LOAD TEST CRANE OPERATING WEIGHT LBS.
WITNESSED FUNCTIONAL TEST MAX OVERTURNING MOMENT FT.LBS.
NONDESTRUCTIVE TEST OF CRITICAL CRANE MAX TORSION FT.LBS.
COMPONENTS PER API 2C PEDESTAL DIAMETER IN.
TAIL SWING FT.
MAX CRANE WIDTH FT.
BOOM STOP LOAD LBS.
REMARKS:
Note 1 Boom Length 47 m. (155 ft.)
Note 2 Supply Mfg's standard Jib
Note 3 Crane to be ABS Certified
Note 4 Electronic safe load indicator system for both main and auxiliary hoist. Includes transmitter on boom tip and receiver in cab.
Note 5 Hydraulic system is Applied Hydraulics standard gear pump design with high & low speed main hoist provisions.
Note 6 Boom walkway to be provided. Boom walkway to have handrails and designed to provide maintenance access to crane appertenances.
JRME