Scribd
Upload
45 views

HW-5 Volumetric Reservoirs: Problem 1

This document contains two problems related to calculating volumetric properties of oil and gas reservoirs. Problem 1 involves calculating the reservoir volume, average pressure, original gas in place, and recovery factors for a multi-layer gas reservoir using trapezoidal and pyramidal integration rules. Problem 2 involves calculating the original oil in place, original gas in place, original solution gas in place, recovery factor, and ultimate reserve for an oil reservoir with a gas cap drive mechanism.

Uploaded by

mhmdsaalem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
45 views

HW-5 Volumetric Reservoirs: Problem 1

This document contains two problems related to calculating volumetric properties of oil and gas reservoirs. Problem 1 involves calculating the reservoir volume, average pressure, original gas in place, and recovery factors for a multi-layer gas reservoir using trapezoidal and pyramidal integration rules. Problem 2 involves calculating the original oil in place, original gas in place, original solution gas in place, recovery factor, and ultimate reserve for an oil reservoir with a gas cap drive mechanism.

Uploaded by

mhmdsaalem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HW-5

Volumetric Reservoirs

Problem 1:
We have a single phase gas reservoir with the following field data:

Contour
member
Contour Area
(Acre)
Thickness
(ft)
Pressure
(Psia)
Water
Saturation
Porosity
1 551 5 4200 0.34 0.22
2 410 6 4185 0.25 0.22
3 290 5 4102 0.2 0.22
4 142 4 4055 0.2 0.22
5 80 5 4044 0.2 0.22
6 0 - - - -

1. Please calculate the reservoir volume using trapezoidal rule and pyramidal rule. What is
difference you get using the two different integration rules?
2. Pleasecalculatetheareaaveragedandvolumeaveragepressureofthereservoir
3. Pleasecalculatetheoriginalgasinplace,usingthetrapezoidalruleforthereservoir
volume
4. If the gas formation volume factor at the average initial pressure is 0.00453 cu ft/SCF,
what is the original gas in place in units of SCF?
5. Calculate the recovery factor after producing 1 MMM SCF
6. Calculate recovery factor at abundant pressure of 500 psia with Bga=2.89 RB/MSCF and
Bgi =1.15 RB/MSCF
7. Considering a water influx into the reservoir with 60% volumetric sweep efficiency,
calculate the recovery factor at 700 psia as an abundant pressure with formation volume
factor of Bga =2.5 RB/MSCF and Sgr=0.15.






Problem 2:

Given the following data for saturated oil reservoir:
Hydrocarbon Area =25,000 Acres
Net productive thickness=50 ft with the gas/oil 10 ft from the top
Porosity =20%
Average Swi =30%
Initial reservoir pressure =3000 psia
Boi =1.68 resbbl/STB
Rsoi =700 scf/STB

1- Calculate OOIP
2- Calculate original gas in place
3- Calculate the original solution gas in place
4- What are the recovery factor and the remaining reserve when 5 MMSTB of oil has been
produced at 2500 psia?
5- Given the ultimate recovery factor for such Gas cap drive mechanism in a similar
reservoir estimated to be 30%, calculate the ultimate oil reserve for the given the
reservoir

You might also like