ISO 1 to ISO 1998

ISO 1:2002
Geometrical Product Specifications (GPS). Standard reference temperature for geometrical
product specification and verification
ISO 5-3:1995
Photography. Density measurements. Spectral conditions
ISO 5-4:1995
Photography. Density measurements. Geometric conditions for reflection density
ISO 6:1993
Photography. Black-and-white pictorial still camera negative filmprocess systems.
Determination of !S" speed
ISO 15:1998
#olling $earings. #adial $earings. Boundary dimensions% general plan
ISO 23:1993
&inematography. &amera usage of '( mm motion picture film. Specifications
ISO 25:1994
&inematography. &amera usage of )* mm motion picture film specification
ISO 26:1993
&inematography. Pro+ector usage of )* mm motion-picture films for direct front pro+ection.
Specifications
ISO 29:1980
&inematography. Pro+ector usage of , mm -ype # silent motion-picture film for direct front
pro+ection. Specifications
ISO 36:1999
#u$$er% vulcani.ed or thermoplastic. Determination of adhesion to te/tile fa$ric
ISO 53:1998
&ylindrical gears for general and heavy engineering. Standard $asic rack tooth profile
ISO 54:1996
&ylindrical gears for general engineering and for heavy engineering. 0odules
ISO 60:2000
Plastics. Determination of apparent density of material that can $e poured from a specified
funnel
ISO 61:2000
Plastics. Determination of apparent density of moulding material that cannot $e poured from a
specified funnel
ISO 62:1999
Plastics. Determination of water a$sorption
ISO 68-1:1998
!S" general purpose screw threads. Basic profile. 0etric screw threads
ISO 68-2:1998
!S" general purpose screw threads. Basic profile. !nch screw threads
ISO 69:1998
&inematography. )* mm motion-picture magnetic film. &utting and perforating dimensions
ISO 70:1981
&inematography. 0onophonic '( mm negative photographic sound record on '( mm motion-
picture film. Position and ma/imum width dimensions
ISO 75-1:1996
Plastics. Determination of temperature of deflection under load. General test method
ISO 75-2:1996
Plastics. Determination of temperature of deflection under load. Plastics and e$onite
ISO 75-3:1996
Plastics. Determination of temperature of deflection under load. 1igh-strength thermosetting
laminates and long-fi$re-reinforced plastics
ISO 78-2:1999
&hemistry. 2ayout for standards. 0ethods of chemical analysis
ISO 90-1:1999
2ight gauge metal containers. Definitions and determination of dimensions and capacities. "pen-
top cans
ISO 90-2:1999
2ight gauge metal containers. Definitions and determination of dimensions and capacities.
General use containers
ISO 90-3:2001
2ight gauge metal containers. Definitions and determination of dimensions and capacities. 2ight
gauge metal containers. Definitions and determination of dimensions and capacities. 3erosol
cans
ISO 96-1:1992
-e/tile machinery and accessories. #ings and travellers for ring spinning and ring dou$ling
frames. --rings and their appropriate travellers
ISO 96-2:1992
-e/tile machinery and accessories. #ings and travellers for ring spinning and ring dou$ling
frames. 14&1-% 14- and 5- rings and their appropriate travellers
ISO 98:2001
-e/tile machinery and accessories. Spinning preparatory and spinning machinery. 0ain
dimensions of coverings for top rollers
ISO 104:2002
#olling $earings. -hrust $earings. Boundary dimensions% general plan
ISO 105-A01:1996 Colour Scale
-e/tiles. -ests for colour fastness. Standard depths6 matt
ISO 105-A01:1996
-e/tiles. -ests for colour fastness. General principles of testing
ISO 105-A04:1999
-e/tiles. -ests for colour fastness. 0ethod for the instrumental assessment of the degree of
staining of ad+acent fa$rics
ISO 105-A05:1997
-e/tiles. -ests for colour fastness. !nstrumental assessment of change of colour for determination
of grey scale rating
ISO 105-A06:1997
-e/tiles. -ests for colour fastness. !nstrumental determination of )) standard depth of colour
ISO 105-A08:2001
-e/tiles. -ests for colour fastness. 7oca$ulary used in colour measurement
ISO 105-B01:1999
-e/tiles. -ests for colour fastness. &olour fastness to light6 Daylight
ISO 105-B02:1999
-e/tiles. -ests for colour fastness. &olour fastness to artificial light6 8enon arc fading lamp test
ISO 105-B03:1997
-e/tiles. -ests for colour fastness. &olour fastness to weathering. "utdoor e/posure
ISO 105-B04:1997
-e/tiles. -ests for colour fastness. &olour fastness to artificial weathering. 8enon arc fading
lamp test
ISO 105-B05:1996
-e/tiles. -ests for colour fastness. Detection and assessment of photochromism
ISO 105-B06:1998
-e/tiles. -ests for colour fastness. &olour fastness and ageing to artificial light at high
temperatures6 8enon arc fading lamp test
ISO 105-B08:1999
-e/tiles. -ests for colour fastness. 9uality control of $lue wool reference materials ) to :
ISO 105-C06:1997
-e/tiles. -ests for colour fastness. &olour fastness to domestic and commercial laundering
ISO 105-C07:2001
-e/tiles. -ests for colour fastness. &olour fastness to wet scru$$ing of pigment dyed or pigment
printed te/tiles
ISO 105-C08:2002
-e/tiles. -ests for colour fastness. &olour fastness to domestic and commercial laundering using
a non-phosphate reference detergent incorporating a low temperature $leach activator
ISO 105-C09:2001
-e/tiles. -ests for colour fastness. &olour fastness to domestic and commercial laundering.
"/idative $leach response using a non-phosphate reference detergent incorporating a low
temperature $leach activator
ISO 105-D01:1995
-e/tiles. -ests for colour fastness. &olour fastness to dry cleaning
ISO 105-D02:1996
-e/tiles. -ests for colour fastness. &olour fastness to ru$$ing6 "rganic solvents
ISO 105-E01:1996
-e/tiles. -ests for colour fastness. &olour fastness to water
ISO 105-E02:1996
-e/tiles. -ests for colour fastness. &olour fastness to sea water
ISO 105-E03:1997
-e/tiles. -ests for colour fastness. &olour fastness to chlorinated water (swimming $ath water)
ISO 105-E04:1996
-e/tiles. -ests for colour fastness. &olour fastness to perspiration
ISO 105-E05:1997
-e/tiles. -ests for colour fastness. &olour fastness to spotting. 3cid
ISO 105-E06:1997
-e/tiles. -ests for colour fastness. &olour fastness to spotting. 3lkali
ISO 105-E07:1997
-e/tiles. -ests for colour fastness. &olour fastness to spotting. ;ater
ISO 105-E08:1997
-e/tiles. -ests for colour fastness. &olour fastness to hot water
ISO 105-E09:1997
-e/tiles. -ests for colour fastness. &olour fastness to potting
ISO 105-E10:1997
-e/tiles. -ests for colour fastness. &olour fastness to decati.ing
ISO 105-E11:1997
-e/tiles. -ests for colour fastness. &olour fastness to steaming
ISO 105-E12:1997
-e/tiles. -ests for colour fastness. &olour fastness to milling. 3lkaline milling
ISO 105-E13:1997
-e/tiles. -ests for colour fastness. &olour fastness to acid-felting. Severe
ISO 105-E14:1997
-e/tiles. -ests for colour fastness. &olour fastness to acid-felting. 0ild
ISO 105-F03:2001
-e/tiles. -ests for colour fastness. Specification for polyamide ad+acent fa$ric
ISO 105-F04:2001
-e/tiles. -ests for colour fastness. Specification for polyester ad+acent fa$ric
ISO 105-F05:2001
-e/tiles. -ests for colour fastness. Specification for acrylic ad+acent fa$ric
ISO 105-F06:2000
-e/tiles. -ests for colour fastness. Specification for silk ad+acent fa$ric
ISO 105-F07:2001
-e/tiles. -ests for colour fastness. Specification for secondary acetate ad+acent fa$ric
ISO 105-G01:1996
-e/tiles. -ests for colour fastness. &olour fastness to nitrogen o/ides
ISO 105-G02:1997
-e/tiles. -ests for colour fastness. &olour fastness to $urnt-gas fumes
ISO 105-G03:1997
-e/tiles. -ests for colour fastness. &olour fastness to o.one in the atmosphere
ISO 105-01:2000
-e/tiles. -ests for colour fastness. General principles for measurement of surface colour
ISO 105-02:2000
-e/tiles. -ests for colour fastness. !nstrumental assessment of relative whiteness
ISO 105-03:1997
-e/tiles. -ests for colour fastness. &alculation of colour differences
ISO 105-!02:1995
-e/tiles. -ests for colour fastness. &olour fastness to $leaching6 Pero/ide
ISO 105-!03:1995
-e/tiles. -ests for colour fastness. &olour fastness to $leaching6 Sodium chlorite (mild)
ISO 105-!04:1995
-e/tiles. -ests for colour fastness. &olour fastness to $leaching6 Sodium chlorite (severe)
ISO 105-!05:1995
-e/tiles. -ests for colour fastness. &olour fastness to stoving
ISO 105-"01:1995
-e/tiles. -ests for colour fastness. &olour fastness to dry heat (e/cluding pressing)
ISO 105-"02:1996
-e/tiles. -ests for colour fastness. &olour fastness to pleating. Steam pleating
ISO 105-S01:1996
-e/tiles. -ests for colour fastness. &olour fastness to vulcani.ation. 1ot air
ISO 105-S02:1996
-e/tiles. -ests for colour fastness. &olour fastness to vulcani.ation6 Sulfur monochloride
ISO 105-S03:1996
-e/tiles. -ests for colour fastness. &olour fastness to vulcani.ation. "pen steam
ISO 105-#01:1996
-e/tiles. -ests for colour fastness. &olour fastness to car$oni.ing6 3luminium chloride
ISO 105-#02:1996
-e/tiles. -ests for colour fastness. &olour fastness to car$oni.ing6 Sulfuric acid
ISO 105-#04:1997
-e/tiles. -ests for colour fastness. &olour fastness to merceri.ing
ISO 105-#05:1997
-e/tiles. -ests for colour fastness. &olour fastness to organic solvents
ISO 105-#06:1997
-e/tiles. -ests for colour fastness. &olour fastness to soda $oiling
ISO 105-#07:1997
-e/tiles. -ests for colour fastness. &olour fastness to cross-dyeing. ;ool
ISO 105-#08:1997
-e/tiles. -ests for colour fastness. &olours fastness to degumming
ISO 105-#09:1996
-e/tiles. -ests for colour fastness. &olour fastness to formaldehyde
ISO 105-#10:1996
-e/tiles. -ests for colour fastness. 3ssessment of migration of te/tile colours into polyvinyl
chloride coatings
ISO 105-#11:1996
-e/tiles. -ests for colour fastness. &olour fastness to hot pressing
ISO 105-#12:2002
-e/tiles. -ests for colour fastness. &olour fastness to ru$$ing
ISO 105-#13:1997
-e/tiles. -ests for colour fastness. &olour fastness of wool dyes to processes using chemical
means for creasing% pleating and setting
ISO 105-#14:1997
-e/tiles. -ests for colour fastness. &olour fastness to acid chlorination of wool. Sodium
dichloroisocyanurate
ISO 105-#16:2001
-e/tiles. -ests for colour fastness. &olour fastness to ru$$ing. Small areas
ISO 105-$01:1996
-e/tiles. -ests for colour fastness. &olour fastness to metals in the dye-$ath6 chromium salts
ISO 105-$02:1996
-e/tiles. -ests for colour fastness. &olour fastness to metals in the dye-$ath. !ron and copper
ISO 105-$03:1998
-e/tiles. -ests for colour fastness. !ntercompati$ility of $asic dyes for acrylic fi$res
ISO 105-$04:1998
-e/tiles. -ests for colour fastness. Dispersi$ility of disperse dyes
ISO 105-$05:1998
-e/tiles. -ests for colour fastness. Determination of the dusting $ehaviour of dyes
ISO 105-$06:2000
-e/tiles. -ests for colour fastness. <valuation of dye and pigment migration
ISO 105-$07:1998
-e/tiles. -ests for colour fastness. Determination of application solu$ility and solution sta$ility
of water-solu$le dyes
ISO 105-$08:1998
-e/tiles. -ests for colour fastness. Determination of solu$ility and solution sta$ility of reactive
dyes in the presence of electrolytes
ISO 105-$09:1998
-e/tiles. -ests for colour fastness. Determination of cold water solu$ility of water-solu$le dyes
ISO 105-$10:1999
-e/tiles. -ests for colour fastness. Determination of relative colour strength of dyes in solution
ISO 105-$11:2001
-e/tiles. -ests for colour fastness. <valuation of speckiness of colorant dispersions
ISO 113:1999
#olling $earings. Plummer $lock housings. Boundary dimensions
ISO 119:1998
Plastics. Phenol-formaldehyde mouldings. Determination of free phenols. !odometric method
ISO 120:1998
Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium
compounds. &olorimetric comparison method
ISO 123:2001
#u$$er late/. Sampling
ISO 128:1982
-echnical drawings. General principles of presentation
ISO 128-20:2001
-echnical drawings. General principles of presentation. Basic conventions for lines
ISO 128-21:2001
-echnical drawings. General principles of presentation. Preparation of lines $y &3D systems
ISO 128-22:1999
-echnical drawings. General principles of presentation. Basic conventions and applications for
leader lines and reference lines
ISO 128-23:1999
-echnical drawings. General principles of presentation. 2ines on construction drawings
ISO 128-24:1999
-echnical drawings. General principles of presentation. 2ines on mechanical engineering
drawings
ISO 128-25:1999
-echnical drawings. General principles of presentation. 2ines on ship$uilding drawings
ISO 128-30:2001
-echnical drawings. General principles of presentation. Basic conventions for views
ISO 128-34:2001
-echnical drawings. General principles of presentation. 7iews on mechanical engineering
drawings
ISO 128-40:2001
-echnical drawings. General principles of presentation. Basic conventions for cuts and sections
ISO 128-44:2001
-echnical drawings. General principles of presentation. Sections on mechanical engineering
drawings
ISO 128-50:2001
-echnical drawings. General principles of presentation. Basic conventions for representing areas
on cuts and sections
ISO 129:1985
-echnical drawings. Dimensioning. General principles% definitions% methods of e/ecution and
special indications
ISO 132:1999
#u$$er% vulcani.ed or thermoplastic. Determination of fle/ cracking and crack growth (De
0attia)
ISO 140-1:1998
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements.
#e=uirements for la$oratory test facilities with suppressed flanking transmission
ISO 140-3:1995
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements. 2a$oratory
measurement of air$orne sound insulation of $uilding elements
ISO 140-4:1998
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements. >ield
measurements of air$orne sound insulation $etween rooms
ISO 140-5:1998
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements. >ield
measurements of air$orne sound insulation of facade elements and facades
ISO 140-6:1998
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements. 2a$oratory
measurements of impact sound insulation of floors
ISO 140-7:1998
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements. >ield
measurements of impact sound insulation of floors
ISO 140-8:1998
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements. 2a$oratory
measurements of the reduction of transmitted impact noise $y floor coverings on a heavyweight
standard floor
ISO 140-12:2000
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements. 2a$oratory
measurement of room-to-room air$orne and impact sound insulation of an access floor
ISO 155:1998
Belt drives. Pulleys. 2imiting values for ad+ustment of centres
ISO 172:1998
Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia
ISO 175:2001
Plastics. 0ethods of test for the determination of the effects of immersion in li=uid chemicals
ISO 176:2000
Plastics. Determination of loss of plastici.ers. 3ctivated car$on method
ISO 177:2000
Plastics. Determination of migration of plastici.ers
ISO 178:2003
Plastics. Determination of fle/ural properties
ISO 179:1997
Plastics. Determination of &harpy impact strength
ISO 179-1:2001
Plastics. Determination of &harpy impact properties. ?on-instrumented impact test
ISO 179-2:1999
Plastics. Determination of &harpy impact properties. !nstrumented impact test
ISO 180:2001
Plastics. Determination of !.od impact strength
ISO 182-2:2000
Plastics. Determination of the tendency of compounds and products $ased on vinyl chloride
homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at
elevated temperatures. p1 method
ISO 182-3:2000
Plastics. Determination of the tendency of compounds and products $ased on vinyl chloride
homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at
elevated temperatures. &onductometric method
ISO 182-3:2001
Plastics. Determination of the tendency of compounds and products $ased on vinyl chloride
homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at
elevated temperatures. &onductometric method
ISO 182-4:2000
Plastics. Determination of the tendency of compounds and products $ased on vinyl chloride
homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at
elevated temperatures. Potentiometric method
ISO 183:2000
Plastics. 9ualitative evaluation of the $leeding of colorants
ISO 186:2002
Paper and $oard. Sampling to determine average =uality
ISO 188:1998
#u$$er% vulcani.ed or thermoplastic. 3ccelerated ageing and heat resistance tests
ISO 196:1995
;rought copper and copper alloys. Detection of residual stress. 0ercury(!) nitrate test
ISO 199:1997
#olling $earings. -hrust $earings. -olerances
ISO 212:1973
<ssential oils. Sampling
ISO 216:2001
;riting paper and certain classes of printed matter. -rimmed si.es. 3 and B series
ISO 226:2003
3coustics. ?ormal e=ual-loudness-level contours
ISO 228-1:2003
Pipe threads where pressure-tight +oints are not made on the threads. Dimensions% tolerances and
designation
ISO 228-2:2003
Pipe threads where pressure-tight +oints are not made on the threads. 7erification $y means of
limit gauges
ISO 230-1:1996
-est code for machine tools. Geometric accuracy of machines operating under no-load or
finishing conditions
ISO 230-2:1997
-est code for machine tools. Determination of accuracy and repeata$ility of positioning of
numerically controlled machine tool a/es
ISO 230-3:2001
-est code for machine tools. Determination of thermal effects
ISO 230-4:1996
-est code for machine tools. &ircular tests for numerically controlled machine tools
ISO 230-5:2000
-est code for machine tools. Determination of the noise emission
ISO 230-6:2002
-est code for machine tools. Determination of positioning accuracy on $ody and face diagonals
(Diagonal displacement tests)
ISO 246:1995
#olling $earings. &ylindrical roller $earings% separate thrust collars. Boundary dimensions
ISO 251:2003
&onveyor $elts with te/tile carcass. ;idths and lengths
ISO 252-1:1999
-e/tile conveyor $elts. 3dhesive strength $etween constitutive elements. 0ethods of test
ISO 254:1998
Belt drives. Pulleys. 9uality% finish and $alance
ISO 261:1998
!S" general purpose metric screw threads. General plan
ISO 262:1998
!S" general purpose metric screw threads. Selected si.es for screws% $olts and nuts
ISO 266:1997
3coustics. Preferred fre=uencies
ISO 276:2002
Binders for paints and varnishes. 2inseed stand oil. #e=uirements and methods of test
ISO 277:2002
Binders for paints and varnishes. #aw tung oil. #e=uirements and methods of test
ISO 279:1998
<ssential oils. Determination of relative density at @ABAD&. #eference method
ISO 280:1998
<ssential oils. Determination of refractive inde/
ISO 283-1:2000
-e/tile conveyor $elts. >ull thickness tensile testing. Determination of tensile strength%
elongation at $reak and elongation at the reference load
ISO 284:2003
&onveyor $elts. <lectrical conductivity. Specification and test method
ISO 291:1997
Plastics. Standard atmospheres for conditioning and testing
ISO 293:2003
Plastics. &ompression moulding test specimens of thermoplastic materials
ISO 294-1:1998
Plastics. !n+ection moulding of test specimens of thermoplastic materials. General principles% and
moulding of multipurpose and $ar test specimens
ISO 294-2:1998
Plastics. !n+ection moulding of test specimens of thermoplastic materials. Small tensile $ars
ISO 294-3:2003
Plastics. !n+ection moulding of test specimens of thermoplastic materials. Small plates
ISO 294-4:2003
Plastics. !n+ection moulding of test specimens of thermoplastic materials. Determination of
moulding shrinkage
ISO 295:1999
Plastics. &ompression moulding of test specimens of thermosetting materials
ISO 305:1999
Plastics. Determination of thermal sta$ility of poly (vinyl chloride) related chlorine-containing
homopolymers and copolymers and their compounds. Discoloration method
ISO 306:1997
Plastics. -hermoplastic materials. Determination of 7icat softening temperature (7S-)
ISO 307:2003
Plastics. Polyamides. Determination of viscosity num$er
ISO 308:1998
Plastics. Phenolic moulding materials. Determination of acetone-solu$le matter (apparent resin
content of material in the unmoulded state)
ISO 354:2003
3coustics. 0easurement of sound a$sorption in a rever$eration room
ISO 356:1996
<ssential oils. Preparation of test samples
ISO 359:1983
&inematography. Pro+ecta$le image area on )* mm motion-picture prints. Dimensions and
location
ISO 362:1998
3coustics. 0easurement of noise emitted $y accelerating road vehicles. <ngineering method
ISO 363:1992
-e/tile machinery and accessories. >lat steel healds with closed end loops. Dimensions
ISO 366-4:1992
-e/tile machinery and accessories. #eeds. Plastic $ound metal reeds. Dimensions and
designation
ISO 368:1991
Spinning preparatory% spinning and dou$ling (twisting) machinery. -u$es for ring-spinning%
dou$ling and twisting spindles% taper )6', and )6*C
ISO 376:2002
0etallic materials. &ali$ration of force-proving instruments used for the verification of unia/ial
testing machines
ISO 377:1997
Steel and steel products. 2ocation and preparation of samples and test pieces for mechanical
testing
ISO 389-1:2000
3coustics. #eference .ero for the cali$ration of audiometric e=uipment. #eference e=uivalent
threshold sound pressure levels for pure tones and supra-aural earphones
ISO 389-2:1997
3coustics. #eference .ero for the cali$ration of audiometric e=uipment. #eference e=uivalent
threshold sound pressure levels for pure tones and insert earphones
ISO 389-3:1999
3coustics. #eference .ero for the cali$ration of audiometric e=uipment. #eference e=uivalent
threshold force levels for pure tones and $one vi$rators
ISO 389-4:1999
3coustics. #eference .ero for the cali$ration of audiometric e=uipment. #eference levels for
narrow-$and masking noise
ISO 389-5:2001
3coustics. #eference .ero for the cali$ration of audiometric e=uipment. #eference e=uivalent
threshold sound pressure levels for pure tones in the fre=uency range , k1. to )* k1.
ISO 389-7:1998
3coustics. #eference .ero for the cali$ration of audiometric e=uipment. #eference threshold of
hearing under free-field and diffuse-field listening conditions
ISO 406:1987
-echnical drawings. -olerancing of linear and angular dimensions
ISO 418:2001
Photography. Processing chemicals. Specifications for anhydrous sodium sulfite
ISO 420:1994
Photography. Processing chemicals. Specifications for potassium $romide
ISO 422:1994
Photography. Processing chemicals. Specifications for p-methylaminophenol sulfate
ISO 423:1994
Photography. Processing chemicals. Specification for hydro=uinone
ISO 424:1994
Photography. Processing chemicals. Specification for anhydrous sodium car$onate and sodium
car$onate monohydrate
ISO 445:1999
Pallets for materials handling. 7oca$ulary
ISO 449:2000
Ships and marine technology. 0agnetic compasses% $innacles and a.imuth reading devices.
&lass 3
ISO 464:1995
#olling $earings. #adial $earings with locating snap ring. Dimensions and tolerances
ISO 472:2001
Plastics. 7oca$ulary
ISO 483:1999
Plastics. Small enclosures for conditioning and testing using a=ueous solutions to maintain
relative humidity at constant value
ISO 486:1988
&inematography. )* mm motion-picture film perforated , mm -ype #. &utting and perforating
dimensions
ISO 487:1998
Steel roller chains% types S and &% attachments and sprockets
ISO 489:1999
Plastics. Determination of refractive inde/
ISO 490:1993
&inematography. 0agnetic stripes and magnetic recording head gaps for sound record on )* mm
motion-picture film perforated along one edge (-ype )). Positions and width dimensions
ISO 491:2002
&inematography. '( mm motion-picture film and magnetic film. &utting and perforating
dimensions
ISO 492:2002
#olling $earings. #adial $earings. -olerances
ISO 505:2000
&onveyor $elts. 0ethod for the determination of the tear propagation resistance of te/tile
conveyor $elts
ISO 509:1996
Pallet trucks. Principal dimensions
ISO 516:1999
Photography. &amera shutters. -iming
ISO 525:1999
Bonded a$rasive products. General re=uirements
ISO 527-1:1996
Plastics. Determination of tensile properties. General principles
ISO 527-2:1996
Plastics. Determination of tensile properties. -est conditions for moulding and e/trusion plastics
ISO 527-3:1996
Plastics. Determination of tensile properties. -est conditions for films and sheets
ISO 527-4:1997
Plastics. Determination of tensile properties. -est conditions for isotropic and orthotropic fi$re-
reinforced plastic composites
ISO 527-5:1997
Plastics. Determination of tensile properties. -est conditions for unidirectional fi$re-reinforced
plastic composites
ISO 536:1997
Paper and $oard. Determination of grammage
ISO 542:1995
"ilseeds. Sampling
ISO 582:1995
#olling $earings. &hamfer dimensions. 0a/imum values
ISO 583-1:2000
&onveyor $elts with a te/tile carcass. -otal thickness and thickness of elements. 0ethods of test
ISO 584:1998
Plastics. Dnsaturated polyester resins. Determination of reactivity at ,A BAD& (conventional
method)
ISO 585:1999
Plastics. Dnplastici.ed cellulose acetate. Determination of moisture content
ISO 591-1:2000
-itanium dio/ide pigments for paints. Specifications and methods of test
ISO 592:1998
<ssential oils. Determination of optical rotation
ISO 595-2:1995
#eusa$le all-glass or metal-and-glass syringes for medical use. Design% performance
re=uirements and tests
ISO 603-1:1999
Bonded a$rasive products. Dimensions. Grinding wheels for e/ternal cylindrical grinding
$etween centres
ISO 603-2:1999
Bonded a$rasive products. Dimensions. Grinding wheels for centreless e/ternal cylindrical
grinding
ISO 603-3:1999
Bonded a$rasive products. Dimensions. Grinding wheels for internal cylindrical grinding
ISO 603-4:1999
Bonded a$rasive products. Dimensions. Grinding wheels for surface grindingperipheral grinding
ISO 603-5:1999
Bonded a$rasive products. Dimensions. Grinding wheels for surface grindingface grinding
ISO 603-6:1999
Bonded a$rasive products. Dimensions. Grinding wheels for tool and toolroom grinding
ISO 603-7:1999
Bonded a$rasive products. Dimensions. Grinding wheels for manually guided grinding
ISO 603-8:1999
Bonded a$rasive products. Dimensions. Grinding wheels for de$urring and fettlingsnagging
ISO 603-9:1999
Bonded a$rasive products. Dimensions. Grinding wheels for high pressure grinding
ISO 603-10:1999
Bonded a$rasive products. Dimensions. Stones for honing and superfinishing
ISO 603-11:1999
Bonded a$rasive products. Dimensions. 1and finishing sticks
ISO 603-12:1999
Bonded a$rasive products. Dimensions. Grinding wheels for de$urring and fettling on a straight
grinder
ISO 603-13:1999
Bonded a$rasive products. Dimensions. Grinding wheels for de$urring and fettling on a vertical
grinder
ISO 603-14:1999
Bonded a$rasive products. Dimensions. Grinding wheels for de$urring and fettlingsnagging on
an angle grinder
ISO 603-15:1999
Bonded a$rasive products. Dimensions. Grinding wheels for cutting-off on stationary or mo$ile
cutting-off machines
ISO 603-16:1999
Bonded a$rasive products. Dimensions. Grinding wheels for cutting-off on hand-held power
tools
ISO 604:2003
Plastics. Determination of compressive properties
ISO 611:2003
#oad vehicles. Braking of automotive vehicles and their trailers. 7oca$ulary
ISO 613:2001
Ships and marine technology. 0agnetic compasses% $innacles and a.imuth reading devices.
&lass B
ISO 639-1:2002
&odes for the representation of the names of languages. 3lpha-@ code
ISO 639-2:1998
&odes for the representation of the names of languages. 3lpha-' code
ISO 642:1999
Steel hardena$ility test $y end =uenching (5ominy test)
ISO 643:2003
Steels. 0icrographic determination of the apparent grain si.e
ISO%IEC 646:1991
!nformation technology. !S" :-$it coded character set for information interchange
ISO 658:2002
"ilseeds. Determination of content of impurities
ISO 659:1999
"ilseeds. Determination of oil content (#eference method)
ISO 660:2000
3nimal and vegeta$le fats and oils. Determination of acid value and acidity
ISO 661:1995
3nimal and vegeta$le fats and oils. Preparation of test sample
ISO 662:2001
3nimal and vegeta$le fats and oils. Determination of moisture and volatile matter content
ISO 663:2001
3nimal and vegeta$le fats and oils. Determination of insolu$le impurities content
ISO 664:1995
"ilseeds. #eduction of la$oratory sample to test sample
ISO 665:2000
"ilseeds. Determination of moisture and volatile matter content
ISO 666:1996
0achine tools. 0ounting of plain grinding wheels $y means of hu$ flanges
ISO 668:1995
Series ) freight containers. &lassification% dimensions and ratings
ISO 683-17:1999
1eat-treated steels% alloy steels and free-cutting steels. Ball and roller $earing steels
ISO 690-2:1997
!nformation and documentation. Bi$liographic references. <lectronic documents or parts thereof
ISO 694:2001
Ships and marine technology. Positioning of magnetic compasses in ships
ISO 701:1998
!nternational gear notation. Sym$ols for geometrical data
ISO 703-1:2000
&onveyor $elts. -ransverse fle/i$ility and trougha$ility. -est method
ISO 704:2000
-erminology work. Principles and methods
ISO 707:1997
0ilk and milk products. Guidance on sampling
DD ISO 709:1980
<ssential oils. Determination of ester value
ISO 709:2001
<ssential oils. Determination of ester value
ISO 717-1:1997
3coustics. #ating of sound insulation in $uildings and of $uilding elements. 3ir$orne sound
insulation
ISO 717-2:1997
3coustics. #ating of sound insulation in $uildings and of $uilding elements. !mpact sound
insulation
ISO 727-1:2002
>ittings made from unplastici.ed poly (vinyl chloride) (P7&-D)% chlorinated poly(vinyl chloride)
(P7&-&) or acrylonitrile$utadienestyrene (3BS) with plain sockets for pipes under pressure.
0etric series
ISO 727-2:2002
>ittings made from unplastici.ed poly (vinyl chloride) (P7&-D)% chlorinated poly(vinyl chloride)
(P7&-&) or acrylonitrile$utadienestyrene (3BS) with plain sockets for pipes under pressure.
!nch-$ased series
ISO 732:2000
Photography. )@A-si.e and @@A-si.e films. Dimensions
ISO 734-1:2001
"ilseed residues. Determination of oil content. </traction method with he/ane (or light
petroleum)
ISO 734-2:2001
"ilseed residues. Determination of oil content. #apid e/traction method
ISO 748:2000
0easurement of li=uid flow in open channels. 7elocity-area methods
ISO 764:2002
1orology. 0agnetic resistant watches
ISO 772:2001
1ydrometric determinations. 7oca$ulary and sym$ols
ISO 777:2001
Paper% $oard and pulp. Determination of calcium
ISO 778:2001
Paper% $oard and pulp. Determination of copper
ISO 779:2001
Paper% $oard and pulp. Determination of iron
ISO 780:1999
Packaging. Pictorial marking for handling of goods
ISO 787-2:1995
General methods of test for pigments and e/tenders. Determination of matter volatile at
)A(BAD&
ISO 787-3:2001
General methods of test for pigments and e/tenders. Determination of matter solu$le in water.
1ot e/traction method
ISO 787-5:1995
General methods of test for pigments and e/tenders. Determination of oil a$sorption value
ISO 787-8:2001
General methods of test for pigments and e/tenders. Determination of matter solu$le in water.
&old e/traction method
ISO 787-9:1995
General methods of test for pigments and e/tenders. Determination of p1 value of a=ueous
suspension
ISO 787-10:1995
General methods of test for pigments and e/tenders. Determination of density. Pyknometer
method
ISO 787-11:1995
General methods of test for pigments and e/tenders. Determination of tamped volume and
apparent density after tamping
ISO 787-13:2002
General methods of test for pigments and e/tenders. Determination of water-solu$le sulfates%
chlorides and nitrates
ISO 787-14:2002
General methods of test for pigments and e/tenders. Determination of resistivity of a=ueous
e/tract
ISO 787-15:1995
General methods of test for pigments and e/tenders. &omparison of resistance to light of
coloured pigments of similar types
ISO 787-16:1995
General methods of test for pigments and e/tenders. Determination of relative tinting strength (or
e=uivalent colouring value) and colour on reduction of coloured pigments. 7isual comparison
method
ISO 787-17:2002
General methods of test for pigments and e/tenders. &omparison of lightening power of white
pigments
ISO 787-18:1995
General methods of test for pigments and e/tenders. Determination of residue on sieve.
0echanical flushing procedure
ISO 787-19:1995
General methods of test for pigments and e/tenders. Determination of water-solu$le nitrates
(Salicylic acid method)
ISO 787-23:1995
General methods of test for pigments and e/tenders. Determination of density (using a centrifuge
to remove entrained air)
ISO 787-24:1995
General methods of test for pigments and e/tenders. Determination of relative tinting strength of
coloured pigments and relative scattering power of white pigments. Photometric methods
ISO 801-1:1997
Pulps. Determination of salea$le mass in lots. Pulp $aled in sheet form
ISO 801-3:1997
Pulps. Determination of salea$le mass in lots. Dniti.ed $ales
ISO 830:1999
>reight containers. 7oca$ulary
ISO 832:1994
!nformation and documentation. Bi$liographic description and references. #ules for the
a$$reviation of $i$liographic terms
ISO 844:2001
&ellular plastics. &ompression test for rigid materials. Specification
ISO 845:1995
&ellular plastics and ru$$ers. Determination of apparent ($ulk) density
ISO 846:1997
Plastics. <valuation of the action of microorganisms
ISO 862:1995
Glossary of terms for surface active agents
ISO 868:2003
Plastics and e$onite. Determination of indentation hardness $y means of a durometer (Shore
hardness)
ISO 871:1996
Plastics. Determination of ignition temperature using a hot-air furnace
ISO 875:1999
<ssential oils. <valuation of misci$ility in ethanol
ISO 877:1997
Plastics. 0ethods of e/posure to direct weathering% to weathering using glass-filtered daylight%
and to intensified weathering $y daylight using >resnel mirrors.
ISO 885:2000
General purpose $olts and screws. 0etric series. #adii under the head
ISO 887:2000
Plain washers for metric $olts% screws and nuts for general purposes. General plan
ISO 897:2000
Photography. #oll films% )@*% ))A and )'(- si.e films. !dentification of the image-$earing side
ISO 898-1:1999
0echanical properties of fasteners made of car$on steel and alloy steel. Bolts% screws and studs
ISO 898-5:1999
0echanical properties of fasteners made of car$on steel and alloy steel. Set screws and similar
threaded fasteners not under tensile stresses
ISO 898-6:1996
0echanical properties of fasteners. ?uts with specified proof load values. >ine pitch thread
ISO 899-1:2003
Plastics. Determination of creep $ehaviour. -ensile creep
ISO 899-2:2003
Plastics. Determination of creep $ehaviour. >le/ural creep $y three-point loading
ISO 923:2000
&oal cleaning e=uipment. Performance evaluation
ISO 945:1994
&ast iron. Designation of microstructure of graphite
ISO 960:1998
Plastics. Polyamides (P3). Determination of water content
ISO 965-1:1998
!S" general purpose metric screw threads. -olerances. Principles and $asic data
ISO 965-2:1998
!S" general purpose metric screw threads. -olerances. 2imits of si.es for general purpose
e/ternal and internal screw threads. 0edium =uality
ISO 965-3:1998
!S" general purpose metric screw threads. -olerances. Deviations for constructional screw
threads
ISO 965-4:1998
!S" general purpose metric screw threads. -olerances. 2imits of si.es for hot-dip galvani.ed
e/ternal screw threads to mate with internal screw threads tapped with tolerance position 1 or G
after galvani.ing
ISO 965-5:1998
!S" general purpose metric screw threads. -olerances. 2imits of si.es for internal screw threads
to mate with hot-dip galvani.ed e/ternal screw threads with ma/imum si.e of tolerance position
h $efore galvani.ing
ISO 974:2000
Plastics. Determination of the $rittleness temperature $y impact
ISO 999:1996
!nformation and documentation. Guidelines for the content% organi.ation and presentation of
inde/es
ISO 1007:2000
Photography. )'(-si.e film and maga.ine. Specifications
ISO 1008:1992
Photography. Paper dimensions. Pictorial sheets
ISO 1009:2000
Photography. Paper dimensions. #olls for printers
ISO 1012:1998
Photography. >ilms in sheets and rolls for general use. Dimensions
ISO 1039:1995
&inematography. &ores for motion-picture and magnetic film rolls. Dimensions
ISO 1041:1973
<ssential oils. Determination of free.ing point
ISO 1042:2000
2a$oratory glassware. "ne-mark volumetric flasks
ISO 1043-1:2002
Plastics. Sym$ols and a$$reviated terms. Basic polymers and their special characteristics
ISO 1043-2:2001
>illers and reinforcing materials
ISO 1043-3:1999
Plastics. Sym$ols and a$$reviated terms. Plastici.ers
ISO 1043-4:1999
Plastics. Sym$ols and a$$reviated terms. >lame retardants
ISO 1048:1991
Photography. </posed roll films. !dentification
ISO 1051:1999
#ivet shank diameters
ISO 1060-1:1999
Plastics. 1omopolymer and copolymer resins of vinyl chloride. Designation system and $asis for
specifications
ISO 1060-2:1999
Plastics. 1omopolymer and copolymer resins of vinyl chloride. Preparation of test samples and
determination of properties
ISO 1061:1999
Plastics. Dnplastici.ed cellulose acetate. Determination of free acidity
ISO 1071:2003
;elding consuma$les. &overed electrodes% wires% rods and tu$ular cored electrodes for fusion
welding of cast iron. &lassification
ISO 1085:1999
3ssem$ly tools for screws and nuts. Dou$le-ended wrenches. Si.e pairing
ISO 1087-1:2000
-erminology work. 7oca$ulary. -heory and application
ISO 1087-2:2000
-erminology work. 7oca$ulary. &omputer applications
ISO 1100-2:1998
0easurement of li=uid flow in open channels. Determination of the stage-discharge relation
ISO 1101:1983
-echnical drawings. Geometrical tolerancing. -olerancing of form% orientation% location and run-
out. Generalities% definitions% sym$ols% indications on drawings
ISO 1107:2003
>ishing nets. ?etting. Basic terms and definitions
ISO 1110:1998
Plastics. Polyamides. 3ccelerated conditioning of test specimens
ISO 1112:1999
1orology. >unctional and non-functional +ewels
ISO 1116:1999
0icrographics. )* mm and '( mm microfilm spools and reels. Specifications
ISO 1120:2002
&onveyor $elts. Determination of strength of mechanical fastenings. Static test method
ISO 1122-1:1998
7oca$ulary of gear terms. Definitions related to geometry
ISO 1127:1997
Stainless steel tu$es. Dimensions% tolerances and conventional masses per unit length
ISO 1132-1:2000
#olling $earings. -olerances. -erms and definitions
ISO 1132-2:2001
#olling $earings. -olerances. 0easuring and gauging principles and methods
ISO 1133:2000
Plastics. Determination of the melt mass-flow rate (0>#) and the melt volume-flow rate (07#)
of thermoplastics
ISO 1157:2000
Plastics. &ellulose acetate in dilute solution. Determination of viscosity num$er and viscosity
ratio
ISO 1158:1998
Plastics. 7inyl chloride homopolymers and copolymers. Determination of chlorine content
ISO 1163-1:2000
Plastics. Dnplastici.ed poly(vinyl chloride) (P7&-D) moulding and e/trusion materials.
Designation system and $asis for specifications
ISO 1163-2:2000
Plastics. Dnplastici.ed poly(vinyl chloride) (P7&-D) moulding and e/trusion materials.
Preparation of test specimens and determination of properties
ISO 1172:1999
-e/tile-glass-reinforced plastics. Prepregs% moulding compounds and laminates. Determination
of the te/tile-glass and mineral-filler content. &alcination methods
ISO 1173:2001
3ssem$ly tools for screws and nuts. Drive ends for hand and machine-operated screwdriver $its
and connecting parts. Dimensions% tor=ue testing
ISO 1182:2002
#eaction to fire tests for $uilding products. ?on-com$usti$ility test
ISO 1183-3:1999
Plastics. 0ethods for determining the density of non-cellular plastics. Gas pyknometer method
ISO 1189:1986
&inematography. #ecorded characteristic for magnetic sound records on '( mm motion-picture
film e/cluding striped release prints. Specifications
ISO 1202:1981
<ssential oils. Determination of )%,-cineole content
ISO 1203:1998
Photography. #oll film cameras. Back window location
ISO 1206:2001
#olling $earings. ?eedle roller $earings% dimension series C,% CE and *E. Boundary dimensions
and tolerances
ISO 1207:1994
Slotted cheese head screws. Product grade 3
ISO 1211:2001
0ilk. Determination of fat content. Gravimetric method (#eference method)
ISO 1217:1996
Displacement compressors. 3cceptance tests
ISO 1219-2:1995
>luid power systems and components. Graphic sym$ols and circuit diagrams. &ircuit diagrams
ISO 1222:2003
Photography. -ripod connections
ISO 1223:2003
&inematography. Picture areas for motion-picture films for television. Position and dimensions
ISO 1230:1992
Photography. Determination of flash guide num$ers
ISO 1234:1998
Split pins
ISO 1241:1996
<ssential oils. Determination of ester values% $efore and after acetylation% and evaluation of the
contents of free and total alcohols
ISO 1242:1999
<ssential oils. Determination of acid value
ISO 1264:1997
Plastics. 1omopolymer and copolymer resins of vinyl chloride. Determination of p1 of a=ueous
e/tract
ISO 1265:1997
Plastics. Polyvinyl chloride resins. Determination of num$er of impurities and foreign particles
ISO 1268-1:2001
>i$re-reinforced plastics. 0ethods of producing test plates. General conditions
ISO 1268-2:2001
>i$re-reinforced plastics. 0ethods of producing test plates. &ontact and spray-up moulding
ISO 1268-3:2000
>i$re-reinforced plastics. 0ethods of producing test plates. ;et compression moulding
ISO 1268-5:2001
>i$re-reinforced plastics. 0ethods of producing test plates. >ilament winding
ISO 1268-6:2002
>i$re-reinforced plastics. 0ethods of producing test plates. Pultrusion moulding
ISO 1268-7:2001
>i$re-reinforced plastics. 0ethods of producing test plates. #esin transfer moulding
ISO 1268-9:2003
>i$re-reinforced plastics. 0ethods of producing test plates. 0oulding of G0-S-&
ISO 1271:1983
<ssential oils. Determination of car$onyl value. >ree hydro/ylamine method
ISO 1272:2000
<ssential oils. Determination of content of phenols
ISO 1275:1995
Dou$le-pitch precision roller chains and sprockets for transmission and conveyors
ISO 1279:1996
<ssential oils. Determination of car$onyl value. Potentiometric methods using
hydro/ylammonium chloride
ISO 1302:2002
Geometrical product specifications (GPS). !ndication of surface te/ture in technical product
documentation
ISO 1307:1996
#u$$er and plastics hoses for general-purpose industrial applications. Bore diameters and
tolerances% and tolerances on length
ISO 1361:1997
2ight-gauge metal containers. #ound open-top cans. !nternal diameters
ISO 1382:2002
#u$$er. 7oca$ulary
ISO 1401:2000
#u$$er hoses for agricultural spraying
ISO 1402:1997
#u$$er and plastics hoses and hose assem$lies. 1ydrostatic testing
ISO 1403:1997
#u$$er hoses% te/tile-reinforced% for general-purpose water applications. Specification
ISO 1421:1998
#u$$er-or plastics-coated fa$rics. Determination of tensile strength and elongation at $reak
ISO 1431-3:2000
#u$$er% vulcani.ed or thermoplastic. #esistance to o.one cracking. #eference and alternative
methods for determining the o.one concentration in la$oratory test cham$ers
ISO 1434:1995
?atural ru$$er in $ales. 3mount of $ale coating. Determination
ISO 1456:2003
0etallic coatings. <lectrodeposited coatings of nickel plus chromium and of copper plus nickel
plus chromium
ISO 1460:1995
0etallic coatings. 1ot dip galvani.ed coatings on ferrous materials. Gravimetric determination
of the mass per unit area
ISO 1461:1999
1ot dip galvani.ed coatings on fa$ricated iron and steel articles. Specifications and test methods
ISO 1463:1995
0etallic and o/ide coatings. 0easurement of coating thickness. 0icroscopical method
ISO 1478:2000
-apping screw thread
ISO 1479:1995
Specification for he/agon-head tapping screws
ISO 1481:1995
Specification for slotted pan-head tapping screws
ISO 1482:1995
Specification for slotted countersunk (flat) head tapping screws (common head style)
ISO 1483:1995
Slotted raised countersunk (oval) head tapping screws (common head style)
ISO 1496-2:1996
Series ) freight containers. Specification and testing. -hermal containers
ISO 1496-3:1995
Series ) freight containers. Specification and testing. -ank containers for li=uids% gases and
pressuri.ed dry $ulk
ISO 1496-4:1991
Series ) freight containers. Specification and testing. ?on-pressuri.ed containers for dry $ulk
ISO 1505:1993
-e/tile machinery. ;idths relating to dyeing and finishing machines. Definitions and range of
nominal widths
ISO 1513:1995
Paints and varnishes. </amination and preparation of samples for testing
ISO 1514:1997
Paints and varnishes. Standard panels for testing
ISO 1516:2002
0ethod of test for petroleum and its products. Determination of flashno flash. &losed cup
e=uili$rium method
ISO 1517:1995
Paints and varnishes. Surface-drying test. Ballotini method
ISO 1518:2001
Paints and varnishes. Scratch test
ISO 1519:2002
Paints and varnishes. Bend test (cylindrical mandrel)
ISO 1520:2001
Paints and varnishes. &upping test
ISO 1522:2001
Paints and varnishes. Pendulum damping test
ISO 1523:2002
0ethod of test for petroleum and its products. Determination of flash point. &losed cup
e=uili$rium method
ISO 1524:2002
Paints% varnishes and printing inks. Determination of fineness of grind
ISO 1530:2003
>ishing nets. Description and designation of knotted netting
ISO%IEC 1539-1:1997
!nformation technology. Programming languages. >"#-#3?. Base language
ISO%IEC 1539-2:2000
!nformation technology. Programming languages. >"#-#3?. 7arying length character strings
ISO%IEC 1539-3:1999
!nformation technology. Programming languages. >"#-#3?. &onditional compilation
ISO 1559:2001
Dental materials. 3lloys for dental amalgam
ISO 1561:1998
Dental casting wa/
ISO 1562:1995
Dental casting gold alloys
ISO 1564:1999
Dental a=ueous impression materials $ased on agar
ISO 1567:2001
Dentistry. Denture $ase polymers
ISO 1580:1994
Slotted pan head screws. Product grade 3
ISO 1597:2000
Plastics. Dnplastici.ed cellulose acetate. Determination of acetic acid yield
ISO 1598:2000
Plastics. &ellulose acetate. Determination of insolu$le particles
ISO 1599:1999
Plastics. &ellulose acetate. Determination of viscosity loss on moulding
ISO 1600:1999
Plastics. &ellulose acetate. Determination of light a$sorption of moulded specimens produced
using different periods of heating
ISO 1622-1:2000
Plastics. Polystrene (PS) moulding and e/trusion materials. Designation system and $asis for
specifications
ISO 1622-2:1999
Plastics. Polystrene (PS) moulding and e/trusion materials. Preparation of test specimens and
determination of properties
ISO 1624:2002
Plastics. 7inyl chloride homopolymer and copolymer resins. Sieve analysis in water
ISO 1628-1:1998
Plastics. Determination of the viscosity of polymers in dilute solution using capillary
viscometers. General principles
ISO 1628-2:2000
Plastics. Determination of the viscosity of polymers in dilute solution using capillary
viscometers. Poly(vinyl chloride) resins
ISO 1628-3:2000
Plastics. Determination of the viscosity of polymers in dilute solution using capillary
viscometers. Polyethylenes and polypropylenes
ISO 1628-5:1998
Plastics. Determination of the viscosity of polymers in dilute solution using capillary
viscometers. -hermoplastic polyester (-P) homopolymers and copolymers
ISO 1629:1995
#u$$ers and latices. ?omenclature
ISO 1641-1:2003
<nd mills and slot drills. 0illing cutters with cylindrical shanks
ISO 1641-3:2003
<nd mills and slot drills. 0illing cutters with :@C taper shanks
ISO 1660:1996
-echnical drawings. Dimensioning and tolerancing of profiles
ISO 1666:1998
Starch. Determination of moisture content. "ven-drying method
ISO 1675:1998
Plastics. 2i=uid resins. Determination of density $y the pyknometer method
ISO 1680:2000
3coustics. -est code for the measurement of air$orne noise emitted $y rotating electrical
machinery
ISO 1700:1988
&inematography. , mm type S motion-picture raw stock film. &utting and perforating
dimensions
ISO 1716:2002
#eaction to fire tests for $uilding products. Determination of the heat of com$ustion
ISO 1736:2000
Dried milk and dried milk products. Determination of fat content. Gravimetric method
(#eference method)
ISO 1737:2000
<vaporated milk and sweetened condensed milk. Determination of fat content. Gravimetric
method (#eference method)
ISO 1741:1995
De/trose. Determination of loss in mass on drying. 7acuum oven method
ISO 1746:2001
#u$$er or plastics hoses and tu$ing. Bending tests
ISO 1754:1998
Photography. &ameras using '( mm film and roll film. Picture si.es
ISO 1762:2001
Paper% $oard and pulps. Determination of residue (ash) on ignition at (@(BAD&
ISO 1766:1999
-e/tile floor coverings. Determination of thickness of pile a$ove the su$strate
ISO 1781:1983
&inematography. Pro+ector usage of , mm type S motion-picture film for direct front pro+ection
ISO 1785:1983
&inematography. Printed , mm% -ype S% image area on )* mm motion-picture film perforated ,
mm% -ype S ()-C). Position and dimensions
ISO 1787:1984
&inematography. &amera usage of , mm -ype S motion-picture film. Specifications
ISO 1795:2000
#u$$er% raw natural and raw synthetic. Sampling and further preparative procedures
ISO 1797-1:1995
Dental rotary instruments. Shanks. Shanks made of metals
ISO 1797-2:1995
Dental rotary instruments. Shanks. Shanks made of plastics
ISO 1798:2000
>le/i$le cellular polymeric materials. Determination of tensile strength and elongation at $reak
ISO 1803:1997
Building construction. -olerances. </pression of dimensional accuracy. Principles and
terminology
ISO 1806:2002
>ishing nets. Determination of mesh $reaking force of netting
ISO 1817:1999
#u$$er% vulcani.ed. Determination of the effect of li=uids
ISO 1834:1999
Short link chain for lifting purposes. General conditions of acceptance
ISO 1837:2003
2ifting hooks. ?omenclature
ISO 1854:2000
;hey cheese. Determination of fat content. Gravimetric method (reference method)
ISO 1856:2001
>le/i$le cellular polymeric materials. Determination of compression set
ISO%IEC 1863:1990
!nformation processing. E-track% )@%: mm (A%( in) wide magnetic tape for information
interchange using ?#4) at '@ ftpmm (,AA ftpi). '@ cpmm (,AA cpi)
ISO 1872-1:1999
Polyethylene (P<) moulding and e/trusion materials. Designation system and $asis for
specifications
ISO 1872-2:1997
Polyethylene (P<) moulding and e/trusion materials. Preparation of test specimens and
determination of properties
ISO 1873-1:1995
Plastics. Polypropylene (PP) moulding and e/trusion materials. Designation system and $asis for
specifications
ISO 1873-2:1997
Plastics. Polypropylene (PP) moulding and e/trusion materials. Preparation of test specimens
and determination of properties
ISO 1874-1:2001
Plastics. Polyamide (P3) moulding and e/trusion materials. Designation
ISO 1874-2:1996
Plastics. Polyamide (P3) moulding and e/trusion materials. Preparation of test specimens and
determination of properties
ISO 1886:1995
#einforcement fi$res. Sampling plans applica$le to received $atches
ISO 1887:1995
-e/tile glass. Determination of com$usti$le-matter content
ISO 1888:1996
-e/tile glass. Staple fi$res or filaments. Determination of average diameter
ISO 1889:1997
#einforcement yarns. Determination of linear density
ISO 1890:1997
#einforcement yarns. Determination of twist
ISO 1919:1998
#oad vehicles. 0)C / )%@( spark plugs with flat seating and their cylinder head housings
ISO 1922:2001
#igid cellular plastics. Determination of shear strength
ISO 1923:1995
&ellular plastics and ru$$ers. Determination of linear dimensions
ISO 1924-2:1995
Paper and $oard. Determination of tensile properties. &onstant rate of elongation method
ISO 1925:2001
0echanical vi$ration. Balancing. 7oca$ulary
ISO 1942-5:1995
Dental voca$ulary. -erms associated with testing
ISO 1957:2000
0achine-made te/tile floor coverings. Selection and cutting of specimens for physical tests
ISO 1973:1996
-e/tile fi$res. Determination of linear density. Gravimetric method and vi$roscope method
ISO 1977:2000
&onveyor chains% attachments and sprockets
ISO 1984-1:2001
-est conditions for manually controlled milling machines with ta$le of fi/ed height. -esting of
the accuracy. 0achines with hori.ontal spindle
ISO 1984-2:2001
-est conditions for manually controlled milling machines with ta$le of fi/ed height. -esting of
the accuracy. 0achines with vertical spindle
ISO 1985:1998
0achine tools. -est conditions for surface grinding machines with vertical grinding wheel
spindle and reciprocating ta$le. -esting of the accuracy
ISO 1986-1:2001
-est conditions for surface grinding machines with hori.ontal grinding wheel spindle and
reciprocating ta$le. -esting of the accuracy. 0achines with a ta$le length of up to )*AAmm
ISO%IEC 1989:2002
!nformation technology. Programming languages. &"B"2
ISO 1997:1992
Granulated cork and cork powder. &lassification% properties and packing
ISO 1998-1:1998
Petroleum industry. -erminology. #aw materials and products
ISO 1998-2:1998
Petroleum industry. -erminology. Properties and tests
ISO 1998-3:1998
Petroleum industry. -erminology. </ploration and production
ISO 1998-4:1998
Petroleum industry. -erminology. #efining
ISO 1998-5:1998
Petroleum industry. -erminology. -ransport% storage% distri$ution
ISO 1998-6:2000
Petroleum industry. -erminology. 0easurement
ISO 1998-7:1998
Petroleum industry. -erminology. 0iscellaneous terms
ISO 1998-99:2000
Petroleum industry. -erminology. General and inde/
ISO 2002 to ISO 2982
ISO 2009:1995
Slotted countersunk flat head screws (common head style). Product grade 3
ISO 2010:1995
&ountersunk slotted raised head screws (common head style). Product grade 3
ISO 2020-1:1997
3erospace. Preformed fle/i$le steel wire rope for aircraft controls. Dimensions and loads
ISO 2020-2:1997
3erospace. Preformed fle/i$le steel wire rope for aircraft controls. -echnical specification
ISO%IEC 2022:1994
!nformation technology. &haracter code structure and e/tension techni=ues
ISO 2028:1999
Synthetic ru$$er late/. Preparation of dry polymer
ISO 2039-1:2003
Plastics. Determination of hardness. Ball indentation method
ISO 2039-2:2000
Determination of #ockwell hardness. #ockwell hardness. #ockwell hardness
ISO 2060:1995
-e/tiles. Farn from packages. Determination of linear density (mass per unit length) $y the skein
method
ISO 2061:1996
-e/tiles. Determination of twist in yarns. Direct counting method
ISO 2062:1995
-e/tiles. Farns from packages. Determination of single-end $reaking force and elongation at
$reak
ISO 2064:2000
0etallic and other inorganic coatings. Definitions and conventions concerning the measurement
of thickness
ISO 2076:1999
-e/tiles. 0an-made fi$res. Generic names
ISO 2078:1995
-e/tile glass. Farns. Designation
ISO 2094:1999
-e/tile floor coverings. Determination of thickness loss under dynamic loading
ISO 2110:1989
!nformation technology. Data communication. @(-pole D-<D&< interface connector and
contact num$er assignments
ISO 2113:1996
#einforcement fi$res. ;oven fa$rics. Basis for a specification
ISO 2114:2000
Plastics (polyester resins) and paints and varnishes ($inders). Determination of partial acid value
and total acid value
ISO 2144:1997
Paper% $oard and pulps. Determination of residue (ash) on ignition at EAABAD&
ISO 2157:1995
Dental rotary instruments. ?ominal diameters and designation code num$er
ISO 2160:1998
Petroleum products. &orrosiveness to copper. &opper strip test
ISO 2162-1:1996
-echnical product documentation. Springs. Simplified representation
ISO 2162-2:1996
-echnical product documentation. Springs. Presentation of data for cylindrical helical
compression springs
ISO 2162-3:1996
-echnical product documentation. Springs. 7oca$ulary
ISO 2177:1995
0etallic coatings. 0easurement of coating thickness. &oulometric method $y anodic dissolution
ISO 2178:1995
?on-magnetic coatings on magnetic su$strates. 0easurement of coating thickness. 0agnetic
method
ISO 2187:1990
Spinning preparatory machinery% spinning and dou$ling (twisting) machinery. 2ist of e=uivalent
terms
ISO 2203:1997
-echnical drawing. &onventional representation of gears
ISO 2230:2002
#u$$er products. Guidelines for storage
ISO 2231:1995
#u$$er- or plastics-coated fa$rics. Standard atmospheres for conditioning and testing
ISO 2233:2001
Packaging. &omplete% filled transport packages and unit loads. &onditioning for testing
ISO 2234:2002
Packaging. &omplete% filled transport packages and unit loads. Stacking tests using a static load
ISO 2240:1994
Photography. &olour reversal camera films. Determination of !S" speed
ISO 2244:2002
Packaging. &omplete% filled transport packages and unit loads. 1ori.ontal impact tests
ISO 2247:2002
Packaging. &omplete% filled transport packages and unit loads. 7i$ration tests at fi/ed low
fre=uency
ISO 2261:1994
#eciprocating internal com$ustion engines. 1and-operated control devices. Standard direction of
motion
ISO 2285:2001
#u$$er% vulcani.ed or thermoplastic. Determination of tension set under constant elongation% and
of tension set% elongation and creep under constant tensile load
ISO 2286-1:1998
#u$$er- or plastics-coated fa$rics. Determination of roll characteristics. 0ethods for
determination of length% width and net mass
ISO 2286-2:1998
#u$$er- or plastics-coated fa$rics. Determination of roll characteristics. 0ethods for
determination of total mass per unit area% mass per unit area of coating and mass per unit area of
su$strate
ISO 2286-3:1998
#u$$er- or plastics-coated fa$rics. Determination of roll characteristics. 0ethod for
determination of thickness
ISO 2303:2003
!soprene ru$$er (!#). ?on-oil-e/tended% solution-polymeri.ed types. <valuation procedure
ISO 2320:1998
Prevailing tor=ue type steel he/agon nuts. 0echanical and performance re=uirements
ISO 2328:1993
>ork lift trucks. 1ook-on type fork arms and fork arm carriages. 0ounting dimensions
ISO 2330:2002
>ork-lift trucks. >ork arms. -echnical characteristics and testing
ISO 2338:1998
Parallel pins of unhardened steel and austenitic stainless steel
ISO 2344:1998
#oad vehicles. 0)C / )%@( spark plugs with conical seating and their cylinder head housings
ISO 2346:2001
#oad vehicles. 0)C / )%@( compact spark-plugs with flat seating and )E mm he/agon and their
cylinder head housing
ISO 2351-1:2002
3ssem$ly tools for screws and nuts. 0achine-operated screwdriver $its. Screwdriver $its for
slotted head screws
ISO 2351-2:2002
3ssem$ly tools for screws and nuts. 0achine-operated screwdriver $its. Screwdriver $its for
cross-recessed head screws
ISO 2351-3:2002
3ssem$ly tools for screws and nuts. 0achine-operated screwdriver $its. Screwdriver $its for
he/agon socket screws
ISO 2360:1995
?on-conductive coatings on non-magnetic $asis metals. 0easurement of coating thickness. <ddy
current method
ISO 2361:1995
<lectrodeposited nickel coatings on magnetic and non-magnetic su$strates. 0easurement of
coating thickness. 0agnetic method
ISO%IEC 2382-1:1993
!nformation technology. 7oca$ulary. >undamental terms
ISO 2382-2:1976
Data processing. 7oca$ulary. 3rithmetic and logic operations
ISO 2382-3:1987
!nformation processing systems. 7oca$ulary. <=uipment technology
ISO 2382-4:1987
!nformation processing systems. 7oca$ulary. "rgani.ation of data
ISO 2382-5:1989
!nformation processing systems. 7oca$ulary. #epresentation of data
ISO 2382-6:1987
!nformation processing systems. 7oca$ulary. Preparation and handling of data
ISO%IEC 2382-7:1989
!nformation technology. 7oca$ulary. &omputer programming
ISO 2382-8:1986
!nformation technology. 7oca$ulary. &ontrol% integrity and security
ISO 2382-10:1979
Data processing. 7oca$ulary. "perating techni=ues and facilities
ISO 2382-12:1988
!nformation processing systems. 7oca$ulary. Peripheral e=uipment
ISO 2382-13:1984
Data processing voca$ulary. &omputer graphics
ISO 2382-14:1978
!nformation technology. 7oca$ulary. #elia$ility% maintenance and availa$ility
ISO 2382-15:1985
Data processing. 7oca$ulary. Programming languages
ISO 2382-18:1987
!nformation processing systems. 7oca$ulary. Distri$uted data processing
ISO 2382-19:1989
!nformation processing systems. 7oca$ulary. 3nalog computing
ISO%IEC 2382-20:1990
!nformation technology. 7oca$ulary. System development
ISO 2382-21:1985
Data processing. 7oca$ulary. !nterfaces $etween process computer systems and technical
processes
ISO 2382-22:1986
!nformation processing systems. 7oca$ulary. &alculators
ISO%IEC 2382-23:1994
!nformation technology. 7oca$ulary. -e/t processing
ISO%IEC 2382-25:1992
!nformation technology. 7oca$ulary. 2ocal area networks
ISO%IEC 2382-26:1993
!nformation technology. 7oca$ulary. "pen systems interconnection
ISO%IEC 2382-27:1994
!nformation technology. 7oca$ulary. "ffice automation
ISO 2385:1993
&orkwood in planks% virgin cork% cleanings% cork pieces% corkwood refuse and corkwaste.
Sampling to determine moisture content
ISO 2398:1997
#u$$er hose% te/tile-reinforced% for compressed air. Specification
ISO 2407:1997
-est conditions for internal cylindrical grinding machines with hori.ontal spindle. -esting of
accuracy
ISO 2409:1995
Paints and varnishes. &ross-cut test
ISO 2411:2000
#u$$er or plastics-coated fa$rics. Determination of coating adhesion
ISO 2417:2002
2eather. Physical and mechanical tests. Determination of the static a$sorption of water
ISO 2418:2002
2eather. &hemical% physical and mechanical and fastness tests. Sampling location
ISO 2419:2002
2eather. Physical and mechanical tests. Sample preparation and conditioning
ISO 2420:2002
2eather. Physical and mechanical tests. Determination of apparent density
ISO 2421:2003
&oated a$rasives. &ylindrical sleeves
ISO 2431:1996
Paints and varnishes. Determination of flow time $y use of flow cups
ISO 2439:2001
>le/i$le cellular polymeric materials. Determination of hardness (indentation techni=ue)
ISO 2440:2000
>le/i$le and rigid cellular polymeric materials. 3ccelerated ageing tests
ISO 2450:1999
&ream. Determination of fat content (#eference method)
ISO 2470:1999
Paper% $oard and pulps. 0easurement of diffuse $lue reflectance factor (!S" $rightness)
ISO 2471:1998
Paper and $oard. Determination of opacity (paper $acking). Diffuse reflectance method
ISO 2475:1999
&hloroprene ru$$er (&#). General-purpose types. <valuation procedure
ISO 2495:2001
Specification for iron $lue pigments
ISO 2503:1998
Gas welding e=uipment. Pressure regulators for gas cylinders used in welding% cutting and allied
processes up to 'AA $ar
ISO 2534:1998
#oad vehicles. <ngine test code. Gross power
ISO 2535:2002
Plastics. Dnsaturated polyester resins. 0easurement of gel time at am$ient temperature
ISO 2554:1999
Plastics. Dnsaturated polyester resins. Determination of hydro/yl value
ISO 2555:2000
Plastics. #esins in the li=uid state or as emulsions or dispersions. Determination of apparent
viscosity $y the Brookfield -est method
ISO 2556:2001
Plastics. Determination of the gas transmission rate of films and thin sheets under atmospheric
pressure. 0anometric method
ISO 2559:2000
-e/tile glass. 0ats (made from chopped or continuous strands). Designation and $asis for
specifications
ISO 2566-1:1999
Steel. &onversion of elongation values. &ar$on and low alloy steels
ISO 2566-2:2001
Steel. &onversion of elongation values. 3ustenitic steels
ISO 2578:1999
Plastics. Determination of the time-temperature limits after prolonged e/posure to heat
ISO 2580-1:2002
Plastics. 3crylonitrile$utadienestyrene (3BS) moulding and e/trusion materials. Designation
system and $asis for specifications
ISO 2580-2:2000
Plastics. 3crylonitrile$utadienestyrene (3BS) moulding and e/trusion materials. Preparation of
test specimens and determination of properties
ISO 2589:2002
2eather. Physical and mechanical tests. Determination of thickness
ISO 2592:2001
Determination of flash and fire points. &leveland open cup method
ISO 2596:1994
!ron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric and Garl
>ischer methods
ISO 2597-1:1994
!ron ores.Determination of total iron content. -itrimetric method after tin (!!) chloride reduction
ISO 2599:2003
!ron ores. Determination of phosphorus content. -itrimetric method
ISO 2624:1995
&opper and copper alloys. <stimation of average grain si.e
ISO 2626:1995
&opper. 1ydrogen em$rittlement test
ISO 2631-4:2001
0echanical vi$ration and shock. <valuation of human e/posure to whole-$ody vi$ration.
Guidelines for the evaluation of the effects of vi$ration and rotational motion on passengers and
crew comfort in fi/ed-guideway transport systems
ISO 2639:2002
Steels. Determination and verification of the depth of car$uri.ed and hardened cases
ISO 2692:1988
-echnical drawings. Geometrical tolerancing. 0a/imum material principle
ISO 2697:1999
Diesel engines. >uel no..les. Si.e HSH
ISO 2702:1995
1eat-treated steel tapping screws. 0echanical properties
ISO 2704:1998
#oad vehicles. 0)A / ) spark plugs with flat seating and their cylinder head housings
ISO 2705:1999
#oad vehicles. 0)@ / )%@( spark plugs with flat seating and their cylinder head housings
ISO 2709:1996
!nformation and documentation. >ormat for information interchange
ISO 2710-1:2000
#eciprocating internal com$ustion engines. 7oca$ulary. -erms for engine design and operation
ISO 2710-2:1999
#eciprocating internal com$ustion engines. 7oca$ulary. -erms for engine maintenance
ISO 2725-3:2001
3ssem$ly tools for screws and nuts. S=uare drive sockets. 0achine-operated sockets (Hnon-
impactH). Dimensions
ISO 2738:2000
Sintered metal materials% e/cluding hardmetals. Permea$le sintered metal materials.
Determination of density% oil content and open porosity
ISO 2739:1998
Sintered metal $ushes. Determination of radial crushing strength
ISO 2740:2000
Sintered metal materials% e/cluding hardmetals. -ensile test pieces
ISO 2758:2001
Paper. Determination of $ursting strength
ISO 2759:2001
Board. Determination of $ursting strength
ISO 2789:2003
!nformation and documentation. !nternational li$rary statistics
ISO 2804:1996
;ire% $ar or tu$e drawing dies. 3s-sintered pellets of hardmetal (car$ide). Dimensions
ISO 2806:1997
!ndustrial automation systems. ?umerical control of machines. 7oca$ulary
ISO 2808:2001
Paints and varnishes. Determination of film thickness
ISO 2811-1:2001
Paints and varnishes. Determination of density. Pyknometer method
ISO 2811-2:2001
Paints and varnishes. Determination of density. !mmersed $ody (plummet) method
ISO 2811-3:2001
Paints and varnishes. Determination of density. "scillation method
ISO 2811-4:2001
Paints and varnishes. Determination of density. Pressure cup method
ISO 2812-1:1995
Paints and varnishes. Determination of resistance to li=uids. General methods
ISO 2812-2:1995
Paints and varnishes. Determination of resistance to li=uids. ;ater immersion method
ISO 2813:2000
Paints and varnishes. 0easurement of specular gloss of non-metallic paint films at @ABAD%
*ABAD and ,(BAD
ISO 2815:2003
Paints and varnishes. Buchhol. indentation test
ISO 2818:1997
Plastics. Preparation of test specimens $y machining
ISO 2819:1995
0etallic coatings on metallic su$strates. <lectrodeposited and chemically deposited coatings.
#eview of methods availa$le for testing adhesion
ISO 2827:1988
Photography. <lectronic flash e=uipment. Determination of light output and performance
ISO 2834:1999
Graphic technology. -est print preparation for offset and letterpress inks
ISO 2836:1999
Graphic technology. Prints and printing inks. 3ssessment of resistance to various agents
ISO 2837:1996
Graphic technology. Prints and printing inks. 3ssessment of resistance to solvents
ISO 2846-1:1997
Graphic technology. &olour and transparency of ink sets for four-colour-printing. Sheet-fed and
heat-set we$ offset lithographic printing
ISO 2846-2:2000
Graphic technology. &olour and transparency of ink sets for four-colour-printing. &oldset offset
lithographic printing
ISO 2846-4:2000
Graphic technology. &olour and transparency of ink sets for four-colour-printing. Screen printing
ISO 2860:2001
<arth-moving machinery. 0inimum access dimensions
ISO 2867:1999
<arth-moving machinery. 3ccess systems
ISO 2870:1994
Surface active agents. Detergents. Determination of anionic-active matter hydroly.a$le and non-
hydroly.a$le under acid conditions
ISO 2871-1:1994
1igh molecular mass cationic-active matter
ISO 2871-2:1994
Surface active agents. Detergents. Determination of cationic-active matter content. &ationic-
active matter of low molecular mass ($etween @AA and (AA)
ISO 2873:2002
Packaging. &omplete% filled transport packages and unit loads. 2ow pressure test
ISO 2875:2002
Packaging. &omplete% filled transport packages and unit loads. ;ater-spray test
ISO 2897-1:1999
Plastics. !mpact-resistant polystyrene (PS-!) moulding and e/trusion materials. Designation
system and $asis for specifications
ISO 2897-2:1999
Plastics. !mpact-resistant polystyrene (PS-!) moulding and e/trusion materials. Preparation of
test specimens and determination of properties
ISO 2898-1:2000
Plastics. Plastici.ed poly (vinyl chloride) (P7&-P) moulding and e/trusion materials.
Designation system and $asis for specifications
ISO 2898-2:2000
Plastics. Plastici.ed poly (vinyl chloride) (P7&-P) moulding and e/trusion materials. Preparation
of test specimens and determination of properties
ISO 2906:2002
&inematography. !mage area produced $y camera aperture on '(mm motion picture film.
Position and dimensions
ISO 2907:2002
&inematography. 0a/imum pro+ecta$le image area on '( mm motion-picture film. Position and
dimensions
ISO 2909:2002
0ethods of test for petroleum and its products. Petroleum products. &alculation of viscosity
inde/ from kinematic viscosity
ISO 2922:2001
3coustics. 0easurement of air$orne sound emitted $y vessels on inland waterways and har$ours
ISO 2929:2002
#u$$er hoses and hose assem$lies for $ulk fuel delivery $y truck. Specification
ISO 2936:1995
3ssem$ly tools for screws and nuts. 1e/agon socket screw keys
ISO 2939:2002
&inematography. Picture image area on '( mm motion-picture release prints. Position and
dimensions
ISO 2941:1974
1ydraulic fluid power. >ilter elements. 7erification of collapse$urst resistance
ISO 2942:1994
1ydraulic fluid power. >ilter elements. 7erification of fa$rication integrity and determination of
the first $u$$le point
ISO 2943:1998
1ydraulic fluid power. >ilter elements. 7erification of material compati$ility with fluids
ISO 2944:2000
>luid power systems and components. ?ominal pressures
ISO 2953:1999
0echanical vi$ration. Balancing machines. Description and evaluation
ISO 2966:1988
&inematography. )* mm motion-picture film perforated , mm type S I)-'J and I)-CJ. &utting
and perforating dimensions
ISO 2967:1982
&inematography. 0agnetic stripes for sound records on '( mm motion-picture film perforated ,
mm -ype S-(# ()-'-(-:-A). Positions and width dimensions
ISO 2982-1:1995
#olling $earings. 3ccessories. -apered sleeves. Dimensions
ISO 2982-2:2001
#olling $earings. 3ccessories. 2ocknuts and locking devices. Dimensions
ISO 3001 to ISO 3994
ISO 3001:1999
Plastics. <po/y compounds. Determination of epo/y e=uivalent
ISO 3007:1999
0ethods of test for petroleum and its products. @AAA-*E. Petroleum products. Determination of
vapour pressure. #eid method
ISO 3011:1997
#u$$er- or plastics-coated fa$rics. Determination of resistance to o.one cracking under static
conditions
ISO 3019-1:2001
1ydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends
of displacement pumps and motors. !nch series shown in metric units
ISO 3019-2:2001
1ydraulic fluid power. Dimensions and identification code for mounting flanges and shaft ends
of displacement pumps and motors. 0etric series
ISO 3022:1988
&inematography. '( mm motion-picture film perforated )* mm ()-'-A). &utting and perforating
dimensions
ISO 3023:1995
&inematography. *( mm and :A mm une/posed motion-picture film. &utting and perforating
dimensions
ISO 3026:1992
&inematography. Printed , mm -ype S image area on '( mm motion-picture film perforated ,
mm -ype S% @#-C.@@: ()**C) or (#-C.@'C ()**:). Position and dimensions
ISO 3027:1984
&inematography. 0agnetic stripes and recording head gaps for sound record on , mm -ype S
motion-picture films. Position and width dimensions
ISO 3029:1995
Photography. )@* si.e cartridges. Dimensions of cartridge% film and $acking paper
ISO 3030:1996
#olling $earings. #adial needle roller and cage assem$lies. Dimensions and tolerances
ISO 3031:2000
#olling $earings. -hrust needle roller and cage assem$lies% thrust washers. Boundary dimensions
and tolerances
ISO 3037:1996
&orrugated fi$re$oard. Determination of edgewise crush resistance (unwa/ed edge method)
ISO 3040:1990
-echnical drawings. Dimensioning and tolerancing. &ones
ISO 3046-1:2002
#eciprocating internal com$ustion engines. Performance. Declarations of power% fuel and
lu$ricating oil consumptions% and test methods. 3dditional re=uirements for engines for general
use
ISO 3046-5:2001
#eciprocating internal com$ustion engines. Performance. -orsional vi$rations
ISO 3057:1998
?on-destructive testing. 0etallographic replica techni=ues of surface e/amination
ISO 3058:1998
?on-destructive testing. 3ids to visual inspection. Selection of low-power magnifiers
ISO 3059:2001
?on-destructive testing. Penetrant testing and magnetic particle testing. 7iewing conditions
ISO 3068:1982
&inematography. 0agnetic stripes for sound records on )* mm motion-picture film perforated ,
mm -ype S-@# ()-C) and ()-'). Positions and width dimensions
ISO 3069:2000
<nd-suction centrifugal pumps. Dimensions of cavities for mechanical seals and for soft packing
ISO 3070-2:1997
-est conditions for $oring and milling machines with hori.ontal spindle. -esting of the accuracy.
-a$le-type machines
ISO 3070-3:1997
-est conditions for $oring and milling machines with hori.ontal spindle. -esting of the accuracy.
>loor type machines with detached% stationary work-holding ta$le
ISO 3070-4:1998
-est conditions for $oring and milling machines with hori.ontal spindle. -esting of the accuracy.
Planer type machines with mova$le column
ISO 3085:2002
!ron ores. </perimental methods for checking the precision of sampling% sample preparation and
measurement
ISO 3086:1998
!ron ores. </perimental methods for checking the $ias of sampling
ISO 3087:1998
!ron ores. Determination of the moisture content of a lot
ISO 3096:1996
#olling $earings. ?eedle rollers. Dimensions and tolerances
ISO 3098-0:1998
-echnical product documentation. 2ettering. General re=uirements
ISO 3098-2:2000
-echnical product documentation. 2ettering. 2atin alpha$et% numerals and marks
ISO 3098-3:2000
-echnical product documentation. 2ettering. Greek alpha$et
ISO 3098-4:2000
-echnical product documentation. 2ettering. Diacritical and particular marks for the 2atin
alpha$et
ISO 3098-5:1998
-echnical product documentation. 2ettering. &3D lettering of the 2atin alpha$et% numerals and
marks
ISO 3098-6:2000
-echnical product documentation. 2ettering. &yrillic alpha$et
ISO 3104:1996
0ethods of test for petroleum and its products. Petroleum products. -ransparent and opa=ue
li=uids. Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 3116:2001
0agnesium and magnesium alloys. ;rought magnesium alloys
ISO 3146:2000
Plastics. Determination of melting $ehaviour (melting temperature or melting range) of semi-
crystalline polymers $y capillary tu$e and polari.ing-microscope methods
ISO 3160-1:1998
;atch-cases and accessories. Gold alloy coverings. General re=uirements
ISO 3160-2:2003
;atch-cases and accessories. Gold alloy coverings. Determination of fineness% thickness%
corrosion resistance and adhesion
ISO 3164:2000
<arth-moving machinery. 2a$oratory evaluations of protective structures. Specifications for
deflection-limiting volume
ISO 3166-1:1998
&odes for the representation of names of countries and their su$divisions. &ountry codes
ISO 3166-2:1998
&odes for the representation of names of countries and their su$divisions. &ountry su$division
code
ISO 3166-3:1999
&odes for the representation of names of countries and their su$divisions. &ode for formerly
used names of countries
ISO 3167:2003
Plastics. 0ultipurpose test specimens
ISO 3170:1999
Petroleum li=uids. 0anual sampling
ISO 3171:1999
Petroleum li=uids. 3utomatic pipeline sampling
ISO 3175-1:1998
-e/tiles. Dry cleaning and finishing. 0ethod for assessing the cleana$ility of te/tiles and
garments
ISO 3175-2:1998
-e/tiles. Dry cleaning and finishing. Procedures for tetrachloroethene
ISO 3183-3:1999
Petroleum and natural gas industries. Steel pipe for pipelines. -echnical delivery conditions.
Pipes of re=uirement class &
ISO 3188:1994
Starches and derived products. Determination of nitrogen content $y the G+eldahl method.
-itrimetric method
ISO 3218:1976
<ssential oils. Principles of nomenclature
ISO 3219:1995
Plastics. Polymersresins in the li=uid state or as emulsions or dispersions. Determination of
viscosity using a rotational viscometer with defined shear rate
ISO 3231:1998
Paints and varnishes. Determination of resistance to humid atmospheres containing sulfur
dio/ide
ISO 3245:1997
#olling $earings. ?eedle roller $earings% drawn cup without inner rings. Boundary dimensions
and tolerances
ISO 3248:2001
Paints and varnishes. Determination of the effect of heat
ISO 3251:2003
Paints% varnishes and plastics. Determination of non-volatile-matter content
ISO 3252:2000
Powder metallurgy. 7oca$ulary
ISO 3262-1:1998
</tenders for paints. Specifications and methods of test. !ntroduction and general test methods
ISO 3262-2:1998
</tenders for paints. Specifications and methods of test. Barytes (natural $arium sulfate)
ISO 3262-3:1998
</tenders for paints. Specifications and methods of test. Blanc fi/e
ISO 3262-4:1998
</tenders for paints. Specifications and methods of test. ;hiting
ISO 3262-5:1998
</tenders for paints. Specifications and methods of test. ?atural crystalline calcium car$onate
ISO 3262-6:1998
</tenders for paints. Specifications and methods of test. Precipitated calcium car$onate
ISO 3262-7:1998
</tenders for paints. Specifications and methods of test. Dolomite
ISO 3262-8:2000
</tenders for paints. Specifications and methods of test. ?atural clay
ISO 3262-9:1998
</tenders for paints. Specifications and methods of test. &alcined clay
ISO 3262-10:2000
</tenders for paints. Specifications and methods of test. ?atural talcchlorite in lamellar form
ISO 3262-11:2000
</tenders for paints. Specifications and methods of test. ?atural talc% in lamellar form%
containing car$onates
ISO 3262-12:2001
</tenders for paints. Specifications and methods of test. 0uscovite-type mica
ISO 3262-13:1998
</tenders for paints. Specifications and methods of test. ?atural =uart. (ground)
ISO 3262-14:2000
</tenders for paints. Specifications and methods of test. &risto$alite
ISO 3262-15:2000
</tenders for paints. Specifications and methods of test. 7itreous silica
ISO 3262-16:2000
</tenders for paints. Specifications and methods of test. 3luminium hydro/ides
ISO 3262-17:2000
</tenders for paints. Specifications and methods of test. Precipitated calcium silicate
ISO 3262-18:2000
</tenders for paints. Specifications and methods of test. Precipitated sodium aluminium silicate
ISO 3262-19:2000
</tenders for paints. Specifications and methods of test. Precipitated silica
ISO 3262-20:2000
</tenders for paints. Specifications and methods of test. >umed silica
ISO 3262-21:2000
</tenders for paints. Specifications and methods of test. Silica sand (unground natural =uart.)
ISO 3262-22:2001
</tenders for paints. Specifications and methods of test. >lu/-calcined kieselguhr
ISO 3269:2001
>asteners. 3cceptance inspection
ISO 3271:1995
!ron ores. Determination of tum$le strength
ISO 3272-1:2003
0icrofilming of technical drawings and other drawing office documents. "perating procedures
ISO 3272-2:1994
0icrofilming of technical drawings and other drawing office documents. 9uality criteria and
control of '( mm silver gelatin microfilms
ISO 3272-3:2001
0icrofilming of technical drawings and other drawing office documents. 3perture card for '(
mm microfilm
ISO 3272-4:1994
0icrofilming of technical drawings and other drawing office documents. 0icrofilming of
drawings of special and e/ceptional elongated si.es
ISO 3272-5:1999
0icrofilming of technical drawings and other drawing office documents. -est procedures for
dia.o duplicating of microfilm images in aperture cards
ISO 3272-6:2000
0icrofilming of technical drawings and other drawing office documents. 9uality criteria and
control of systems for enlargement from '(mm microfilm
ISO 3274:1998
Geometric product specifications (GPS). Surface te/ture. Profile method. ?ominal
characteristics of contact (stylus) instruments
ISO 3287:1999
Powered industrial trucks. Sym$ols for operator controls and other displays
ISO 3290:2001
#olling $earings. Balls. Dimensions and tolerances
ISO 3298:1994
Photography. Processing chemicals. Specifications for glacial acetic acid
ISO 3299:1994
Photography. Processing chemicals. Specifications for )-phenyl-'-pyra.olidinone
ISO &' 3313:1998
0easurement of fluid flow in closed conduits. Guidelines on the effects of flow pulsations on
flow-measurement instruments
ISO 3322:1985
>luid power systems and components. &ylinders. ?ominal pressures
ISO 3325:1999
Sintered metal materials% e/cluding hardmetals. Determination of transverse rupture strength
ISO 3336:1996
Dentistry. Synthetic polymer teeth
ISO 3338-1:1996
&ylindrical shanks for milling cutters. Dimensional characteristics of plain cylindrical shanks
ISO 3338-2:1996
&ylindrical shanks for milling cutters. Dimensional characteristics of flatted cylindrical shanks
ISO 3341:2000
-e/tile glass. Farns. Determination of $reaking force and $reaking elongation
ISO 3342:1995
-e/tile glass. 0ats. Determination of tensile $reaking force
ISO 3344:1997
#einforcement products. Determination of moisture content
ISO 3366:1999
&oated a$rasives. 3$rasive rolls
ISO 3374:2000
#einforcement products. 0ats and fa$rics. Determination of mass per unit area
ISO 3376:2002
2eather. Physical and mechanical tests. Determination of tensile strength and percentage
e/tension
ISO 3377-1:2002
2eather. Physical and mechanical tests. Determination of tear load. Single edge tear
ISO 3377-2:2002
2eather. Physical and mechanical tests. Determination of tear load. Dou$le edge tear
ISO 3378:2002
2eather. Physical and mechanical tests. Determination of resistance to grain cracking and grain
crack inde/
ISO 3380:2002
2eather. Physical and mechanical tests. Determination of shrinkage temperature up to )AA
degrees &
ISO 3382:2000
3coustics. 0easurement of the rever$eration time of rooms with reference to other acoustical
parameters
ISO 3384:1999
#u$$er% vulcani.ed or thermoplastic. Determination of stress rela/ation in compression at
am$ient and at elevated temperatures
ISO 3385:1995
>le/i$le cellular polymeric materials. Determination of fatigue $y constant-load pounding
ISO 3386-1:1998
Polymeric materials% cellular fle/i$le. Determination of stress-strain characteristic in
compression. 2ow-density materials
ISO 3386-2:1998
Polymeric materials% cellular fle/i$le. Determination of stress-strain characteristic in
compression. 1igh-density materials
ISO 3405:2000
0ethods of test for petroleum and its products. Petroleum products. Determination of distillation
characteristics at atmospheric pressure
ISO 3411:2000
<arth-moving machinery. 1uman physical dimensions of operators and minimum operator space
envelope
ISO 3450:1996
Safety of earth-moving machinery. Specification for $raking systems and performance
re=uirements and test procedures for ru$$er-tyred machines
ISO 3451-1:1997
Plastics. Determination of ash. General methods
ISO 3451-4:2000
Plastics. Determination of ash. Polyamides
ISO 3451-5:2002
Plastics. Determination of ash. Poly(vinyl chloride)
ISO 3452-2:2000
?on-destructive testing. Penetrant testing. -esting of penetrant materials
ISO 3452-3:1999
?on-destructive testing. Penetrant testing. #eference test $locks
ISO 3452-4:1999
?on-destructive testing. Penetrant testing. <=uipment
ISO 3457:1995
<arth-moving machinery. Guards and shields. Definitions and specifications
ISO 3497:2001
0etallic coatings. 0easurement of coating thickness. 8-ray spectrometric methods
ISO 3506-1:1998
0echanical properties of corrosion-resistant stainless-steel fasteners. Bolts% screws and studs
ISO 3506-2:1998
0echanical properties of corrosion-resistant stainless-steel fasteners. ?uts
ISO 3506-3:1998
0echanical properties of corrosion-resistant stainless-steel fasteners. Set screws and similar
fasteners not under tensile stress
ISO 3506-4:2003
0echanical properties of corrosion-resistant stainless-steel fasteners. -apping screws
ISO 3507:1999
2a$oratory glassware. Pyknometers
ISO 3521:2000
Plastics. Dnsaturated polyester and epo/y resins. Determination of overall volume shrinkage
ISO 3534-1:1993
Statistics. 7oca$ulary and sym$ols. Pro$a$ility and general statistical terms
ISO 3534-2:1993
Statistics. 7oca$ulary and sym$ols. Statistical =uality control
ISO 3534-3:1999
Statistics. 7oca$ulary and sym$ols. Design of e/periments
ISO 3543:2001
0etallic and non-metallic coatings. 0easurement of thickness. Beta $ackscatter method
ISO 3547-1:1999
Plain $earings. ;rapped $ushes. Dimensions
ISO 3547-2:1999
Plain $earings. ;rapped $ushes. -est data for outside and inside diameter
ISO 3547-3:1999
Plain $earings. ;rapped $ushes. 2u$rication holes% lu$rication grooves and lu$rication
indentations
ISO 3547-4:1999
Plain $earings. ;rapped $ushes. 0aterials
ISO 3548:1999
Plain $earings. -hin-walled half $earings with or without flange. -olerances% design features and
methods of test
ISO 3549:2002
4inc dust pigments for paints. Specifications and test methods
ISO 3553-2:1997
#oad vehicles. 1igh tension connectors for ignition coils and distri$utors. Plug types
ISO 3582:2001
>le/i$le cellular polymeric materials. 2a$oratory assessment of hori.ontal $urning
characteristics of small specimens su$+ected to a small flame
ISO 3585:1998
Borosilicate glass '.'. Properties
ISO 3593:1994
Starch. Determination of ash
ISO 3596:2001
3nimal and vegeta$le fats and oils. Determination of unsaponifia$le matter. 0ethod using
diethyl ether e/traction
ISO 3613:2001
&hromate conversion coatings on .inc% cadmium% aluminium-.inc alloys and .inc-aluminium
alloys. -est methods
ISO 3616:2001
-e/tile glass. &hopped-strand and continuous-filament mats. Determination of average
thickness% thickness under load and recovery after compression
ISO 3617:1994
Photography. Processing chemicals. Specifications for sodium hydro/ide
ISO 3618:1994
Photography. Processing chemicals. Specifications for $en.otria.ole
ISO 3619:1994
Photography. Processing chemicals. Specification for ammonium thiosulfate solution
ISO 3620:1994
Photography. Processing chemicals. Specifications for aluminium potassium sulfate
ISO 3621:1994
Photography. Processing chemicals. Specifications for sodium tetra$orate decahydrate
ISO 3622:1996
Photography. Processing chemicals. Specifications for ammonium thiocyanate
ISO 3623:1994
Photography. Processing chemicals. Specifications for anhydrous potassium car$onate
ISO 3624:1994
Photography. Processing chemicals. Specifications for potassium ferricyanide
ISO 3625:1994
Photography. Processing chemicals. Specifications for potassium hydro/ide
ISO 3626:1996
Photography. Processing chemicals. Specification for potassium thiocyanate
ISO 3627:2001
Photography. Processing chemicals. Specifications for anhydrous sodium meta$isulfite
ISO 3628:1994
Photography. Processing chemicals. Specifications for $oric acid% granular
ISO 3629:2000
Photography. Processing chemicals. Specifications for potassium meta$isulfite
ISO 3630-1:1995
Dental root-canal instruments. >iles% reamers% $ar$ed $roaches% rasps% paste carriers% e/plorers
and cotton $roaches
ISO 3630-2:2001
Dental root-canal instruments. <nlargers
ISO 3630-3:1997
Dental root-canal instruments. &ondensers% pluggers and spreaders
ISO 3639:1981
&inematography. Pro+ection reelsspools :( to ')@ mm diameter for , mm -ype S motion-
picture film. Dimensions and specifications
ISO 3645:1984
&inematography. !mage area produced $y , mm -ype S motion-picture camera aperture and
ma/imum pro+ecta$le image area. Positions and dimensions
ISO 3650:1999
Geometrical product specifications (GPS). 2ength standards. Gauge $locks
ISO 3651-1:1998
Determination of resistance to intergranular corrosion of stainless steels. 3ustenitic and ferritic-
austenitic (duple/) stainless steels. &orrosion test in nitric acid medium $y measurement of loss
in mass (1uey test)
ISO 3651-2:1998
Determination of resistance to intergranular corrosion of stainless steels. >erritic% austenitic and
ferritic-austenitic (duple/) stainless steels. &orrosion test in media containing sulfuric acid
ISO 3656:2002
3nimal and vegeta$le fats and oils. Determination of ultraviolet a$sor$ance e/pressed as specific
D7 e/tinction
ISO 3657:2002
3nimal and vegeta$le fats and oils. Determination of saponification value
ISO 3664:2000
7iewing conditions for graphic technology and photography
ISO 3665:1996
Photography. !ntra-oral dental radiographic film. Specification
ISO%&' 3666:1998
7iscosity of water
ISO 3668:2001
Paints and varnishes. 7isual comparison of the colour of paints
ISO 3671:1999
Plastics. 3minoplastic moulding materials. Determination of volatile matter
ISO 3672-1:2001
Plastics. Dnsaturated-polyester resins (DP-#). Designation system
ISO 3672-2:2001
Plastics. Dnsaturated-polyester resins (DP-#). Preparation of test specimens and determination of
properties
ISO 3673-1:2000
Plastics. <po/y resins. Designation
ISO 3673-2:2000
Plastics. <po/y resins. Preparation of test specimens and determination of properties
ISO 3675:1998
&rude petroleum and li=uid petroleum products. 2a$oratory determination of density.
1ydrometer method
ISO 3677:1995
>iller metal for soft soldering% $ra.ing and $ra.e welding. Designation
ISO 3678:1995
Paints and varnishes. Print-free test
ISO 3681:1998
Binders for paints and varnishes. Determination of saponification value. -itrimetric method
ISO 3682:1998
Binders for paints and varnishes. Determination of acid value. -itrimetric method
ISO 3686-1:2000
-est conditions for high accuracy turret and single spindle coordinate drilling and $oring
machines with ta$le of fi/ed height with vertical spindle. -esting of the accuracy. Single column
type machines
ISO 3686-2:2000
-est conditions for high accuracy turret and single spindle coordinate drilling and $oring
machines with ta$le of fi/ed height with vertical spindle. -esting of the accuracy. Portal type
machines with moving ta$le
ISO 3688:1999
Pulps. Preparation of la$oratory sheets for the measurement of diffuse $lue reflectance factor
(!S" $rightness)
ISO 3690:2001
;elding and allied processes. Determination of hydrogen content in ferritic steel arc weld metal
ISO 3696:1995
;ater for analytical la$oratory use. Specification and test methods
ISO 3715-2:2001
Ships and marine technology. Propulsion plants for ships. 7oca$ulary for controlla$le-pitch
propeller plants
ISO 3723:1976
1ydraulic fluid power. >ilter elements. 0ethod for end load test
ISO 3724:1976
1ydraulic fluid power. >ilter elements. 7erification of flow fatigue characteristics
ISO 3727-1:2002
Butter. Determination of moisture% non-fat solids and fat contents. Determination of moisture
content (#eference method)
ISO 3727-2:2002
Butter. Determination of moisture% non-fat solids and fat contents. Determination of non-fat
solids content (#eference method)
ISO 3727-3:2003
Butter. Determination of moisture% non-fat solids and fat contents. &alculation of fat content
ISO 3735:1999
&rude petroleum and fuel oils. Determination of sediment. </traction method
ISO 3740:2001
3coustics. Determination of sound power levels of noise sources. Guidelines for the use of $asic
standards
ISO 3741:2000
3coustics. Determination of sound power levels of noise sources using sound pressure. Precision
methods for rever$eration rooms
ISO 3743-1:1995
3coustics. Determination of sound power levels of noise sources. <ngineering methods for
small% mova$le sources in rever$erant fields. &omparison for hard-walled test rooms
ISO 3743-2:1997
3coustics. Determination of sound power levels of noise sources. <ngineering methods for
small% mova$le sources in rever$erant fields. 0ethods for special rever$eration test rooms
ISO 3744:1995
3coustics. Determination of sound power levels of noise sources using sound pressure.
<ngineering method in an essentially free field over a reflecting plane
ISO 3746:1996
3coustics. Determination of sound power levels of noise sources using sound pressure. Survey
method using an enveloping measurement surface over a reflecting plane
ISO 3747:2000
3coustics. Determination of sound power levels of noise sources using sound pressure.
&omparison method in situ
ISO 3759:1995
-e/tiles. Preparation% marking and measuring of fa$ric specimens and garments in tests for
determination of dimensional change
ISO 3764:2000
-imekeeping instruments. 0ovements. >orms% dimensions and nomenclature
ISO 3766:1999
&onstruction drawings. Simplified representation of concrete reinforcement
ISO 3767-1:2000
-ractors% machinery for agriculture and forestry% powered lawn and garden e=uipment. Sym$ols
for operator controls and other displays. &ommon sym$ols (review)
ISO 3767-2:1996
-ractors% machinery for agriculture and forestry% powered lawn and garden e=uipment. Sym$ols
for operator controls and other displays. Sym$ols for agricultural tractors and machinery
ISO 3767-3:1996
-ractors% machinery for agriculture and forestry% powered lawn and garden e=uipment. Sym$ols
for operator controls and other displays. Sym$ols for powered lawn and garden e=uipment
ISO 3767-4:1996
-ractors% machinery for agriculture and forestry% powered lawn and garden e=uipment. Sym$ols
for operator controls and other displays. Sym$ols for forestry machinery
ISO 3767-5:1992
-ractors% machinery for agriculture and forestry% powered lawn and garden e=uipment. Sym$ols
for operator controls and other displays. Sym$ols for manual porta$le forestry machinery
ISO 3772:2000
Photography. #olls of sensiti.ed material for the pre-press industry. Dimensions and related
re=uirements
ISO 3773:1983
&inematography. -ape splices for , mm -ype S motion-picture film for pro+ector use.
Dimensions
ISO 3774:1988
&inematography. '( mm motion-picture film perforated , mm -ype S ()-'-(-:-A) and ()-A).
&utting and perforating dimensions
ISO 3775:1990
&inematography. Printed , mm -ype S image area on )* mm motion-picture film perforated ,
mm -ype S ()-'). Position and dimensions
ISO 3785:1995
Steel. Designation of test piece a/es
ISO%IEC 3788:1990
!nformation processing. E-track% )@%: mm (A%( in) wide magnetic tape for information
interchange using phase encoding at )@* ftpmm ('@AA ftpi) - *' cpmm ()*AA cpi)
ISO 3793:1976
<ssential oils. <stimation of primary and secondary free alcohols content $y acetylation in
pyridine
ISO 3794:1976
<ssential oils (containing tertiary alcohols). <stimation of free alcohols content $y determination
of ester value after acetylation
ISO 3796:2001
Ships and marine technology. &lear openings for e/ternal single-leaf doors
ISO 3808:2002
#oad vehicles. Dnscreened high-voltage ignition ca$les. General specifications% test methods and
re=uirements
ISO 3822-1:1999
3coustics. 2a$oratory tests on noise emission from appliances and e=uipment used in water
supply installations. 0ethod of measurement
ISO 3822-2:1996
3coustics. 2a$oratory tests on noise emission from appliances and e=uipment used in water
supply installations. 0ounting and operating conditions for draw-off taps and mi/ing valves
ISO 3822-3:1997
3coustics. 2a$oratory tests on noise emission from appliances and e=uipment used in water
supply installations. 0ounting and operating conditions for in-line valves and appliances
ISO 3822-4:1997
3coustics. 2a$oratory tests on noise emission from appliances and e=uipment used in water
supply installations. 0ounting and operating conditions for special appliances
ISO 3823-1:1999
Dental rotary instruments. Burs. Steel and car$ide $urs
ISO 3823-2:2003
Dental rotary instruments. Burs. >inishing $urs
ISO 3830:1996
Petroleum products. Determination of lead content of gasoline. !odine monochloride method
ISO 3838:1996
0ethods for determination of density or relative density of petroleum and petroleum products
(pyknometer methods)
ISO 3849:2003
"il of citronella% Sri 2anka type IB:!&ym$opogon nardusB:# (2.) ;. ;atson var.
B:!lena$atuB:# Stapf.J
ISO 3861:1997
#u$$er hoses for sand and grit $lasting. Specification
ISO 3865:1997
#u$$er% vulcani.ed or thermoplastic. 0ethods of test for staining in contact with organic
material
ISO 3867:2001
&omposition cork. </pansion +oint fillers. -est methods
ISO 3868:1995
0etallic and other non-organic coatings. 0easurement of coating thicknesses. >i.eau multiple-
$eam interferometry method
ISO 3869:2001
&omposition cork. </pansion +oint fillers. Specifications% packaging and marking
ISO 3874:1997
Series ) freight containers. 1andling and securing
ISO 3882:2003
0etallic and other inorganic coatings. #eview of methods of measurement of thickness
ISO 3887:2003
Steels. Determination of depth of decar$uri.ation
ISO 3888-1:1999
Passenger cars. -est track for a severe lane-change manoeuvre. Dou$le-lane change
ISO 3888-2:2002
Passenger cars. -est track for a severe lane-change manoeuvre. "$stacle avoidance
ISO 3890-1:2000
0ilk and milk products. Determination of residues of organochlorine compounds (pesticides).
General considerations and e/traction methods
ISO 3890-2:2000
0ilk and milk products. Determination of residues of organochlorine compounds (pesticides).
-est methods for crude e/tract purification and confirmation
ISO 3892:2001
&onversion coatings on metallic materials. Determination of coating mass per unit area.
Gravimetric methods
ISO 3901:2001
!nformation and documentation. !nternational Standard #ecording &ode (!S#&)
ISO 3915:1999
Plastics. 0easurement of resistivity of conductive plastics
ISO 3918:1996
0ilking machine installations. 7oca$ulary
ISO 3927:2002
0etallic powders% e/cluding powders for hardmetals. Determination of compress$ility in
unia/ial compression
ISO 3928:1999
Sintered metal materials% e/cluding hardmetals. >atigue test pieces
ISO 3943:1993
Photography. Processing chemicals. Specifications for anhydrous sodium acetate
ISO 3946:1994
Starches and derived products. Determination of total phosphorus content. Spectrometric method
ISO 3947:1994
Starches% native or modified. Determination of total fat content
ISO 3950:1997
Dentistry. Designation system for teeth and areas of the oral cavity
ISO 3952-1:1995
Ginematic diagrams. Graphical sym$ols. Part )
ISO 3952-2:1995
Ginematic diagrams. Graphical sym$ols. Part @
ISO 3952-3:1995
Ginematic diagrams. Graphical sym$ols. Part '
ISO 3952-4:1997
Ginematic diagrams. Graphical sym$ols. 0iscellaneous mechanisms and their components
ISO 3953:1995
0etallic powders. Determination of tap density
ISO 3961:2000
3nimal and vegeta$le fats and oils. Determination of iodine value
ISO 3968:2001
1ydraulic fluid power. >ilters. <valuation of differential pressure versus flow characteristics
ISO 3977-4:2002
Gas tur$ines. Procurement. >uels and environment
ISO 3977-5:2003
Gas tur$ines. Procurement. 3pplications for petroleum and natural gas industries
ISO 3977-7:2002
Gas tur$ines. Procurement. -echnical information
ISO 3977-8:2002
Gas tur$ines. Procurement. !nspection% testing% installation and commissioning
ISO 3993:1996
2i=uefied petroleum gas and light hydrocar$ons. Determination of density or relative density.
Pressure hydrometer method
ISO 3994:2001
Plastics hoses. 1elical-thermoplastic-reinforced thermoplastics hoses for suction and discharge
of a=ueous materials. Specification
ISO 4010 to ISO 4957
ISO 4010:1998
Diesel engines. &ali$rating no..le% delay pintle type
ISO 4014:2001
1e/agon head $olts. Product grades 3 and B
ISO 4016:2001
1e/agon head $olts. Product grade &
ISO 4017:2001
1e/agon head screws. Product grades 3 and B
ISO 4018:2001
1e/agon head screws. Product grade &
ISO 4020:2001
#oad vehicles. >uel filters for diesel engines.-est methods
ISO 4023:1995
#u$$er hoses for steam. -est methods
ISO 4032:2001
1e/agon nuts% style ). Product grades 3 and B
ISO 4033:2001
1e/agon nuts% style @. Product grades 3 and B
ISO 4034:2001
1e/agon nuts. Product grade &
ISO 4035:2001
1e/agon thin nuts (chamfered). Product grades 3 and B
ISO 4036:2001
1e/agon thin nuts (unchamfered). Product grade B
ISO 4037-1:1996
8 and gamma reference radiation for cali$rating dosemeters and doserate meters and for
determining their response as a function of photon energy. #adiation characteristics and
production methods
ISO 4037-2:1997
8 and gamma reference radiation for cali$rating dosemeters and doserate meters and for
determining their response as a function of photon energy. Dosimetry for radiation protection
over the energy ranges , ke7 to )% ' 0e7 and C 0e7 to E 0e7
ISO 4037-3:1999
8 and gamma reference radiation for cali$rating dosemeters and doserate meters and for
determining their response as a function of photon energy. &ali$ration of area and personal
dosemeters and the measurement of their response as a function of energy and angle of incidence
ISO 4042:2000
>asteners. <lectroplated coatings
ISO 4044:1998
2eather. Preparation of chemical test samples
ISO 4045:1998
2eather. Determination of p1
ISO 4046-1:2002
Paper% $oard% pulps and related terms. 7oca$ulary. 3lpha$etical inde/
ISO 4046-2:2002
Paper% $oard% pulps and related terms. 7oca$ulary. Pulping terminology
ISO 4046-3:2002
Paper% $oard% pulps and related terms. 7oca$ulary. Paper-making terminology
ISO 4046-4:2002
Paper% $oard% pulps and related terms. 7oca$ulary. Paper and $oard grades and converted
products
ISO 4046-5:2002
Paper% $oard% pulps and related terms. 7oca$ulary. Properties of pulp% paper and $oard
ISO 4047:1998
2eather. Determination of sulphated total ash and sulphated water-insolu$le ash
ISO 4048:1998
2eather. Determination of matter solu$le in dichloromethane
ISO 4049:2000
Dentistry. Polymer-$ased filling% restorative and luting materials
ISO 4057:1986
!nformation processing. Data interchange on *%'A mm (A.@( in) magnetic tape cartridge% *'
$pmm ()*AA $pi) phase-encoded
ISO 4063:2000
;elding and allied processes. ?omenclature of processes and reference num$ers
ISO 4064-2:2001
0easurement of water flow in closed conduits. 0eters for cold pota$le water. !nstallation
re=uirements and selection
ISO 4065:1996
-hermoplastics pipes. Dniversal wall thickness ta$le
ISO 4066:2000
&onstruction drawings. Bar scheduling
ISO 4074:2002
?atural late/ ru$$er condoms. #e=uirements and test methods
ISO 4080:1995
#u$$er and plastics hoses and hose assem$lies. Determination of permea$ility to gas
ISO 4087:1991
0icrographics. 0icrofilming of newspapers for archival purposes on '( mm microfilm
ISO 4090:2001
Photography. 0edical radiographic cassettesscreensfilms and hard-copy imaging films.
Dimensions and specifications
ISO 4093:1999
Diesel engines. >uel in+ection pumps. 1igh-pressure pipes for testing
ISO 4096:1978
<ssential oils (containing tertiary alcohols). <valuation of free alcohols content $y determination
of ester value after cold formylation
ISO 4097:2000
#u$$er% ethylene-propylene-diene (<PD0). <valuation procedure
ISO 4115:1997
3ir cargo e=uipment. 3irland pallet nets
ISO 4118:2000
3ir cargo e=uipment. ?on-certified lower-deck containers for air transport. Specification and
testing
ISO 4119:1996
Pulps. Determination of stock concentration
ISO 4126-2:2003
Safety devices for protection against e/cessive pressure. Bursting disc safety devices
ISO 4135:2001
3naesthetic and respiratory e=uipment. 7oca$ulary
ISO 4142:2002
2a$oratory glassware. -est tu$es
ISO 4157-1:1999
&onstruction drawings. Designation systems. Buildings and parts of $uildings
ISO 4157-2:1999
&onstruction drawings. Designation systems. #oom names and num$ers
ISO 4157-3:1999
&onstruction drawings. Designation systems. #oom identifiers
ISO 4161:1999
1e/agon nuts with flange. &oarse thread
ISO 4165:2003
#oad vehicles. <lectrical connections. Dou$le-pole connection
ISO 4168:2002
-imekeeping instruments. &onditions for carrying out checks on radioluminescent deposits
ISO 4172:1997
-echnical drawings. &onstruction drawings. Drawings for the assem$ly of prefa$ricated
structures
ISO 4190-1:1999
2ift (DS6 <levator) installation. &lass !% !!% !!! and 7! lifts
ISO 4190-2:2001
2ift (DS6 <levator) installation. &lass !7 lifts
ISO 4241:2001
&inematography. -heatre pro+ection leader% trailer and cue marks. Specifications
ISO 4246:1994
&inematography. 7oca$ulary
ISO 4256:1998
2i=uid petroleum products. Determination of gauge vapour pressure. 2PG method
ISO 4257:2001
0ethods of test for petroleum and its products. 2i=uefied petroleum gases. 0ethod of sampling
ISO 4259:1996
Petroleum products. Determination and application of precision data in relation to methods of
test
ISO 4263-2:2003
Petroleum and related products. Determination of the ageing $ehaviour of inhi$ited oils and
fluids. -"S- test. Procedure for category 1>& hydraulic fluids
ISO 4264:1997
0ethods of test for petroleum and its products. Petroleum products. &alculation of cetane inde/
of middle-distillate fuels $y the four-varia$le e=uation
ISO 4266-1:2002
Petroleum and li=uid petroleum products. 0easurement of level and temperature in storage tanks
$y automatic methods. 0easurement of level in atmospheric tanks
ISO 4266-2:2002
Petroleum and li=uid petroleum products. 0easurement of level and temperature in storage tanks
$y automatic methods. 0easurement of level in marine vessels
ISO 4266-3:2002
Petroleum and li=uid petroleum products. 0easurement of level and temperature in storage tanks
$y automatic methods. 0easurement of level in pressuri.ed storage tanks (non-refrigerated)
ISO 4266-4:2002
Petroleum and li=uid petroleum products. 0easurement of level and temperature in storage tanks
$y automatic methods. 0easurement of temperature in atmospheric tanks
ISO 4266-5:2002
Petroleum and li=uid petroleum products. 0easurement of level and temperature in storage tanks
$y automatic methods. 0easurement of temperature in marine vessels
ISO 4266-6:2002
Petroleum and li=uid petroleum products. 0easurement of level and temperature in storage tanks
$y automatic methods. 0easurement of temperature in pressuri.ed storage tanks (non-
refrigerated)
ISO 4267-2:1996
Petroleum and li=uid petroleum products. &alculation of oil =uantities. Dynamic measurements
ISO 4268:2000
Petroleum and li=uid petroleum products. -emperature measurements. 0anual methods
ISO 4269:2001
Petroleum and li=uid petroleum products. -ank cali$ration $y li=uid measurement. !ncremental
method using volumetric meters
ISO 4287:2000
Geometrical product specification (GPS). Surface te/ture. Profile method. -erms% definitions and
surface te/ture parameters
ISO 4288:1998
Geometric product specification (GPS). Surface te/ture. Profile method6 #ules and procedures
for the assessment of surface te/ture
ISO 4308-1:2003
&ranes and lifting appliances. Selection of wire ropes. General
ISO 4320:1998
?on-ionic surface active agents. Determination of cloud point inde/. 7olumetric method
ISO 4375:2000
1ydrometric determinations. &a$leway systems for stream gauging
ISO 4377:2002
1ydrometric determinations. >low measurement in open channels using structures. >lat-7 weirs
ISO 4381:2000
Plain $earings. 2ead and tin casting alloys for multilayer plain $earings
ISO 4383:2000
Plain $earings. 0ultilayer materials for thin-walled plain $earings
ISO 4384-1:2000
Plain $earings. 1ardness testing of $earing metals. &ompound materials
ISO 4392-1:2002
1ydraulic fluid power. Determination of characteristics of motors. 3t constant low speed and
constant pressure
ISO 4392-2:2002
1ydraulic fluid power. Determination of characteristics of motors. Starta$ility
ISO 4401:1994
1ydraulic fluid power. >our-port directional control valves. 0ounting surfaces
ISO 4404:1998
Petroleum and related products. Determination of the corrosion resistance of water-containing
fire-resistant fluids for hydraulic systems
ISO 4404-1:2001
Petroleum and related products. Determination of the corrosion resistance of fire-resistant
hydraulic fluids. ;ater-containing fluids
ISO 4404-2:2003
Petroleum and related products. Determination of the corrosion resistance fire-resistant hydraulic
fluids. ?on-a=ueous fluids
ISO 4406:1999
1ydraulic fluid power. >luids. 0ethod for coding the level of contamination $y solid particles
ISO 4407:2002
1ydraulic fluid power. >luid contamination. Determination of particulate contamination $y the
counting method using an optical microscope
ISO 4413:1998
1ydraulic fluid power. General rules relating to systems
ISO 4414:1998
Pneumatic fluid power. General rules relating to systems
ISO 4433-1:1997
-hermoplastic pipes. #esistance to li=uid chemicals. &lassification. !mmersion test method
ISO 4433-2:1997
-hermoplastics pipes. #esistance to li=uid chemicals. &lassification. Polyolefin pipes
ISO 4433-3:1997
-hermoplastic pipes. #esistance to li=uid chemicals. &lassification. Dnplastici.ed poly(vinyl
chloride) (P7&-D)% high-impact poly(vinyl chloride) (P7&-1!) and chlorinated poly(vinyl
chloride) (P7&-&) pipes
ISO 4433-4:1997
-hermoplastics pipes. #esistance to li=uid chemicals. &lassification. Poly(vinylidene fluoride)
(P7D>) pipes
ISO 4490:2002
0etallic powders. Determination of flow time $y means of a cali$rated funnel (1all flowmeter)
ISO 4491-2:1999
0etallic powders. Determination of o/ygen content $y reduction methods. 2oss of mass on
hydrogen reduction (hydrogen loss)
ISO 4507:2000
Sintered ferrous materials% car$uri.ed or car$onitrided. Determination and verification of case-
hardening depth $y a micro-hardness test
ISO 4512:2000
Petroleum and li=uid petroleum products. <=uipment for measurement of li=uid levels in storage
tanks. 0anual methods
ISO 4516:2002
0etallic and other inorganic coatings. 7ickers and Gnoop microhardness tests
ISO 4518:1995
0etallic coatings. 0easurement of coating thickness. Profilometric method
ISO 4524-2:2000
0etallic coatings. -est methods for electrodeposited gold and gold alloy coatings. 0i/ed
flowing gas (0>G) environmental tests
ISO 4524-3:1995
0etallic coatings. -est methods for electrodeposited gold and gold alloy coatings. <lectrographic
tests for porosity
ISO 4524-6:1995
0etallic coatings. -est methods for electrodeposited gold and gold alloy coatings. Determination
of the presence of residual salts
ISO 4525:2003
0etallic coatings. <lectroplated coatings of nickel plus chromium on plastics materials
ISO 4527:2003
0etallic coatings. 3utocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and
test methods
ISO 4528:2000
7itreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelein
enamelled areas of articles
ISO 4535:2000
7itreous and porcelain enamels. 3pparatus for determination of resistance to hot detergent
solutions used for washing te/tiles
ISO 4536:1995
0etallic and non-organic coatings on metallic su$strates. Saline droplets corrosion test (SD test)
ISO 4538:1995
0etallic coatings. -hioacetamide corrosion test (-33 test)
ISO 4541:1995
0etallic and other non-organic coatings. &orrodkote test (&"## test)
ISO 4543:1995
0etallic and other non-organic coatings. General rules for corrosion tests applica$le for storage
conditions
ISO 4566:1995
Small craft with in$oard engine. Propeller shaft ends and $osses with )6)A taper
ISO 4577:1999
Plastics. Polypropylene and propylene-copolymers. Determination of thermal o/idative sta$ility
in air. "ven method
ISO 4583:1998
Plastics. <po/y resins and related materials. Determination of easily saponifia$le chlorine
ISO 4587:2003
3dhesives. Determination of tensile lap-shear strength of rigid-to-rigid $onded assem$lies
ISO 4589-1:2000
Plastics. Determination of $urning $ehaviour $y o/ygen inde/. Guidance
ISO 4589-2:1999
Plastics. Determination of $urning $ehaviour $y o/ygen inde/. 3m$ient-temperature test
ISO 4589-3:1996
Plastics. Determination of $urning $ehaviour $y o/ygen inde/. <levated temperature test
ISO 4590:2003
#igid cellular plastics. Determination of the volume percentage of open cells and of closed cells
ISO 4597-1:1998
Plastics. 1ardeners and accelerators for epo/ide resins. Designation
ISO 4599:1997
Plastics. Determination of resistance to environmental stress cracking (<S&). Bent strip method
ISO 4600:1998
Plastics. Determination of environmental stress cracking (<S&). Ball or pin impression method
ISO 4602:1997
#einforcements. ;oven fa$rics. Determination of num$er of yarns per unit length of warp and
weft
ISO 4603:1993
-e/tile glass. ;oven fa$rics. Determination of thickness
ISO 4606:1995
-e/tile glass. ;oven fa$ric. Determination of tensile $reaking force and elongation at $reak $y
the strip method
ISO 4608:1998
Plastics. 1omopolymer and copolymer resins of vinyl chloride for general use. Determination of
plastici.er a$sorption at room temperature
ISO 4610:2001
Plastics. 7inyl chloride homopolymer and copolymer resins. Sieve analysis using air-+et sieve
apparatus
ISO 4611:2001
Plastics. Determination of the effects of e/posure to damp heat% water spray and salt mist
ISO 4612:1999
Plastics. Preparation of P7& pastes for test purposes. Planetary-mi/er method
ISO 4613-1:1999
Plastics. <thylenevinyl acetate (<73&) moulding and e/trusion materials. Designation and
specification
ISO 4613-2:1996
Plastics. <thylenevinyl acetate (<73&) moulding and e/trusion materials. Preparation of test
specimens and determination of properties
ISO 4614:2000
Plastics. 0elamine-formaldehyde mouldings. Determination of e/tracta$le formaldehyde
ISO 4615:1999
Plastics. Dnsaturated polyesters and epo/ide resins. Determination of total chlorine content
ISO 4617:2000
Paints and varnishes. 2ist of e=uivalent terms
ISO 4618-2:2000
Paints and varnishes. -erms and definitions for coating materials. Special terms relating to paint
characteristics and properties
ISO 4618-3:2000
Paints and varnishes. -erms and definitions for coating materials. Surface preparation and
methods of application
ISO 4619:1998
Driers for paints and varnishes
ISO 4622:1995
Paints and varnishes. Pressure test for stacka$ility
ISO 4623-1:2002
Paints and varnishes. Determination of resistance to filiform corrosion. Steel su$strates
ISO 4624:2003
Paints and varnishes. Pull-off test for adhesion
ISO 4628-6:2001
Paints and varnishes. <valuation of degradation of paint coatings. Designation of intensity%
=uantity and si.e of common types of defect. #ating of degree of chalking $y tape method
ISO 4629:1998
Binders for paints and varnishes. Determination of hydro/yl value. -itrimetric method
ISO 4638:1995
Polymeric materials% cellular fle/i$le. Determination of air flow permea$ility
ISO 4639-2:1995
#u$$er tu$ing and hoses for fuel circuits for internal-com$ustion engines. Specification.
"/ygenated fuels
ISO 4639-3:1995
#u$$er tu$ing and hoses for fuel circuits for internal-com$ustion engines. Specification.
"/idi.ed fuels
ISO 4649:2002
#u$$er% vulcani.ed or thermoplastic. Determination of a$rasion resistance using a rotating
cylindrical drum device
ISO 4651:1995
&ellular ru$$ers and plastics. Determination of dynamic cushioning performance
ISO 4658:1999
3crylonitrile-$utadiene ru$$er (?B#). <valuation procedure
ISO 4659:2003
Styrene-$utadiene ru$$er (car$on $lack or car$on $lack and oil master$atches). <valuation
procedure
ISO 4660:1999
#u$$er% raw natural. &olour inde/ test
ISO 4664:1998
#u$$er. Guide to the determination of dynamic properties
ISO 4665:1998
#u$$er% vulcani.ed and thermoplastic. #esistance to weathering
ISO 4671:2001
#u$$er and plastics hoses and hose assem$lies. 0ethods of measurement of dimensions
ISO 4672:1999
#u$$er and plastics hoses. Su$-am$ient temperature fle/i$ility tests
ISO 4674-2:1998
#u$$er- or plastics-coated fa$rics. Determination of tear resistance. Ballistic pendulum method
ISO 4695:1995
!ron ores. Determination of reduci$ility
ISO 4698:1994
!ron ore pellets. Determination of relative free-swelling inde/
ISO 4703:2001
-est conditions for surface grinding machines with two columns. 0achines for grinding
slideways. -esting of the accuracy
ISO 4708:2000
&omposition cork. Gasket material. -est methods
ISO 4709:2000
&omposition cork. Gasket material. &lassification system% re=uirements% sampling% packing and
marking
ISO 4710:2000
&ork. &ylindrical stoppers for sparkling wines and gasified wines. &haracteristics
ISO 4714:2000
&omposition cork. Specifications% sampling% packaging and marking
ISO 4715:1978
<ssential oils. 9uantitative evaluation of residue on evaporation
ISO 4720:1992
<ssential oils. ?omenclature
ISO 4753:2000
>asteners. <nds of parts with e/ternal !S" metric screw thread
ISO 4757:1995
&ross recesses for screws
ISO 4759-1:2001
-olerances for fasteners. Bolts% screws% studs and nuts. Product grades 3% B and &
ISO 4759-3:2000
-olerances for fasteners. Plain washers for $olts% screws and nuts. Product grades 3 and &
ISO 4762:1998
1e/agon socket head cap screws
ISO 4782:1987
Specification for metal wire for industrial wire screens and woven wire cloth
ISO 4795:1996
2a$oratory glassware. Glass for thermometer $ul$s
ISO 4796-1:2001
2a$oratory glassware. Bottles. Screw-neck $ottles
ISO 4796-2:2001
2a$oratory glassware. Bottles. &onical neck $ottles
ISO 4796-3:2001
2a$oratory glassware. Bottles. 3spirator $ottles
ISO 4798:1997
2a$oratory glassware. >ilter funnels
ISO 4800:1998
2a$oratory glassware. Separating funnels and dropping funnels
ISO 4823:2001
Dentistry. <lastomeric impression materials
ISO 4824:1997
Dentistry. &eramic denture teeth
ISO 4833:2003
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of
microorganisms. &olony-count techni=ue at 'ABAD&
ISO 4834:1997
&inematography. 0agnetic sound test films e/cluding striped release prints. Basic technical
characteristics
ISO 4869-2:1995
3coustics. 1earing protectors. <stimation of effective 3-weighted sound pressure levels when
hearing protectors are worn
ISO 4869-4:2000
3coustics. 1earing protectors. 0easurement of effective sound pressure levels for level-
dependent sound-restoration ear muffs
ISO 4871:1997
3coustics. Declaration and verification of noise emission values of machinery and e=uipment
ISO%IEC 4873:1991
!nformation technology. !S" ,-$it code for information interchange. Structure and rules for
implementation
ISO 4880:1997
Burning $ehaviour of te/tiles and te/tile products. 7oca$ulary
ISO 4892-1:2001
Plastics. 0ethods of e/posure to la$oratory light sources. General guidance
ISO 4892-2:2000
Plastics. 0ethods of e/posure to la$oratory light sources. 8enon-arc sources
ISO 4892-3:2000
Plastics. 0ethods of e/posure to la$oratory light sources. >luorescent D7 lamps
ISO 4894-1:1999
Plastics. Styreneacrylonitrile (S3?) copolymer moulding and e/trusion materials. Designation
system and $asis for specifications
ISO 4894-2:1999
Plastics. Styreneacrylonitrile (S3?) copolymer moulding and e/trusion materials. Preparation
of test specimens and determination of properties
ISO 4895:2000
Plastics. 2i=uid epo/y resins. Determination of tendency to crystalli.e
ISO 4902:1989
!nformation technology. Data communication. ':-pole D-<D&< interface connector and
contact num$er assignments
ISO 4903:1989
!nformation technology. Data communication. )(-pole D-<D&< interface connector and
contact num$er assignments
ISO 4909:2000
Bank cards. 0agnetic stripe data content for track '
ISO 4912:1981
-e/tiles. &otton fi$res. <valuation of maturity. 0icroscopic method
ISO 4921:2002
Gnitting. Basic concepts. 7oca$ulary
ISO 4957:2000
-ool steels
ISO 5007 to ISO 5991
ISO 5007:2003
3gricultural wheeled tractors. "peratorKs seat. 2a$oratory measurement of transmitted vi$ration
ISO 5008:2002
3gricultural wheeled tractors and field machinery. 0easurement of whole-$ody vi$ration of the
operator
ISO 5011:2000
!nlet air cleaning e=uipment for internal com$ustion engines and compressors. Performance
testing
ISO 5024:1999
Petroleum li=uids and li=uefied petroleum gases. 0easurement. Standard reference conditions
ISO 5025:1997
#einforcement products. ;oven fa$rics. Determination of width and length
ISO 5057:1993
!ndustrial trucks. !nspection and repair of fork arms in service on fork-lift trucks
ISO 5061:2002
3nimal feeding stuffs. Determination of castor oil seed husks. 0icroscope method
ISO 5079:1996
-e/tiles. >i$res. Determination of $reaking force and elongation at $reak of individual fi$res
ISO 5080:1999
Sisal agricultural twines
ISO 5084:1997
-e/tiles. Determination of thickness of te/tiles and te/tile products
ISO 5131:1996
3coustics. -ractors and machinery for agriculture and forestry. 0easurement of noise at the
operatorKs position. Survey method
ISO 5135:1999
3coustics. Determination of sound power levels of noise from air-terminal devices% air-terminal
units% dampers and valves $y measurement in a rever$eration room
ISO 5136:2003
3coustics. Determination of sound power radiated into a duct $y fans and other air-moving
devices. !n-duct method
ISO 5155:1996
1ousehold refrigerating appliances. >ro.en food storage ca$inets and food free.ers.
&haracteristics and test methods
ISO 5165:1998
Petroleum products. Determination of the ignition =uality of diesel fuels. &etane engine method
ISO 5167-1:2003
0easurement of fluid flow $y means of pressure differential devices inserted in circular cross-
section conduits running full. General principles and re=uirements
ISO 5167-2:2003
0easurement of fluid flow $y means of pressure differential devices inserted in circular cross-
section conduits running full. "rifice plates
ISO 5167-3:2003
0easurement of fluid flow $y means of pressure differential devices inserted in circular cross-
section conduits running full. ?o..les and 7enturi no..les
ISO 5167-4:2003
0easurement of fluid flow $y means of pressure differential devices inserted in circular cross-
section conduits running full. 7enturi tu$es
ISO &' 5168:1998
0easurement of fluid flow. <valuation of uncertainties
ISO 5172:1997
0anual $lowpipes for welding% cutting and heating. Specification and tests
ISO 5183-1:2001
#esistance welding e=uipment. <lectrode adaptors% male taper )6)A. &onical fi/ing% taper )6)A
ISO 5183-2:2001
#esistance welding e=uipment. <lectrode adaptors% male taper )6)A. Parallel shank fi/ing for
end-thrust electrodes
ISO 5198:1999
&entrifugal% mi/ed flow and a/ial pumps. &ode for hydraulic performance tests. Precision class
ISO 5199:2002
-echnical specifications for centrifugal pumps. &lass !!
ISO 5210:1996
!ndustrial valves. 0ulti-turn valve actuator attachments
ISO 5211:2001
!ndustrial valves. Part-turn actuator attachments
ISO 5248:2003
-e/tile machinery and accessories. Dyeing and finishing machinery. 7oca$ulary of ancillary
devices
ISO 5250:2003
-e/tile machinery and accessories. Dyeing and finishing machinery. -erms for tentering and
heat-treatment machinery
ISO 5261:1999
-echnical drawings. Simplified representation of $ars and profile sections
ISO 5263:1997
Pulps. 2a$oratory wet disintegration
ISO 5264-2:2002
Pulps. 2a$oratory $eating. P>! mill method
ISO 5267-1:2001
Pulps. Determination of draina$ility. Schopper-#iegler method
ISO 5269-1:2001
Pulps. Preparation of la$oratory sheets for physical testing. &onventional sheet-former method
ISO 5269-2:2001
Pulps. Preparation of la$oratory sheets for physical testing. #apid-Gothen method
ISO 5270:2000
Pulps. 2a$oratory sheets. Determination of physical properties
ISO 5287:2003
Belt drives. ?arrow 7-$elts for the automotive industry. >atigue test
ISO 5288:2001
Synchronous $elt drives. 7oca$ulary
ISO 5290:2001
Belt drives. Grooved pulleys for narrow 7-$elts. Groove sections E?5% )(?5 and @(?5
(effective system)
ISO 5348:1998
0echanical vi$ration and shock. 0echanical mounting of accelerometers
ISO 5349-1:2001
0echanical vi$ration. 0easurement and evaluation of human e/posure to hand-transmitted
vi$ration. General re=uirements
ISO 5349-2:2002
0echanical vi$ration. 0easurement and assessment of human e/posure to hand-transmitted
vi$ration. Practical guidance for measurement at the workplace.
ISO 5350-1:1998
Pulps. <stimation of dirt and shives. !nspection of la$oratory sheets
ISO 5350-2:1998
Pulps. <stimation of dirt and shives. !nspection of mill sheeted pulp
ISO 5350-3:1997
Pulps. <stimation of dirt and shives. !nspection $y reflected light
ISO 5353:1999
<arth-moving machinery% and tractors and machinery for agriculture and forestry. Seat inde/
point
ISO 5377:1994
Starch hydrolysis products. Determination of reducing power and de/trose e=uivalent. 2ane and
<ynon constant titre method
ISO 5378:1994
Starches and derived products. Determination of nitrogen content $y the G+eldahl method.
Spectrometric method
ISO 5381:1994
Starch hydrolysis products. Determination of water content. 0odified Garl >ischer method
ISO 5399:1998
2eather. Determination of water-solu$le magnesium salts. <D-3 titrimetric method
ISO 5402:2002
2eather. Physical and mechanical tests. Determination of fle/ resistance $y fle/ometer method
ISO 5403:2002
2eather. Physical and mechanical tests. Determination of water resistance of fle/i$le leather
ISO 5404:2002
2eather. Physical and mechanical tests. Determination of the water resistance of heavy leathers
ISO 5414-1:2002
-ool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools. Dimensions
of the driving system of tool shanks
ISO 5414-2:2002
-ool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools. &onnecting
dimensions of chucks and designation
ISO 5416:1997
Direct reduced iron. Determination of metallic iron content. Bromide-methanol titrimetric
method
ISO 5418-1:1994
!ron ores. Determination of copper content. @%@K-Bi=uinolyl spectrophotometric method
ISO 5426-2:1996
!nformation and documentation. </tension of the 2atin alpha$et coded character set for
$i$liographic information interchange. 2atin characters used in minor <uropean languages and
o$solete typography
ISO 5431:1999
2eather. ;et $lue goat skins. Specification
ISO 5433:1999
2eather. Bovine wet $lue. Specification
ISO 5436-1:2001
Geometrical Product Specifications (GPS). Surface te/ture6 Profile methodL 0easurement
standards. Geometric product specifications (GPS). Surface te/ture. Profile method cali$ration.
0easurement standards
ISO 5436-2:2002
Geometrical Product Specifications (GPS). Surface te/ture. Profile method. 0easurement
standards. Software measurement standards
ISO 5455:1995
-echnical drawings. Scales
ISO 5456-1:1999
-echnical drawings. Pro+ection methods. Synopsis
ISO 5456-2:1999
-echnical drawings. Pro+ection methods. "rthographic representations
ISO 5456-3:1999
-echnical drawings. Pro+ection methods. 3/onometric representations
ISO 5456-4:1996
-echnical drawings. Pro+ection methods. &entral pro+ection
ISO 5457:1999
-echnical product documentation. Si.es and layout of drawing sheets
ISO 5458:1999
Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing
ISO 5459:1981
-echnical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical
tolerances
ISO 5466:1996
Photography. Processed safety photographic films. Storage practices
ISO 5470-1:1999
#u$$er- or plastics-coated fa$rics. Determination of a$rasion resistance. -a$er a$rader
ISO 5470-2:2003
#u$$er- or plastics-coated fa$rics. Determination of a$rasion resistance. 0artindale a$rader
ISO 5473:1997
#u$$er or plastics-coated fa$rics. Determination of crush resistance
ISO 5507:2002
"ilseeds% vegeta$le oils and fats. ?omenclature
ISO 5508:1995
3nimal and vegeta$le fats and oils. 3nalysis $y gas chromatography of methyl esters of fatty
acids
ISO 5509:2001
3nimal and vegeta$le fats and oils. Preparation of methyl esters of fatty acids
ISO 5511:1997
"ilseeds. Determination of oil content. 0ethod using continuous-wave low-resolution nuclear
magnetic resonance spectrometry (#apid method)
ISO 5530-4:2002
;heat flour (-riticum aestivum 2.). Physical characteristics of doughs. Determination of
rheological properties using an alveograph
ISO 5536:2002
0ilk fat products. Determination of water content. Garl >ischer method
ISO 5555:2002
3nimal and vegeta$le fats and oils. Sampling
ISO 5593:1997
#olling $earings. 7oca$ulary
ISO 5596:1999
1ydraulic fluid power. Gas-loaded accumulators with separator. #anges of pressures and
volumes and characteristic =uantities
ISO 5599-1:2001
Pneumatic fluid power. >ive-port directional control valves. 0ounting interface surfaces without
electrical connector
ISO 5599-2:2001
Pneumatic fluid power. >ive-port directional control valves. 0ounting interface surfaces with
optional electrical connector
ISO 5620-1:1997
Ship$uilding and marine structures. >illing connection for drinking water tanks. General
re=uirements
ISO 5620-2:1997
Ship$uilding and marine structures. >illing connection for drinking water tanks. &omponents
ISO 5626:1993
Paper. Determination of folding endurance
ISO 5631:2000
Paper and $oard. Determination of colour (&@BAD). Diffuse reflectance method
ISO 5652:1984
!nformation processing. E-track% )@%: mm (A.( in) wide magnetic tape for information
interchange. >ormat and recording% using group coding at @C* cpmm (*@(A cpi)
ISO 5655:2000
Photography. !ndustrial radiographic films (roll and sheet) and metal intensifying screens.
Dimensions
ISO &' 5658-1:1997
#eaction to fire tests. Spread of flame. Guidance on flame spread
ISO 5658-2:1996
#eaction to fire tests. Spread of flame. 2ateral spread on $uilding products in vertical
configuration
ISO 5658-4:2001
#eaction to fire tests. Spread of flame. !ntermediate-scale test of vertical spread of flame with
vertically oriented specimen
ISO 5659-1:1999
Plastics. Smoke generation. Guidance on optical-density testing
ISO 5659-2:1999
Plastics. Smoke generation. Determination of optical density $y a single cham$er test
ISO%&' 5659-3:1999
Plastics. Smoke generation. Determination of optical density $y a dynamic flow method
ISO 5667-3:1996
;ater =uality. Sampling. Guidance on the preservation and handling of samples
ISO 5667-13:1998
;ater =uality. Sampling. Guidance on sampling of sludges from sewage and water treatment
works
ISO 5667-16:1998
;ater =uality. Sampling. Guidance on $iotesting of samples
ISO 5667-17:2000
;ater =uality. Sampling. Guidance on sampling of suspended sediments
ISO 5667-18:2001
;ater =uality. Sampling. Guidance on sampling of groundwater at contaminated sites
ISO 5681:1992
<=uipment for crop protection. 7oca$ulary
ISO 5687:1999
<=uipment for harvesting. &om$ine harvesters. Determination and designation of grain tank
capacity and unloading device performance
ISO 5707:1996
0ilking machine installations. &onstruction and performance
ISO 5718:2002
1arvesting e=uipment. Blades for agricultural rotary mowers. #e=uirements
ISO 5725-1:1994
3ccuracy (trueness and precision) of measurement methods and results. General principles and
definitions
ISO 5725-2:1994
3ccuracy (trueness and precision) of measurement methods and results. Basic methods for the
determination of repeata$ility and reproduci$ility of a standard measurement method
ISO 5725-3:1994
3ccuracy (trueness and precision) of measurement methods and results. !ntermediate measures
of the precision of a standard measurement method
ISO 5725-4:1994
3ccuracy (trueness and precision) of measurement methods and results. Basic methods for the
determination of the trueness of a standard measurement method
ISO 5725-5:1998
3ccuracy (trueness and precision) of measurement methods and results. 3lternative methods for
the determination of the precision of a standard measurement method
ISO 5725-6:1994
3ccuracy (trueness and precision) of measurement methods and results. Dse in practice of
accuracy values
ISO 5739:2003
&aseins and caseinates. Determination of contents of scorched particles and of e/traneous matter
ISO 5758:2002
&inematography. 2a$elling of containers for motion-picture film and magnetic material.
0inimum information for e/change of materials
ISO 5764:2002
0ilk. Determination of free.ing point. -hermistor cryoscope method (#eference method)
ISO 5765-1:2002
Dried milk% dried ice-mi/es and processed cheese. Determination of lactose content. <n.ymatic
method utili.ing the glucose moiety of the lactose
ISO 5765-2:2002
Dried milk% dried ice-mi/es and processed cheese. Determination of lactose content. <n.ymatic
method utili.ing the galactose moiety of the lactose
ISO 5768:1998
&inematography. !mage produced $y camera aperture type ; on )* mm motion-picture film.
Position and dimensions
ISO 5771:1996
#u$$er hose and hose assem$lies for transferring anhydrous ammonia. Specification
ISO 5774:2001
Plastics hoses% te/tile-reinforced% for compressed air. Specification
ISO 5778:2000
Ships and marine technology. Small weathertight steel hatches
ISO 5781:2000
1ydraulic fluid power. Pressure reducing valves% se=uence valves% unloading valves% throttle
valves and check valves. 0ounting surfaces
ISO 5782-1:1997
Pnuematic fluid power. &ompressed air filters. 0ain characteristics to $e included in supplierKs
literature and product-marking re=uirements
ISO 5782-2:1997
Pnuematic fluid power. &ompressed air filters. -est methods to determine the main
characteristics to $e included in supplierKs literature
ISO 5796:2000
#u$$er compounding ingredients. ?atural calcium car$onate. -est methods
ISO 5799:1991
Photography. Direct-e/posing medical and dental radiographic filmprocess systems.
Determination of !S" speed and !S" average gradient
ISO 5800:1987
Photography. &olour negative films for still photography. Determination of !S" speed
ISO 5805:1997
0echanical vi$ration and shock. 1uman e/posure. 7oca$ulary
ISO 5809:1994
Starches and derived products. Determination of sulfated ash
ISO 5810:1994
Starches and derived products. Determination of chloride content. Potentiometric method
ISO 5826:2003
#esistance welding e=uipment. -ransformers. General specifications applica$le to all
transformers
ISO 5828:2001
#esistance welding e=uipment. Secondary connecting ca$les with terminals connected to water-
cooled lugs. Dimensions and characteristics
ISO 5832-2:1999
!mplants for surgery. 0etallic materials. Dnalloyed titanium
ISO 5833:2002
!mplants for surgery. 3crylic resin cements
ISO 5834-1:1998
!mplants for surgery. Dltra-high molecular weight polyethylene. Powder form
ISO 5834-2:1998
!mplants for surgery. Dltra-high molecular weight polyethylene. 0oulded forms
ISO 5841-2:2000
!mplants for surgery. &ardiac pacemakers. #eporting of clinical performance of populations of
pulse generators or leads
ISO 5845-1:1999
-echnical drawings. Simplified representation of the assem$y of parts with fasteners. General
principles
ISO 5893:2002
#u$$er and plastics test e=uipment. -ensile% fle/ural and compression types (constant rate of
traverse). Specification
ISO 5894:1999
Ships and marine technology. 0anholes with $olted covers
ISO &' 5925-2:1997
>ire tests. Smoke control door and shutter assem$lies. &ommentary on test method and test data
application
ISO 5961:1995
;ater =uality. Determination of cadmium $y atomic a$sorption spectrometry
ISO 5981:1997
#u$$er- or plastics-coated fa$rics. Determination of resistance to com$ined shear fle/ing and
ru$$ing
ISO 5984:2002
3nimal feeding stuffs. Determination of crude ash
ISO 5985:2002
3nimal feeding stuffs. Determination of ash insolu$le in hydrochloric acid
ISO 5989:1995
Photography. Pre-packaged chemicals for the processing of silver halide $ased photographic
materials. 7oca$ulary
ISO 5990:2000
Photography. Processing chemicals. Specifications for potassium sulfite% *(A gl solution
ISO 5991:1979
<ssential oils. Determination of residue content from distillation under reduced pressure
ISO 6009 to ISO 6989
ISO 6009:1995
1ypodermic needles for single use. &olour coding for identification
ISO 6020-1:1998
1ydraulic fluid power. 0ounting dimensions for single rod cylinders% )* 0Pa ()*A $ar) series.
0edium series
ISO 6020-2:1991
1ydraulic fluid power. 0ounting dimensions for single rod cylinders% )* 0Pa ()*A $ar) series.
&ompact series
ISO 6020-3:1994
1ydraulic fluid power. 0ounting dimensions for single rod cylinders% )* 0Pa ()*A $ar) series.
&ompact series with $ores from @(A mm to (AA mm
ISO 6022:1981
1ydraulic fluid power. Single rod cylinders. 0ounting dimensions. @(A $ar (@( AAA kPa) series
ISO 6025:2000
&inematography. 3nalogue photographic sound test films% '( mm and )*mm. Specifications
ISO 6036:1996
&inematography. &olour motion-picture prints and slides for television. Density specifications
ISO 6038:1993
&inematography. Splices for use on :A mm% *( mm% '( mm and )* mm motion-picture films.
Dimensions and locations
ISO 6042:2000
Ships and marine technology. ;eathertight single-leaf steel doors
ISO 6055:1997
1igh-lift rider trucks. "verhead guards. Specification and testing
ISO 6072:2002
1ydraulic fluid power. &ompati$ility $etween fluids and standard elastomeric materials
ISO 6073:1997
Petroleum products. Prediction of the $ulk moduli of petroleum fluids used in hydraulic fluid
power systems
ISO 6099:2001
>luid power systems and components. &ylinders. !dentification code for mounting dimensions
and mounting types
ISO 6103:1999
Bonded a$rasive products. Permissi$le un$alances of grinding wheels as delivered. -esting
ISO 6107-3:1993
;ater =uality. 7oca$ulary. Part '
ISO 6107-8:1993
;ater =uality. 7oca$ulary. Part ,
ISO 6115:1997
Ship$uilding. -rawl winches
ISO 6133:1998
#u$$er and plastics. 3nalysis of multi-peak traces o$tained in determinations of tear strength
and adhesion strength
ISO 6142:2001
Gas analysis. Preparation of cali$ration gas mi/tures. Gravimetric method
ISO 6143:2001
Gas analysis. &omparison methods for determining and checking the composition of cali$ration
gas mi/tures
ISO 6144:2003
Gas analysis. Preparation of cali$ration gas mi/tures. Static volumetric method
ISO 6145-2:2001
Gas analysis. Preparation of cali$ration gas mi/tures using dynamic volumetric methods.
7olumetric pumps
ISO 6145-5:2001
Gas analysis. Preparation of cali$ration gas mi/tures using dynamic volumetric methods.
&apillary cali$ration devices
ISO 6145-6:2003
Gas analysis. Preparation of cali$ration gas mi/tures using dynamic volumetric methods. &ritical
orifices
ISO 6145-7:2001
Gas analysis. Preparation of cali$ration gas mi/tures using dynamic volumetric methods.
-hermal mass-flow controllers
ISO 6145-9:2001
Gas analysis. Preparation of cali$ration gas mi/tures using dynamic volumetric methods.
Saturation method
ISO 6145-10:2002
Gas analysis. Preparation of cali$ration gas mi/tures using dynamic volumetric methods.
Permeation method
ISO 6148:2001
Photography. 0icrographic films% spools and cores. Dimensions
ISO 6149-1:1993
&onnections for fluid power and general use. Ports and stud ends with !S" @*) threads and "-
ring sealing. Ports with "-ring in truncated housing
ISO 6149-2:1993
&onnections for fluid power and general use. Ports and stud ends with !S" @*) threads and "-
ring sealing. 1eavy-duty (S series) stud ends. Dimensions% design% test methods and
re=uirements.
ISO 6149-3:1993
&onnections for fluid power and general use. Ports and stud ends with !S" @*) threads and "-
ring sealing. 2ight-duty (2 series) stud ends. Dimensions% design% test methods and re=uirements
ISO 6155:1998
0achine tools. -est conditions for hori.ontal spindle turret and single spindle automatic lathes.
-esting of the accuracy
ISO 6162-1:2002
1ydraulic fluid power. >lange connectors with split or one-piece flange clamps and metric or
inch screws. >lange connectors for use at pressures of '%( 0Pa ('( $ar) to '( 0Pa ('(A $ar)% D?
)' to D? )@:
ISO 6162-2:2002
1ydraulic fluid power. >lange connectors with split or one-piece flange clamps and metric or
inch screws. >lange connectors for use at pressures of '( 0Pa ('(A $ar) to CA 0Pa (CAA $ar)%
D? )' to D? ()
ISO 6165:2002
<arth-moving machinery. Basic types. 7oca$ulary
ISO 6166:2001
Securities and related financial instruments. !nternational securities identification num$ering
system (!S!?)
ISO 6179:2001
#u$$er% vulcani.ed or thermoplastic. #u$$er sheets and ru$$er-coated fa$rics. Determination of
transmission rate of volatile li=uids (gravimetric techni=ue)
ISO 6185-1:2001
!nflata$le $oats. Boats with a ma/imum motor power rating of C%( k;
ISO 6185-2:2001
!nflata$le $oats. Boats with a ma/imum motor power rating of C.( k; to )( k; inclusive
ISO 6185-3:2001
!nflata$le $oats. Boats with ma/imum motor power rating of )( k; and greater
ISO 6186:1999
Plastics. Determination of poura$ility
ISO 6194-4:1999
#otary shaft lip type seals. Performance test procedures
ISO 6195:2002
>luid power systems and components. &ylinder-rod wiper-ring housings in reciprocating
applications. Dimensions and tolerances
ISO 6196-1:1993
0icrographics. 7oca$ulary. General terms
ISO 6196-2:1993
0icrographics. 7oca$ulary. !mage positions and methods of recording
ISO 6196-3:1997
0icrographics. 7oca$ulary. >ilm processing
ISO 6196-4:1998
0icrographics. 7oca$ulary. 0aterials and packaging
ISO 6196-5:1987
0icrographics. 7oca$ulary. 9uality of images% legi$ility% inspection
ISO 6196-6:1992
0icrographics. 7oca$ulary. <=uipment
ISO 6196-7:1992
0icrographics. 7oca$ulary. &omputer micrographics
ISO 6196-10:1999
0icrographics. 7oca$ulary. !nde/
ISO 6198:1993
0icrographics. #eaders for transparent microforms. Performance characteristics
ISO 6199:1991
0icrographics. 0icrofilming of documents on )* mm and '( mm silver-gelatin type microfilm.
"perating procedures
ISO 6200:1999
0icrographics. >irst generation silver-gelatin microforms of source documents. Density
specifications and method of measurement
ISO 6222:1999
;ater =uality. <numeration of cultura$le micro-organisms. &olony count $y inoculation in a
nutrient agar culture medium
ISO 6224:1997
Plastics hoses% te/tile-reinforced% for general-purpose water applications. Specification
ISO 6243:1997
&limatic data for $uilding design. Proposed system of sym$ols
ISO 6245:2001
Petroleum products. Determination of ash
ISO 6246:1998
Petroleum products. Gum content of light and middle distillate fuels. 5et evaporation method
ISO 6251:1998
2i=uid petroleum gases. &orrosiveness to copper. &opper strip test
ISO 6252:1998
Plastics. Determination of environmental stress cracking (<S&). &onstant-tensile-stress method
ISO 6259-1:2001
-hermoplastics pipes. Determination of tensile properties. General test method
ISO 6263:1997
1ydraulic fluid power. &ompensated flow-control valves. 0ounting surfaces
ISO 6264:1998
1ydraulic fluid power. Pressure-relief valves. 0ounting surfaces
ISO 6270-1:2001
Paints and varnishes. Determination of resistance to humidity. &ontinuous condensation
ISO 6272:1994
Paints and varnishes. >alling-weight test
ISO 6284:1999
&onstruction drawings. !ndication of limit deviations
ISO 6292:1996
Powered industrial trucks and tractors. Brake performance and component strength
ISO 6301-1:1997
Pneumatic fluid power. &ompressed air lu$ricators. 0ain characteristics to $e included in
supplierKs literature and product-marking re=uirements
ISO 6301-2:1997
Pneumatic fluid power. &ompressed air lu$ricators. -est methods to determine the main
characteristics to $e included in supplierKs literature
ISO 6320:2000
3nimal and vegeta$le fats and oils. Determination of refractive inde/
ISO 6321:2002
3nimal and vegeta$le fats and oils. Determination of melting point in open capillary tu$es (slip
point)
ISO 6326-3:1998
?atural gas. Determination of sulfur compounds. Determination of hydrogen sulfide% mercaptan
sulfur% and car$onyl sulfide sulfur $y potentiometry
ISO 6326-5:1998
?atural gas. Determination of sulfur compounds. 2ingener com$ustion method
ISO 6328:2000
Photography. Photographic materials. Determination of !S" resolving power
ISO 6330:2001
-e/tiles. Domestic washing and drying procedures for te/tile testing
ISO 6336-1:1996
&alculation of load capacity of spur and helical gears. Basic principles% introduction and general
influence factors
ISO 6336-2:1996
&alculation of load capacity of spur and helical gears. &alculation of surface dura$ility (pitting)
ISO 6336-3:1996
&alculation of load capacity of spur and helical gears. &alculation of tooth $ending strength
ISO 6336-5:2003
&alculation of load capacity of spur and helical gears. Strength and =uality of materials
ISO 6341:1996
;ater =uality. Biological methods. ;ater =uality. Determination of the inhi$ition of the mo$ility
of Daphnia magna Straus (&ladocera% &rustacea). 3cute to/icity test
ISO 6344-1:1998
&oated a$rasives. Grain si.e analysis. Grain si.e distri$ution test
ISO 6344-2:1998
&oated a$rasives. Grain si.e analysis. Determination of grain si.e distri$ution of macrogrits P)@
to P@@A
ISO 6344-3:1998
&oated a$rasives. Grain si.e analysis. Determination of grain si.e distri$ution of microgrits P@CA
to P@(AA
ISO 6346:1996
>reight containers. &oding% identification and marking
ISO 6348:1980
-e/tiles. Determination of mass. 7oca$ulary
ISO 6356:2000
-e/tile floor coverings. 3ssessment of static electrical propensity. ;alking test
ISO 6393:1998
3coustics. 0easurement of e/terior noise emitted $y earth-moving machinery. Stationary test
conditions
ISO 6394:1998
3coustics. 0easurement at the operatorKs position of noise emitted $y earth-moving machinery.
Stationary test conditions
ISO 6402-1:2002
Plastics. !mpact resistant acrylonitrilestyrene moulding and e/trusion materials (3S3% 3<S%
3&S)% e/cluding $utadiene-modified materials. Designation system and $asis for specifications
ISO 6402-2:1999
Plastics. !mpact resistant acrylonitrilestyrene moulding and e/trusion materials (3S3% 3<S%
3&S)% e/cluding $utadiene-modified materials. Preparation of test specimens and determination
of properties
ISO 6410-1:1996
-echnical drawings. Screw threads and threaded parts. General conventions
ISO 6410-2:1996
-echnical drawings. Screw threads and threaded parts. Screw thread inserts
ISO 6410-3:1996
-echnical drawings. Screw threads and threaded parts. Simplified representation
ISO 6411:1997
-echnical drawings. Simplified representation of centre holes
ISO 6412-1:1995
-echnical drawings. Simplified representation of pipelines. General rules and orthogonal
representation
ISO 6412-2:1995
-echnical drawings. Simplified representation of pipelines. !sometric pro+ection
ISO 6412-3:1996
-echnical drawings. Simplified representation of pipelines. -erminal features of ventilation and
drainage systems
ISO 6413:1995
-echnical drawings. #epresentation of splines and serrations
ISO 6414:1995
-echnical drawings for glassware
ISO 6426-2:2002
1orological voca$ulary. -echnical and commercial definitions
ISO 6427:1999
Plastics. Determination of matter e/tracta$le $y organic solvents (conventional methods)
ISO 6428:1999
-echnical drawings. #e=uirements for microcopying
ISO%IEC 6429:1992
!nformation technology. &ontrol functions for coded character sets
ISO 6431:1992
Pneumatic fluid power. Single rod cylinders% ) AAA kPa ()A $ar) series% with detacha$le
mountings% $ores from '@ mm to '@A mm. 0ounting dimensions
ISO 6432:1985
Pneumatic fluid power. Single rod cylinders. )A $ar () AAA kPa) series. Bores from , to @( mm.
0ounting dimensions
ISO 6433:1995
-echnical drawings. !tem references
ISO 6446:1994
#u$$er products. Bridge $earings. Specification for ru$$er materials
ISO 6468:1997
;ater =uality. Determination of certain organochlorine insecticides% polychlorinated $iphenyls
and chloro$en.enes. Gas chromatographic method after li=uid-li=uid e/traction
ISO 6489-1:2001
3gricultural vehicles. 0echanical connections $etween towed and towing vehicles. Dimensions
of hitch-hooks
ISO 6489-2:2002
3gricultural vehicles. 0echanical connections $etween towed and towing vehicles.
Specifications for clevis coupling CA
ISO 6497:2002
3nimal feeding stuffs. Sampling
ISO 6506-1:1999
0etallic materials. Brinell hardness test. -est method
ISO 6506-2:1999
0etallic materials. Brinell hardness test. 7erification and cali$ration of Brinell hardness testing
machines
ISO 6506-3:1999
0etallic materials. Brinell hardness test. &ali$ration of reference $locks
ISO 6507-1:1998
0etallic materials. 7ickers hardness test. -est method
ISO 6507-2:1998
0etallic materials. 7ickers hardness test. 7erification of testing machines
ISO 6507-3:1998
0etallic materials. 7ickers hardness test. &ali$ration of reference $locks
ISO 6508-1:1999
0etallic materials. #ockwell hardness test. -est method (scales 3% B% &% D% <% >% G% 1% G% ?% -)
ISO 6508-2:1999
0etallic materials. #ockwell hardness test. 7erification and cali$ration of testing machines
(scales 3% B% &% D% <% >% G% 1% G% ?% -)
ISO 6508-3:1999
0etallic materials. #ockwell hardness test. &ali$ration of reference $locks (scales 3% B% &% D% <%
>% G% 1% G% ?% -)
ISO 6509:1995
&orrosion of metals and alloys. Determination of de.incification resistance of $rass
ISO 6518-1:2002
#oad vehicles. !gnition systems. 7oca$ulary
ISO 6520-1:1998
;elding and allied processes. &lassification of geometric imperfections in metallic materials.
>usion welding
ISO 6520-2:2002
;elding and allied processes. &lassification of geometric imperfections in metallic materials.
;elding with pressure
ISO%IEC 6522:1992
!nformation technology. Programming languages. P2! general purpose su$set
ISO%IEC 6523-1:1998
!nformation technology. Structure for the identification of organi.ations and organi.ation parts.
!dentification of organi.ation identification schemes
ISO%IEC 6523-2:1998
!nformation technology. Structure for the identification of organi.ations and organi.ation parts.
#egistration of organi.ation identification schemes
ISO 6529:2001
Protective clothing. Protection against chemicals. Determination of resistance of protective
clothing materials to permeation $y li=uids and gases
ISO 6531:1999
0achinery for forestry. Porta$le hand-held chain-saws. 7oca$ulary
ISO 6533:2001
>orestry machinery. Porta$le chain-saw front hand-guard. Dimensions and clearances
ISO 6547:1981
1ydraulic fluid power. &ylinders. Piston seal housings incorporating $earing rings. Dimensions
and tolerances
ISO 6549:1999
#oad vehicles. Procedure for 1- and #-point determination
ISO 6550-3:2002
#oad vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing.
0)A glow-plugs
ISO 6551:1996
Petroleum li=uids and gases. >idelity and security of dynamic measurement. &a$led transmission
of electric andor electronic pulsed data
ISO 6570:2001
?atural gas. Determination of potential hydrocar$on li=uid content. Gravimetric methods
ISO 6579:2002
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the detection of
Salmonella spp
ISO%IEC 6592:2000
!nformation technology. Guidelines for the documentation of computer-$ased application
systems
ISO 6603-1:2000
Plastics. Determination of multi-a/ial impact $ehaviour of rigid plastics. ?on-instrumented
impact testing
ISO 6603-2:2000
Plastics. Determination of multi-a/ial impact $ehaviour of rigid plastics. !nstrumented puncture
testing
ISO 6605:2002
1ydraulic fluid power. 1oses and hose assem$lies. -est methods
ISO 6644:2002
>lowing cereals and milled cereal products. 3utomatic sampling $y mechanical means
ISO 6646:2000
#ice. Determination of the potential milling yield from paddy and husked rice
ISO 6656:2002
3nimal and vegeta$le fats and oils. Determination of polyethylene-type polymers
ISO 6670:2002
!nstant coffee. Sampling method for $ulk units with liners
ISO 6673:2003
Green coffee. Determination of loss in mass at )A(BAD&
ISO 6682:1995
<arth-moving machinery. 4ones of comfort and reach for controls
ISO 6683:2000
<arth-moving machinery. Seat $elts and seat $elt anchorages
ISO 6686:1995
<=uipment for crop protection. 3nti-drip devices. Determination of performance
ISO 6690:1996
0ilking machine installations. 0echanical tests
ISO 6708:1996
Pipework components. Definition and selection of D? (nominal si.e)
ISO 6710:1995
Single-use containers for venous $lood specimen collection
ISO 6721-1:2002
Plastics. Determination of dynamic mechanical properties. General principles
ISO 6721-2:1996
Plastics. Determination of dynamic mechanical properties. -orsion-pendulum method
ISO 6721-3:1996
Plastics. Determination of dynamic mechanical properties. >le/ural vi$ration. #esonance-curve
method
ISO 6721-10:1999
Plastics. Determination of dynamic mechanical properties. &omple/ shear viscosity using a
parallel-plate oscillatory rheometer
ISO 6741-1:1989
-e/tiles. >i$res and yarns. Determination of commercial mass of consignments. 0ass
determination and calculations
ISO 6741-2:1987
-e/tiles. >i$res and yarns. Determination of commercial mass of consignments. 0ethods for
o$taining la$oratory samples
ISO 6741-3:1987
-e/tiles. >i$res and yarns. Determination of commercial mass of consignments. Specimen
cleaning procedures
ISO 6743-1:2002
2u$ricants% industrial oils and related products (class 2). &lassification. >amily 3 (-otal loss
systems)
ISO 6743-4:2001
2u$ricants% industrial oils and related products (class 2). &lassification. >amily 1 (hydraulic
systems)
ISO 6743-99:2002
2u$ricants% industrial oils and related products (class 2). &lassification. General
ISO 6746-1:2003
<arth-moving machinery. Definitions of dimensions and codes. Base machine
ISO 6746-2:2003
<arth-moving machinery. Definitions of dimensions and codes. <=uipment and attachments
ISO 6751:1998
-ools for moulding. <+ector pins with cylindrical head
ISO 6753-2:1998
-ools for pressing and moulding. 0achined plates. 0achined plates for moulds
ISO 6768:1998
3m$ient air. Determination of mass concentration of nitrogen dio/ide. 0odified Griess-
Salt.man method
ISO 6780:1988
General-purpose flat pallets for through transit of goods. Principal dimensions and tolerances
ISO 6787:2001
3ssem$ly tools for screws and nuts. 3d+usta$le wrenches
ISO 6789:2003
3ssem$ly tools for screws and nuts. 1and tor=ue tools. #e=uirements and test methods for
design conformance testing% =uality conformance testing and recali$ration procedure
ISO 6798:1995
#eciprocating internal com$ustion engines. 0easurement of emitted air$orne noise. <ngineering
method and survey method
ISO 6800:1998
3nimal and vegeta$le fats and oils. Determination of the composition of fatty acids in the @-
position of the triglyceride molecules
ISO 6803:1997
#u$$er or plastics hoses and hose assem$lies. 1ydraulic-pressure impulse test without fle/ing
ISO 6805:1994
#u$$er hoses and hose assem$lies for underground mining. ;ire-reinforced hydraulic types for
coal mining. Specification
ISO 6806:1996
#u$$er hoses and hose assem$lies for use in oil $urners. Specification
ISO 6808:2001
Plastics hoses and hose assem$lies for suction and low-pressure discharge of petroleum li=uids.
Specification
ISO &' 6809:1996
#u$$er compounding ingredients. &ar$on $lack. Standard reference $lacks
ISO 6811:1998
Spherical plain $earings. 7oca$ulary
ISO 6813:1998
#oad vehicles. &ollision classification. -erminology
ISO 6817:1997
0easurement of conductive li=uid flow in closed conduits. 0ethod using electromagnetic
flowmeters
ISO 6846:1992
Photography. Black and white continuous tone papers. Determination of !S" speed and !S"
range for printing
ISO 6847:2001
;elding consuma$les. Deposition of a weld metal pad for chemical analysis
ISO 6849:1996
Photography. Processing wastes. Determination of $oron
ISO 6851:2001
Photography. Processing waste. Determination of total amino nitrogen (microdiffusion G+eldahl
method)
ISO 6853:2001
Photography. Processing waste. Determination of ammoniacal nitrogen (microdiffusion method)
ISO 6860:1995
Paints and varnishes. Bend test (conical mandrel)
ISO 6861:1996
!nformation and documentation. Glagolitic alpha$et coded character set for $i$liographic
information interchange
ISO 6867:2001
3nimal feeding stuffs. Determination of vitamin < content. 0ethod using high-performance
li=uid chromatography
ISO 6869:2001
3nimal feeding stuffs. Determination of the contents of calcium% copper% iron% magnesium%
manganese% potassium% sodium and .inc. 0ethod using atomic a$sorption spectrometry
ISO 6870:2002
3nimal feeding stuffs. 9ualitative determination of .earalenone
ISO 6871-1:1997
Dental $ase metal casting alloys. &o$alt-$ased alloys
ISO 6871-2:1997
Dental $ase metal casting alloys. ?ickel-$ased alloys
ISO 6872:1999
Dental ceramic
ISO 6873:2000
Dental gypsum products
ISO 6875:1997
Dental e=uipment. Dental patient chair
ISO 6876:2002
Dental root canal sealing materials
ISO 6877:1998
Dental root-canal o$turating points
ISO 6879:1995
3ir =uality. Performance characteristics and related concepts for air =uality measuring methods
ISO 6885:2001
3nimal and vegeta$le fats and oils. Determination of anisidine value
ISO 6887-1:1999
0icro$iology of food and animal feeding stuffs. Preparation of test samples% initial suspension
and decimal dilutions for micro$iological e/amination. General rules for the preparation of the
initial suspension and decimal dilutions
ISO 6887-2:2003
0icro$iology of food and animal feeding stuffs. Preparation of test samples% initial suspension
and decimal dilutions for micro$iological e/amination. Specific rules for the preparation of meat
and meat products
ISO 6887-3:2003
0icro$iology of food and animal feeding stuffs. Preparation of test samples% initial suspension
and decimal dilutions for micro$iological e/amination. Specific rules for the preparation of fish
and fishery products
ISO 6887-4:2003
0icro$iology of food and animal feeding stuffs. Preparation of test samples% initial suspension
and decimal dilutions for micro$iological e/amination. Specific rules for the preparation of
products other than milk and milk products% meat and meat products% and fish and fishery
products
ISO 6888-1:1999
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of
coagulase-positive staphylococci (B:!Staphylococcus aureusB:# and other species). -echni=ue
using Baird-Parker agar medium
ISO 6888-2:1999
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of
coagulase-positive staphylococci (B:!Staphylococcus aureusB:# and other species). -echni=ue
using ra$$it plasma fi$rinogen agar medium
ISO 6888-3:2003
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of
coagulase-positive staphylococci (B:!Staphylococcus aureusB:# and other species). Detection
and 0P? techni=ue for low num$ers
ISO 6916-1:1995
>le/i$le cellular polymeric materials. Sponge and e/panded cellular ru$$er products.
Specification. Sheeting
ISO 6926:2001
3coustics. #e=uirements for the performance and cali$ration of reference sound sources for the
determination of sound power levels
ISO 6939:1988
-e/tiles. Farns from packages. 0ethod of test for $reaking strength of yarn $y the skein method
ISO 6940:1995
-e/tile fa$rics. Burning $ehaviour. Determination of ease of ignition of vertically oriented
specimens
ISO 6941:1995
-e/tile fa$rics. Burning $ehaviour. 0easurement of flame spread properties of vertically
oriented specimens
ISO 6942:2002
Protective clothing. Protection against heat and fire. 0ethod of test6 <valuation of materials and
material assem$lies when e/posed to a source of radiant heat
ISO 6945:1996
#u$$er hoses. Determination of a$rasion resistance of the outer cover
ISO 6946:1997
Building components and $uilding elements. -hermal resistance and thermal transmittance.
&alculation method
ISO 6947:1997
;elds. ;orking positions. Definitions of angles of slope and rotation
ISO 6953-1:2000
Pneumatic fluid power. &ompressed air pressure regulators and filter-regulators. 0ain
characteristics to $e included in literature from suppliers and product-marking re=uirements
ISO 6953-2:2000
Pneumatic fluid power. &ompressed air pressure regulators and filter-regulators. -est methods to
determine the main characteristics to $e included in literature from suppliers
ISO 6954:2000
0echanical vi$ration. Guidelines for the measurement% reporting and evaluation of vi$ration
with regard to ha$ita$ility on passenger and merchant ships
ISO 6971:2002
&ranked-link drag chains of welded construction% attachments and sprockets
ISO 6972:2002
&ranked-link mill chains of welded construction% attachments and sprockets
ISO 6974-1:2001
?atural gas. Determination of composition with defined uncertainty $y gas chromatography.
Guidelines for tailored analysis
ISO 6974-2:2002
?atural gas. Determination of composition with defined uncertainty $y gas chromatography.
0easuring-system characteristics and statistics for processing of data
ISO 6974-3:2001
?atural gas. Determination of composition with defined uncertainty $y gas chromatography.
Determination of hydrogen% helium% o/ygen% nitrogen% car$on dio/ide and hydrocar$ons up to &,
using two packed columns
ISO 6974-4:2001
?atural gas. Determination of composition with defined uncertainty $y gas chromatography.
Determination of nitrogen% car$on dio/ide and &) to &( and &*M hydrocar$ons for a la$oratory
and on-line measuring system using two columns
ISO 6974-5:2001
?atural gas. Determination of composition with defined uncertainty $y gas chromatography.
Determination of nitrogen% car$on dio/ide and &) to &( and &*M hydrocar$ons for a la$oratory
and on-line process application using three columns
ISO 6974-6:2002
?atural gas. Determination of composition with defined uncertainty $y gas chromatography.
Determination of hydrogen% helium% o/ygen% nitrogen% car$on dio/ide and &Bd) to &Bd,
hydrocar$ons using three capillary columns
ISO 6980:1996
Specification for reference $eta radiations for cali$rating dosimeters and dose-rate meters and for
determining their response as a function of $eta-radiation energy
ISO 6981:1992
1ydraulic fluid power. &ylinders. #od end plain eyes. 0ounting dimensions
ISO 6982:1992
1ydraulic fluid power. &ylinders. #od end spherical eyes. 0ounting dimensions
ISO 6988:1995
0etallic and other non-organic coatings. Sulfur dio/ide test with general condensation of
moisture
ISO 6989:1981
-e/tiles fi$res. Determination of length and length distri$ution of staple fi$res ($y measurement
of single fi$res)
ISO 7004 to ISO 7998
ISO 7004:2002
Photography. !ndustrial radiographic films. Determination of !S" speed% !S" average gradient
and !S" gradients G@ and GC when e/posed to 8- and gamma-radiation
ISO 7026:1997
Diesel engines. Screw-in in+ection no..le holders% types @A% @)% @).) and @: for pintle no..le si.e
KS)K type KBK
ISO 7027:2000
;ater =uality. Determination of tur$idity
ISO 7029:2000
3coustics. Statistical distri$ution of hearing thresholds as a function of age
ISO 7040:1998
Prevailing tor=ue type he/agon nuts (with non-metallic insert)% style ). Property classes (% , and
)A
ISO 7041:2002
Prevailing tor=ue type he/agon nuts (with non-metallic insert)% style @. Property classes E and )@
ISO 7042:1998
Prevailing tor=ue type all-metal he/agon nuts. Property classes (% ,% )A and )@
ISO 7045:1995
Pan head screws with type 1 or type 4 cross recess. Product grade 3
ISO 7046-1:1994
&ountersunk flat head screws (common head style) with type 1 or type 4 cross recess. Product
grade 3. &ountersunk flat head screws (common head style) with type 1 or type 4 cross recess.
Product grade 3. Steel property class C.,
ISO 7046-2:1995
&ountersunk flat head screws (common head style) with type 1 or type 4 cross recess. Product
grade 3. Steel of property class ,.,% stainless steel and non-ferrous metals
ISO 7047:1995
&ountersunk raised head screws (common head style) with type 1 or type 4 cross recess.
Product grade 3
ISO 7048:1999
&ross recessed cheese head screws
ISO 7049:1995
&ross recessed pan head tapping screws
ISO 7050:1995
Specification for cross-recessed countersunk (flat) head tapping screws (common head style)
ISO 7051:1995
Specification for cross-recessed raised countersunk (oval) head tapping screws
ISO%IEC 7064:2003
!nformation technology. Security techni=ues. &heck character systems
ISO &' 7066-1:1997
3ssessment of uncertainty in cali$ration and use of flow measurement devices. 2inear
cali$ration relationships
ISO 7083:1995
-echnical drawings. Sym$ols for geometrical tolerancing. Proportions and dimensions
ISO 7085:1999
0echanical and performance re=uirements of case hardened and tempered metric thread rolling
screws
ISO 7089:2000
Plain washers. ?ormal series. Product grade 3
ISO 7090:2000
Plain washers% chamfered. ?ormal series. Product grade 3
ISO 7091:2000
Plain washers. ?ormal series. Product grade &
ISO 7092:2000
Plain washers. Small series. Product grade 3
ISO 7093-1:2000
Plain washers. 2arge series. Product grade 3
ISO 7093-2:2000
Plain washers. 2arge series. Product grade &
ISO 7094:2000
Plain washers. </tra large series. Product grade &
ISO 7096:2000
<arth-moving machinery. 2a$oratory evaluation of operator seat vi$ration
ISO 7112:1999
0achinery for forestry. Porta$le hand-held $rush-cutters and grass-trimmers. 7oca$ulary
ISO 7113:1999
Porta$le hand-held forestry machines. &utting attachments for $rush cutters. Single piece metal
$lades
ISO 7148-1:1999
Plain $earings. -esting of tri$ological $ehaviour of $earing materials. -esting of $earing metals
ISO 7148-2:1999
Plain $earings. -esting of tri$ological $ehaviour of $earing materials. -esting of polymer-$ased
$earing materials
ISO 7153-1:2001
Surgical instruments. 0etallic materials. Stainless steel
ISO 7176-1:1999
;heelchairs. Determination of static sta$ility
ISO 7176-2:2001
;heelchairs. Determination of dynamic sta$ility of electric wheelchairs
ISO 7176-3:2003
;heelchairs. Determination of effectiveness of $rakes
ISO 7176-4:1997
;heelchairs. <nergy consumption of electric wheelchairs and scooters for determination of
theoretical distance range
ISO 7176-6:2001
;heelchairs. Determination of ma/imum speed% acceleration and deceleration of electric
wheelchairs
ISO 7176-8:1998
;heelchairs. #e=uirements and test methods for static% impact and fatigue strengths
ISO 7176-9:2001
;heelchairs. &limatic tests for electric wheelchairs
ISO 7176-14:1997
;heelchairs. Power and control systems for electric wheelchairs. #e=uirements and test methods
ISO 7176-15:1996
;heelchairs. #e=uirements for information disclosure% documentation and la$elling
ISO 7176-16:1997
;heelchairs. #esistance to ignition of upholstered parts. #e=uirements and test methods
ISO 7176-21:2003
;heelchairs. #e=uirements and test methods for electromagnetic compati$ility of electrically
powered wheelchairs and motori.ed scooters
ISO 7176-22:2000
;heelchairs. Set-up procedures
ISO 7180:1986
Pneumatic fluid power. &ylinders. Bore and port thread si.es
ISO 7181:1991
1ydraulic fluid power. &ylinders. Bore and rod area ratios
ISO 7187:1995
Photography. 0aterials for direct-positive colour-print cameras. Determination of !S" speed
ISO 7197:1997
?eurosurgical implants. Sterile% single-use hydrocephalus shunts and components
ISO 7198:1998
&ardiovascular implants. -u$ular vascular prostheses
ISO 7200:1984
-echnical drawing. -itle $locks
ISO 7206-4:2002
!mplants for surgery. Partial and total hip +oint prostheses. Determination of endurance properties
of stemmed femoral components
ISO 7208:2000
Skimmed milk% whey and $uttermilk. Determination of fat content. Gravimetric method
(reference method)
ISO 7211-3:1984
-e/tiles. ;oven fa$rics. &onstruction. 0ethods of analysis. Determination of crimp of yarn in
fa$ric
ISO 7211-4:1984
-e/tiles. ;oven fa$rics. &onstruction. 0ethods of analysis. Determination of twist in yarn
removed from fa$ric
ISO 7211-5:1984
-e/tiles. ;oven fa$rics. &onstruction. 0ethods of analysis. Determination of linear density of
yarn removed from fa$ric
ISO 7214:2002
&ellular plastics. Polyethylene. 0ethods of test
ISO 7215:1995
!ron ores. Determination of relative reduci$ility
ISO 7229:1997
#u$$er- or plastics-coated fa$rics. 0easurements of gas permea$ility
ISO 7231:1998
Polymeric materials% cellular fle/i$le. 0ethod of assessment of air flow value at constant
pressure-drop
ISO 7233:1995
#u$$er and plastics hoses and hose assem$lies. Determination of suction resistance
ISO 7235:2003
3coustics. 2a$oratory measurement procedures for ducted silencers and air-terminal units.
!nsertion loss% flow noise and total pressure loss
ISO 7241-2:2000
1ydraulic fluid power. 9uick-action couplings. -est methods
ISO 7250:1998
Basic human $ody measurements for technological design
ISO 7253:2001
Paints and varnishes. Determination of resistance to neutral salt spray (fog)
ISO 7263:1995
&orrugating medium. Determination of the flat crush resistance after la$oratory fluting
ISO 7278-1:1996
2i=uid hydrocar$ons. Dynamic measurement. Proving systems for volumetric meters. General
principles
ISO 7278-2:1996
2i=uid hydrocar$ons. Dynamic measurement. Proving systems for volumetric meters. Pipe
provers
ISO 7278-3:1998
2i=uid hydrocar$ons. Dynamic measurement. Proving systems for volumetric meters. Pulse
interpolation techni=ues
ISO 7278-4:1999
2i=uid hydrocar$ons. Dynamic measurement. Proving systems for volumetric meters. Guide for
operators of pipe provers
ISO 7284:1996
#esistance welding e=uipment. Particular specifications applica$le to transformers with two
separate secondary windings for multi-spot welding as used in the automo$ile industry
ISO 7287:2002
Graphical sym$ols for thermal cutting e=uipment
ISO 7291:2001
Gas welding e=uipment. Pressure regulators for manifold systems used in welding% cutting and
allied processes up to 'AA $ar
ISO 7299:1996
Diesel engines. <nd-mounting flanges for fuel in+ection pumps
ISO 7314:2002
3erospace. >luid systems. 0etal hose assem$lies
ISO 7322:2000
&omposition cork. -est methods
ISO 7327:1997
Plastics. 1ardeners and accelerators for epo/ide resins. Determination of free acid in acid
anhydride
ISO 7328:2000
0ilk $ased edi$le ices and ice mi/es. Determination of fat content. Gravimetric method
(#eference method)
ISO 7341:2000
Banking. ?ostro accounts reconciliation
ISO 7343:1993
&inematography. -wo-track photographic sound records on '( mm motion-picture prints.
Positions and width dimensions
ISO 7345:1996
-hermal insulation. Physical =uantities and definitions
ISO 7346-1:1998
;ater =uality. Determination of the acute lethal to/icity of su$stances to a freshwater fish
IB:!Brachydanio rerioB:# 1amilton-Buchanan (-eleostei% &yprinidae)J. Static method
ISO 7346-2:1998
;ater =uality. Determination of the acute lethal to/icity of su$stances to a freshwater fish
IB:!Brachydanio rerioB:# 1amilton-Buchanan (-eleostei% &yprinidae)J. Semi-static method
ISO 7346-3:1998
;ater =uality. Determination of the acute lethal to/icity of su$stances to a freshwater fish
IB:!Brachydanio rerioB:# 1amilton-Buchanan (-eleostei% &yprinidae)J. >low-through method
ISO 7348:1992
Glass containers. 0anufacture. 7oca$ulary
ISO%IEC 7350:1991
!nformation technology. #egistration of repertoires of graphic characters from !S"!<& )A'*:
ISO 7371:1996
1ousehold refrigerating appliances. #efrigerators with or without low temperature compartment.
&haracteristics and test methods
ISO 7380:1998
1e/agon socket $utton head screws
ISO 7384:1995
&orrosion tests in artificial atmospheres. General re=uirements
ISO 7391-1:2000
Plastics. Polycar$onate (P&) moulding and e/trusion materials. Designation system and $asis for
specifications
ISO 7391-2:2000
Plastics. Polycar$onate (P&) moulding and e/trusion materials. Preparation of test specimens
and determination of properties
ISO 7393-1:2000
;ater =uality. Determination of free chlorine and total chlorine. -itrimetric method using
B:!?%?B:#-diethyl-)%C-phenylenediamine
ISO 7393-2:2000
;ater =uality. Determination of free chlorine and total chlorine. &olorimetric method using
B:!?%?B:#-diethyl-)%C-phenylenediamine for routine control purposes
ISO 7393-3:2000
;ater =uality. Determination of free chlorine and total chlorine. !odometric titration method for
the determination of total chlorine
ISO 7401:2003
#oad vehicles. 2ateral transient response test methods. "pen-loop test methods
ISO 7405:1997
Dentistry. Preclinical evaluation of $iocompati$ility of medical devices used in dentistry. -est
methods for dental materials
ISO 7425-1:1988
1ydraulic fluid power. 1ousing for elastomer-energi.ed% plastic-faced seals. Dimensions and
tolerances. Piston seal housings
ISO 7425-2:1989
1ydraulic fluid power. 1ousing for elastomer-energi.ed% plastic-faced seals. Dimensions and
tolerances. #od seal housings
ISO 7437:1996
-echnical drawings. &onstruction drawings. General rules for e/ecution of production drawings
for prefa$ricated structural components
ISO 7438:2000
0etallic materials. Bend test
ISO 7439:2002
&opper-$earing intra-uterine contraceptive devices. #e=uirements% tests
ISO 7441:1995
&orrosion of metals and alloys. Determination of $imetallic corrosion in outdoor e/posure
corrosion tests
ISO%&' 7470:1988
7alve outlets for gas cylinders. 2ist of provisions which are either standardi.ed or in use
ISO 7475:2002
0echanical vi$ration. Balancing machines. <nclosures and other protective measures for the
measuring station
ISO%IEC 7480:1991
!nformation technology. -elecommunications and information e/change $etween systems. Start-
stop transmission signal =uality at D-<D&< interfaces
ISO%IEC 7487-1:1995
!nformation technology. Data interchange on )'Amm ((%@( in) fle/i$le disk cartridges using
modified fre=uency modulation recording at : E(, ftprad% )%E tpmm (C, tpi)% on $oth sides. !S"
type @A@. Dimensional% physical and magnetic characteristics
ISO 7488:1996
Dental amalgamators
ISO 7490:2001
Dental gypsum-$onded casting investments
ISO 7491:2000
Dental materials. Determination of colour sta$ility
ISO 7492:1998
Dental e/plorers
ISO 7493:2000
Dental operatorKs stool
ISO 7494:1998
Dental units
ISO 7494-2:2003
Dentistry. Dental units. ;ater and air supply
ISO 7500-1:1999
0etallic materials. 7erification of static unia/ial testing machines. -ensioncompression testing
machines. 7erification and cali$ration of the force-measuring system
ISO 7500-2:1999
0etallic materials. 7erification of static unia/ial testing machines. -ension creep testing
machines. 7erification of the applied load
ISO%IEC 7501-3:1997
!dentification cards. 0achine reada$le travel documents. 0achine reada$le official travel
documents
ISO 7504:2001
Gas analysis. 7oca$ulary
ISO 7507-5:2000
Petroleum and li=uid petroleum products. &ali$ration of vertical cylindrical tanks. </ternal
electro-optical distance-ranging method
ISO 7518:1999
&onstruction drawings. Simplified representation of demolition and re$uilding
ISO 7519:1997
-echnical drawings. &onstruction drawings. General principles of presentation for general
arrangement and assem$ly drawings
ISO 7536:1996
0ethods of test for petroleum and its products. Petroleum products. Determination of o/idation
sta$ility of gasoline. !nduction period method
ISO 7539-1:1995
&orrosion of metals and alloys. Stress corrosion testing. General guidance on testing procedures
ISO 7539-2:1995
&orrosion of metals and alloys. Stress corrosion testing. Preparation and use of $ent-$eam
specimens
ISO 7539-3:1995
&orrosion of metals and alloys. Stress corrosion testing. Preparation and use of D-$end
specimens
ISO 7539-4:1995
&orrosion of metals and alloys. Stress corrosion testing. Preparation and use of unia/ially loaded
tension specimens
ISO 7539-5:1995
&orrosion of metals and alloys. Stress corrosion testing. 0ethod for the preparation and use of
&-ring specimens
ISO 7539-6:2003
&orrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked
specimens for tests under constant load or constant displacement
ISO 7539-7:1995
&orrosion of metals and alloys. Stress corrosion testing. Slow strain rate testing
ISO 7539-8:2000
&orrosion of metals and alloys. Stress corrosion testing. Preparation and use of specimens to
evaluate weldments
ISO 7539-9:2003
&orrosion of metals and alloys. Stress corrosion testing. Preparation and use of pre-cracked
specimens for tests under rising load or rising displacement
ISO 7547:2002
Ships and marine technology. 3ir-conditioning and ventilation of accommodation spaces. Design
conditions and $asis of calculations
ISO 7551:1998
Dental a$sor$ent points
ISO 7565:1993
0icrographics. #eaders for transparent microforms. 0easurement of characteristics
ISO 7573:1983
-echnical drawings. !tem list
ISO 7579:1997
Dyestuffs. Determination of solu$ility of dyestuffs in organic solvents. Gravimetric method
ISO 7588-1:1998
#oad vehicles. <lectricalelectronic switching devices. #elays and flashers
ISO 7588-2:1998
#oad vehicles. <lectricalelectronic switching devices. <lectronic devices
ISO 7588-3:1998
#oad vehicles. <lectricalelectronic switching devices. 0icrorelays
ISO 7589:2002
Photography. !lluminants for sensitometry. Specifications for daylight% incandescent tungsten
and printer
ISO 7590:2001
Steel cord conveyor $elts. 0ethods for the determination of total thickness and cover thickness
ISO 7612:1994
Diesel engines. Base-mounted in-line fuel in+ection pumps. 0ounting dimensions
ISO 7617-1:2001
Plastics-coated fa$rics for upholstery. Specification for P7&-coated knitted fa$rics
ISO 7622-1:1996
Steel cord conveyor $elts. 2ongitudinal traction test. 0easurement of elongation
ISO 7622-2:1996
Steel cord conveyor $elts. 2ongitudinal traction test. 0easurement of tensile strength
ISO 7623:1997
Steel cord conveyor $elts. &ord-to-coating $ond test. !nitial test and after thermal treatment
ISO 7654:1998
#oad vehicles. Spin-on fuel filters for diesel engines. 0ounting and connecting dimensions
ISO 7660:1983
<ssential oils. Determination of ester value of oils containing difficult-to-saponify esters
ISO 7662:1996
#u$$er and plastics hoses. Determination of a$rasion of lining
ISO 7711-1:1998
Dental rotary instruments. Diamond instruments. Dimensions% re=uirements% marking and
packaging
ISO 7711-2:1996
Dental rotary instruments. Diamond instruments. Discs
ISO 7711-3:1996
Dental rotary instruments. Diamond instruments. Grit si.es% designation and colour code
ISO 7719:1998
Prevailing tor=ue type all-metal he/agon nuts% style ). Property classes (% , and )A
ISO 7720:1997
Prevailing tor=ue type all-metal he/agon nuts% style @. Property class E
ISO 7721-2:1995
&ountersunk flat head screws. Penetration depth of cross recesses
ISO 7726:2001
<rgonomics of the thermal environment. !nstruments for measuring physical =uantities
ISO 7730:1995
0oderate thermal environments. Determination of the P07 and PPD indices and specification
of the conditions for thermal comfort
ISO 7738:2001
3ssem$ly tools for screws and nuts. &om$ination wrenches. 2engths of wrenches and ma/imum
thickness of heads
ISO 7751:1997
#u$$er and plastics hoses and hose assem$lies. #atios of proof and $urst pressure to design
working pressure
ISO 7760:2001
Photography. Processing waste. Determination of hydro=uinone
ISO 7766:2003
Processing photographic wastes. 3nalysis of cyanides. Determination of he/acyanoferrate(!!)
and he/acyanoferrate(!!!) $y spectrometry
ISO 7772-1:1998
3ssessment of industrial laundry machinery $y its effect on te/tiles. ;ashing machines
ISO 7772-2:1996
3ssessment of industrial laundry machinery $y its effect on te/tiles. </tracting machines
ISO 7772-3:1996
3ssessment of industrial laundry machinery $y its effect on te/tiles. >latwork-ironing machines
ISO 7772-4:1996
3ssessment of industrial laundry machinery $y its effect on te/tiles. Batch-drying tum$lers
ISO 7779:2001
3coustics. 0easurement of air$orne noise emitted $y information technology and
telecommunications e=uipment
ISO 7780:1998
#u$$er and ru$$er latices. Determination of manganese content. Sodium periodate photometric
methods
ISO 7781:2001
Styrene-$utadiene ru$$er% raw. Determination of soap and organic acid content
ISO 7783-1:2000
Paints and varnishes. &oating materials and coating systems for e/terior masonry and concrete.
Determination of water-vapour transmission rate of free films (dish method)
ISO 7783-2:1999
Paints and varnishes. &oating materials and coating systems for e/terior masonry and concrete.
Determination and classification of water-vapour transmission rate (permea$ility)
ISO 7785-1:1999
Dental handpieces. 1igh-speed air tur$ine handpieces
ISO 7785-2:1998
Dental handpieces. Straight and geared angle handpieces
ISO 7786:2001
Dental rotary instruments. 2a$oratory a$rasive instruments
ISO 7787-2:2001
Dental rotary instruments. &utters. &ar$ide la$oratory cutters
ISO 7787-4:2002
Dental rotary instruments. &utters. 0iniature car$ide la$oratory cutters
ISO 7789:1998
1ydraulic fluid power. -wo-% three- and four-port screw-in cartridge valves. &avities
ISO 7790:1997
1ydraulic fluid power. >our-port modular stack valves and four-port directional control valves%
si.es A@% A' and A(. &lamping dimensions
ISO 7792-1:1997
Plastics. -hermoplastic polyester (-P) moulding and e/trusion materials. Designation system
and $asis for specifications
ISO 7792-2:1997
Plastics. -hermoplastic polyester (-P) moulding and e/trusion materials. Preparation of test
specimens and determination of properties
ISO 7799:2000
0etallic materials. Sheet and strip ' mm thick or less. #everse $end test
ISO 7800:2003
0etallic materials. ;ire. Simple torsion test
ISO 7808:1999
Plastics. -hermosetting moulding materials. Determination of transfer flow
ISO%IEC 7810:1996
!dentification cards. Physical characteristics
ISO%IEC 7811-1:1996
!dentification cards. #ecording techni=ue. <m$ossing
ISO%IEC 7811-2:1996
!dentification cards. #ecording techni=ue. 0agnetic stripe
ISO%IEC 7811-3:1996
!dentification cards. #ecording techni=ue. 2ocation of em$ossed characters on !D-) cards
ISO%IEC 7811-4:1996
!dentification cards. #ecording techni=ue. 2ocation of read-only magnetic tracks. -racks ) and @
ISO%IEC 7811-5:1996
!dentification cards. #ecording techni=ue. 2ocation of read-write magnetic track. -rack '
ISO%IEC 7813:2001
!dentification cards. >inancial transaction cards
ISO%IEC 7816-2:1999
!dentification cards. !ntegrated circuit(s) cards with contacts. Dimensions and location of the
contacts
ISO%IEC 7816-7:1999
!dentification cards. !ntegrated circuit(s) cards with contacts. !nterindustry commands for
structured cards =uery language (S&92)
ISO%IEC 7816-8:1999
!dentification cards. !ntegrated circuit(s) cards with contacts. Security related interindustry
commands
ISO%IEC 7816-9:2000
!dentification cards. !ntegrated circuit(s) cards with contacts. 3dditional interindustry commands
and security attri$utes
ISO%IEC 7816-10:2000
!dentification cards. !ntegrated circuit(s) cards with contacts. <lectronic signals and answer to
reset for synchronous cards
ISO 7822:1999
-e/tile glass reinforced plastics. Determination of void content. 2oss on ignition% mechanical
disintegration and statistical counting methods
ISO 7823-1:2003
Plastics. Poly(methyl methacrylate) sheets. -ypes% dimensions and characteristics. &ast sheets
ISO 7823-2:2003
Poly(methyl methacrylate) sheets. -ypes% dimensions and characteristics. </truded sheets
ISO 7827:1996
;ater =uality. <valuation in an a=ueous medium of the KultimateK aero$ic $iodegrada$ility of
organic compounds. 0ethod $y analysis of dissolved organic car$on (D"&)
ISO 7837:2001
>ertili.ers. Determination of $ulk density (loose) of fine-grained fertili.ers
ISO 7840:1995
Small craft. >ire resistant fuel hoses
ISO 7854:1997
#u$$er- or plastics-coated fa$rics. Determination of resistance to damage $y fle/ing
ISO 7858-1:1998
0easurement of water flow in closed conduits. &om$ination meters for cold pota$le water.
Specifications
ISO 7858-2:2000
0easurement of water flow in closed conduits. &om$ination meters for cold pota$le water.
!nstallation re=uirements
ISO 7859:2000
0opeds. >uel consumption measurements
ISO 7864:1996
Sterile hypodermic needles for single use
ISO 7879:1997
Diesel engines. &radle mounted in-line fuel in+ection pumps. 0ounting dimensions
ISO 7885:2001
Sterile dental in+ection needles for single use
ISO 7886-1:1997
Sterile hypodermic syringes for single use. Syringes for manual use
ISO 7886-2:1997
Sterile hypodermic syringes for single use. Syringes for use with power-driven syringe pumps
ISO 7887:1995
;ater =uality. </amination and determination of colour
ISO 7889:2003
Fogurt. <numeration of characteristic microorganisms. &olony-count techni=ue at ': BAD&
ISO 7899-1:1999
;ater =uality. Detection and enumeration of intestinal enterococci in surface and waste water.
0iniaturi.ed method (0ost pro$a$le num$er) for surface and waste water
ISO 7899-2:2000
;ater =uality. Detection and enumeration of intestinal enterococci in surface and waste water.
0em$rane filtration method
ISO 7914:2002
>orestry machinery. Porta$le chain-saws. 0inimum handle clearance and si.es
ISO 7918:1995
>orestry machinery. Porta$le $rush cutters and grass trimmers. &utting attachment guard
dimensions
ISO 7919-1:1996
0echanical vi$ration of non-reciprocating machines. 0easurements on rotating shafts and
evaluation criteria. General guidelines
ISO 7919-2:2001
0echanical vi$ration of non-reciprocating machines. 0easurements on rotating shafts and
evaluation criteria. 2and-$ased steam tur$ines and generators in e/cess of (A 0; with normal
operating speeds of )(AA rmin% ),AA rmin% 'AAA rmin and '*AA rmin
ISO 7919-3:1996
0echanical vi$ration of non-reciprocating machines. 0easurements on rotating shafts and
evaluation criteria. &oupled industrial machines
ISO 7919-4:1996
0echanical vi$ration of non-reciprocating machines. 0easurements on rotating shafts and
evaluation criteria. Gas tur$ine sets
ISO 7919-5:1997
0echanical vi$ration of non-reciprocating machines. 0easurements on rotating shafts and
evaluation criteria. 0achine sets in hydraulic power generating and pumping plants
ISO 7932:1998
0icro$iology. General guidance for the enumeration of B:!Bacillus cereusB:#. &olony-count
techni=ue at 'ABAD&
ISO%IEC 7942-1:1994
!nformation technology. &omputer graphics and image processing. Graphical Gernel System
(GGS). >unctional description
ISO%IEC 7942-2:1997
!nformation technology. &omputer graphics and image processing. Graphical Gernel System
(GGS). ?D& metafile
ISO%IEC 7942-3:1999
!nformation technology. &omputer graphics and image processing. Graphical Gernel System
(GGS). 3udit trail
ISO%IEC 7942-4:1998
!nformation technology. &omputer graphics and image processing. Graphical Gernel System
(GGS). Picture part archive
ISO 7944:1998
"ptics and optical instruments. #eference wavelengths
ISO 7965-2:1997
Sacks. Drop test. Sacks made from thermoplastic fle/i$le film
ISO 7967-5:2003
#eciprocating internal com$ustion engines. 7oca$ulary of components and systems. &ooling
systems
ISO 7970:2000
;heat (-riticum aestivum 2.). Specification
ISO 7971-1:2003
&ereals. Determination of $ulk density% called Hmass per hectolitreH. #eference method
ISO 7980:2000
;ater =uality. Determination of calcium and magnesium. 3tomic a$sorption spectrometric
method
ISO 7992:1992
!ron ores. Determination of reduction properties under load
ISO 7998:1996
"ptics and optical instruments. Spectacle frames. 7oca$ulary and lists of e=uivalent terms
ISO 8009 to ISO 8995
ISO 8009-1:1997
#eusa$le ru$$er contraceptive diaphragms. &lassification% sampling and re=uirements
ISO 8009-2:1985
#eusa$le ru$$er contraceptive diaphragms. Determination of si.e
ISO 8009-3:1985
#eusa$le ru$$er contraceptive diaphragms. Determination of dome thickness
ISO 8009-4:1996
#eusa$le ru$$er contraceptive diaphragms. >reedom from visi$le defects
ISO 8009-5:1996
#eusa$le ru$$er contraceptive diaphragms. Determination of tensile properties
ISO 8009-6:1985
#eusa$le ru$$er contraceptive diaphragms. Determination of deterioration after accelerated
ageing
ISO 8009-7:1985
#eusa$le ru$$er contraceptive diaphragms. Determination of compression resistance of coil
spring and flat spring diaphragms
ISO 8009-8:1985
#eusa$le ru$$er contraceptive diaphragms. Determination of twisting during compression of coil
spring and flat spring diaphragms
ISO 8009-9:1985
#eusa$le ru$$er contraceptive diaphragms. Packaging and la$elling
ISO 8009-10:1985
#eusa$le ru$$er contraceptive diaphragms. #ecommendations for storage
ISO 8015:1985
-echnical drawings. >undamental tolerancing principle
ISO 8020:2002
-ools for pressing. Punches with cylindrical head and straight or reduced shank
ISO 8028:2000
#u$$er andor plastics hose assem$lies for airless paint spraying. Specification
ISO 8030:1998
#u$$er and plastics hoses. 0ethod of test for flamma$ility
ISO 8031:1997
#u$$er and plastics hoses and hose assem$lies. Determination of electrical resistance
ISO 8032:1999
#u$$er and plastics hose assem$lies. >le/ing com$ined with hydraulic impulse test (half-omega
test)
ISO 8038-2:2001
"ptics and optical instruments. Screw threads for microscope o$+ectives and related nosepieces.
Screw thread type 0@( / A%:( mm
ISO 8040:2001
"ptics and optical instruments. 0icroscopes. Dimensions of tu$e slide and tu$e slot connections
ISO 8044:2000
&orrosion of metals and alloys. Basic terms and definitions
ISO 8051:1999
2ong shank taps with nominal diameters from 0' to 0)A. >ull-diameter shank taps with recess
ISO 8058:1999
3ir cargo. !nsulated containers. -hermal efficiency re=uirements
ISO 8066-2:2001
#u$$er and plastics hoses and hose assem$lies for automotive air conditioning. Specification.
#efrigerant )'Ca
ISO 8067:1995
>le/i$le cellular polymeric materials. Determination of tear strength
ISO 8082:2003
Self-propelled machinery for forestry. #oll-over protective structures. 2a$oratory tests and
performance re=uirements
ISO 8085-1:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. 0etric
series. Specifications. >ittings for socket fusion using heated tools
ISO 8085-2:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. 0etric
series. Specifications. Spigot fittings for $utt fusion% for socket fusion using heated tools and for
use with eletrofusion fittings
ISO 8085-3:2001
Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. 0etric
series. Specifications. <lectrofusion fittings
ISO 8092-1:1998
#oad vehicles. &onnections for on-$oard electrical wiring harnesses. -afor single-pole
connections. Dimensions and specific re=uirements
ISO 8092-2:2002
#oad vehicles. &onnections for on-$oard electrical wiring harnesses. Definitions% test methods
and general performance re=uirements
ISO 8092-3:1999
#oad vehicles. &onnections for on-$oard electrical wiring harnesses. -afor multi-pole
connections. Dimensions and specific re=uirements
ISO 8092-4:1999
#oad vehicles. &onnections for on-$oard electrical wiring harnesses. Pins for single- and multi-
pole connections. Dimensions and specific re=uirements
ISO 8097:2001
3ircraft. 0inimum airworthiness re=uirements and test conditions for certified air cargo unit
load devices
ISO 8098:2002
&ycles. Safety re=uirements for $icycles for young children
ISO 8099:2001
Small craft. -oilet waste retention systems
ISO 8106:1985
Glass containers. Determination of capacity $y gravimetric method. -est method
ISO 8113:1985
Glass containers. #esistance to vertical load. -est method
ISO 8114:1990
-e/tile machinery and accessories. Spindles for ring-spinning and dou$ling machines. 2ist of
e=uivalent terms
ISO 8116-9:1991
-e/tile machinery and accessories. Beams for winding. Dyeing $eams for te/tile fa$rics
ISO 8117:2003
-e/tile machinery. Gnitting machines. ?ominal diameters of circular machines
ISO 8118:1986
;eaving machines. -emple cylinders
ISO 8119-3:1992
-e/tile machinery and accessories. ?eedles for knitting machines. -erminology. &ompound
needles
ISO 8121:1986
-e/tile machinery. Gnitting machines. ?ameplate information
ISO 8122:2003
-e/tile machinery. Gnitting machines. ?um$er of needles for circular knitting machines of large
nominal diameter
ISO 8126:2000
0icrographics. Duplicating film% silver% dia.o and vesicular. 7isual density. Specifications and
measurement.
ISO 8127-1:1989
0icrographics. 3* si.e microfilm +ackets. >ive-channel +acket for )* mm microfilm
ISO 8127-2:1999
0icrographics. 3* si.e microfilm +ackets. "ther types of +acket for )* mm and '( mm microfilm
ISO 8130-9:2000
&oating powders. Sampling
ISO 8131:1992
1ydraulic fluid power. Single rod cylinders% )* 0Pa ()*A $ar) compact series. -olerances
ISO 8132:1986
1ydraulic fluid power. Single rod cylinders% )*A $ar ()* 0Pa) medium and @(A $ar (@( 0Pa)
series. 0ounting dimensions for accessories
ISO 8133:1991
1ydraulic fluid power. Single rod cylinders% )* 0Pa ()*A $ar) compact series. 3ccessory
mounting dimensions
ISO 8135:1999
1ydraulic fluid power. Single rod cylinders% )* 0Pa ()*A $ar) medium and @( 0Pa (@(A $ar)
series. -olerances
ISO 8137:1986
1ydraulic fluid power. Single rod cylinders% @(A $ar (@( 0Pa) series. Port dimensions
ISO 8138:1998
1ydraulic fluid power. Single rod cylinders% )* 0P3 ()*A $ar) compact series. Port dimensions
ISO 8139:1991
Pneumatic fluid power. &ylinders% ) )AA kPa ()A $ar) series. #od end spherical eyes. 0ounting
dimensions
ISO 8140:1991
Pneumatic fluid power. &ylinders% ) AAA kPa ()A $ar) series. #od end clevis. 0ounting
dimensions
ISO 8166:2003
#esistance welding. Procedure for the evaluation of the life of spot welding electrodes using
constant machine settings
ISO 8178-1:1996
#eciprocating internal com$ustion engines. </haust emission measurement. -est-$ed
measurement of gaseous and particulate e/haust emissions
ISO 8178-2:1997
#eciprocating internal com$ustion engines. </haust emission measurement. 0easurement of
gaseous and particulate e/haust emissions at site
ISO 8178-3:1994
#eciprocating internal com$ustion engines. </haust emission measurement. Definitions and
methods of measurement of e/haust gas smoke under steady state conditions
ISO 8178-4:1996
#eciprocating internal com$ustion engines. </haust emission measurement. -est cycles for
different engine applications
ISO 8178-5:1997
#eciprocating internal com$ustion engines. </haust emission measurement. -est fuels
ISO 8178-6:2001
#eciprocating internal com$ustion engines. </haust emission measurement. #eport of measuring
results and tests
ISO 8178-7:1996
#eciprocating internal com$ustion engines. </haust emission measurement. <ngine family
determination
ISO 8178-8:1996
#eciprocating internal com$ustion engines. </haust emission measurement. <ngine group
determination
ISO 8178-9:2000
#eciprocating internal com$ustion engines. </haust emission measurement. -est cycles and test
procedures for test-$ed measurement of e/haust gas smoke emissions from compression ignition
engines operating under transient conditions
ISO 8178-10:2002
#eciprocating internal com$ustion engines. </haust emission measurement. -est cycles and test
procedures for field measurement of e/haust gas smoke emissions from compression ignition
engines operating under transient conditions
ISO 8185:1998
1umidifiers for medical use. General re=uirements for humidification systems
ISO 8192:1995
;ater =uality. -est for the inhi$ition of o/ygen consumption $y activated sludge
ISO 8205-1:2002
;ater-cooled secondary connection ca$les for resistance welding. Dimensions and re=uirements
for dou$le-conductor connection ca$les
ISO 8205-2:2002
;ater-cooled secondary connection ca$les for resistance welding. Dimensions and re=uirements
for single-conductor connection ca$les
ISO 8205-3:1997
;ater-cooled secondary connection ca$les for resistance welding. -est re=uirements
ISO%IEC 8211:1994
!nformation technology. Specification for a data descriptive file for information interchange
ISO 8216-99:2002
Petroleum products. >uels (class >). &lassification. General
ISO 8222:2002
Petroleum measurement systems. &ali$ration. -emperature corrections for use when cali$rating
volumetric proving tanks
ISO 8224-1:2003
-raveller irrigation machines. "perational characteristics and la$oratory and field test methods
ISO 8229:1991
"perations and $aths relating to dry-cleaning machines. 7oca$ulary
ISO 8230:1998
Safety re=uirements for dry-cleaning machines using perchloroethylene
ISO 8249:2000
;elding. Determination of >errite ?um$er (>?) in austenitic and duple/ ferritic-austenitic &r-?i
stainless steel weld metals
ISO 8253-1:1998
3coustics. 3udiometric test methods. Basic pure tone air and $one conduction threshold
audiometry
ISO 8253-2:1998
3coustics. 3udiometric test methods. Sound field audiometry with pure tone and narrow-$and
test signals
ISO 8253-3:1998
3coustics. 3udiometric test methods. Speech audiometry
ISO 8254-1:2003
Paper and $oard. 0easurement of specular gloss. :(BAD gloss with a converging $eam% -3PP!
method
ISO 8254-2:2003
Paper and $oard. 0easurement of specular gloss. :(BAD gloss with a parallel $eam% D!? method
ISO 8256:1997
Plastics. Determination of tensile-impact strength
ISO 8257-1:1987
Plastics. Poly(methyl methacrylate) (P003) moulding and e/trusion materials. Designation
ISO 8257-2:2001
Plastics. Poly(methyl methacrylate) (P003) moulding and e/trusion materials. Preparation of
test specimens and determination of properties
ISO 8261:2002
0ilk and milk products. General guidance for the preparation of test samples% initial suspensions
and decimal dilutions for micro$iological e/amination
ISO 8282:1997
Dental e=uipment. 0ercury and alloy mi/ers and dispensers
ISO 8289:2001
7itreous and porcelain enamels. 2ow voltage test for detecting and locating defects
ISO 8290:1998
7itreous and porcelain enamels. Determination of resistance to sulfuric acid at room temperature
ISO 8292:1995
3nimal and vegeta$le fats and oils. Determination of solid fat content. Pulsed nuclear magnetic
resonance method
ISO 8294:2000
3nimal and vegeta$le fats and oils. Determination of copper% iron and nickel contents. Graphite
furnace atomic a$sorption method
ISO 8297:1994
3coustics. Determination of sound power levels of multisource industrial plants for evaluation of
sound pressure levels in the environment. <ngineering method
ISO 8307:1998
>le/i$le cellular polymeric materials. Determination of resilience
ISO 8308:1996
#u$$er and plastics hoses and tu$ing. Determination of transmission of li=uids through hose and
tu$ing walls
ISO 8311:1996
#efrigerated light hydrocar$on fluids. &ali$ration of mem$rane tanks and independent prismatic
tanks in ships. Physical measurement
ISO 8312:1999
#u$$er compounding ingredients. Stearic acid. Definition and test methods
ISO 8316:1997
0ethod of li=uid flow in closed conduits. 0ethod $y collection of the li=uid in a volumetric tank
ISO 8318:2002
Packaging. &omplete% filled transport packages and unit loads. Sinusoidal vi$ration tests using a
varia$le fre=uency
ISO 8320-1:2003
&ontact lenses and contact lens care products. 7oca$ulary. &ontact lenses
ISO 8320-2:2001
&ontact lenses and contact lens care products. 7oca$ulary. &ontact lens care products
ISO 8321-1:2002
"ptics and optical instruments. &ontact lenses. #igid corneal and scleral contact lenses
ISO 8321-2:2000
"ptics and optical instruments. &ontact lenses. Single-vision hydrogel contact lenses
ISO 8323:1985
>reight containers. 3irsurface (intermodel) general purpose containers. Specification and tests
ISO%IEC 8326:1996
!nformation technology. "pen systems interconnection. Session service definition
ISO%IEC 8327-1:1996
!nformation technology. "pen systems interconnection. &onnection-oriented session protocol.
Protocol specification
ISO%IEC 8327-2:1996
!nformation technology. "pen systems interconnection. &onnection-oriented session protocol.
Protocol !mplementation &onformance Statement (P!&S) proforma
ISO 8330:2000
#u$$er and plastics hoses and hose assem$lies. 7oca$ulary
ISO%IEC 8348:1996
!nformation technology. "pen systems interconnection. ?etwork service definition
ISO 8349:2002
#oad vehicles. 0easurement of road surface friction
ISO 8351-1:1997
Packaging. 0ethod of specification for sacks. Paper sacks
ISO 8351-2:1997
Packaging. 0ethod of specification for sacks. Sacks made from thermoplastic fle/i$le film
ISO 8359:1997
0edical electrical e=uipment. "/ygen concentrators for medical use. Safety re=uirements
ISO 8362-3:2003
!n+ection containers and accessories. 3luminium caps for in+ection vials
ISO &' 8363:1997
0easurement of li=uid flow in open channels. General guidelines for the selection of method
ISO 8367-1:1997
Packaging. Dimensional tolerances for general purpose sacks. Paper sacks
ISO 8367-2:1997
Packaging. Dimensional tolerances for general purpose sacks. Sacks made from thermoplastic
fle/i$le film
ISO 8368:1999
1ydrometric determinations. >low measurements in open channels using structures. Guidelines
for the selection of structure
ISO 8371:1994
!ron ores. Determination of decrepitation inde/
ISO 8373:1996
0anipulating industrial ro$ots. 7oca$ulary
ISO 8374:2001
Photography. Determination of !S" safelight conditions
ISO 8379:1998
#ough terrain trucks. Sta$ility tests
ISO 8381:2000
0ilk $ased infant foods. Determination of fat content. Gravimetric method (#eference method)
ISO 8384:2001
Ships and marine technology. Dredgers. 7oca$ulary
ISO 8385:1999
Ships and marine technology. Dredgers. &lassification
ISO 8388:1998
Gnitted fa$rics. -ypes. 7oca$ulary
ISO 8395:1995
&inematography. -est films for the reproduction of :A mm motion-picture release prints with
magnetic stripes. Specifications
ISO 8401:1995
0etallic coatings. #eview of methods of measurement of ductility
ISO 8402:1995
9uality management and =uality assurance. 7oca$ulary
ISO 8405:1998
-ools for moulding. <+ector sleeves with cylindrical head. Basic series for general purposes
ISO 8406:2001
-ools for moulding. 0ould $ases. #ound locating elements and spacers
ISO 8419:2003
Belt drives. ?arrow 7-$elts. Sections E?5% )(?5 and @(?5 (lengths in the effective system)
ISO 8420:2002
3nimal and vegeta$le fats and oils. Determination of content of polar compounds
ISO 8429:1997
"ptics and optical instruments. "phthalmology. Graduated dial scale
ISO 8432:1987
<ssential oils. 3nalysis $y high performance li=uid chromatography. General method
ISO 8434-1:1998
0etallic tu$e connections for fluid power and general use. @CBAD compression fittings
ISO 8434-2:1994
0etallic tu$e connections for fluid power and general use. ':BAD flared fittings
ISO 8434-3:1995
0etallic tu$e connections for fluid power and general use. "-ring face seal fittings
ISO 8434-4:2000
0etallic tu$e connections for fluid power and general use. @CBAD cone connectors with "-ring
weld-on nipples
ISO 8439:1990
>orms design. Basic layout
ISO 8442-1:1998
0aterials and articles in contact with foodstuffs. &utlery and ta$le holloware. #e=uirements for
cutlery for the preparation of food
ISO 8442-2:1998
0aterials and articles in contact with foodstuffs. &utlery and ta$le holloware. #e=uirements for
stainless steel and silver-plated cutlery
ISO 8442-3:1998
0aterials and articles in contact with foodstuffs. &utlery and ta$le holloware. #e=uirements for
silver-plated ta$le and decorative holloware
ISO 8442-4:1998
0aterials and articles in contact with foodstuffs. &utlery and ta$le holloware. #e=uirements for
gold-plated cutlery
ISO 8442-6:2001
0aterials and articles in contact with foodstuffs. &utlery and ta$le holloware. 2ightly silver
plated ta$le holloware protected $y la=uer
ISO 8442-7:2001
0aterials and articles in contact with foodstuffs. &utlery and ta$le holloware. #e=uirements for
ta$le cutlery made of silver% other precious metals and their alloys
ISO 8442-8:2001
0aterials and articles in contact with foodstuffs. &utlery and ta$le holloware. #e=uirements for
silver ta$le and decorative holloware
ISO 8443:1999
#olling $earings. #adial $all $earings with flanged outer ring. >lange dimensions
ISO 8459-2:1992
!nformation and documentation. Bi$liographic data element directory. 3c=uisitions applications
ISO 8459-3:1994
!nformation and documentation. Bi$liographic data element directory. !nformation retrieval
applications
ISO 8467:1995
;ater =uality. Determination of permanganate inde/
ISO 8468:1995
ShipKs $ridge layout and associated e=uipment. #e=uirements and guidelines
ISO 8469:1995
Small craft. ?on-fire-resistant fuel hoses
ISO%IEC 8473-1:1998
!nformation technology. Protocol for providing the connectionless-mode network service.
Protocol specification
ISO%IEC 8473-2:1996
!nformation technology. Protocol for providing the connectionless-mode network service.
Provision of the underlying service $y an !S"!<& ,,A@ su$network
ISO%IEC 8473-3:1995
!nformation technology. Protocol for providing the connectionless-mode network service.
Provision of the underlying service $y an 8.@( su$network
ISO%IEC 8473-4:1995
!nformation technology. Protocol for providing the connectionless-mode network service.
Provision of the underlying service $y a su$network that provides the "S! data link service
ISO%IEC 8473-5:1997
!nformation technology. Protocol for providing the connectionless-mode network service.
Provision of the underlying service $y !SD? circuit-switched B-channels
ISO%IEC 8480:1995
!nformation technology. -elecommunications and information e/change $etween systems.
D-<D&< interface $ack-up control operation using !-D-- #ecommendation 7.@C interchange
circuits
ISO%IEC 8481:1996
!nformation technology. -elecommunications and information e/change $etween systems. D-<
to D-< direct connections
ISO%IEC 8482:1994
!nformation technology. -elecommunications and information e/change $etween systems.
-wisted pair multipoint interconnections
ISO 8486-1:1996
Bond a$rasives. Determination and designation of grain si.e distri$ution. 0acrogrits >C to >@@A
ISO 8486-2:1996
Bond a$rasives. Determination and designation of grain si.e distri$ution. 0acrogrits >@'A to
>)@AA
ISO 8497:1997
-hermal insulation. Determination of steady-state thermal transmission properties of thermal
insulation for circular pipes
ISO 8501-1:2001
Preparation of steel su$strates $efore application of paints and related products. 7isual
assessment of surface cleanliness. #ust grades and preparation grades of uncoated steel
su$strates and of steel su$strates after overall removal of previous coatings
ISO 8501-1:Su((le)e*t:2001
Preparation of steel su$strates $efore application of paints and related products. 7isual
assessment of surface cleanliness. #epresentative photographic e/amples of the change of
appearance imparted to steel when $last-cleaned with different a$rasives
ISO 8501-2:2001
Preparation of steel su$strates $efore application of paints and related products. 7isual
assessment of surface cleanliness. Preparation grades of previously coated steel su$strates after
locali.ed removal of previous coatings
DD E!+ ISO 8502-1:2001
Preparation of steel su$strates $efore application of paints and related products. -ests for the
assessment of surface cleanliness. >ield test for solu$le iron corrosion products
ISO 8502-2:2000
Preparation of steel su$strates $efore application of paints and related products. -ests for the
assessment of surface cleanliness. 2a$oratory determination of chloride on cleaned surfaces
ISO 8502-3:2000
Preparation of steel su$strates $efore application of paints and related products. -ests for the
assessment of surface cleanliness. 3ssessment of dust on steel surfaces prepared for painting
(pressure-sensitive tape method)
ISO 8502-4:2000
Preparation of steel su$strates $efore application of paints and related products. -ests for the
assessment of surface cleanliness. Guidance on the estimation of the pro$a$ility of condensation
prior to paint application
ISO 8502-6:2000
Preparation of steel su$strates $efore application of paints and related products. -ests for the
assessment of surface cleanliness. </traction of solu$le contaminants for analysis. -he Bresle
method
ISO 8502-9:2001
Preparation of steel su$strates $efore application of paints and related products. -ests for the
assessment of surface cleanliness. >ield method for the conductometric determination of water-
solu$le salts
ISO 8503-1:1995
Preparation of steel su$strates $efore application of paints and related products. Surface
roughness characteristics of $last-cleaned steel su$strates. Specifications and definitions for !S"
surface profile comparators for the assessment of a$rasive $last-cleaned surfaces
ISO 8503-2:1995
Preparation of steel su$strates $efore application of paints and related products. Surface
roughness characteristics of $last-cleaned steel su$strates. 0ethod for the grading of surface
profile of a$rasive $last-cleaned steel. &omparator procedure
ISO 8503-3:1995
Preparation of steel su$strates $efore application of paints and related products. Surface
roughness characteristics of $last-cleaned steel su$strates. 0ethod for the cali$ration of !S"
surface profile comparators and for the determination of surface profile. >ocusing microscope
procedure
ISO 8503-4:1995
Preparation of steel su$strates $efore application of paints and related products. Surface
roughness characteristics of $last-cleaned steel su$strates. 0ethod for the cali$ration of !S"
surface profile comparators and for the determination of surface profile. Stylus instrument
procedure
ISO 8504-1:2001
Preparation of steel su$strates $efore application of paints and related products. Surface
preparation methods. General principles
ISO 8504-2:2001
Preparation of steel su$strates $efore application of paints and related products. Surface
preparation methods. 3$rasive $last cleaning
ISO 8504-3:2001
Preparation of steel su$strates $efore application of paints and related products. Surface
preparation methods. 1and- and power-tool cleaning
ISO 8514-1:2000
0icrographics. 3lphanumeric computer output microforms. 9uality control. &haracteristics of
the test slide and test data
ISO 8514-2:2000
0icrographics. 3lphanumeric computer output microforms. 9uality control. 0ethod
ISO 8529-1:2001
#eference neutron radiations. &haracteristics and methods of production
ISO 8529-2:2000
#eference neutron radiations. &ali$ration fundamentals of radiation protection devices related to
the $asic =uantities characteri.ing the radiation field
ISO 8529-3:1998
#eference neutron radiations. &ali$ration of area and personal dosimeters and determination of
their response as a function of neutron energy and angle of incidence
ISO 8532:1995
Securities. >ormat for transmission of certificate num$ers
ISO 8535-1:1996
&ompression ignition engines. Steel tu$es for high pressure fuel in+ection pipes. #e=uirements
for seamless cold drawn single wall tu$es
ISO 8536-1:2003
!nfusion e=uipment for medical use. !nfusion glass $ottles
ISO 8536-2:2002
!nfusion e=uipment for medical use. &losures for infusion $ottles
ISO 8536-3:1999
!nfusion e=uipment for medical use. 3luminium caps for infusion $ottles
ISO 8537:1995
Sterile% single-use syringes% with or without needle% for insulin
ISO 8543:1998
-e/tile floor coverings. 0ethods for determination of mass
ISO 8548-4:1998
Prosthetics and orthotics. 2im$ deficiencies. Description of causal conditions leading to
amputation
ISO 8560:1999
&onstruction drawings. #epresentation of modular si.es% lines and grids
ISO 8561:1996
1ousehold refrigerating appliances. #efrigerators% refrigerator-free.ers% fro.en food storage
ca$inets and food free.ers cooled $y forced air circulation. &haracteristics and test methods
ISO 8565:1995
0etals and alloys. 3tmospheric corrosion testing. General re=uirements for field tests
ISO 8566-4:1998
&ranes. &a$ins. 5i$ cranes
ISO 8567:2002
&inematography. 0a/imum permissi$le area for su$title on '( mm and )* mm motion-picture
release prints. Position and dimensions
ISO%IEC 8571-5:1990
!nformation processing systems. "pen systems interconnection. >ile transfer% access and
management. Protocol !mplementation &onformance Statement Proforma
ISO 8573-1:2001
&ompressed air for general use. &ontaminants and purity classes
ISO 8573-2:1996
&ompressed air for general use. -est methods for aerosol oil content
ISO 8573-3:1999
&ompressed air for general use. -est methods for measurement of humidity
ISO 8573-4:2001
&ompressed air for general use. -est methods for solid particle content
ISO 8573-5:2001
&ompressed air for general use. -est methods for oil vapour and organic solvent content
ISO 8573-6:2003
&ompressed air for general use. -est methods for gaseous contaminant content
ISO 8573-7:2003
&ompressed air for general use. -est method for via$le micro$iological contaminant content
ISO 8579-1:2002
3cceptance code for gear units. -est code for air$orne sound
ISO 8580:1995
#u$$er and plastics hoses. Determination of ultra-violet resistance under static conditions
ISO 8581:1994
Photography. <lectronic flash e=uipment. &onnectors to synchro-cord
ISO 8584-1:1990
-hermoplastics pipes for industrial applications under pressure. Determination of the chemical
resistance factor and of the $asic stress. Polyolefin pipes
ISO 8590:1994
&inematography. 3udio records on :A mm motion picture release prints with magnetic stripes.
#ecorded characteristic
ISO 8596:1996
7isual acuity test types. Specification for 2andolt ring optotype for non-clinical purposes
ISO 8597:1996
7isual acuity test types. 0ethod for correlating optotypes used for non-clinical purposes
ISO 8598:1998
"ptics and optical instruments. >ocimeters
ISO 8599:1997
"ptics and optical instruments. &ontact lenses. Determination of the spectral and luminous
transmittance
ISO 8600-1:1997
"ptics and optical instruments. 0edical endoscopes and endoscopic accessories. General
re=uirements
ISO 8600-2:2002
"ptics and optical instruments. 0edical endoscopes and endoscopic accessories. Particular
re=uirements for rigid $ronchoscopes
ISO 8600-4:1997
"ptics and optical instruments. 0edical endoscopes and endoscopic accessories. Determination
of ma/imum width of insertion portion
ISO%IEC 8602:1995
!nformation technology. Protocol for providing the "S! connectionless-mode transport service
ISO 8605:2001
-e/tile-glass-reinforced plastics. Sheet moulding compound (S0&). Basis for specification
ISO &' 8610:1984
2ight gauge metal containers. #ound vent-hole cans with soldered ends for milk and milk
products. &apacities and related diameters
ISO 8611:1991
General-purpose flat pallets for through transit of goods. -est methods
ISO 8612:2001
"phthalmic instruments. -onometers
ISO 8619:1998
Plastics. Phenolic resin powder. Determination of flow distance on a heated glass plate
ISO 8620:1996
Plastics. Phenolic resin powder. Sieve analysis using air-+et sieve apparatus
ISO 8622:1998
&inematography. 0agnetic sound records on :A mm motion-picture release prints with magnetic
stripes. 3-chain reproduction characteristics
ISO 8624:2002
"phthalmic optics. Spectacle frames. 0easuring system and terminology
ISO%IEC 8632-3:1999
!nformation technology. &omputer graphics. 0etafile for the storage and transfer of picture
description information. Binary encoding
ISO%IEC 8632-4:1999
!nformation technology. &omputer graphics. 0etafile for the storage and transfer of picture
description information. &lear te/t encoding
ISO 8640-1:1990
-e/tile machinery and accessories. >lat warp knitting machines. 7oca$ulary. Driving
mechanisms% supports and knitting elements
ISO 8640-2:1990
-e/tile machinery and accessories. >lat warp knitting machines. 7oca$ulary. ;arp let-off% fa$ric
take-up and $atching
ISO 8640-3:2002
-e/tile machinery and accessories. >lat warp knitting machines. 7oca$ulary. 7oca$ulary of
patterning devices
ISO%IEC 8650-2:1997
!nformation technology. "pen systems interconnection. Protocol specification for the association
control service element. Protocol implementation conformance statement (P!&S) proforma
ISO%IEC 8651-4:1995
!nformation technology. &omputer graphics. Graphical Gernel System (GGS) language $indings.
&
ISO%IEC 8652:1995
Programming languages. 3da
ISO 8655-1:2002
Piston-operated volumetric apparatus. -erminology% general re=uirements and user
recommendations
ISO 8655-2:2002
Piston-operated volumetric apparatus. Piston pipettes
ISO 8655-3:2002
Piston-operated volumetric apparatus. Piston $urettes
ISO 8655-4:2002
Piston-operated volumetric apparatus. Dilutors
ISO 8655-5:2002
Piston-operated volumetric apparatus. Dispensers
ISO 8655-6:2002
Piston-operated volumetric apparatus. Gravimetric methods for the determination of
measurement error
ISO 8660:2002
Plastics. Determination of permanganate a$sorption num$er of caprolactam. Spectrometric
method
ISO 8662-4:1995
1and-held porta$le power tools. 0easurement of vi$rations at the handle. Grinding machines
ISO 8662-6:1995
1and-held porta$le power tools. 0easurement of vi$rations at the handle. !mpact drills
ISO 8662-7:1997
1and-held porta$le power tools. 0easurement of vi$rations at the handle. ;renches%
screwdrivers and nut runners with impact% impulse or ratchet action
ISO 8662-8:1997
1and-held porta$le power tools. 0easurement of vi$rations at the handle. Polishers and rotary%
or$ital and random or$ital sanders
ISO 8662-9:1997
1and-held porta$le power tools. 0easurement of vi$rations at the handle. #ammers
ISO 8662-10:1998
1and-held porta$le power tools. 0easurement of vi$rations at the handle. ?i$$lers and shears
ISO 8662-12:1997
1and-held porta$le power tools. 0easurement of vi$rations at the handle. Saws and files with
reciprocating action and saws with rotating or oscillating action
ISO 8662-13:1997
1and-held porta$le power tools. 0easurement of vi$rations at the handle. Die grinders
ISO 8662-14:1997
1and-held porta$le power tools. 0easurement of vi$rations at the handle. Stone-working tools
and needle scalers
ISO 8665:1996
Small craft. 0arine propulsion engines and systems. Power measurements and declarations
ISO 8666:2002
Small craft. Principal data
ISO 8669-2:1997
Drine collection $ags. #e=uirements and test methods
ISO 8670-2:1997
"stomy collection $ags. #e=uirements and test methods
ISO 8670-3:2000
"stomy collection $ags. Determination of odour transmission of colostomy and ileostomy $ags
ISO 8673:2001
1e/agon nuts% style )% with metric fine pitch thread. Product grades 3 and B
ISO 8674:2001
1e/agon nuts% style @% with metric fine pitch thread. Product grades 3 and B
ISO 8675:2001
1e/agon thin nuts (chamfered) with metric fine pitch thread. Product grades 3 and B
ISO 8676:2001
1e/agon head screws with metric fine pitch thread. Product grades 3 and B
ISO 8689-1:2000
;ater =uality. Biological classification of rivers. Guidance on the interpretation of $iological
=uality data from surveys of $enthic macroinverte$rates
ISO 8689-2:2000
;ater =uality. Biological classification of rivers. Guidance on the presentation of $iological
=uality data from surveys of $enthic macroinverte$rates
ISO 8693:1998
-ools for moulding. >lat e+ector pins
ISO 8694:1998
-ools for moulding. Shouldered e+ector pins
ISO 8697:1999
&rude petroleum and petroleum products. -ransfer accounta$ility. 3ssessment of on $oard
=uantity ("B9) and =uantity remaining on $oard (#"B)
ISO 8727:1997
0echanical vi$ration and shock. 1uman e/posure. Biodynamic coordinate systems
ISO 8728:1999
Ships and marine technology. 0arine gyro-compasses
ISO 8729:1999
Ships and marine technology. 0arine radar reflectors
ISO 8733:1998
Parallel pins with internal thread% of unhardened steel or austenitic stainless steel
ISO 8734:1998
Parallel pins% of hardened steel or martensitic stainless steel (Dowel pins)
ISO 8735:1998
Parallel pins with internal thread% of hardened steel or martensitic stainless steel
ISO 8739:1998
Grooved pins. >ull-length parallel grooved% with pilot
ISO 8740:1998
Grooved pins. >ull-length parallel grooved% with chamfer
ISO 8741:1998
Grooved pins. 1alf-length reverse-taper grooved
ISO 8742:1998
Grooved pins. "ne-third-length centre grooved
ISO 8743:1998
Grooved pins. 1alf-length centre grooved
ISO 8744:1998
Grooved pins. >ull-length taper grooved
ISO 8745:1998
Grooved pins. 1alf-length taper grooved
ISO 8746:1998
Grooved pins with round head
ISO 8747:1998
Grooved pins with countersunk head
ISO 8748:1998
Spring-type straight pins. &oiled% heavy duty
ISO 8750:1998
Spring-type straight pins. &oiled% standard duty
ISO 8751:1998
Spring-type straight pins. &oiled% light duty
ISO 8752:1998
Spring-type straight pins. Slotted% heavy duty
ISO 8764-1:1999
3ssem$ly tools for screws and nuts. Screwdrivers for cross-recessed head screws. Driver points
ISO 8765:2001
1e/agon head $olts with metric fine pitch thread. Product grades 3 and B
ISO 8778:2003
Pneumatic fluid power. Standard reference atmosphere
ISO 8780-1:1995
Pigments and e/tenders. 0ethods of dispersion for assessment of dispersion characteristics.
!ntroduction
ISO 8780-2:1995
Pigments and e/tenders. 0ethods of dispersion for assessment of dispersion characteristics.
Dispersion using an oscillatory shaking machine
ISO 8780-3:1995
Pigments and e/tenders. 0ethods of dispersion for assessment of dispersion characteristics.
Dispersion using a high speed impeller mill
ISO 8780-4:1995
Pigments and e/tenders. 0ethods of dispersion for assessment of dispersion characteristics.
Dispersion using a $ead mill
ISO 8780-5:1995
Pigments and e/tenders. 0ethods of dispersion for assessment of dispersion characteristics.
Dispersion using an automatic muller
ISO 8780-6:1995
Pigments and e/tenders. 0ethods of dispersion for assessment of dispersion characteristics.
Dispersion using a triple-roll mill
ISO 8781-1:1995
Pigments and e/tenders. 0ethods of assessment of dispersion characteristics. 3ssessment from
the charge in tinting strength of coloured pigments
ISO 8781-2:1995
Pigments and e/tenders. 0ethods of assessment of dispersion characteristics. 3ssessment from
the change in fineness of grind
ISO 8781-3:1995
Pigments and e/tenders. 0ethods of assessment of dispersion characteristics. 3ssessment from
the change in gloss
ISO 8785:1999
Geometrical product specification (GPS). Surface imperfections. -erms% definitions and
parameters
ISO 8788:2000
3erospace. ?uts% metric. -olerances of form and position
ISO 8789:1994
#u$$er hoses and hose assem$lies for li=uefied petroleum gas in motor vehicles. Specification
ISO 8795:2001
Plastics piping systems for the transport of water intended for human consumption. 0igration
assessment. Determination of migration values of plastics pipes and fittings and their +oints
ISO 8799:1996
3nalysis of surface active agents (raw materials). <tho/ylated alcohol and alkylphenol sulfates.
0ethod for determination of unsulfated matter content
ISO 8805:1988
!nformation processing systems. &omputer graphics. Graphical kernel system for three
dimensions (GGS-'D) functional description
ISO%IEC 8806-4:1991
!nformation technology. &omputer graphics. Graphical Gernel System for three dimensions
(GGS-'D) language $indings. &
ISO 8819:1995
0ethods of test for petroleum and its products. 2i=uefied petroleum gases. Detection of
hydrogen sulfide. 2ead acetate method
ISO%IEC 8822:1994
!nformation technology. "pen systems interconnection. Presentation service definition
ISO%IEC 8823-2:1997
!nformation technology. "pen systems interconnection. &onnection-orientated presentation
protocol. &onnection-oriented presentation protocol6 Protocol implementation conformance
statement (P!&S) proforma
ISO 8826-1:1995
-echnical drawings. #oller $earings. General simplified representation
ISO 8826-2:1997
-echnical drawings. #oller $earings. Detailed simplified representation
ISO 8835-2:1999
!nhalational anaesthesia systems. 3naesthetic $reathing systems for adults
ISO%IEC 8859-1:1998
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin alpha$et ?o. )
ISO%IEC 8859-2:1999
2atin alpha$et ?o. @
ISO%IEC 8859-3:1999
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin alpha$et ?o. '
ISO%IEC 8859-4:1998
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin alpha$et ?o. C
ISO%IEC 8859-5:1999
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin&yrillic alpha$et
ISO%IEC 8859-6:1999
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin3ra$ic alpha$et
ISO%IEC 8859-8:1999
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin1e$rew alpha$et
ISO%IEC 8859-9:1999
2atin alpha$et ?o. (
ISO%IEC 8859-10:1998
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin alpha$et ?o. *
ISO%IEC 8859-13:1998
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin alpha$et ?o. :
ISO%IEC 8859-14:1998
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin alpha$et ?o. ,
(&eltic)
ISO%IEC 8859-15:1999
!nformation technology. ,-$it single-$yte coded graphic character sets. 2atin alpha$et ?o. E
ISO 8861:1998
Ship$uilding. <ngine-room ventilation in diesel-engined ships. Design re=uirements and $asis of
calculations
ISO 8871:1997
<lastomeric parts for a=ueous parenteral preparations
ISO 8872:2003
3luminium caps for transfusion% infusion and in+ection $ottles. General re=uirements and test
methods
ISO%IEC 8878:1992
!nformation technology. -elecommunications and information e/change $etween systems. Dse
of 8.@( to provide the "S! connection-mode network service
ISO%IEC 8882-1:1996
!nformation technology. -elecommunications and information e/change $etween systems. 8.@(-
D-< conformance testing. General principles
ISO%IEC 8882-3:1991
!nformation technology. -elecommunications and information e/change $etween systems. 8.@(-
D-< conformance testing. Packet layer conformance suite
ISO 8886:1996
!nformation technology. "pen systems interconnection. Data link service definition
ISO 8891:2000
Dental casting alloys with no$le metal content of at least @(N $ut less than :(N
ISO 8892:1995
"ilseed residues. Determination of total residual he/ane
ISO 8893:1997
>orestry machinery. Porta$le $rush cutters and grass trimmers. <ngine performance and fuel
consumption
ISO 8957:1996
!nformation and documentation. 1e$rew alpha$et coded character sets for $i$liographic
information interchange
ISO 8968-1:2002
0ilk. Determination of nitrogen content. G+eldahl method
ISO 8968-2:2002
0ilk. Determination of nitrogen content. Block-digestion method (0acro method)
ISO 8968-4:2002
0ilk. Determination of nitrogen content. Determination of non-protein nitrogen content
ISO 8968-5:2002
0ilk. Determination of nitrogen content. Determination of protein-nitrogen content
ISO 8973:1999
2i=uefied petroleum gases. &alculation method for density and vapour pressure
ISO 8974:2002
Plastics. Phenolic resins. Determination of residual phenol content $y gas chromatography
ISO 8975:1995
Plastics. Phenolic resins. Determination of p1
ISO 8977:2003
-ools for pressing. 0atri/es
ISO 8980-1:1997
"phthalmic optics. Dncut finished spectacle lenses. Specifications for single-vision and
multifocal lenses
ISO 8980-2:1997
"phthalmic optics. Dncut finished spectacle lenses. Specifications for progressive power lenses
ISO 8980-3:1999
"phthalmic optics. Dncut finished spectacle lenses. -ransmittance specifications and test
methods
ISO 8980-4:2000
"phthalmic optics. Dncut finished spectacle lenses. Specifications and test methods for anti-
reflective coatings
ISO 8985:1998
Plastics. <thylenevinyl acetate copolymer (<73&) thermoplastics. Determination of vinyl
acetate content
ISO 8986-1:1999
Plastics. Poly$utene (PB) moulding and e/trusion materials. Designation system and $asis for
specifications
ISO 8986-2:1996
Plastics. Poly$utene (PB) moulding and e/trusion materials. Preparation of test specimens and
determination of properties
ISO 8987:1998
Plastics. Phenolic resins. Determination of reactivity on a B-transformation test plate
ISO 8988:1997
Plastics. Phenolic resins. Determination of he/amethylenetetramine content. G+eldahl method
and perchloric acid method
ISO 8989:1998
Plastics. 2i=uid phenolic resins. Determination of water misci$ility
ISO 8990:1996
-hermal insulation. Determination of steady-state thermal transmission properties. &ali$rated
and guarded hot $o/
ISO 8995:2002
2ighting of indoor work places
ISO 9000 to ISO 9999
ISO 9000:2000
9uality management systems. >undamentals and voca$ulary
ISO 9000-1:1994
9uality management and =uality assurance standards. Guidelines for selection and use
ISO 9000-2:1997
9uality management and =uality assurance standards. Generic guidelines for the application of
!S" EAA)% !S" EAA@ and !S" EAA'
ISO 9000-3:1997
9uality management and =uality assurance standards. Guidelines for the application of !S"
EAA)6)EEC to the development% supply% installation and maintenance of computer software
ISO 9001:1994
9uality systems. 0odel for =uality assurance in design% development% production% installation
and servicing
ISO 9001:2000
9uality management systems. #e=uirements
ISO 9001:2000 ,A5 -a).*ate/0
9uality management systems. #e=uirements
ISO 9002:1994
9uality systems. 0odel for =uality assurance in production% installation and servicing
ISO 9003:1994
9uality systems. 0odel for =uality assurance in final inspection and test
ISO 9004:2000
9uality management systems. Guidelines for performance improvements
ISO 9013:2002
-hermal cutting. &lassification of thermal cuts. Geometrical product specification and =uality
tolerances
ISO 9019:1995
Securities. ?um$ering of certificates
ISO 9020:1998
Binders for paints and varnishes. Determination of free-formaldehyde content of amino resins.
Sodium sulfite titrimetric method
ISO 9022-1:1994
"ptics and optical instruments. <nvironmental test methods. Definitions% e/tent of testing
ISO 9022-2:2002
"ptics and optical instruments. <nvironmental test methods. &old% heat and humidity
ISO 9022-3:1998
"ptics and optical instruments. <nvironmental test methods. 0echanical stress
ISO 9022-4:2002
"ptics and optical instruments. <nvironmental test methods. Salt mist
ISO 9022-5:1994
"ptics and optical instruments. <nvironmental test methods. &om$ined cold% low air pressure
ISO 9022-6:1994
"ptics and optical instruments. <nvironmental test methods. Dust
ISO 9022-7:1994
"ptics and optical instruments. <nvironmental test methods. Drip% rain
ISO 9022-8:1994
"ptics and optical instruments. <nvironmental test methods. 1igh pressure% low pressure%
immersion
ISO 9022-9:1994
"ptics and optical instruments. <nvironmental test methods. Solar radiation
ISO 9022-10:1998
"ptics and optical instruments. <nvironmental test methods. &om$ined sinusoidal vi$ration and
dry heat or cold
ISO 9022-11:1994
"ptics and optical instruments. <nvironmental test methods. 0ould growth
ISO 9022-12:1994
"ptics and optical instruments. <nvironmental test methods. &ontamination
ISO 9022-13:1998
"ptics and optical instruments. <nvironmental test methods. &om$ined shock% $ump or free fall
and dry heat or cold
ISO 9022-14:1994
"ptics and optical instruments. <nvironmental test methods. Dew% hoarfrost% ice
ISO 9022-15:1998
"ptics and optical instruments. <nvironmental test methods. &om$ined digitally controlled
$road-$and random vi$ration and dry heat or cold
ISO 9022-16:1998
"ptics and optical instruments. <nvironmental test methods. &om$ined $ounce or steady-state
acceleration and dry heat or cold
ISO 9022-17:1994
"ptics and optical instruments. <nvironmental test methods. &om$ined contamination% solar
radiation
ISO 9022-18:1994
"ptics and optical instruments. <nvironmental test methods. &om$ined damp heat and low
internal pressure
ISO 9022-19:1994
"ptics and optical instruments. <nvironmental test methods. -emperature cycles com$ined with
sinusoidal or random vi$ration
ISO 9022-20:1997
"ptics and optical instruments. <nvironmental test methods. 1umid atmosphere containing
sulfur dio/ide or hydrogen sulfide
ISO 9022-21:1998
"ptics and optical instruments. <nvironmental test methods. &om$ined low pressure and
am$ient temperature or dry heat
ISO 9029:1997
0ethods of test for petroleum and its products. &rude petroleum. Determination of water.
Distillation method
ISO 9038:2002
-est for sustained com$usti$ility of li=uids
ISO 9039:1994
"ptics and optical instruments. 9uality evaluation of optical systems. Determination of
distortion
ISO%IEC 9040:1997
!nformation technology. "pen systems interconnection. 7irtual terminal $asic class service
ISO%IEC 9041-1:1997
!nformation technology. "pen systems interconnection. 7irtual terminal $asic class protocol.
Specification
ISO%IEC 9041-2:1997
!nformation technology. "pen systems interconnection. 7irtual terminal $asic class protocol.
Protocol implementation conformance statement (P!&S) proforma
ISO 9044:1999
!ndustrial woven wire cloth. -echnical re=uirements and testing
ISO 9047:2003
Building construction. 5ointing products. Determination of adhesioncohesion properties of
sealants at varia$le temperatures
ISO 9054:1999
&ellular plastics% rigid. -est methods for self-skinned high-density materials
ISO 9056:1990
Glass containers. Series of pilferproof finish. Dimensions
ISO 9057:1991
Glass containers. @, mm tamper-evident finish for pressuri.ed li=uids. Dimensions
ISO 9058:1992
Glass containers. -olerances
ISO%IEC 9066-3:1996
!nformation processing systems. -e/t communication. #elia$le transfer. Protocol
!mplementation &onformance Statement (P!&S) proforma
ISO 9073-2:1997
-e/tiles. -est methods for nonwovens. Determination of thickness
ISO 9073-4:1997
-e/tiles. -est methods for nonwovens. Determination of tear resistance
ISO 9073-6:2000
-e/tiles. -est methods for nonwovens. 3$sorption
ISO 9073-7:1998
-e/tiles. -est methods for nonwovens. Determination of $ending length
ISO 9073-8:1998
-e/tiles. -est methods for nonwovens. Determination of li=uid strike-through time (simulated
urine)
ISO 9073-9:1998
-e/tiles. -est methods for nonwovens. Determination of drape coefficient
ISO 9073-11:2002
-e/tiles. -est methods for nonwovens. #un-off
ISO 9073-12:2002
-e/tiles. -est methods for nonwovens. Demand a$sor$ency
ISO%IEC 9075-9:2001
!nformation technology. Data$ase languages. S92. !nformation technology. Data$ase
2anguages. S92. 0anagement of e/ternal data (S920<D)
ISO%IEC 9075-10:2000
!nformation technology. Data$ase languages. S92. "$+ect 2anguage Bindings (S92"2B)
ISO%IEC 9075-13:2002
!nformation technology. Data$ase languages. S92. S92 routines and types using the 5ava
programming language (S925#-)
ISO 9080:2003
Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of
thermoplastics materials in pipe form $y e/trapolation
ISO 9083:2001
&alculation of load capacity of spur and helical gears. 3pplication to marine gears
ISO 9084:2000
&alculation of load capacity of spur and helical gears. 3pplication to high speed gears and gears
of similar re=uirements
ISO 9085:2002
&alculation of load capacity of spur and helical gears. 3pplication for industrial gears
ISO 9093-1:1998
Small craft. Seacocks and through-hull fittings. 0etallic
ISO 9093-2:2002
Small craft. Seacocks and through-hull fittings. ?on-metallic
ISO 9094-1:2003
Small craft. >ire protection. &raft with a hull length of up to and including )( m
ISO 9094-2:2002
Small craft. >ire protection. &raft with a hull length of over )( m
ISO 9096:2003
Stationary source emissions. 0anual determination of mass concentration of particulate matter
ISO 9097:1995
Small craft. <lectric fans
ISO 9102:1997
Diesel engines. Screw-in in+ection no..le holders types @C% @(% @* and @*.)
ISO &' 9122-2:1990
-o/icity testing of fire effluents. Guidelines for $iological assays to determine the acute
inhalation to/icity of fire effluents ($asic principles% criteria and methodology
ISO &' 9122-3:1993
-o/icity testing of fire effluents. 0ethods for the analysis of gases and vapours in fire effluents
ISO &' 9122-4:1993
-o/icity testing of fire effluents. -he fire model (furnaces and com$ustion apparatus used in
small-scale testing)
ISO &' 9122-5:1993
-o/icity testing of fire effluents. Prediction of to/ic effects of fire effluents
ISO &' 9122-6:1994
-o/icity testing of fire effluents. Guidance for regulators and specifiers on the assessment of
to/ic ha.ard in fires in $uildings and transport
ISO 9123:2001
0easurement of li=uid flow in open channels. Stage-fall-discharge relationships
ISO%IEC 9126-1:2001
!nformation technology. Software product =uality. 9uality model
ISO 9136-2:2000
3$rasive grains. Determination of $ulk density. 0icrogrits
ISO 9144:1991
Securities. "ptical character recognition line. Position and structure
ISO 9163:1999
-e/tile glass. #ovings. 0anufacture of test specimens and determination of tensile strength of
impregnated rovings
ISO 9167-1:1995
#apeseed. Determination of glucosinolates content. 0ethod using high-performance li=uid
chromatography
ISO 9167-2:1997
#apeseed. Determination of glucosinolates content. 0ethod using 8-ray fluorescence
spectrometry
ISO 9173-1:1996
Dental e/traction forceps. Screw and pin +oint types
ISO 9186:2001
Graphical sym$ols. -est methods for +udged comprehensi$ility and for comprehension
ISO 9187-1:2003
!n+ection e=uipment for medical use. 3mpoules for in+ecta$les
ISO 9187-2:1999
!n+ection e=uipment for medical use. "ne-point-cut ("P&) ampoules
ISO 9197:1998
Paper% $oard and pulps. Determination of water-solu$le chlorides
ISO 9198:2001
Paper% $oard and pulp. Determination of water-solu$le sulfates
ISO 9207:1995
0anually porta$le chain-saws with internal com$ustion engine. Determination of sound power
levels. <ngineering method (grade @)
ISO 9211-1:1994
"ptics and optical instruments. "ptical coatings. Definitions
ISO 9211-2:1994
"ptics and optical instruments. "ptical coatings. "ptical properties
ISO 9211-3:1994
"ptics and optical instruments. "ptical coatings. <nvironmental dura$ility
ISO 9211-4:1996
"ptics and optical instruments. "ptical coatings. Specific test methods
ISO 9220:1995
0etallic coatings. 0easurement of coating thickness. Scanning electron microscope method
ISO 9222-1:1995
-echnical drawings. Seals for dynamic application. General simplified representation
ISO 9222-2:1995
-echnical drawings. Seals for dynamic application. Detailed simplified representation
ISO 9230:1991
!nformation and documentation. Determination of price inde/es for $ooks and serials purchased
$y li$raries
ISO 9232:2003
Fogurt. !dentification of characteristic microorganisms (2acto$acillus del$rueckii su$sp.
$ulgaricus and Streptococcus thermophilus)
ISO 9236-3:1999
Photography. Sensitometry of screenfilm systems for medical radiography. Determination of
sensitometric curve shape% speed and average gradient for mammography
ISO 9237:1995
-e/tiles. Determination of the permea$ility of fa$rics to air
ISO 9239-1:2002
#eaction to fire tests. 1ori.ontal surface spread of flame on floor-covering systems.
Determination of the $urning $ehaviour using a radiant heat source
ISO 9241-1:1997
<rgonomic re=uirements for office work with visual display terminals (7D-s). General
introduction
ISO 9241-4:1998
<rgonomic re=uirements for office work with visual display terminals (7D-s). Gey$oard
re=uirements
ISO 9241-5:1999
<rgonomic re=uirements for office work with visual display terminals (7D-s). ;orkstation
layout and postural re=uirements
ISO 9241-6:2000
<rgonomic re=uirements for office work with visual display terminals (7D-s). Guidance on the
work environment
ISO 9241-7:1998
<rgonomic re=uirements for office work with visual display terminals (7D-s). #e=uirements for
display with reflections
ISO 9241-8:1998
<rgonomic re=uirements for office work with visual display terminals (7D-s). #e=uirements for
displayed colours
ISO 9241-9:2000
<rgonomic re=uirements for office work with visual display terminals (7D-s). #e=uirements for
non-key$oard input devices
ISO 9241-10:1996
<rgonomic re=uirements for office work with visual display terminals (7D-s). Dialogue
principles
ISO 9241-11:1998
<rgonomic re=uirements for office work with visual display terminals (7D-s). Guidance on
usa$ility
ISO 9241-12:1999
<rgonomic re=uirements for office work with visual display terminals (7D-s). Presentation of
information
ISO 9241-13:1999
<rgonomic re=uirements for office work with visual display terminals (7D-s). Dser guidance
ISO 9241-14:2000
<rgonomic re=uirements for office work with visual display terminals (7D-s). 0enu dialogues
ISO 9241-15:1998
<rgonomic re=uirements for office work with visual display terminals (7D-s). &ommand
dialogues
ISO 9241-16:1999
<rgonomic re=uirements for office work with visual display terminals (7D-s). Direct
manipulation dialogues
ISO 9241-17:1998
<rgonomic re=uirements for office work with visual display terminals (7D-s). >orm-filling
dialogues
ISO 9251:1996
-hermal insulation. 1eat transfer. &onditions and properties of materials. 7oca$ulary
ISO 9276-1:1998
#epresentation of results of particle si.e analysis. Graphical representation
ISO 9276-2:2001
#epresentation of results of particle si.e analysis. &alculation of average particle si.esdiameters
and moments from particle si.e distri$utions
ISO 9276-4:2001
#epresentation of results of particle si.e analysis. &haracteri.ation of a classification process
ISO%IEC 9281-1:1990
!nformation technology. Picture coding methods. !dentification
ISO%IEC 9281-2:1990
!nformation technology. Picture coding methods. Procedure for registration
ISO 9282-1:1988
!nformation processing. &oded representation of pictures. <ncoding principles for picture
representation in a :-$it or ,-$it environment
ISO 9283:1998
0anipulating industrial ro$ots. Performance criteria and related test methods
ISO 9285:1997
3$rasive grains and crude. &hemical analysis of fused aluminium o/ide
ISO 9286:1997
3$rasive grains and crude. &hemical analysis of silicon car$ide
ISO 9288:1996
-hermal insulation. 1eat transfer $y radiation. Physical =uantities and definitions
ISO 9289:1995
"ilseed residues. Determination of free residual he/ane
ISO%IEC &' 9294:1990
!nformation technology. Guidelines for the management of software documentation
ISO 9300:1995
0easurement of gas flow $y means of critical flow 7enturi no..les
ISO 9308-1:2000
;ater =uality. Detection and enumeration of B:!<scherichia &oliB:# and coliform $acteria in
surface and waste water. 0em$rane filtration method
ISO 9308-3:1999
;ater =uality. Detection and enumeration of B:!<scherichia &oliB:# and coliform $acteria in
surface and waste water. 0iniaturi.ed method (most pro$a$le num$er) for the detection and
enumeration of B:!<. coliB:# in surface and waste water
ISO 9311-2:2002
3dhesives for thermoplastic piping systems. Determination of shear strength
ISO 9312:1995
#esistance welding e=uipment. !nsulated pins for use in electrode $ack-ups
ISO%IEC 9314-5:1995
!nformation processing systems. >i$re Distri$uted Data !nterface (>DD!). 1y$rid #ing &ontrol
(1#&)
ISO%IEC 9314-6:1998
!nformation processing systems. >i$re Distri$uted Data !nterface (>DD!). Station management
(S0-)
ISO%IEC 9314-7:1998
!nformation processing systems. >i$re Distri$uted Data !nterface (>DD!). Physical layer protocol
(P1F-@)
ISO%IEC 9314-8:1998
!nformation processing systems. >i$re Distri$uted Data !nterface (>DD!). 0edia access control-
@ (03&-@)
ISO 9334:1995
"ptics and optical instruments. "ptical transfer function. Definitions and mathematical
relationships
ISO 9335:1995
"ptics and optical instruments. "ptical transfer function. Principles and procedures of
measurement
ISO 9336-1:1994
"ptics and optical instruments. 3pplication. "ptical transfer function. !nterchangea$le lenses for
'( mm still cameras
ISO 9336-2:1994
"ptics and optical instruments. 3pplication. "ptical transfer function. 2enses for office copiers
ISO 9336-3:1994
"ptics and optical instruments. 3pplication. "ptical transfer function. -elescopes
ISO 9337-1:2001
&ontact lenses. Determination of $ack verte/ power. 0ethod using focimeter with manual
focusing
ISO 9338:1998
"ptics and optical instruments. &ontact lenses. Determination of the diameters
ISO 9339-1:1998
"ptics and optical instruments. &ontact lenses. Determination of the thickness. #igid contact
lenses
ISO 9339-2:1998
"ptics and optical instruments. &ontact lenses. Determination of the thickness. 1ydrogel contact
lenses
ISO 9340:1999
"ptics and optical instruments. &ontact lenses. Determination of strains for rigid contact lenses
ISO 9341:1998
"ptics and optical instruments. &ontact lenses. Determination of inclusions and surface
imperfections for rigid contact lenses
ISO 9342:1998
"ptics and optical instruments. -est lenses for cali$ration of focimeters
ISO 9345-2:2003
"ptics and optical instruments. 0icroscopes. !maging distances related to mechanical reference
planes. !nfinity-corrected optical systems
ISO 9346:1996
-hermal insulation. 0ass transfer. Physical =uantities and definitions
ISO 9358:1994
"ptics and optical instruments. 7eiling glare of image forming systems. Definitions and methods
of measurement
ISO 9360-1:2000
3naesthetic and respiratory e=uipment. 1eat and moisture e/changers (10<s) for humidifying
respired gases in humans. 10<s for use with minimum tidal volumes of @(A ml
ISO 9360-2:2002
3naesthetic and respiratory e=uipment. 1eat and moisture e/changers (10<s) for humidifying
respired gases in humans. 10<s for use with tracheostomi.ed patients having minimum tidal
volumes of @(A ml
ISO 9362:1994
Banking. Banking telecommunication messages. Bank identifier codes
ISO 9363-1:1999
"ptics and optical instruments. &ontact lenses. Determination of cytoto/icity of contact lens
material. 3gar overlay test and growth inhi$ition test
ISO 9370:1997
Plastics. !nstrumental determination of radiant e/posure in weathering tests. General guidance
and $asic test method
ISO 9377-2:2000
;ater =uality. Determination of hydrocar$on oil inde/. 0ethod using solvent e/traction and gas
chromatography
ISO 9391:1995
;ater =uality. Sampling in deep water for macro-inverte$rates. Guidance on the use of
coloni.ation% =ualitative and =uantitative samplers
ISO 9394:1998
"phthalmic optics. &ontact lenses and contact lens care products. Determination of
$iocompati$ility $y ocular study with ra$$it eyes
ISO 9396:2001
Plastics. Phenolic resins. Determination of the gel time at a given temperature using automatic
apparatus
ISO 9397:1997
Plastics. Phenolic resins. Determination of free-formaldehyde content. 1ydro/ylamine
hydrochloride method
ISO 9398-1:2003
Specifications for industrial laundry machines. Definitions and testing of capacity and
consumption characteristics. >latwork ironing machines
ISO 9398-2:2003
Specifications for industrial laundry machines. Definitions and testing of capacity and
consumption characteristics. Batch drying tum$lers
ISO 9398-3:2003
Specifications for industrial laundry machines. Definitions and testing of capacity and
consumption characteristics. ;ashing tunnels
ISO 9398-4:2003
Specifications for industrial laundry machines. Definitions and testing of capacity and
consumption characteristics. ;asher-e/tractors
ISO 9400:1996
?ickel-$ased alloys. Determination of resistance to intergranular corrosion
ISO 9403:2000
&rude petroleum. -ransfer accounta$ility. Guidelines for cargo inspection
ISO 9408:1999
;ater =uality. <valuation of ultimate aero$ic $iodegrada$ility of organic compounds in a=ueous
medium $y determination of o/ygen demand in a closed respirometer
ISO 9409-1:1997
0anipulating industrial ro$ots. 0echanical interfaces. Plates (form 3)
ISO 9409-2:1997
0anipulating industrial ro$ots. 0echanical interfaces. Shafts (form 3)
ISO 9431:1999
&onstruction drawings. Spaces for drawing and for te/t% and title $locks on drawing sheets
ISO 9439:2001
;ater =uality. <valuation of ultimate aero$ic $iodegrada$ility of organic compounds in a=ueous
medium. &ar$on dio/ide evolution test
ISO 9454-2:2001
Soft soldering flu/es. &lassification and re=uirements. Performance re=uirements
ISO 9455-2:1996
Soft soldering flu/es. -est methods. Determination of non-volatile matter% e$ulliometric method
ISO 9455-3:1995
Soft soldering flu/es. -est methods. Determination of acid value% potentiometric and visual
titration methods
ISO 9455-6:1997
Soft soldering flu/es. -est methods. Determination and detection of halide (e/cluding fluoride)
content
ISO 9455-9:1996
Soft soldering flu/es. -est methods. Determination of ammonia content
ISO 9455-10:2001
Soft soldering flu/es. -est methods. >lu/ efficacy test% solder spread method
ISO 9455-12:1994
Soft soldering flu/es. -est methods. Steel tu$e corrosion test
ISO 9455-13:2000
Soft soldering flu/es. -est methods. Determination of flu/ spattering
ISO 9455-15:2000
Soft soldering flu/es. -est methods. &opper corrosion test
ISO 9455-16:2001
Soft soldering flu/es. -est methods. >lu/ efficacy tests% wetting $alance method
ISO 9455-17:2002
Soft soldering flu/es. -est methods. Surface insulation resistance com$ test and electrochemical
migration test of flu/ residues
ISO 9456:1997
"ptics and optical instruments. "pthalmic optics. 0arking of spectacle frames
ISO 9462:1993
3lpine ski-$indings. Safety re=uirements and test methods
ISO &' 9464:1998
Guide to the use of !S" ()*:-)6)EE)
ISO 9488:2000
Solar energy. 7oca$ulary
ISO%&' 9494:1997
Petroleum li=uids. 3utomatic pipeline sampling. Statistical assessment of performance of
automatic samplers determining the water content in hydrocar$on li=uids
ISO%IEC 9496:1995
&&!-- high level language (&1!22)
ISO 9509:1995
;ater =uality. 0ethod for assessing the inhi$ition of nitrification of activated sludge micro-
organisms $y chemicals and waste water
ISO 9512:2002
&igarettes. Determination of ventilation. Definitions and measurement principles
ISO 9513:2002
0etallic materials. &ali$ration of e/tensometers used in unia/ial testing
ISO 9514:1995
Paints and varnishes. Determination of the pot-life of li=uid systems. Preparation and
conditioning of samples and guidelines for testing
ISO 9518:1998
>orestry machinery. Porta$le chain-saws. Gick$ack test
ISO%IEC 9529-1:1989
!nformation processing systems. Data interchange on EA mm ('%( in) fle/i$le disk cartridges
using modified fre=uency modulation recording at )(E)* ftprad% on ,A tracks on each side.
Dimensional% physical and magnetic characteristics
ISO%IEC 9529-2:1989
!nformation processing systems. Data interchange on EA mm ('%( in) fle/i$le disk cartridges
using modified fre=uency modulation recording at )(E)* ftprad% on ,A tracks on each side. -rack
format
ISO%IEC 9541-1:1991
!nformation technology. >ont information interchange. 3rchitecture
ISO%IEC 9541-2:1991
!nformation technology. >ont information interchange. !nterchange format
ISO%IEC 9541-3:1994
!nformation technology. >ont information interchange. Glyph shape representation
ISO%IEC 9545:1994
!nformation technology. "pen Systems !nterconnection. 3pplication 2ayer structure
ISO &' 9547:1988
Programming language processors. -est methods. Guidelines for their development and
accepta$ility
ISO%IEC 9548-1:1996
!nformation technology. "pen systems interconnection. &onnectionless session protocol.
Protocol specification
ISO%IEC 9548-2:1995
!nformation technology. "pen systems interconnection. &onnectionless session protocol.
Protocol !mplementation &onformance Statement (P!&S) proforma
ISO%IEC 9549:1990
!nformation technology. Galvanic isolation of $alanced interchange circuits
ISO 9556:2001
Steel and iron. Determination of total car$on content. !nfrared a$sorption method after
com$ustion in an induction furnace
ISO 9568:1993
&inematography. Background acoustic noise levels in the theatres% review rooms and du$$ing
rooms
ISO%IEC &' 9573-11:1992
!nformation processing. SG02 support facilities. -echni=ues for using SG02. 3pplication at
!S" &entral Secretariat for !nternational Standards and -echnical #eports
ISO%IEC &' 9573-13:1991
!nformation processing. SG02 support facilities. -echni=ues for using SG02. Pu$lic entity sets
for mathematics and science
ISO%IEC 9574:1992
!nformation technology. Provision of the "S! connection-mode network service $y packet mode
terminal e=uipment to an integrated services digital network (!SD?)
ISO%IEC 9576-1:1995
!nformation technology. "pen systems interconnection. &onnectionless presentation protocol.
Protocol specification
ISO%IEC 9576-2:1995
!nformation technology. "pen systems interconnection. &onnectionless presentation protocol.
Protocol !mplementation &onformance Statement (P!&S) proforma
ISO%IEC &' 9577:1996
!nformation technology. Protocol identification in the network layer
ISO%IEC &' 9578:1990
!nformation technology. &ommunication interface connectors used in local area networks
ISO%IEC 9579:2000
!nformation technology. #emote data$ase access for S92 with security enhancement
ISO 9587:1999
0etallic and other inorganic coatings. Pretreatment of iron or steel to reduce the risk of hydrogen
em$rittlement
ISO 9588:1999
0etallic and other inorganic coatings. Post-coating treatments of iron and steel to reduce the risk
of hydrogen em$rittlement
ISO%IEC 9593-1:1990
!nformation technology. &omputer graphics. ProgrammerKs hierarchical interactive graphics
system (P1!GS) language $indings. >"#-#3?
ISO%IEC 9593-3:1990
!nformation technology. &omputer graphics. ProgrammerKs hierarchical interactive graphics
system (P1!GS) language $indings. 3da
ISO%IEC 9594-1:1995
!nformation technology. "pen systems interconnection. "verview of concepts% models and
services
ISO%IEC 9594-2:1995
!nformation technology. "pen systems interconnection. 0odels
ISO%IEC 9594-3:1995
!nformation technology. "pen systems interconnection. 3$stract service definition
ISO%IEC 9594-4:1995
!nformation technology. "pen systems interconnection. -he directory. Procedures for distri$uted
operation
ISO%IEC 9594-5:1995
!nformation technology. "pen systems interconnection. -he directory. Protocol specifications
ISO%IEC 9594-6:1995
!nformation technology. "pen systems interconnection. -he directory. Selected attri$ute types
ISO%IEC 9594-7:1995
!nformation technology. "pen systems interconnection. -he directory. Selected o$+ect classes
ISO%IEC 9594-8:1995
!nformation technology. "pen systems interconnection. -he directory. 3uthentication
framework
ISO%IEC 9594-9:1995
!nformation technology. "pen systems interconnection. #eplication
ISO%IEC 9595:1991
!nformation technology. "pen Systems !nterconnection. &ommon management information
service definition
ISO 9606-3:1999
3pproval testing of welders. >usion welding. &opper and copper alloys
ISO 9606-4:1999
3pproval testing of welders. >usion welding. ?ickel and nickel alloys
ISO 9606-5:2000
3pproval testing of welders. >usion welding. -itanium and titanium alloys% .irconium and
.irconium alloys
ISO 9611:1996
3coustics. &haracteri.ation of sources of structure-$orne sound with respect to sound radiation
from connected structures. 0easurement of velocity at the contact points of machinery when
resiliently mounted
ISO 9614-1:1995
3coustics. Determination of sound power levels of noise sources using sound intensity.
0easurement at discrete points
ISO 9614-2:1997
3coustics. Determination of sound power levels of noise sources using sound intensity.
0easurement $y scanning
ISO 9614-3:2002
3coustics. Determination of sound power levels of noise sources using sound intensity. Precision
method for measurement $y scanning
ISO 9622:1999
;hole milk. Determination of milkfat% protein and lactose content. Guidance on the operation of
mid-infrared instruments
ISO 9626:1995
Stainless steel needle tu$ing for the manufacture of medical devices
ISO 9633:2001
&ycle chains. &haracteristics and test methods
ISO%IEC 9636-1:1991
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). >unctional specification. "verview% profiles% and conformance
ISO%IEC 9636-2:1991
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). >unctional specification. &ontrol
ISO%IEC 9636-3:1991
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). >unctional specification. "utput
ISO%IEC 9636-4:1991
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). >unctional specification. Segments
ISO%IEC 9636-5:1991
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). >unctional specification. !nput and echoing
ISO%IEC 9636-6:1991
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). >unctional specification. #aster
ISO%IEC 9637-1:1994
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). Data stream $inding. &haracter encoding
ISO%IEC 9637-2:1992
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). Data stream $inding. Binary encoding
ISO%IEC 9638-3:1994
!nformation technology. &omputer graphics. !nterfacing techni=ues for dialogues with graphical
devices (&G!). 2anguage $indings. 3da
ISO%IEC 9646-3:1998
!nformation technology. "pen systems interconnection. &onformance testing methodology and
framework. -he -ree and ta$ular com$ined notation (--&?)
ISO 9653:2000
3dhesives. -est method for shear strength of adhesive $onds (!S" E*('6)EE,)
ISO%IEC 9661:1997
!nformation technology. Data interchange on )@%: mm wide magnetic tape cartridges. ), tracks%
) CE) data $ytes per millimetre
ISO 9664:1995
3dhesives. -est methods for fatigue properties of structural adhesives in tensile shear
ISO 9665:2000
3dhesives. 3nimal glues. 0ethods of sampling and testing (!S" E**(6)EE,)
ISO 9667:1998
3ircraft ground support e=uipment. -ow $ars
ISO 9669:1990
Series ) freight containers. !nterface connections for tank containers
ISO 9680:1996
Specification for dental operating light
ISO 9687:1996
Dental e=uipment. Graphical sym$ols
ISO 9692-2:1998
;elding and allied processes. 5oint preparation. Su$merged arc welding of steels
ISO 9692-3:2001
;elding and allied processes. 5oint preparation. 0etal inert gas welding and tungsten inert gas
welding of aluminium and its alloys
ISO 9692-4:2003
;elding and allied processes. 5oint preparation. &lad steels
ISO 9693:2000
0etal-ceramic dental restorative systems
ISO 9694:1999
Dental phosphate-$onded casting investments
ISO 9702:1999
Plastics. 3mine epo/ide hardeners. Determination of primary% secondary and tertiary amine
group nitrogen content
ISO 9703-3:1999
3naesthetic and respiratory care alarm signals. Guidance on application of alarms
ISO &' 9705-2:2001
#eaction to fire tests. >ull scale room tests for surface products. -echnical $ackground and
guidance
ISO 9706:2000
!nformation and documentation. Paper for documents. #e=uirements for permanence
ISO 9707:1995
!nformation and documentation. Statistics on the production and distri$ution of $ooks%
newspapers% periodicals and electronic pu$lications
ISO 9711-1:1990
>reight containers. !nformation related to containers on $oard vessels. Bay plan system
ISO 9711-2:1990
>reight containers. !nformation related to containers on $oard vessels. -ele/ data transmission
ISO 9735-1:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Synta/ rules common to all parts
ISO 9735-2:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Synta/ rules specific to $atch <D!
ISO 9735-3:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Synta/ rules specific to interactive <D!
ISO 9735-4:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Synta/ and service report message for $atch <D! (message type - &"?-#2)
ISO 9735-5:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Security rules for $atch <D! (authenticity% integrity and non-repudiation of
origin)
ISO 9735-6:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Secure authentication and acknowledgement message (message type
3D-3&G)
ISO 9735-7:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Security rules for $atch <D! (confidentiality)
ISO 9735-8:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. 3ssociated data in <D!
ISO 9735-9:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Security key and certificate management message (message type G<F03?)
ISO 9735-10:2002
<lectronic data interchange for administration% commerce and transport (<D!>3&-). 3pplication
level synta/ rules. Synta/ service directories
ISO 9736:2000
<ye-ends% in corrosion-resistant steel% threaded% for aircraft control wire rope. Dimensions and
loads
ISO 9737:2000
<ye-ends% in corrosion resisting steel% swaged on aircraft control wire rope. Dimensions and
loads
ISO 9738:2000
-urn$arrels% for aircraft control wire rope. Dimensions and loads
ISO 9747:2000
Dou$le shank $all-ends% in corrosion-resistant steel% swaged on aircraft control wire rope.
Dimensions and loads
ISO 9748:2000
Ball-ends% in corrosion-resistant steel% swaged on aircraft control wire rope. Dimensions and
loads
ISO 9749:2000
Stud-ends% in corrosion-resistant steel% swaged on aircraft control wire rope. Dimensions and
loads
ISO 9757:2000
>ork-ends% in corrosion-resistant steel% threaded% for aircraft control wire rope turn$arrels.
Dimensions and loads
ISO 9758:2000
>ork-ends% in corrosion-resistant steel% threaded% for rolling $earings% for aircraft control wire
rope. Dimensions and loads
ISO 9759:2000
>ork ends% in corrosion-resistant steel% swaged on aircraft control wire rope. Dimensions and
loads
ISO 9760:2000
3erospace. >ork-ends% in corrosion-resistant steel% swaged on aircraft control wire rope% for
rolling $earings. Dimensions and loads
ISO 9761:2000
2ocking clips% in corrosion-resistant steel% for aircraft control wire rope turn$uckles. Dimensions
ISO 9762:2000
3ircraft control wire rope assem$lies. Dimensions and end-fitting com$inations
ISO 9771:1997
Plastics. Phenolic resins. Determination of the pseudo-adia$atic temperature rise of li=uid resols
when cured under acid conditions
ISO 9772:2001
&ellular plastics. Determination of hori.ontal $urning characteristics of small specimens
su$+ected to a small flame
ISO 9773:1999
Plastics. Determination of $urning $ehaviour of thin fle/i$le vertical specimens in contact with a
small-flame ignition source
ISO 9785:2002
Ship and marine technology. 7entilation of cargo spaces where vehicles with internal
com$ustion engines are driven. &alculation of theoretical total airflow re=uired
ISO 9787:1999
0anipulating industrial ro$ots. &oordinate systems and motion nomenclatures
ISO%IEC 9796:1991
!nformation technology. Security techni=ues. Digital signature scheme giving message recovery
ISO%IEC 9796-2:2002
!nformation technology. Security techni=ues. Digital signature schemes giving message
recovery. !nteger factori.ation $ased mechanisms
ISO%IEC 9797:1994
!nformation technology. Security techni=ues. Data integrity mechanism using a cryptographic
check function employing a $lock cipher algorithm
ISO%IEC 9797-2:2002
!nformation technology. Security techni=ues. 0essage authentication codes (03&s).
0echanisms using a dedicated hash-function
ISO%IEC 9798-1:1997
!nformation technology. Security techni=ues. <ntity authentication mechanisms. General
ISO%IEC 9798-2:1999
!nformation technology. Security techni=ues. <ntity authentication mechanisms. 0echanisms
using symmetric encipherment algorithms
ISO%IEC 9798-3:1998
!nformation technology. Security techni=ues. <ntity authentication mechanisms. 0echanisms
using digital signature techni=ues
ISO%IEC 9798-4:1995
!nformation technology. Security techni=ues. <ntity authentication mechanisms. 0echanisms
using a cryptographic check function
ISO%IEC 9798-5:1999
!nformation technology. Security techni=ues. <ntity authentication mechanisms. 0echanisms
using .ero knowledge techni=ues
ISO 9801:1999
"phthalmic instruments. -rial case lenses
ISO 9802:1996
#aw optical glass. 7oca$ulary
ISO%IEC 9804:1998
!nformation technology. "pen systems interconnection. Service definition for the commitment%
concurrency and recovery service element
ISO%IEC 9805-1:1998
!nformation technology. "pen systems interconnection. Protocol for the commitment%
concurrency and recovery service element. Protocol specification
ISO%IEC 9805-2:1996
!nformation technology. "pen systems interconnection. Protocol for the commitment%
concurrency and recovery service element. Protocol implementation conformance statement
(P!&S) proforma
ISO 9831:1998
3nimal feeding stuffs% animal products% and faeces or urine. Determination of gross calorific
value. Bom$ calorimeter method
ISO 9832:2003
3nimal and vegeta$le fats and oils. Determination of residual technical he/ane content
ISO 9838:1991
3lpine ski-$indings. -est soles for ski-$inding tests
ISO 9843:2002
"il of cedarwood% &hinese type (B:!&upressus fune$risB:#% <ndlicher)
ISO 9849:2000
"ptics and optical instruments. Geodetic and surveying instruments. 7oca$ulary
ISO 9856:1996
&onveyor $elts. Determination of elastic modulus
ISO 9863-2:1996
Geote/tiles and geote/tile-related products. Determination of thickness at specified pressures.
Procedure for determination of thickness of single layers of multilayer products
ISO 9873:2000
Dental hand instruments. #eusa$le mirrors and handles
ISO 9875:2002
Ships and marine technology. 0arine echo-sounding e=uipment
ISO 9876:1995
Specification for marine facsimile receivers for meteorological charts
ISO 9876:1999
Ships and marine technology. 0arine facsimile receivers for meteorological charts
ISO 9886:2001
<valuation of thermal strain $y physiological measurements
ISO 9887:1995
;ater =uality. <valuation of the aero$ic $iodegrada$ility of organic compounds in an a=ueous
medium. Semi-continuous activated sludge method (S&3S)
ISO 9888:1999
;ater =uality. <valuation of ultimate aero$ic $iodegrada$ility of organic compounds in a=ueous
medium. Static test (4ahn-;ellens method)
ISO 9897:1997
>reight containers. &ontainer e=uipment data e/change (&<D<8). General communication
codes
ISO 9898:2000
<=uipment for crop protection. -est methods for air-assisted sprayers for $ush and tree crops
ISO%IEC 9899:1999
Programming languages. &
ISO 9902-1:2001
-e/tile machinery. ?oise test code. &ommon re=uirements
ISO 9902-2:2001
-e/tile machinery. ?oise test code. Spinning preparatory and spinning machinery
ISO 9902-3:2001
-e/tile machinery. ?oise test code. ?onwoven machines
ISO 9902-4:2001
-e/tile machinery. ?oise test code. Farn processing% cordage and rope manufacturing machines
ISO 9902-5:2001
-e/tile machinery. ?oise test code. ;eaving and knitting preparatory machinery
ISO 9902-6:2001
-e/tile machinery. ?oise test code. >a$ric manufacturing machines
ISO 9902-7:2001
-e/tile machinery. ?oise test code. Dyeing and finishing machines
ISO 9903-1:2003
-e/tile machinery and accessories. 0ain dimensions for section wires for metallic card clothing.
>oot without interlocking or interchaining
ISO 9903-2:2003
-e/tile machinery and accessories. 0ain dimensions for section wires for metallic card clothing.
>oot with interchaining
ISO 9905:1998
-echnical specifications for centrifugal pumps. &lass !
ISO 9906:2000
#otodynamic pumps. 1ydraulic performance acceptance tests. Grades ) and @
ISO 9908:1998
-echnical specifications for centrifugal pumps. &lass !!!
ISO 9913-1:1998
"ptics and optical instruments. &ontact lenses. Determination of o/ygen permea$ility and
transmissi$ility $y the >3-- method
ISO 9913-2:2000
"ptics and optical instruments. &ontact lenses. Determination of o/ygen permea$ility and
transmissi$ility $y the coulometric method
ISO 9914:1997
"ptics and optical instruments. &ontact lenses. Determination of refractive inde/ of contact lens
materials
ISO 9917-2:2000
Dental water-$ased cements. 2ight-activated cements
ISO 9920:1995
<rgonomics of the thermal environment. <stimation of the thermal insulation and evaporative
resistance of a clothing ensem$le
ISO 9921-1:1996
<rgonomic assessment of speech communication. Speech interference level and communication
distances for persons with normal hearing capacity in direct communication (S!2 method)
ISO 9923:1994
0icrographics. -ransparent 3* microfiche. !mage arrangements
ISO 9924-1:2000
#u$$er and ru$$er products. Determination of the composition of vulcani.ates and uncured
compounds $y thermogravimetry. Butadiene% ethylene-propylene copolymer and terpolymer%
iso$utene-isoprene% isoprene and styrene-$utadiene ru$$ers
ISO 9924-2:2000
#u$$er and ru$$er products. Determination of the composition of vulcani.ates and uncured
compounds $y thermogravimetry. 3crylonitrile-$utadiene and halo$utyl ru$$ers
ISO 9934-1:2001
?on-destructive testing. 0agnetic particle testing. General principles
ISO 9934-2:2002
?on-destructive testing. 0agnetic particle testing. Detection media
ISO 9934-3:2002
?on-destructive testing. 0agnetic particle testing. <=uipment
ISO 9944:1995
Plastics. Phenolic resins. Determination of electrical conductivity of resin e/tracts
ISO%IEC 9945-1:2002
!nformation technology. Porta$le operating system interface (P"S!8). Base Definitions
ISO%IEC 9945-2:2002
!nformation technology. Porta$le operating system interface (P"S!8). System !nterfaces
ISO%IEC 9945-3:2002
!nformation technology. Porta$le operating system interface (P"S!8). Shell and utilities
ISO%IEC 9945-4:2002
!nformation technology. Porta$le operating system interface (P"S!8). #ationale
ISO 9946:1999
0anipulating industrial ro$ots. Presentation of characteristics
ISO 9947:1991
-e/tile machinery and accessories. -wo-for-one twisters. 7oca$ulary
ISO 9956-10:1997
Specification and approval of welding procedures for metallic materials. ;elding procedure
specification for electron $eam welding
ISO 9956-11:1997
Specification and approval of welding procedures for metallic materials. ;elding procedure
specification for laser $eam welding
ISO 9963-1:1996
;ater =uality. Determination of alkalinity. Determination of total and composite alkalinity
ISO 9963-2:1996
;ater =uality. Determination of alkalinity. Determination of car$onate alkalinity
ISO 9967:1995
-hermoplastics pipes. Determination of creep ratio
ISO 9969:1995
-hermoplastics pipes. Determination of ring stiffness
ISO%IEC 9973:1994
!nformation technology. &omputer graphics and image processing. Procedures for registration of
graphical items
ISO 9974-1:2000
&onnections for general use and fluid power. Ports and stud ends with !S" @*) threads with
elastomeric or metal-to-metal sealing. -hreaded ports
ISO 9974-2:2000
&onnections for general use and fluid power. Ports and stud ends with !S" @*) threads with
elastomeric or metal-to-metal sealing. Stud ends with elastomeric sealing (type <)
ISO 9974-3:2000
&onnections for general use and fluid power. Ports and stud ends with !S" @*) threads with
elastomeric or metal-to-metal sealing. Stud ends with metal-to-metal sealing (type B)
ISO%IEC 9979:1999
!nformation technology. Security techni=ues. Procedures for the registration of cryptographic
algorithms
ISO 9981:1998
Belt drives. Pulleys and 7-ri$$ed $elts for the automotive industry. PG profile6dimensions
ISO 9982:1998
Belt drives. Pulleys and 7-ri$$ed $elts for industrial applications. P1% P5% PG% P2 and P0
profiles. Dimensions
ISO%IEC 9983:1989
!nformation processing systems. Designation of unrecorded fle/i$le disk cartridges
ISO 9988-1:1998
Plastics. Polyo/ymethylene (P"0) moulding and e/trusion materials. Designation system and
$asis for specifications
ISO 9988-2:1999
Plastics. Polyo/ymethylene (P"0) moulding and e/trusion materials. Preparation of test
specimens and determination of properties
ISO 9994:2002
2ighters. Safety specification
ISO 9997:2000
Dental cartridge syringes
ISO 9999:2002
-echnical aids for persons with disa$ilities. &lassification and terminology
ISO 10000 - 14997
ISO%IEC &' 10000-1:1995
!nformation technology. >ramework and ta/onomy of international standardi.ed profiles.
General principles and documentation framework
ISO%IEC &' 10000-2:1995
!nformation technology. >ramework and ta/onomy of international standardi.ed profiles.
Principles and ta/onomy for "S! profiles
ISO%IEC &' 10000-3:1995
!nformation technology. >ramework and ta/onomy of international standardi.ed profiles.
Principles and ta/onomy for open system environment profiles
ISO 10005:1995
9uality management. Guidelines for =uality plans
ISO 10006:2003
9uality management systems. Guidelines for =uality management in pro+ects
ISO 10007:2003
9uality management systems. Guidelines for configuration management
ISO 10012:2003
0easurement management systems. #e=uirements for measurement processes and measuring
e=uipment
ISO 10015:1999
9uality management. Guidelines for training
ISO%IEC 10021-1:1990
!nformation technology. -e/t communication. 0essage-oriented te/t interchange systems
(0"-!S). System and service overview
ISO%IEC 10021-2:1990
!nformation technology. 0essage handling systems (01S). !nformation technology. -e/t
communication. 0essage-oriented te/t interchange systems (0"-!S). "verall architecture
ISO%IEC 10021-2:1996
!nformation technology. 0essage handling systems (01S). "verall architecture
ISO%IEC 10021-4:1990
!nformation technology. -e/t communication. 0essage-oriented te/t interchange systems
(0"-!S). 0essage transfer system6 a$stract service definition and procedures
ISO%IEC 10022:1996
!nformation technology. "pen systems interconnection. Physical service definition
ISO%IEC 10025-2:1996
!nformation technology. -elecommunications and information e/change $etween systems.
-ransport conformance testing for connection-mode transport protocol operating over conection-
mode network service. 3$stract test suites and P!8!- for !S"!<& ,A:'6)E,, classes A% @ over
&"?S and C over &2?S
ISO%IEC 10025-3:1993
!nformation technology. -elecommunications and information e/change $etween systems.
-ransport conformance testing for connection-mode transport protocol operating over
connection-mode network service. -ransport test management protocol specification
ISO%IEC 10026-1:1998
!nformation technology. "pen systems interconnection. Distri$uted transaction processing. "S!
-P model
ISO%IEC 10026-2:1998
!nformation technology. "pen systems interconnection. Distri$uted transaction processing. "S!
-P service
ISO%IEC 10026-3:1998
!nformation technology. "pen systems interconnection. Distri$uted transaction processing.
Protocol specification
ISO%IEC 10026-4:1995
!nformation technology. "pen systems interconnection. Distri$uted transaction processing.
Protocol !mplementation &onformance Statement (P!&S) proforma
ISO%IEC 10026-5:1998
!nformation technology. "pen systems interconnection. Distri$uted transaction processing.
3pplication conte/t proforma and guidelines when using "S! -P
ISO%IEC 10026-6:1995
!nformation technology. "pen systems interconnection. Distri$uted transaction processing.
Dnstructured data transfer
ISO%IEC 10027:1990
!nformation technology. !nformation #esource Dictionary System (!#DS) framework
ISO%IEC 10028:1993
!nformation technology. -elecommunications and information e/change $etween systems.
Definition of the relaying functions of a network layer intermediate system
ISO%IEC 10030:1995
!nformation technology. -elecommunications and information e/change $etween systems. <nd
System #outeing !nformation </change protocol for use in con+unction with !S"!<& ,,:,
ISO%IEC &' 10034:1990
Guidelines for the preparation of conformity clauses in programming language standards
ISO%IEC 10035-2:1995
!nformation technology. "pen systems interconnection. &onnectionless protocol for the
3ssociation &ontrol Service <lement. Protocol implementation conformance (P!&S) proforma
ISO%IEC 10036:1996
!nformation technology. >ont information interchange. Procedures for registration of font-related
identifiers
ISO%IEC &' 10037:1991
!nformation technology. SG02 and -e/t-entry Systems. Guidelines for SG02 Synta/-Directed
<diting Systems
ISO%IEC 10040:1992
!nformation technology. "pen systems interconnection. Systems management overview
ISO 10045:1991
3lpine skis. Binding mounting area. #e=uirements for test screws
ISO 10054:1998
!nternal com$ustion compression-ignition engines. 0easurement apparatus for smoke from
engines operating under steady-state conditions. >ilter type smokemeter
ISO 10056:2001
0echanical vi$ration. 0easurement and analysis of whole-$ody vi$ration to which passengers
and crew are e/posed in railway vehicles
ISO 10058:1996
0agnesites and dolomites. &hemical analysis
ISO 10062:1995
&orrosion test in artificial atmospheres at very low concentrations of polluting gas(es)
ISO &' 10064-1:1992
&ylindrical gears. &ode of inspection practice. !nspection of corresponding flanks of gear teeth
ISO &' 10064-2:1996
&ylindrical gears. &ode of inspection practice. !nspection related to radial composite deviations%
runout% tooth thickness and $acklash
ISO &' 10064-3:1996
&ylindrical gears. &ode of inspection practice. #ecommendations relative to gear $lanks% shaft
centre distance and parallelism of a/es
ISO%&' 10064-4:1998
&ylindrical gears. &ode of inspection practice. #ecommendations relative to surface te/ture and
tooth contact pattern checking
ISO 10066:1998
>le/i$le cellular polymeric materials. Determination of creep in compression
ISO 10071-1:2001
-ools for pressing. Ball-lock punches. Ball-lock punches for light duty
ISO 10075-1:2000
<rgonomic principles related to mental workload. General terms and definitions (!S"
)AA:(6)EE))
ISO 10075-2:2000
<rgonomic principles related to mental workload. Design principles
ISO 10077-1:2000
-hermal performance of windows% doors and shutters. &alculation of thermal transmittance.
Simplified method
ISO 10079-1:2000
0edical suction e=uipment. <lectrically powered suction e=uipment. Safety re=uirements
ISO 10079-2:2000
0edical suction e=uipment. 0anually powered suction e=uipment
ISO 10079-3:2000
0edical suction e=uipment. Suction e=uipment powered from a vacuum or pressure source
ISO 10082:2000
Plastics. Phenolic resins. &lassification and test methods
ISO 10087:1996
Small craft. 1ull identification. &oding system
ISO 10088:2001
Small craft. Permanently installed fuel systems and fi/ed fuel tanks
ISO%IEC 10089:1991
!nformation technology. )'A mm rewrita$le optical disk cartridge for information interchange
ISO%IEC 10090:1992
!nformation technology. EA mm optical disk cartridges% rewrita$le and read only% for data
interchange
ISO%IEC &' 10091:1995
!nformation technology. -echnical aspects of )'A mm optical disk cartridge write-once recording
format
ISO 10093:1999
Plastics. >ire tests. Standard ignition sources
ISO 10099:2001
Pneumatic fluid power. &ylinders. >inal e/amination and acceptance criteria
ISO 10100:2001
1ydraulic fluid power. &ylinders. 3cceptance tests
ISO 10101-1:1998
?atural gas. Determination of water $y the Garl >ischer method. !ntroduction
ISO 10101-2:1998
?atural gas. Determination of water $y the Garl >ischer method. -itration procedure
ISO 10101-3:1998
?atural gas. Determination of water $y the Garl >ischer method. &oulometric procedure
ISO 10102:2001
3ssem$ly tools for screws and nuts. Dou$le-headed open-ended engineersK wrenches. 2ength of
wrenches and thickness of the heads
ISO 10103:2001
3ssem$ly tools for screws and nuts. Dou$le-headed% flat and offset% $o/ wrenches. 2ength of
wrenches and thickness of the heads
ISO 10104:2001
3ssem$ly tools for screws and nuts. Dou$le-headed% deep offset and modified offset% $o/
wrenches. 2ength of wrenches and thickness of the heads
ISO 10109-1:1994
"ptics and optical instruments. <nvironmental re=uirements. General information% definitions%
climatic .ones and their parameters
ISO 10109-4:2001
"ptics and optical instruments. <nvironmental re=uirements. -est re=uirements for telescopic
systems
ISO 10109-6:1994
"ptics and optical instruments. <nvironmental re=uirements. -est re=uirements for medical
optical devices
ISO 10109-7:2001
"ptics and optical instruments. <nvironmental re=uirements. -est re=uirements for optical
measuring instruments
ISO 10109-8:1994
"ptics and optical instruments. <nvironmental re=uirements. -est re=uirements for e/treme
conditions of use
ISO 10109-11:2001
"ptics and optical instruments. <nvironmental re=uirements. "ptical instruments for outdoor
conditions of use
ISO 10110-1:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
General
ISO 10110-2:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
0aterial imperfections. Stress $irefringence
ISO 10110-3:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
0aterial imperfections. Bu$$les and inclusions
ISO 10110-4:1997
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
0aterial imperfections. !nhomogeneity and striae
ISO 10110-5:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
Surface form tolerances
ISO 10110-6:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
&entring tolerances
ISO 10110-7:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
Surface imperfection tolerances
ISO 10110-8:1997
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
Surface te/ture
ISO 10110-9:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
Surface treatment and coating
ISO 10110-10:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems. -a$le
representing data of a lens element
ISO 10110-11:1996
"ptics and optical instruments. Preparation of drawings for optical elements and systems. ?on-
toleranced data
ISO 10110-12:1997
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
3spheric surfaces
ISO 10110-13:1997
"ptics and optical instruments. Preparation of drawings for optical elements and systems. 2aser
irradiation damage threshold
ISO 10110-14:2003
"ptics and optical instruments. Preparation of drawings for optical elements and systems.
;avefront deformation tolerance
ISO 10111:2002
0etallic and other inorganic coatings. 0easurement of mass per unit area. #eview of gravimetric
and chemical analysis methods
ISO%IEC 10116:1997
!nformation technology. Security techni=ues. 0odes of operation for an Bin-$it $lock cipher
ISO%IEC 10118-1:1994
!nformation technology.Security techni=ues.1ash-functions. General
ISO%IEC 10118-2:1994
!nformation technology.Security techni=ues.1ash-functions. 1ash-functions using an ?-$it $lock
cipher algorithm
ISO%IEC 10118-3:2003
!nformation technology. Security techni=ues. 1ash-functions. Dedicated hash-functions
ISO%IEC 10118-4:1998
!nformation technology. Security techni=ues. 1ash-functions. 1ash-functions using modular
arithmetic
ISO 10119:2002
&ar$on fi$re. Determination of density
ISO 10126-1:1991
Banking. Procedures for message encipherment (wholesale). General principles
ISO 10126-2:1991
Banking. Procedures for message encipherment (wholesale). D<3 algorithm
ISO 10133:2001
Small craft. <lectrical systems. </tra-low-voltage d.c. installations
ISO 10135:1994
-echnical drawings. Simplified representation of moulded% cast and forged parts
ISO 10139-2:2001
Dentistry. Soft lining materials for remova$le dentures. 0aterials for long-term use
ISO%IEC 10149:1989
!nformation technology. Data interchange on read-only )@A mm optical data disks (&D-#"0)
ISO 10154:1991
2ight gauge metal containers. -hree-piece necked-in tinplate aerosol cans. Dimensions of the top
end
ISO 10155:1995
Stationary source emissions. 3utomated monitoring of mass concentrations of particles.
Performance characteristics% test methods and specifications
ISO%IEC 10168-1:1997
!nformation technology. "pen systems interconnection. &onformance test suite for the session
protocol. -est suite structure and test purposes
ISO%IEC 10168-4:1996
!nformation technology. "pen systems interconnection. &onformance test suite for the session
protocol. -est management protocol specification
ISO%IEC 10169-1:1991
!nformation technology. "pen systems interconnection. &onformance test suite for the 3&S<
protocol. -est suite structure and test purposes
ISO%IEC 10170-1:1993
!nformation technology. "pen systems interconnection. &onformance test suite for the >-30
protocol. -est suite structure and test purposes
ISO%IEC &' 10171:1994
!nformation technology. -elecommunications and information e/change $etween systems. 2ist
of standard data link layer protocols that utili.e 1igh-2evel Data 2ink &ontrol (1D2&) classes
of procedures and list of standardi.ed 8!D format identifiers and private parameter set
identification values
ISO%IEC &' 10172:1991
!nformation technology. -elecommunications and information e/change $etween systems.
?etwork -ransport Protocol interworking specification
ISO%IEC 10173:1998
!nformation technology. -elecommunications and information e/change $etween systems.
!nterface connector and contact assignments for !SD? primary rate access connector located at
reference points S and -
ISO%IEC 10177:1993
!nformation technology. -elecommunications and information e/change $etween systems.
Provision of the connection-mode ?etwork internal layer service $y intermediate systems using
!S"!<& ,@A,% the 8.@( Packet 2ayer Protocol
ISO%IEC 10181-1:1996
!nformation technology. "pen systems interconnection. Security frameworks for open systems.
"verview
ISO%IEC 10181-2:1996
!nformation technology. "pen systems interconnection. Security frameworks for open systems.
3uthentication framework
ISO%IEC 10181-3:1996
!nformation technology. "pen systems interconnection. Security frameworks for open systems.
3ccess control framework
ISO%IEC 10181-4:1997
!nformation technology. "pen systems interconnection. Security frameworks for open systems.
?on-repudiation framework
ISO%IEC 10181-5:1996
!nformation technology. "pen systems interconnection. Security frameworks for open systems.
&onfidentiality framework
ISO%IEC 10181-6:1996
!nformation technology. "pen systems interconnection. Security frameworks for open systems.
!ntegrity framework
ISO%IEC 10181-7:1996
!nformation technology. "pen systems interconnection. Security frameworks for open systems.
Security audit and alarms framework
ISO%IEC &' 10182:1993
!nformation technology. Programming languages% their environments and system software
interfaces. Guidelines for language $indings
ISO &' 10193:1989
#ound general use light gauge metal containers. ?ominal filling volumes and nominal diameters
ISO &' 10194:1989
?on-round general use light gauge metal containers. ?ominal filling volumes and nominal cross-
sections
ISO 10197:1993
0icrographics. #eader-printers for transparent microforms. &haracteristics
ISO 10198:1994
0icrographics. #otary camera for )* mm microfilm. 0echanical and optical characteristics
ISO 10202-2:1996
>inancial transaction cards. Security architecture of financial transaction systems using
integrated circuit cards. -ransaction process
ISO 10202-5:1998
>inancial transaction cards. Security architecture of financial transaction systems using
integrated circuit cards. Dse of algorithms
ISO 10202-7:1998
>inancial transaction cards. Security architecture of financial transaction systems using
integrated circuit cards. Gey management
ISO 10202-8:1998
>inancial transaction cards. Security architecture of financial transaction systems using
integrated circuit cards. General principles and overview
ISO%IEC 10206:1991
!nformation technology. Programming languages. </tended Pascal
ISO 10209-1:1992
-echnical product documentation. 7oca$ulary. -erms relating to technical drawings6 General
and types of drawings
ISO 10209-2:1996
-echnical product documentation. 7oca$ulary. -erms relating to pro+ection methods
ISO 10211-1:1996
-hermal $ridges in $uilding construction. 1eat flows and surface temperatures. General
calculation methods
ISO 10211-2:2001
-hermal $ridges in $uilding construction. 1eat flows and surface temperatures. 2inear thermal
$ridges
ISO 10223:1992
-e/tile machinery. >lat warp knitting machines. ?um$ering of guide $ars
ISO 10227:1996
1umanhuman surrogate impact (single shock) testing and evaluation. Guidance on technical
aspects
ISO 10228:1991
&ross-country skis. Binding mounting area. #e=uirements for test screws
ISO 10231:2003
0otorcycle tyres. -est methods for verifying tyre capa$ilities
ISO &' 10232:1989
General-purpose flat pallets for through transit of goods. Design rating and ma/imum working
load
ISO &' 10233:1989
General purpose flat pallets for through transit of goods. Performance re=uirements
ISO 10239:2000
Small craft. 2i=uified petroleum gas (2PG) systems
ISO 10240:1996
Small craft. "wnerKs manual
ISO 10242-1:1998
-ools for pressing. Punch holder shanks. -ype 3
ISO 10248:2000
>luid fertili.ers. De-aeration of suspension samples $y film disentrainment
ISO 10249:2000
>luid fertili.ers. Preliminary visual e/amination and preparation of samples for physical testing
ISO 10253:1998
;ater =uality. 0arine algal growth inhi$ition test with B:!Skeletonema costatumB:# and
B:!Phaeodactylum tricornutumB:#
ISO 10270:1995
&orrosion of metals and alloys. 3=ueous corrosion testing of .irconium alloys for use in nuclear
power reactors
ISO 10271:2001
Dental metallic materials. &orrosion test methods
ISO 10273:2003
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the detection of
presumptive pathogenic B:!Fersinia enterocoliticaB:#
ISO%IEC 10279:1991
!nformation technology. Programming languages. >ull B3S!&
ISO 10280:1995
Steel and iron. Determination of titanium content. Diantipyrylmethane spectrophotometric
method
ISO 10289:2001
0ethods for corrosion testing of metallic and other inorganic coatings on metallic su$strates.
#ating of test specimens and manufactured articles su$+ected to corrosion tests
ISO 10290:1993
-e/tiles. &otton yarns. Specifications
ISO 10294-1:1996
>ire-resistance tests. >ire dampers for air distri$ution systems. -est method
ISO 10294-2:1999
>ire-resistance tests. >ire dampers for air distri$ution systems. &lassification% criteria and field of
application of test results
ISO 10294-3:1999
>ire-resistance tests. >ire dampers for air distri$ution systems. Guidance on the test method
ISO 10294-4:2001
>ire-resistance tests. >ire dampers for air distri$ution systems. -est of thermal release
mechanism
ISO 10299:2000
3erospace. #ivets% solid. 0aterial and metric series identification
ISO 10300-1:2001
&alculation of load capacity of $evel gears. &alculation of load capacity of $evel gears.
!ntroduction and general influence factors
ISO 10300-2:2001
&alculation of load capacity of $evel gears. &alculation of surface dura$ility (pitting)
ISO 10300-3:2001
&alculation of load capacity of $evel gears. &alculation of tooth root strength
ISO 10301:1997
;ater =uality. Determination of highly volatile halogenated hydrocar$ons. Gas-chromatographic
methods
ISO 10303-1:1994
!ndustrial automation systems and integration. Product data representation and e/change.
"verview and fundamental principles
ISO 10303-11:1994
!ndustrial automation systems and integration. Product data representation and e/change.
Description methods6 the <8P#<SS language reference manual
ISO%&' 10303-12:1997
!ndustrial automation systems and integration. Product data representation and e/change.
Description methods. -he <8P#<SS-! language reference manual
ISO 10303-21:1994
!ndustrial automation systems and integration. Product data representation and e/change.
!mplementation methods. &lear te/t encoding of the e/change structure
ISO 10303-22:1998
!ndustrial automation systems and integration. Product data representation and e/change.
!mplementation methods. Standard data access interface
ISO 10303-31:1994
!ndustrial automation systems and integration. Product data representation and e/change.
&onformance testing methodology and framework6 general concepts
ISO 10303-32:1998
!ndustrial automation systems and integration. Product data representation and e/change.
&onformance testing methodology and framework6 #e=uirements on testing la$oratories and
clients
ISO 10303-41:1994
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated generic resources. >undamentals of product description and support
ISO 10303-42:1994
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated generic resources. Geometric and topological representation
ISO 10303-43:1994
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated generic resources6 #epresentation structures
ISO 10303-44:1994
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated generic resources6 Product structure configuration
ISO 10303-45:1998
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated generic resource6 0aterials
ISO 10303-46:1994
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated generic resources6 visual presentation
ISO 10303-47:1997
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated generic resource. Shape variation tolerances
ISO 10303-49:1998
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated generic resources6 Process structure and properties
ISO 10303-101:1994
!ndustrial automation systems and integration. Product data representation and e/change.
!ntegrated application resources6 Draughting
ISO 10303-201:1994
!ndustrial automation systems and integration. Product data representation and e/change.
3pplication protocol6 </plicit draughting
ISO 10303-203:1994
!ndustrial automation systems and integration. Product data representation and e/change.
3pplication protocol. &onfiguration controlled design
ISO 10303-210:2002
!ndustrial automation systems and integration. Product data representation and e/change.
3pplication protocol. <lectronic assem$ly% interconnection% and packaging design
ISO 10304-1:1995
;ater =uality. Determination of dissolved anions $y li=uid chromatography of ions.
Determination of fluoride% chloride% nitrite% orthophosphate% $romide% nitrate and sulfate ions.
0ethod for water with low contamination
ISO 10304-2:1997
;ater =uality. Determination of dissolved anions $y li=uid chromatography of ions.
Determination of $romide% chloride% nitrate% nitrite% orthophosphate and sulfate in waste water
ISO 10304-3:1997
;ater =uality. Determination of dissolved anions $y li=uid chromatography of ions.
Determination of chromate% iodide% sulfite% thiocyanate and thiosulfate
ISO 10304-4:2000
;ater =uality. Determination of dissolved anions $y li=uid chromatography of ions.
Determination of dissolved chlorate% chloride and chlorite in water with low contamination
ISO 10306:1995
-e/tiles. &otton fi$res. <valuation of maturity $y the air flow method
ISO 10308:1997
0etallic coatings. #eview of porosity tests
ISO 10312:1995
3m$ient air. Determination of as$estos fi$res. Direct-transfer transmission electron microscopy
method
ISO 10319:1996
Geote/tiles. ;ide-width tensile test
ISO 10320:1999
Geote/tiles and geote/tile-related products. !dentification on site
ISO 10321:1996
Geote/tiles. -ensile test for +ointsseams $y wide-width method
ISO 10322-1:1997
"phthalmic optics. Semi-finished spectacle lens $lanks. Specifications for single-vision and
multifocal lens $lanks
ISO 10322-2:1997
"phthalmic optics. Semi-finished spectacle lens $lanks. Specifications for progressive power
lens $lanks
ISO 10323:1996
Dental rotary instruments. Bore diameters for discs and wheels
ISO 10326-2:2001
0echanical vi$ration. 2a$oratory method for evaluating vehicle seat vi$ration. 3pplication to
railway vehicles
ISO 10328-1:1996
Prosthetics.Structural testing of lower-lim$ prostheses. -est configurations
ISO 10328-2:1996
Prosthetics.Structural testing of lower-lim$ prostheses. -est samples
ISO 10328-3:1996
Prosthetics.Structural testing of lower-lim$ prostheses. Principal structural tests
ISO 10328-4:1996
Prosthetics.Structural testing of lower-lim$ prostheses. 2oading parameters of principal
structural tests
ISO 10328-5:1996
Prosthetics.Structural testing of lower-lim$ prostheses. Supplementary structural tests
ISO 10328-6:1996
Prosthetics.Structural testing of lower-lim$ prostheses. 2oading parameters of supplementary
structural tests
ISO 10328-7:1996
Prosthetics.Structural testing of lower-lim$ prostheses. -est su$mission document
ISO 10328-8:1996
Prosthetics.Structural testing of lower-lim$ prostheses. -est report
ISO 10330:2002
Photography. Synchroni.ers% ignition circuits and connectors for cameras and photoflash units.
<lectrical characteristics and test methods
ISO 10338:1998
"ptics and optical instruments. &ontact lenses. Determination of curvature
ISO 10339:1999
"phthalmic optics. &ontact lenses. Determination of water content of hydrogel lenses
ISO 10340:1997
"ptics and optical instruments. &ontact lenses. 0ethod for determination of solvent e/tracta$le
su$stances
ISO 10341:1999
"phthalmic instruments. #efractor heads
ISO 10342:2003
"phthalmic instruments. <ye refractometers
ISO 10343:1999
"phthalmic instruments. "phthalmometers
ISO 10344:1998
"ptics and optical instruments. &ontact lenses. Saline solution for contact lens testing
ISO 10347:1999
;orm gears. Geometry of worms. ?ame plates for worm gear units% centre distances%
information to $e supplied to gear manufacturer $y the purchaser
ISO 10348:1993
Photography. Processing wastes. Determination of silver content
ISO 10349-1:2002
Photography. Photographic-grade chemicals. -est methods. General
ISO 10349-8:2002
Photography. Photographic-grade chemicals. -est methods. Determination of volatile matter
ISO 10349-13:2002
Photography. Photographic-grade chemicals. -est methods. Determination of p1
ISO 10350-1:2001
Plastics. 3c=uisition and presentation of compara$le single-point data. 0oulding materials
ISO 10350-2:2001
Plastics. 3c=uisition and presentation of compara$le single-point data. 2ong-fi$re-reinforced
plastic
ISO 10352:1997
>i$re-reinforced plastics. 0oulding compounds and prepregs. Determination of mass per unit
area
ISO 10356:1996
&inematography. Storage and handling of nitrate-$ase motion-picture films
ISO 10360-1:2001
Geometrical product specifications (GPS). 3cceptance and reverification tests for coordinate
measuring machines (&00). 7oca$ulary
ISO 10360-2:2002
Geometrical product specifications (GPS). 3cceptance and reverification tests for coordinate
measuring machines (&00). &00s used for measuring si.e
ISO 10360-3:2001
Geometrical product specifications (GPS). 3cceptance and reverification tests for coordinate
measuring machines (&00). &00s with the a/is of the rotary ta$le as the fourth a/is
ISO 10360-4:2001
Geometrical product specifications (GPS). 3cceptance and reverification tests for coordinate
measuring machines (&00). &00s used in scanning measuring mode
ISO 10360-5:2001
Geometrical product specifications (GPS). 3cceptance and reverification tests for coordinate
measuring machines (&00). &00s using multiple stylus pro$ing systems
ISO 10360-6:2001
Geometrical product specifications (GPS). 3cceptance and reverification tests for coordinate
measuring machines (&00). <stimation of errors in computing Gaussian associated features
ISO 10361:2000
-e/tile floor coverings. Production of changes in appearance $y means of 7ettermann drum and
he/apod tum$ler testers
ISO 10363:1995
1ot-melt adhesives. Determination of thermal sta$ility
ISO 10365:1995
3dhesives. Designation of main failure patterns
ISO 10366-1:2002
Plastics. 0ethyl methacrylateacrylonitrile$utadienestyrene (03BS) moulding and e/trusion
materials. Designation system and $asis for specifications
ISO 10366-2:1999
Plastics. 0ethyl methacrylateacrylonitrile$utadienestyrene (03BS) moulding and e/trusion
materials. Preparation of test specimens and determination of properties
ISO%IEC 10367:1991
!nformation technology. Standardi.ed coded graphic character sets for use in ,-$it codes
ISO 10368:1992
>reight thermal containers. #emote condition monitoring
ISO 10370:1996
Petroleum products. Determination of car$on residue. 0icro method
ISO 10371:1993
>i$re reinforced plastics. Braided tapes for composite materials reinforcement. Basis for a
specification
ISO 10372:1992
1ydraulic fluid power. >our-and five-port servovalves. 0ounting surfaces
ISO%IEC 10373-1:1998
!dentification cards. -est methods. General characteristics tests
ISO%IEC 10373-2:1998
!dentification cards. -est methods. &ards with magnetic stripes
ISO%IEC 10373-3:2001
!dentification cards. -est methods. !ntegrated circuit(s) cards with contacts and related interface
devices
ISO%IEC 10373-5:1998
!dentification cards. -est methods. "ptical memory cards
ISO%IEC 10373-6:2001
!dentification cards. -est methods. Pro/imity cards
ISO%IEC 10373-7:2001
!dentification cards. -est methods. 7icinity cards
ISO 10374:1998
>reight containers. 3utomatic identification
ISO 10380:2003
Pipework. &orrugated metal hoses and hose assem$lies
ISO 10381-1:2002
Soil =uality. Sampling. Guidance on the design of sampling programmes
ISO 10381-2:2002
Soil =uality. Sampling. Guidance on sampling techni=ues
ISO 10381-3:2001
Soil =uality. Sampling. Guidance on safety
ISO 10405:2000
Petroleum and natural gas industries. &are and use of casing and tu$ing
ISO 10414-1:2001
Petroleum and natural gas industries. >ield testing of drilling fluids. ;ater-$ased fluids
ISO 10414-2:2002
Petroleum and natural gas industries. >ield testing of drilling fluids. "il-$ased fluids
ISO 10416:2002
Petroleum and natural gas industries. Drilling fluids. 2a$oratory testing
ISO 10423:2001
Petroleum and natural gas industries. Drilling and production e=uipment. ;ellhead and
christmas tree e=uipment
ISO 10425:2003
Steel wire ropes for the petroleum and natural gas industries. 0inimum re=uirements and terms
of acceptance
ISO 10426-1:2000
Petroleum and natural gas industries. &ements and materials for well cementing. Specification
ISO 10426-3:2003
Petroleum and natural gas industries. &ements and materials for well cementing. -esting of
deepwater well cement formulations
ISO 10427-1:2002
Petroleum and natural gas industries. &asing centrali.ers. Bow-spring casing centrali.ers
ISO 10432:2000
Petroleum and natural gas industries. Downhole e=uipment. Su$surface safety valve e=uipment
ISO 10437:2003
Petroleum% petrochemical and natural gas industries. Steam tur$ines. Special-purpose
applications
ISO 10439:2002
Petroleum% chemical and gas service industries. &entrifugal compressors
ISO 10440-1:2001
Petroleum and natural gas industries. #otary-type positive-displacement compressors. Process
compressors (oil-free)
ISO 10440-2:2001
Petroleum and natural gas industries. #otary-type positive-displacement compressors. Packaged
air compressors (oil-free)
ISO 10441:1999
Petroleum and natural gas industries. >le/i$le couplings for mechanical power transmission.
Special purpose applications
ISO 10442:2002
Petroleum% chemical and gas service industries. Packaged% integrally geared centrifugal air
compressors
ISO 10451:2002
Dental implant systems. &ontents of technical file
ISO 10456:2000
Building materials and products. Procedures for determining declared and design thermal values
ISO 10457:2002
-e/tile machinery. Dyeing and finishing machines. ?ominal speeds
ISO 10458:1993
-e/tile machinery. S=uare $ars for winding devices relating to dyeing and finishing machines.
Dimensions
ISO 10459:1992
-e/tile machinery. Dyeing and finishing machines. Designation of operating ranges of
component parts
ISO 10472-1:1998
Safety re=uirements for industrial laundry machinery. &ommon re=uirements
ISO 10472-2:1998
Safety re=uirements for industrial laundry machinery. ;ashing machines and washer-e/tractors
ISO 10472-3:1998
Safety re=uirements for industrial laundry machinery. ;ashing tunnel lines including component
machines
ISO 10472-4:1998
Safety re=uirements for industrial laundry machinery. 3ir dryers
ISO 10472-5:1998
Safety re=uirements for industrial laundry machinery. >latwork ironers% feeders and folders
ISO 10472-6:1998
Safety re=uirements for industrial laundry machinery. !roning and fusing presses
ISO 10477:1996
Dentistry. Polymer-$ased crown and $ridge materials
ISO 10484:1997
;idening test on nuts
ISO &' 10495:1997
&ylindrical gears. &alculation of service life under varia$le load. &onditions for cylindrical gears
in accordance with !S" *''*
ISO 10504:2000
Starch derivatives. Determination of the composition of glucose syrups% fructose syrups and
hydrogenated glucose syrups. 0ethod using high-performance li=uid chromatography
ISO 10510:2000
-apping screw and washer assem$lies with plain washers
ISO 10511:1998
Prevailing tor=ue type he/agon thin nuts (with non-metallic insert)
ISO 10512:1998
Prevailing tor=ue type he/agon nuts (with non-metallic insert)% style )% with metric fine pitch
thread. Property classes *% , and )A
ISO 10513:1998
Prevailing tor=ue type all-metal he/agon nut% style @% with metric fine pitch thread. Property
classes ,% )A and )@
ISO%IEC 10514-1:1996
!nformation technology. Programming languages. 0odula-@% $ase language
ISO%IEC 10514-2:1998
!nformation technology. Programming languages. 0odula-@% generics in 0odula-@
ISO%IEC 10514-3:1998
!nformation technology. Programming languages. 0odula-@% o$+ect-oriented 0odula-@
ISO 10519:2001
#apeseed. Determination of chlorophyll content. Spectrometric method
ISO 10520:1998
?ative starch. Determination of starch content. <wers polarimetric method
ISO 10525:1997
&ounter$alanced trucks handling freight containers of * m (@A ft) length and a$ove. 3dditional
sta$ility tests
ISO 10526:1999
&!< standard illuminants for colorimetry
ISO%CIE 10527:1991
&!< standard colorimetric o$servers
ISO 10528:1995
-e/tiles. &ommercial laundering procedure for te/tile fa$rics prior to flamma$ility testing
ISO 10531:1992
Packaging. &omplete% filled transport packages. Sta$ility testing of unit loads
ISO 10534-1:2001
3coustics. Determination of sound a$sorption coefficient and impedance in impedances tu$es.
0ethod using standing wave ratio
ISO 10534-2:2001
3coustics. Determination of sound a$sorption coefficient and impedance in impedance tu$es.
-ransfer-function method
ISO 10535:1998
1oists for the transfer of disa$led persons. #e=uirements and test methods
ISO%IEC 10536-1:2000
!dentification cards. &ontactless integrated circuit(s) cards. &lose-coupled cards. Physical
characteristics
ISO%IEC 10538:1991
!nformation technology. &ontrol functions for te/t communication
ISO 10539:2002
3nimal and vegeta$le fats and oils. Determination of alkalinity
ISO 10540-1:2003
3nimal and vegeta$le fats and oils. Determination of phosphorus content. &olorimetric method
ISO 10540-2:2003
3nimal and vegeta$le fats and oils. Determination of phosphorus content. 0ethod using graphite
furnace atomic a$sorption spectrometry
ISO 10540-3:2002
3nimal and vegeta$le fats and oils. Determination of phosphorus content. 0ethod using
inductively coupled plasma (!&P) optical emission spectroscopy
ISO 10542-1:2001
-echnical systems and aids for disa$led or handicapped persons. ;heelchair tiedown and
occupant-restraint systems. #e=uirements and test methods for all systems
ISO 10542-2:2001
-echnical systems and aids for disa$led or handicapped persons. ;heelchair tiedown and
occupant-restraint systems. >our-point strap-type tiedown systems
ISO 10545-1:1997
&eramic tiles. Sampling and $asis for acceptance
ISO 10545-2:1997
&eramic tiles. Determination of dimensions and surface =uality
ISO 10545-3:1997
&eramic tiles. Determination of water a$sorption% apparent porosity% apparent relative density
and $ulk density
ISO 10545-4:1997
&eramic tiles. Determination of modulus of rupture and $reaking strength
ISO 10545-5:1998
&eramic tiles. Determination of impact resistance $y measurement of coefficient of restitution
ISO 10545-6:1997
&eramic tiles. Determination of resistance to deep a$rasion for ungla.ed tiles
ISO 10545-7:1999
&eramic tiles. Determination of resistance to surface a$rasion for gla.ed tiles
ISO 10545-8:1996
&eramic tiles. Determination of linear thermal e/pansion
ISO 10545-9:1996
&eramic tiles. Determination of resistance to thermal shock
ISO 10545-10:1997
&eramic tiles. Determination of moisture e/pansion
ISO 10545-11:1996
&eramic tiles. Determination of cra.ing resistance for gla.ed tiles
ISO 10545-12:1997
&eramic tiles. Determination of frost resistance
ISO 10545-13:1997
&eramic tiles. Determination of chemical resistance
ISO 10545-14:1997
&eramic tiles. Determination of resistance to stains
ISO 10545-15:1997
&eramic tiles. Determination of lead and cadmium given off $y gla.ed tiles
ISO 10545-16:2000
&eramic tiles. Determination of small colour differences
ISO 10548:2003
&ar$on fi$re. Determination of si.e content
ISO 10550:1994
0icrographics. Planetary camera systems. -est target for checking performance
ISO 10551:2001
<rgonomics of the thermal environment. 3ssessment of the influence of the thermal environment
using su$+ective +udgement scales
ISO 10553:2003
1orology. Procedure for evaluating the accuracy of =uart. watches
ISO 10555-1:1997
Sterile% single-use intravascular catheters. General re=uirements
ISO 10555-2:1997
Sterile% single-use intravascular catheters. 3ngiographic catheters
ISO 10555-3:1997
Sterile% single-use intravascular catheters. &entral venous catheters
ISO 10555-4:1997
Sterile% single-use intravascular catheters. Balloon dilatation catheters
ISO 10555-5:1997
Sterile% single-use intravascular catheters. "ver-needle peripheral catheters
ISO 10563:1998
Building construction. Sealants for +oints. Determination of change in mass and volume
ISO 10564:1997
Soldering and $ra.ing materials. 0ethods for the sampling of soft solders for analysis
ISO 10565:1998
"ilseeds. Simultaneous determination of oil and water contents. 0ethods using pulsed nuclear
magnetic resonance spectrometry
ISO 10578:1992
-echnical drawings. -olerancing of orientation and location. Pro+ected tolerance .one
ISO 10579:1993
-echnical drawings. Dimensioning and tolerancing. ?on-rigid parts
ISO 10585:1996
!nformation and documentation. 3rmenian alpha$et coded character set for $i$liographic
information interchange
ISO 10586:1996
!nformation and documentation. Georgian alpha$et coded character set for $i$liographic
information interchange
ISO 10587:2000
0etallic and other inorganic coatings. -est for residual em$rittlement in $oth metallic-coated
and uncoated e/ternally-threaded articles and rods. !nclined wedge method
ISO%IEC 10588:1993
!nformation technology. Dse of 8.@( packet layer protocol in con+unction with 8.@)8.@) $is to
provide the "S! connection-mode network service
ISO 10590:1998
Building construction. Sealants. Determination of adhesioncohesion properties at maintained
e/tension after immersion in water
ISO 10591:1998
Building construction. Sealants. Determination of adhesioncohesion properties after immersion
in water
ISO 10592:1995
Small craft. 1ydraulic steering systems
ISO 10594:1997
0icrographics. #otary camera systems. -est target for checking performance
IS" 10607-2:1997
!nformation technology. !nternational standardi.ed profiles 3>-nn. >ile transfer% access and
management. Definition of document types% constraint sets and synta/es
IS" 10607-3:1997
!nformation technology. !nternational standardi.ed profiles 3>-nn. >ile transfer% access and
management. 3>-)). Simple file transfer service (unstructured) (regional variant of !S"!<&
!SP )A*A:-'6)EE()
IS" 10607-4:1997
!nformation technology. !nternational standardi.ed profiles 3>-nn. >ile transfer% access and
management. 3>-)@. Positional file transfer service (flat) (regional variant of !S"!<& !SP
)A*A:-C6)EE()
IS" 10607-5:1997
!nformation technology. !nternational standardi.ed profiles 3>-nn. >ile transfer% access and
management. 3>-@@. Positional file access service (flat) (regional variant of !S"!<& !SP
)A*A:-(6)EE()
IS" 10607-6:1997
!nformation technology. !nternational standardi.ed profiles 3>-nn. >ile transfer% access and
management. 3>-'. >ile management service
IS" 10608-2:1995
!nformation technology. !nternational standardi.ed profile -3nnnn. &onnection-mode transport
service over connectionless-mode network service. -3() profile including su$network-
dependent re=uirements for &S03&D 2ocal area networks (23?s)
IS" 10608-4:1997
!nformation technology. !nternational standardi.ed profile -3nnnn. &onnection-mode transport
service over connectionless-mode network service. Definition of profile -3('% operation over a
token ring 23? su$network
ISO%IEC IS" 10608-5:1992
!nformation technology. !nternational standardi.ed profile -3nnnn. &onnection-mode transport
service over connectionless-mode network service. -3))))-3))@) profiles including
su$network-dependent re=uirements for 8.@( packet-switched data networks using virtual calls
IS" 10608-6:1997
!nformation technology. !nternational standardi.ed profile -3nnnn. &onnection-mode transport
service over connectionless-mode network service. Definition of profile -3(C% operation over an
>DD! 23? su$network
IS" 10608-13:1997
!nformation technology. !nternational standardi.ed profile -3nnnn. &onnection-mode transport
service over connectionless-mode network service. 03& su$layer and physical layer dependent
re=uirements for a token ring 23? su$network
ISO%IEC IS" 10608-14:1995
!nformation technology. !nternational standardi.ed profile -3nnnn. &onnection-mode transport
service over connectionless-mode network service. 03&% P1F and P0D su$layer dependent
and Station 0anagement re=uirements over an >DD! 23? su$network
ISO%IEC IS" 10609-1:1992
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Su$network-type independent
re=uirements for Group -B
IS" 10609-2:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Su$network-type independent
re=uirements for group -&
IS" 10609-3:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Su$network-type independent
re=uirements for group -D
IS" 10609-4:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Su$network-type independent
re=uirements for group -<
ISO%IEC IS" 10609-5:1992
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Definition of profiles
-B))))-B))@)
IS" 10609-6:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Definition of profiles
-&))))-&))@)
IS" 10609-7:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Definition of profiles
-D))))-D))@)
IS" 10609-8:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Definition of profiles
-<))))-<))@)
IS" 10609-10:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. 23? su$network-dependent%
media-independent re=uirements
IS" 10609-11:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. &S03&D su$network-
dependent% media-dependent re=uirements
IS" 10609-12:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Definition of profile -&()%
provision of the "S! connection-mode transport service using the "S! connection-mode network
service in an end system attached to a &S03&D 23?
IS" 10609-14:1997
!nformation technology. !nternational standardi.ed profiles -B% -&% -D and -<. &onnection-
mode transport service over connection-mode network service. Definition of profile -&('%
provision of the "S! connection-mode transport service using the "S! connection-mode network
service in an end system attached to a token ring 23?
IS" 10610-1:1995
!nformation technology. !nternational standardi.ed profile >"D)). "pen document format6
simple document structure. &haracter content architecture only. Document 3pplication Profile
(D3P)
IS" 10612-1:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. Su$network-independent re=uirements
IS" 10612-2:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. &S03&D 23? su$network-dependent% media-dependent re=uirements
IS" 10612-3:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. -oken ring 23? su$network-dependent% media-dependent re=uirements
IS" 10612-4:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. Profile #D().() (&S03&D 23? - &S03&D 23?)
IS" 10612-5:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. Profile #D().(C (&S03&D 23? - >DD! 23?)
IS" 10612-6:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. Profile #D(C.(C (>DD! 23? - >DD! 23?)
IS" 10612-7:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. Profile #D().(' (&S03&D 23? - token ring 23?)
IS" 10612-8:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. Profile #D('.(' (token ring 23? - token ring 23?)
IS" 10612-9:1997
!nformation technology. !nternational standardi.ed profile #D. #elaying the 03& service using
transparent $ridging. Profile #D('.(C (token ring 23? - >DD! 23?)
IS" 10613-2:1997
!nformation technology. !nternational standardi.ed profile #3. #elaying the connectionless-
mode network service. 23? su$network-dependent% media independent re=uirements
IS" 10613-3:1997
!nformation technology. !nternational standardi.ed profile #3. #elaying the connectionless-
mode network service. &S03&D 23? su$network-dependent% media-dependent re=uirements
IS" 10613-4:1997
!nformation technology. !nternational standardi.ed profile #3. #elaying the connectionless-
mode network service. >DD! 23? su$network-dependent% media-dependent re=uirements
IS" 10613-5:1997
!nformation technology. !nternational standardi.ed profile #3. #elaying the connectionless-
mode network service. Definition of profile #3().()% relaying the connectionless-mode network
service $etween &S03&D 23? su$networks
IS" 10613-6:1997
!nformation technology. !nternational standardi.ed profile #3. #elaying the connectionless-
mode network service. Definition of profile #3().(C% relaying the connectionless-mode network
service $etween &S03&D 23? su$network and >DD! 23? su$networks
IS" 10613-8:1997
!nformation technology. !nternational standardi.ed profile #3. #elaying the connectionless-
mode network service. Definition of profile #3().))))% relaying the connectionless-mode
network service $etween &S03&D 23? su$networks and PSD?s using virtual calls over a
PS-? leased line permanent access
IS" 10613-9:1997
!nformation technology. !nternational standardi.ed profile #3. #elaying the connectionless-
mode network service. Definition of profile #3().))@)% relaying the connectionless-mode
network service $etween &S03&D 23? su$networks and PSD?s using virtual calls over a
digital data circuit&SD? leased line permanent access
ISO%IEC IS" 10615-3:1996
!nformation technology. !nternational standardi.ed profiles 3D!nn. "S! directory. 3D!@). DS3
performer role
ISO%IEC IS" 10615-4:1996
!nformation technology. !nternational standardi.ed profiles 3D!nn. "S! directory. 3D!@@. DS3
invoker role
ISO%IEC IS" 10616:1995
!nformation technology. !nternational standardi.ed profile >D!)). Directory data definitions.
&ommon directory use (?ormal)
ISO 10618:2000
&ar$on fi$re. Determination of tensile properties of resin-impregnated yarns
ISO 10627-2:1996
1ydraulic agricultural sprayers. Data sheets. -echnical specifications related to components
ISO 10628:2001
>low diagrams for process plants. General rules
ISO 10634:1996
;ater =uality. Guidance for the preparation and treatment of poorly water-solu$le organic
compounds for the su$se=uent evaluation of their $iodegrada$ility in an a=ueous medium
ISO 10635:1999
#efractory products. 0ethods of test for ceramic fi$re products.
ISO 10636:1994
Photography. Processing chemicals. Specification for anhydrous sodium thiosulfate and sodium
thiosulfate pentahydrate
ISO 10637:2000
Dental e=uipment. 1igh and medium volume suction systems
ISO%IEC 10641:1993
!nformation technology. &omputer graphics and image processing. &onformance testing of
implementations of graphics standards
ISO 10642:1998
1e/agon socket countersunk head screws
ISO 10644:1998
Screw and washer assem$lies with plain washers. ;asher hardness classes @AA 17 and 'AA 17
ISO 10651-4:2002
2ung ventilators. Particular re=uirements for operator-powered resuscitators
ISO 10653:1993
2ight-gauge metal containers. #ound open-top cans. &ans defined $y their nominal gross lidded
capacities
ISO 10654:1993
2ight gauge metal containers. #ound open-top cans. &ans for li=uid products with added gas%
defined $y their nominal filling volumes
ISO 10658:1996
!ndustrial trucks operating in special conditions of stacking with load laterally displaced $y
powered devices. 3dditional sta$ility test
ISO 10663:1999
1e/agon nuts with flange. >ine pitch thread
ISO 10664:1999
1e/alo$ular internal driving feature for $olts and screws
ISO 10666:1999
Drilling screws with tapping screw threads. 0echanical and functional properties
ISO 10669:1999
Plain washers for tapping screw and washer assem$lies. ?ormal and large series. Product grade
3
ISO 10673:1999
Plain washers for screw and washer assem$lies. Small% normal and large series. Product grade 3
ISO 10683:2000
>asteners. ?on-electrolytically applied .inc flake coatings
ISO 10692-1:2001
Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry. "utlet
connections
ISO 10692-2:2001
Gas cylinders. Gas cylinder valve connections for use in the microelectronics industry.
Specification and type testing for valve to cylinder connections
ISO 10695:2000
;ater =uality. Determination of selected organic nitrogen and phosphorus compounds. Gas
chromatographic methods
ISO 10700:1995
Steel and iron. Determination of manganese content. >lame atomic a$sorption spectrometric
method
ISO 10705-1:2001
;ater =uality. Detection and enumeration of $acteriophages. Detection and enumeration of
$acteriophages. <numeration of >-specific #?3 $acteriophages
ISO 10705-2:2001
;ater =uality. Detection and enumeration of $acteriophages. <numeration of somatic coliphages
ISO 10707:1998
;ater =uality. <valuation in an a=ueous medium of the KultimateK aero$ic $iodegrada$ility of
organic compounds. 0ethod $y analysis of $iochemical o/ygen demand (closed $ottle test)
ISO 10712:1996
;ater =uality. B:!Pseudomonas putidaB:# growth inhi$ition test (B:!PseudomonasB:# cell
multiplication inhi$ition test)
ISO 10713:1992
5ewellery. Gold alloy coatings
ISO 10714:2002
Steel and iron. Determination of phosphorus content. Phosphovanadomoly$date
spectrophotometric method
ISO 10715:2001
?atural gas. Sampling guidelines
ISO 10716:1994
Paper and $oard. Determination of alkali reserve
ISO 10718:2002
&ork stoppers. <numeration of colony-forming units of yeasts% moulds and $acteria capa$le of
growth in an alcoholic medium
DD E!+ ISO 10722-1:1998
Geote/tiles and geote/tile-related products. Procedure for simulating damage during installation.
!nstallation in granular materials
ISO 10723:2002
?atural gas. Performance evaluation for on-line analytical systems
ISO 10724-1:2001
Plastics. !n+ection moulding of test specimens of thermosetting powder moulding compounds
(P0&s). General principles and moulding of multipurpose test specimens
ISO 10724-2:2001
Plastics. !n+ection moulding of test specimens of thermosetting powder moulding compounds
(P0&s). Small plates
ISO 10725:2000
3cceptance sampling plans and procedures for the inspection of $ulk materials
ISO 10727:2002
-ea and instant tea in solid form. Determination of caffeine content. 0ethod using high-
performance li=uid chromatography
ISO%IEC 10728:1993
!nformation technology. !nformation #esource Dictionary System (!#DS) Services !nterface
ISO%IEC 10729-1:1993
!nformation technology. "pen Systems !nterconnection. &onformance test suite for the
presentation layer. -est suite structure and test purposes for the presentation protocol
ISO%IEC 10729-2:1995
!nformation technology. "pen Systems !nterconnection. &onformance test suite for the
presentation layer. -est suite structure and test purposes for the 3S?.) $asic encodings
ISO%IEC &' 10730:1993
!nformation technology. "pen systems interconnection. -utorial on naming and addressing
ISO%IEC 10731:1994
!nformation technology. "pen systems interconnection. Basic reference model. &onventions for
the definition of "S! services
ISO%IEC 10732:1993
!nformation technology. Dse of 8.@( packet layer protocol to provide the "S! connection-mode
network service over the telephone network
ISO%IEC 10733:1998
!nformation technology. <lements of management information related to the "S! network layer
ISO%IEC 10736:1995
!nformation technology. -elecommunications and information e/change $etween systems.
-ransport layer security protocol
ISO%IEC 10737:1998
!nformation technology. <lements of management information related to the "S! -ransport layer
ISO%IEC 10739-1:1994
!nformation technology. "pen Systems !nterconnection. -est suite structure and test purposes
ISO%IEC 10744:1997
!nformation technology. 1ypermediatime-$ased structuring language (1y-ime)
ISO%IEC 10745:1995
!nformation technology. "pen systems interconnection. Dpper layers security model
ISO%IEC 10746-1:1998
!nformation technology. "pen distri$uted processing. #eference model. "verview
ISO%IEC 10746-2:1996
!nformation technology. "pen distri$uted processing. #eference model. >oundations
ISO%IEC 10746-3:1996
!nformation technology. "pen distri$uted processing. #eference model. 3rchitecture
ISO 10754:1996
!nformation and documentation. </tension of the &yrillic alpha$et coded character set for non-
Slavic languages for $i$liographic information interchange
ISO 10756:1994
Graphic technology. Prepress digital data e/change. &olour line art data on magnetic tape
ISO 10758:1994
Graphic technology. Prepress digital data e/change. "nline transfer from electronic prepress
systems to colour hardcopy devices
ISO 10759:1994
Graphic technology. Prepress digital data e/change. 0onochrome image data on magnetic tape
ISO 10762:1997
1ydraulic fluid power. &ylinder mounting dimensions. )A 0Pa ()AA $ar) series
ISO 10766:1996
1ydraulic fluid power. &ylinders. 1ousing dimensions for rectangular-section-cut $earing rings
for pistons and rods
ISO 10767-1:1996
1ydraulic fluid power. Determination of pressure ripple levels generated in systems and
components. Precision method for pumps
ISO 10767-2:1999
1ydraulic fluid power. Determination of pressure ripple levels generated in systems and
components. Simplified method for pumps
ISO 10767-3:1999
1ydraulic fluid power. Determination of pressure ripple levels generated in systems and
components. 0ethod for motors
ISO 10770-1:1998
1ydraulic fluid power. <lectrically modulated hydraulic control valves. -est methods for four-
way directional flow control valves
ISO 10770-2:1998
1ydraulic fluid power. <lectrically modulated hydraulic control valves. -est methods for three-
way directional flow control valves
ISO 10771-1:2002
1ydraulic fluid power. >atigue pressure testing of metal pressure-containing envelopes. -est
method
ISO 10775:1995
Paper% $oard and pulps. Determination of cadmium content. 3tomic a$sorption spectrometric
method
ISO%IEC 10777:1991
!nformation technology. '%,) mm wide magnetic tape cartridge for information interchange.
1elical scan recording. DDS format
ISO 10790:1999
0easurement of fluid flow in closed conduits. Guidance to the selection% installation and use of
&oriolis meters (mass flow% density and volume flow measurements)
ISO 10791-1:1998
-est conditions for machining centres. Geometric tests for machines with hori.ontal spindle and
with accessory heads (hori.ontal 4-a/is)
ISO 10791-2:2001
-est conditions for machining centres. Geometric tests for machines with vertical spindle or
universal heads with vertical primary rotary a/is (vertical 4-a/is)
ISO 10791-3:1998
-est conditions for machining centres. Geometric tests for machines with integral inde/a$le or
continuous universal heads (vertical 4-a/is)
ISO 10791-4:1998
-est conditions for machining centres. 3ccuracy and repeata$ility of positioning of linear and
rotary a/es
ISO 10791-5:1998
-est conditions for machining centres. 3ccuracy and repeata$ility of positioning of work-holding
pallets
ISO 10791-6:1998
-est conditions for machining centres. 3ccuracy of feeds% speeds and interpolations
ISO 10791-7:1998
-est conditions for machining centres. 3ccuracy of a finished test piece
ISO 10791-8:2001
-est conditions for machining centres. <valuation of contouring performance in the three
coordinate planes
ISO 10791-9:2001
-est conditions for machining centres. <valuation of the operating times of tool change and
pallet change
ISO 10792-1:1995
3erospace. 3irframe spherical plain $earings in corrosion-resisting steel with self-lu$ricating
liner. 0etric series
ISO 10792-2:1995
3erospace. 3irframe spherical plain $earings in corrosion-resisting steel with self-lu$ricating
liner. !nch series
ISO 10792-3:1995
3erospace. 3irframe spherical plain $earings in corrosion-resisting steel with self-lu$ricating
liner. -echnical specification
ISO 10807:1997
Pipework. &orrugated fle/i$le metallic hose assem$lies for the protection of electrical ca$les in
e/plosive atmosphere
ISO 10814:1996
0echanical vi$ration. Suscepti$ility and sensitivity of machines to un$alance
ISO 10815:1996
0echanical vi$ration. 0easurement of vi$ration generated internally in railway tunnels $y the
passage of trains
ISO 10816-2:2001
0echanical vi$ration. <valuation of machine vi$ration $y measurements on non-rotating parts.
2and-$ased steam tur$ines and generators in e/cess of (A 0; with normal operating speeds of
)(AA rmin% ),AA rmin% 'AAA rmin and '*AA rmin
ISO 10816-5:2001
0echanical vi$ration. <valuation of machine vi$ration $y measurements on non-rotating parts.
0achine sets in hydraulic power and pumping plants
ISO 10817-1:1999
#otating shaft vi$ration measuring systems. #elative and a$solute sensing of radial vi$ration
ISO 10819:1997
0echanical vi$ration and shock. 1and-arm vi$ration. 0ethod for the measurement and
evaluation of the vi$ration transmissi$ility of gloves at the palm of the hand
ISO 10823:1996
Guidance on the selection of roller chain drives
ISO &' 10828:1997
;orm gears. Geometry of worm profiles
ISO 10834:1992
-e/tile floor coverings. ?on-destructive measurement of pile thickness a$ove the $acking.
;#"?4 gauge method
ISO 10836:1994
!ron ores. 0ethod of sampling and sample preparation for physical testing
ISO 10838-1:2000
0echanical fittings for polyethylene piping systems for the supply of gaseous fuels. 0etal
fittings for pipes of nominal outside diameter less than or e=ual to *'mm
ISO 10838-2:2000
0echanical fittings for polyethylene piping systems for the supply of gaseous fuels. 0etal
fittings for pipes of nominal outside diameter greater than *'mm
ISO 10838-3:2001
0echanical fittings for polyethylene piping systems for the supply of gaseous fuels.
-hermoplastic fittings for pipes of nominal outside diameter less than or e=ual to *'mm
ISO 10840:2003
Plastics. Guidance for the use of standard fire tests
ISO 10844:1994
3coustics. Specification of test tracks for the purpose of measuring noise emitted $y road
vehicles
ISO 10846-1:1999
3coustics and vi$ration. 2a$oratory measurement of vi$ro-acoustic transfer properties of
resilient elements. Principles and guidelines
ISO 10846-2:1999
3coustics and vi$ration. 2a$oratory measurement of vi$ro-acoustic transfer properties of
resilient elements. Dynamic stiffness of elastic supports for translatory motion. Direct method
ISO 10846-3:2002
3coustics and vi$ration. 2a$oratory measurement of vi$ro-acoustic transfer properties of
resilient elements. !ndirect method for determination of the dynamic stiffness of resilient
supports for translatory motion
ISO%IEC 10857:1994
!nformation technology. 0icroprocessor systems. >uture$usM. 2ogical protocol specification
ISO%IEC 10861:1994
!nformation technology. 0icroprocessor systems. 1igh-performance synchronous '@-$it $us6
0D2-!BDS !!
ISO 10882-1:2001
1ealth and safety in welding and allied processes. Sampling of air$orne particles and gases in the
operatorKs $reathing .one. Sampling of air$orne particles
ISO 10882-2:2000
1ealth and safety in welding and allied processes. Sampling of air$orne particles and gases in the
operatorKs $reathing .one. Sampling of gases
ISO 10884:1995
0anually porta$le $rush-cutters and grass trimmers with internal com$ustion engine.
Determination of sound power levels. <ngineering method (grade @)
ISO%IEC 10885:1993
!nformation technology. '(* mm optical disk cartridge for information interchange. ;rite once
ISO 10889-1:1997
-ool holders with cylindrical shank. &ylindrical shank% location $ore. -echnical delivery
conditions
ISO 10889-2:1997
-ool holders with cylindrical shank. -ype 3% shanks for tool holders of special designs
ISO 10889-3:1997
-ool holders with cylindrical shank. -ype B with rectangular radial seat
ISO 10889-4:1997
-ool holders with cylindrical shank. -ype & with rectangular a/ial seat
ISO 10889-5:1997
-ool holders with cylindrical shank. -ype D with more than one rectangular seat
ISO 10889-6:1997
-ool holders with cylindrical shank. -ype < with cylindrical seat
ISO 10889-7:1997
-ool holders with cylindrical shank. -ype > with taper seat
ISO 10889-8:1997
-ool holders with cylindrical shank. -ype 4% accessories
ISO 10897:1996
&ollets for tool holders with taper ratio )6)A. &ollets% holders% nuts
ISO 10914:1996
3ssem$ly tools for screws and nuts. Sockets and wrenches for spline drive
ISO%IEC 10918-1:1994
!nformation technology. Digital compression and coding of continuous-tone still images.
#e=uirements and guidelines
ISO%IEC 10918-2:1995
!nformation technology. Digital compression and coding of continuous-tone still images.
&ompliance testing
ISO%IEC 10918-4:1999
!nformation technology. Digital compression and coding of continuous-tone still images.
#egistration of 5P<G profiles% SP!>> profiles% SP!>> tags% SP!>> colour spaces% 3PPn markers%
SP!>> compression types% and #egistration 3uthorities (#<G3D-)
ISO 10931-1:1997
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). General
ISO 10931-2:1997
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). Pipes
ISO 10931-3:1996
Plastics piping systems for industrial applications. Poly (vinylidene fluoride). >ittings
ISO 10934-1:2002
"ptics and optical instruments. 7oca$ulary for microscopy. 2ight microscopy
ISO 10936-1:2000
"ptics and optical instruments. "peration microscopes. #e=uirements and test methods
ISO 10936-2:2001
"ptics and optical instruments. "peration microscopes. 2ight ha.ard from operation microscopes
used in ocular surgery
ISO 10938:1998
"phthalmic instruments. &hart pro+ectors
ISO 10939:1998
"phthalmic instruments. Slit-lamp microscopes
ISO 10940:1998
"phthalmic instruments. >undus cameras
ISO 10942:1998
"phthalmic instruments. Direct ophthalmoscopes
ISO 10943:1998
"phthalmic instruments. !ndirect ophthalmoscopes
ISO 10944:1998
"phthalmic optics. Synoptophores
ISO 10945:1994
1ydraulic fluid power. Gas-loaded accumulators. Dimensions of gas ports
ISO 10946:1999
1ydraulic fluid power. Gas-loaded accumulators with separator. Selection of preferred hydraulic
ports
ISO 10955:1999
<nd-fittings and turn$arrels for aircraft control wire rope. -echnical specification
ISO 10959:2000
3erospace. 05 threads. Gauging
ISO 10960:1997
#u$$er and plastic hoses. 3ssessment of o.one resistance under dynamic conditions
ISO 10962:2001
Securities and related financial instruments. &lassification of >inancial !nstruments (&>! code)
ISO 10964:1997
3dhesives. Determination of tor=ue strength of anaero$ic adhesives on threaded fasteners
ISO 10965:1998
-e/tile floor coverings. Determination of electrical resistance
ISO%IEC 10967-1:1994
!nformation technology. 2anguage independent arithmetic. !nteger and floating point arithmetic
ISO%IEC 10967-2:2001
!nformation technology. 2anguage independent arithmetic. <lementary numerical functions
ISO 10972-1:1998
&ranes. #e=uirements for mechanisms. General
ISO 10993-1:1998
Biological evaluation of medical devices. <valuation and testing
ISO 10993-2:1998
Biological evaluation of medical devices. 3nimal welfare re=uirements
ISO 10993-4:2002
Biological evaluation of medical devices. Selection of tests for interactions with $lood
ISO 10993-5:1999
Biological evaluation of medical devices. -ests for in vitro cytoto/icity
ISO 10993-7:1996
Biological evaluation of medical devices. <thylene o/ide sterili.ation residuals
ISO 10993-8:2001
Biological evaluation of medical devices. Selection and =ualification of reference materials for
$iological tests
ISO 10993-9:1999
Biological evaluation of medical devices. >ramework for identification and =uantification of
potential degradation products
ISO 10993-10:2002
Biological evaluation of medical devices. -ests for irritation and delayed-type hypersensitivity
ISO 10993-11:1996
Biological evaluation of medical devices. -ests for systemic to/icity
ISO 10993-12:1997
Biological evaluation of medical devices. Sample preparation and reference materials
ISO 10993-13:1999
Biological evaluation of medical devices. !dentification and =uantification of degradation
products from polymeric medical devices
ISO 10993-14:2001
Biological evaluation of medical devices. !dentification and =uantification of degradation
products from ceramics
ISO 10993-15:2001
Biological evaluation of medical devices. !dentification and =uantification of degradation
products from metals and alloys
ISO 10993-16:1997
Biological evaluation of medical devices. -o/icokinetic study design for degradation products
and leacha$les
ISO 10993-17:2002
Biological evaluation of medical devices. <sta$lishment of allowa$le limits for leacha$le
su$stances
ISO%IEC 10994:1992
!nformation technology. Data interchange on EA mm fle/i$le disk cartridges using modified
fre=uency modulation recording at ') ,') ftprad on ,A tracks on each side. !S" -ype 'A'
ISO 10998:1995
3gricultural wheeled tractors. Steering re=uirements
ISO 11003-1:2001
3dhesives. Determination of shear $ehaviour of structural adhesives. -orsion test method using
$utt-$onded hollow cylinders
ISO 11003-2:2001
3dhesives. Determination of shear $ehaviour of structural adhesives. -ensile test method using
thick adherends
ISO 11021:1999
<ssential oils. Determination of water content. Garl >ischer method
ISO 11023:1999
2i=uorice e/tracts (Glycyrrhi.a gla$ra 2.). Determination of glycyrrhi.ic acid content. 0ethods
using high-performance li=uid chromatography
ISO 11041:1996
;orkplace air. Determination of particulate arsenic and arsenic compounds and arsenic trio/ide
vapour. 0ethod $y hydride generation and atomic a$sorption spectrometry
ISO 11042-1:1996
Gas tur$ines. </haust gas emission. 0easurement and evaluation
ISO 11042-2:1996
Gas tur$ines. </haust gas emission. 3utomated emission monitoring
ISO 11056:1999
Sensory analysis. 0ethodology. 0agnitude estimation method
ISO 11058:1999
Geote/tiles and geote/tile-related products. Determination of water permea$ility characteristics
normal to the plane% without load
ISO 11064-1:2001
<rgonomic design of control centres. Principles for the design of control centres
ISO 11064-2:2001
<rgonomic design of control centres. Principles for the arrangement of control suites
ISO 11064-3:2000
<rgonomic design of control centres. &ontrol room layout
ISO 11070:1999
Sterile% single-use intravascular catheter introducers
ISO%IEC 11072:1993
!nformation -echnology. &omputer graphics. &omputer Graphics #eference 0odel
ISO 11076:2000
3erospace. 3ircraft de-icinganti-icing methods with fluids
DD E!+ ISO 11079:1999
<valuation of cold environments. Determination of re=uired clothing insulation (!#<9)
ISO 11086:1996
Gas tur$ines. 7oca$ulary
ISO 11088:1993
3ssem$ly% ad+ustment and inspection of an alpine ski-$inding-$oot (S-B-B) system
ISO 11090-1:1998
0achine tools. -est conditions for die sinking electrodischarge machines (<D0). -erminology
and testing of accuracy. Single column machines (cross slide ta$le type and fi/ed ta$le type)
ISO 11090-2:1998
0achine tools. -est conditions for die sinking electrodischarge machines (<D0). -erminology
and testing of accuracy. -wo column machines (slide-head type and cross-slide ta$le type)
ISO 11091:1999
&onstruction drawings. 2andscape drawing practice
ISO 11093-1:1994
Paper and $oard. -esting of cores. Sampling
ISO 11093-2:1994
Paper and $oard. -esting of cores. &o-ordinating of test samples
ISO 11093-3:1994
Paper and $oard. -esting of cores. Determination of moisture content using the oven drying
method
ISO 11093-4:1997
Paper and $oard. -esting of cores. 0easurement of dimensions
ISO 11093-5:1994
Paper and $oard. -esting of cores. Determination of characteristics of concentric rotation
ISO 11093-6:1996
Paper and $oard. -esting of cores. Determination of $ending strength $y the three-point method
ISO 11093-7:1997
Paper and $oard. -esting of cores. Determination of fle/ural modulus $y the three-point method
ISO 11093-8:1997
Paper and $oard. -esting of cores. Determination of natural fre=uency and fle/ural modulus $y
e/perimental modal analysis
ISO 11093-9:1994
Paper and $oard. -esting of cores. Determination of flat crush resistance
ISO 11095:1996
2inear cali$ration using reference materials
ISO 11096:2002
#oad vehicles. Pedestrian protection. !mpact test method for pedestrian thigh% leg and knee
ISO 11102-1:1997
#eciprocating internal com$ustion engines. 1andle starting e=uipment. Safety re=uirements and
tests
ISO 11102-2:1997
#eciprocating internal com$ustion engines. 1andle starting e=uipment. 0ethod of testing the
angle of disengagement
ISO 11105:1997
Small craft. 7entilation of petrol engine andor petrol tank compartments
ISO 11108:1996
!nformation and documentation. 3rchival paper. #e=uirements for permanence and dura$ility
ISO 11111:1996
Safety re=uirements for te/tile machinery
ISO 11114-1:1998
-ransporta$le gas cylinders. &ompati$ility of cylinder and valve materials with gas contents.
0etallic materials
ISO 11114-2:2001
-ransporta$le gas cylinders. &ompati$ility of cylinder and valve materials with gas contents.
?on-metallic materials
ISO 11114-3:1998
-ransporta$le gas cylinders. &ompati$ility of cylinder and valve materials with gas contents.
3utogenous ignition test in o/ygen atmosphere
ISO 11116-1:1999
Gas cylinders. ):< taper thread for connection of valves to gas cylinders. Specifications
ISO 11116-2:1999
Gas cylinders. ):< taper thread for connection of valves to gas cylinders. !nspection gauges
ISO 11120:1999
Gas cylinders. #efilla$le seamless steel tu$es for compressed gas transport% of water capacity
$etween )(Al and 'AAAl. Design% construction and testing
ISO 11124-1:1997
Preparation of steel su$strates $efore application of paints and related products. Specifications
for metallic $last-cleaning a$rasives. General introduction and classification
ISO 11124-2:1997
Preparation of steel su$strates $efore application of paints and related products. Specifications
for metallic $last-cleaning a$rasives. &hilled-iron grit
ISO 11124-3:1997
Preparation of steel su$strates $efore application of paints and related products. Specifications
for metallic $last-cleaning a$rasives. 1igh-car$on cast-steel shot and grit
ISO 11124-4:1997
Preparation of steel su$strates $efore application of paints and related products. Specifications
for metallic $last-cleaning a$rasives. 2ow-car$on cast-steel shot
ISO 11125-1:1997
Preparation of steel su$strates $efore application of paints and related products. -est methods for
metallic $last-cleaning a$rasives. Sampling
ISO 11125-2:1997
Preparation of steel su$strates $efore application of paints and related products. -est methods for
metallic $last-cleaning a$rasives. Determination of particle si.e distri$ution
ISO 11125-3:1997
Preparation of steel su$strates $efore application of paints and related products. -est methods for
metallic $last-cleaning a$rasives. Determination of hardness
ISO 11125-4:1997
Preparation of steel su$strates $efore application of paints and related products. -est methods for
metallic $last-cleaning a$rasives. Determination of apparent density
ISO 11125-5:1997
Preparation of steel su$strates $efore application of paints and related products. -est methods for
metallic $last-cleaning a$rasives. Determination of percentage defective particles and of
microstructure
ISO 11125-6:1997
Preparation of steel su$strates $efore application of paints and related products. -est methods for
metallic $last-cleaning a$rasives. Determination of foreign matter
ISO 11125-7:1997
Preparation of steel su$strates $efore application of paints and related products. -est methods for
metallic $last-cleaning a$rasives. Determination of moisture
ISO 11126-1:1997
Preparation of steel su$strates $efore application of paints and related products. Specifications
for non-metallic $last-cleaning a$rasives. General introduction and classification
ISO 11126-3:1998
Preparation of steel su$strates $efore application of paints and related products. Specifications
for non-metallic $last-cleaning a$rasives. &opper refinery slag
ISO 11126-4:1998
Preparation of steel su$strates $efore application of paints and related products. Specifications
for non-metallic $last-cleaning a$rasives. &oal furnace slag
ISO 11126-5:1998
Preparation of steel su$strates $efore application of paints and related products. Specifications
for non-metallic $last-cleaning a$rasives. ?ickel refinery slag
ISO 11126-6:1998
Preparation of steel su$strates $efore application of paints and related products. Specifications
for non-metallic $last-cleaning a$rasives. !ron furnace slag
ISO 11126-7:2001
Preparation of steel su$strates $efore application of paints and related products. Specifications
for non-metallic $last-cleaning a$rasives. Specification for fused aluminium o/ide
ISO 11126-8:1998
Preparation of steel su$strates $efore application of paints and related products. Specifications
for non-metallic $last-cleaning a$rasives. "livine sand
ISO 11127-1:1998
Preparation of steel su$strates $efore application of paints and related products. -est methods for
non-metallic $last-cleaning a$rasives. Sampling
ISO 11127-2:1998
Preparation of steel su$strates $efore application of paints and related products. -est methods for
non-metallic $last-cleaning a$rasives. Determination of particle si.e distri$ution
ISO 11127-3:1998
Preparation of steel su$strates $efore application of paints and related products. -est methods for
non-metallic $last-cleaning a$rasives. Determination of apparent density
ISO 11127-4:1998
Preparation of steel su$strates $efore application of paints and related products. -est methods for
non-metallic $last-cleaning a$rasives. 3ssessment of hardness $y a glass slide test
ISO 11127-5:1998
Preparation of steel su$strates $efore application of paints and related products. -est methods for
non-metallic $last-cleaning a$rasives. Determination of moisture
ISO 11127-6:1998
Preparation of steel su$strates $efore application of paints and related products. -est methods for
non-metallic $last-cleaning a$rasives. Determination of water-solu$le contaminants $y
conductivity measurement
ISO 11127-7:1998
Preparation of steel su$strates $efore application of paints and related products. -est methods for
non-metallic $last-cleaning a$rasives. Determination of water-solu$le chlorides
ISO 11130:1999
&orrosion of metals and alloys. 3lternate immersion test in salt solution
DD E!+ ISO 11133-1:2000
0icro$iology of food and animal feeding stuffs. Guidelines on =uality assurance and
performance testing of culture media. General guidelines on =uality assurance of culture media
in the la$oratory
ISO 11143:2000
Dental e=uipment. 3malgam separators
ISO 11144:1997
Dental e=uipment. &onnections for supply and waste lines
ISO 11145:2001
"ptics and optical instruments. 2asers and laser-related e=uipment. 7oca$ulary and sym$ols
ISO 11146:2000
2aser and laser-related e=uipment. -est methods for laser $eam parameters. Beam width%
divergence angle and $eam
ISO 11149:1997
"ptics and optical instruments. 2asers and laser related e=uipment. >i$re optic connectors for
non-telecommunication laser applications
ISO 11151-1:2000
2asers and laser-related e=uipment. Standard optical components. &omponents for the D7%
visi$le and near-infrared spectral ranges
ISO 11151-2:2000
2asers and laser-related e=uipment. Standard optical components. &omponents for the infrared
spectral range
DD ISO%&S 11155-2:2002
#oad vehicles. 3ir filters for passenger compartments. -est for gaseous filtration
ISO 11157:1999
#oad vehicles. Brake lining assem$lies. !nertia dynamometer test method
ISO 11158:1997
2u$ricants% industrial oils and related products (class 2). >amily 1 (hydraulic systems).
Specifications for categories 11% 12% 10% 1#% 17 and 1G
ISO 11168:1995
Socket wrenches for spark and glow plugs
ISO 11170:1995
1ydraulic fluid power. >ilter elements. Procedure for verifying performance characteristics
ISO 11171:1999
1ydraulic fluid power. &ali$ration of automatic particle counters for li=uids
ISO%IEC 11172-1:1995
!nformation technology. &oding of moving pictures and associated audio for digital storage
media at up to a$out )%( 0$its. Systems
ISO%IEC 11172-2:1995
!nformation technology. &oding of moving pictures and associated audio for digital storage
media at up to a$out )%( 0$its. 7ideo
ISO%IEC 11172-3:1995
!nformation technology. &oding of moving pictures and associated audio for digital storage
media at up to a$out )%( 0$its. 3udio
ISO%IEC 11172-4:1997
!nformation technology. &oding of moving pictures and associated audio for digital storage
media at up to a$out )%( 0$its. &ompliance testing
ISO 11174:1996
;orkplace air. Determination of particulate cadmium and cadmium compounds. >lame and
electro-thermal atomic a$sorption spectrometric method
ISO%IEC 11179-1:2004
!nformation -echnology - 0etadata registries (0D#) - Part )6 >ramework
ISO%IEC 11179-2:2005
!nformation technology - 0etadata registries (0D#) - Part @6 &lassification
ISO%IEC 11179-3:2003
!nformation technology - 0etadata registries (0D#) - Part '6 #egistry metamodel and $asic
attri$utes
ISO%IEC 11179-4:2004
!nformation technology - 0etadata registries (0D#) - Part C6 >ormulation of data definitions
ISO%IEC 11179-5:2005
!nformation technology - 0etadata registries (0D#) - Part (6 ?aming and identification
principles
ISO%IEC 11179-6:2005
!nformation technology - 0etadata registries (0D#) - Part *6 #egistration
IS" 11181-1:1995
!nformation technology. !nternational standardi.ed profile >"D@*. "pen document format6
<nhanced document structure. &haracter% raster graphics and geometric graphics content
architectures. Document 3pplication Profile (D3P)
IS" 11182-1:1995
!nformation technology. !nternational standardi.ed profile >"D'*. "pen document format6
</tended document structure. &haracter% raster graphics and geometric graphics content
architectures. Document 3pplication Profile (D3P)
IS" 11183-1:1995
!nformation technology. !nternational standardi.ed profiles 3"0)n "S! management.
0anagement communications. Specification of 3&S<% presentation and session protocols for the
use $y #"S< and &0!S<
IS" 11183-2:1995
!nformation technology. !nternational standardi.ed profiles 3"0)n "S! management.
0anagement communications. &0!S<#"S< for 3"0)@. <nhanced management
communications
IS" 11183-3:1995
!nformation technology. !nternational standardi.ed profiles 3"0)n "S! management.
0anagement communications. &0!S<#"S< for 3"0)). Basic management communications
ISO%IEC IS" 11184-1:1995
!nformation technology. !nternational Standardi.ed Profiles >7-)nn. 7irtual -erminal Basic
&lass. #egister of 7-<- profiles. >7-)@)% >7-)@@. S-mode forms and paged 7-<-profiles
ISO%IEC IS" 11184-2:1996
!nformation technology. !nternational Standardi.ed Profiles >7-)nn. 7irtual -erminal Basic
&lass. #egister of 7-<- profiles. >7-))(. 3-mode Generali.ed -elnet 7-<-profile
ISO%IEC IS" 11184-3:1996
!nformation technology. !nternational Standardi.ed Profiles >7-)nn. 7irtual -erminal Basic
&lass. #egister of 7-<- profiles. >7-))C. 3-mode transparent 7-<-profile
IS" 11185-1:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@))% >7-@)@. Se=uenced and unse=uenced
application control o$+ects
IS" 11185-2:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@)'% >7-@)C. Se=uenced and unse=uenced
terminal control o$+ects
IS" 11185-3:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@)(% >7-@)*. 3pplication #!" record loading
control o$+ect% terminal% #!" record notification control o$+ect
IS" 11185-4:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@):. 1ori.ontal -a$ulation &ontrol "$+ect
IS" 11185-5:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@),. 2ogical image control o$+ect
IS" 11185-6:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@)E. Status message control o$+ect
IS" 11185-7:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@))A. <ntry-&ontrol &ontrol "$+ect
IS" 11185-8:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@@). >orms ><!&" (>ield <ntry !nstruction
&ontrol "$+ect) ?o.)
IS" 11185-9:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@@@. Paged ><!&" (>ield <ntry !nstruction
&ontrol "$+ect) ?o. )
IS" 11185-10:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@'). >orms ><P&" (>ield <ntry Pilot &ontrol
"$+ect) ?o.)
IS" 11185-11:1996
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@'@. Paged ><P&" (>ield <ntry Pilot &ontrol
"$+ect) ?o. )
ISO%IEC IS" 11185-12:1995
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@))*. Generali.ed -elnet Synch &ontrol "$+ectL
>7-@)):. Generali.ed -elnet Signal &ontrol "$+ectL >7-@)),. Generali.ed -elnet ?egotiation
&ontrol "$+ectL >7-@))E. Generali.ed -elnet Su$negotiation &ontrol "$+ect
ISO%IEC IS" 11185-13:1995
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@))). ;aiting time control o$+ect
ISO%IEC IS" 11185-14:1995
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@))@. Printer control o$+ect
ISO%IEC IS" 11185-15:1995
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@))'. >ield definition management control o$+ect
ISO%IEC IS" 11185-16:1995
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@))C. -erminal signal titles control o$+ect
ISO%IEC IS" 11185-17:1995
!nformation technology. !nternational standardi.ed profiles >7-@nn. 7irtual terminal $asic class.
#egister of control o$+ect type definitions. >7-@))(. 1elp te/t control o$+ect
ISO%IEC 11186-2:1996
!nformation technology. !nternational standardi.ed profiles >7-'nn. 7irtual terminal $asic class.
#egister of attri$ute assignment type definitions. >7-')). #epertoire 3ssignment -ype for
!S"!<& )A*C*
ISO%IEC IS" 11186-4:1997
!nformation technology. !nternational standardi.ed profiles >7-'nn. 7irtual terminal $asic class.
#egister of attri$ute assignment type definitions. >7-'@@. >ont 3ssignment -ype ?o. @
IS" 11188-1:1997
!nformation technology. !nternational standardi.ed profiles. &ommon upper layer re=uirements.
Basic connection oriented re=uirements
ISO%IEC IS" 11188-2:1996
!nformation technology. !nternational standardi.ed profiles. &ommon upper layer re=uirements.
Basic connection oriented re=uirements for #"S<-$ased profiles
ISO%IEC IS" 11189:1997
!nformation technology. !nternational standardi.ed profile >D)@. Directory data definitions.
01S use of the directory
IS" 11190:1996
!nformation technology. !nternational standardi.ed profile >D)'. Directory data definitions.
>-30 use of the directory
ISO 11195:1995
Gas mi/ers for medical use. Stand-alone gas mi/ers
ISO 11196:1997
3naesthetic gas monitors
ISO 11199-1:1999
;alking aids manipulated $y $oth arms. #e=uirements and test methods. ;alking frames
ISO 11199-2:1999
;alking aids manipulated $y $oth arms. #e=uirements and test methods. #ollators
ISO 11200:1996
3coustics. ?oise emitted $y machinery and e=uipment. Guidelines for the use of $asic standards
for the determination of emission sound pressure levels at a work station and at other specified
positions
ISO 11201:1996
3coustics. ?oise emitted $y machinery and e=uipment. 0easurement of emission sound pressure
levels at a work station and at other specified positions. <ngineering method in an essentially
free field over a reflecting plane
ISO 11202:1996
3coustics. ?oise emitted $y machinery and e=uipment. 0easurement of emission sound pressure
levels at a work station and at other specified positions. Survey method in situ
ISO 11203:1996
3coustics. ?oise emitted $y machinery and e=uipment. Determination of emission sound
pressure levels at a work station and at other specified positions from the sound power level
ISO 11204:1996
3coustics. ?oise emitted $y machinery and e=uipment. 0easurement of emission sound pressure
levels at a work station and at other specified positions. 0ethod re=uiring environmental
corrections
ISO 11210:1995
Determination of platinum in platinum +ewellery alloys. Gravimetric method after precipitation
of diammonium he/achloroplatinate
ISO 11212-1:1997
Starch and derived products. 1eavy metals content. Determination of arsenic content $y atomic
a$sorption spectrometry
ISO 11212-2:1997
Starch and derived products. 1eavy metals content. Determination of mercury content $y atomic
a$sorption spectrometry
ISO 11212-3:1997
Starch and derived products. 1eavy metals content. Determination of lead content $y atomic
a$sorption spectrometry with electrothermal atomi.ation
ISO 11212-4:1997
Starch and derived products. 1eavy metals content. Determination of cadmium content $y
atomic a$sorption spectrometry with electrothermal atomi.ation
ISO 11213:1995
0odified starch. Determination of acetyl content. <n.ymatic method
ISO 11214:1996
0odified starch. Determination of car$o/yl group content of o/idi.ed starch
ISO 11215:1998
0odified starch. Determination of adipic acid content of acetylated di-starch adipates. Gas-
chromatographic method
ISO 11216:1998
0odified starch. Determination of content of car$o/ymethyl groups in car$o/ymethyl starch
ISO 11224:2003
-e/tiles. ;e$ formation and $onding in nonwovens. 7oca$ulary
ISO 11235:1999
#u$$er compounding ingredients. Sulfenamide accelerators. -est methods
ISO 11243:1994
&ycles. 2uggage carriers for $icycles. &oncepts% classification and testing
ISO 11244:2000
Dental $ra.ing investments
ISO 11245:2000
Dental restorations. Phosphate-$onded refractory die materials
ISO 11246:2000
Dental ethyl silicate $onded casting investments
ISO 11248:2000
Plastics. -hermosetting moulding materials. <valuation of short-term performance at elevated
temperatures
ISO 11254-1:2000
2asers and laser-related e=uipment. Determination of laser-induced damage threshold of optical
surfaces. )-on-) test
ISO 11254-2:2001
2asers and laser-related e=uipment. Determination of laser-induced damage threshold of optical
surfaces. S-on-) test
ISO &' 11255:1994
3pplica$ility of hard cutting materials for machining $y chip removal. !nformation additional to
!S" ()' designation
ISO 11271:2002
Soil =uality. Determination of redo/ potential. >ield method
ISO 11290-1:1997
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the detection and
enumeration of B:!2isteria monocytogenesB:#. Detection method
ISO 11290-2:1998
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the detection and
enumeration of B:!2isteria monocytogenesB:#. <numeration method
ISO 11303:2002
&orrosion of metals and alloys. Guidelines for selection of protection methods against
atmospheric corrosion
ISO 11306:1998
&orrosion of metals and alloys. Guidelines for e/posing and evaluating metals and alloys in
surface sea water
ISO 11312:2000
Photography. Sheets of sensiti.ed material for the pre-press industry. Dimensions and related
re=uirements
ISO 11314:1995
Photography. Pro+ectors. !mage si.epro+ection distance calculations
ISO 11315-3:1999
Photography. Pro+ection in indoor rooms. &lassification of transmitting pro+ection screens and
measurement of their transmitted luminance levels
ISO 11316:1999
Photography. Pro+ection of still pictures. 0easuring methods for the evaluation of imaging
properties
ISO 11318:2002
&ardiac defi$rillators. &onnector assem$ly D>-) for implanta$le defi$rillators. Dimensions and
test re=uirements
ISO%IEC 11319:1993
!nformation technology. , mm wide magnetic tape cartridge for information interchange. 1elical
scan recording
ISO%IEC 11321:1992
!nformation technology. '%,) mm wide magnetic tape cartridge for information interchange.
1elical scan recording. D3-3D3- format
ISO 11323:2002
!ron ore and direct reduced iron. 7oca$ulary
ISO 11334-1:1997
;alking aids manipulated $y one arm. #e=uirements and test methods. <l$ow crutches
ISO 11334-4:1999
;alking aids manipulated $y one arm. #e=uirements and test methods. ;alking sticks with
three or more legs
ISO 11338-1:2003
Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic
hydrocar$ons. Sampling
ISO 11341:1998
Paints and varnishes. 3rtificial weathering and e/posure to artificial radiation. </posure to
filtered /enon-arc radiation
ISO 11342:1998
0echanical vi$ration. 0ethods and criteria for the mechanical $alancing of fle/i$le rotors
ISO 11345:1997
#u$$er. 3ssessment of car$on $lack dispersion. #apid comparative methods
ISO 11348-1:1999
;ater =uality. Determination of the inhi$itory effect of water samples on the light emission of
7i$rio fischeri (2uminescent $acteria test). 0ethod using freshly prepared $acteria
ISO 11348-2:1999
;ater =uality. Determination of the inhi$itory effect of water samples on the light emission of
7i$rio fischeri (2uminescent $acteria test). 0ethod using li=uid-dried $acteria
ISO 11348-3:1999
;ater =uality. Determination of the inhi$itory effect of water samples on the light emission of
7i$rio fischeri (2uminescent $acteria test). 0ethod using free.e-dried $acteria
ISO 11357-1:1997
Plastics. Differential scanning calorimetry (DS&). General principles
ISO 11357-2:1999
Plastics. Differential scanning calorimetry (DS&). Determination of glass transition temperature
ISO 11357-3:1999
Plastics. Differential scanning calorimetry (DS&). Determination of temperature and enthalpy of
melting and crystalli.ation
ISO 11357-5:1999
Plastics. Differential scanning calorimetry (DS&). Determination of characteristic reaction-curve
temperatures and times% enthalphy of reaction and degree of conversion
ISO 11357-6:2002
Plastics. Differential scanning calorimetry (DS&). Determination of o/idation induction time
ISO 11357-7:2002
Plastics. Differential scanning calorimetry (DS&). Determination of crystalli.ation kinetics
ISO 11358:1997
Plastics. -hermogravimetry (-G) of polymers. General principles
ISO 11359-1:1999
Plastics. -hermomechanical analysis (-03). General principles
ISO 11359-2:1999
Plastics. -hermomechanical analysis (-03). Determination of coefficient of linear thermal
e/pansion and glass transition temperature
ISO 11359-3:2002
Plastics. -hermomechanical analysis (-03). Determination of penetration temperature
ISO 11369:1997
;ater =uality. Determination of selected plant treatment agents. 0ethod using high performance
li=uid chromatography with D7 detection after solid-li=uid e/traction
ISO 11376:2001
Plastics. <po/y resins and glycidyl esters. Determination of inorganic chlorine
ISO 11377:1998
-e/tile floor coverings. >loor soiling. -est site set-up and soiling evaluation
ISO 11378-1:2000
-e/tile floor coverings. 2a$oratory soiling tests. Gappasoil test
ISO 11378-2:2001
-e/tile floor coverings. 2a$oratory soiling tests. Drum test
ISO 11379:1997
-e/tile floor coverings. 2a$oratory cleaning procedure using spray e/traction
ISO 11380:1997
"ptics and optical instruments. "phthalmic optics. >ormers
ISO 11381:1997
"ptics and optical instruments. "phthalmic optics. Screw threads
ISO 11399:2001
<rgonomics of the thermal environment. Principles and application of relevant !nternational
standards
ISO 11401:1998
Plastics. Phenolic resins. Separation $y li=uid chromatography
ISO 11402:1998
Plastics. &ondensation resins. Determination of free formaldehyde
ISO 11403-1:2003
Plastics. 3c=uisition and presentation of compara$le multipoint data. 0echanical properties
ISO 11403-2:2000
Plastics. 3c=uisition and presentation of compara$le multipoint data. -hermal and processing
properties
ISO 11403-3:2001
Plastics. 3c=uisition and presentation of compara$le multipoint data. <nvironmental influences
on properties
ISO%IEC 11404:1996
!nformation technology. Programming languages% their environments and system software
interfaces. 2anguage-independent datatypes
ISO 11408:1999
&hemical conversion coatings. Black o/ide coating on iron and steel. Specification and test
methods
ISO 11409:1998
Plastics. Phenolic resins. Determination of heats and temperatures of reaction $y differential
scanning calorimetry
ISO%IEC 11411:1995
!nformation technology. #epresentation for human communication of state transition of software
ISO 11415:1997
-ools for pressing. Die sets
ISO 11416:1995
-ennis rackets. #acket components and physical parameters
ISO 11421:1997
"ptics and optical instruments. 3ccuracy of optical transfer function ("->) measurement
ISO 11424:1996
#u$$er hoses and tu$ing for air and vacuum systems for internal-com$ustion engines.
Specification
ISO 11425:1996
#u$$er hoses and hose assem$lies for automo$ile power-steering systems. Specification
ISO 11426:1999
Determination of gold in gold +ewellery alloys. &upellation method (fire assay)
ISO 11431:2002
Building construction. 5ointing products. Determination of adhesioncohesion properties of
sealants after e/posure to heat% water and artificial light through glass
ISO 11432:1998
Building construction. Sealants. Determination of resistance to compression
ISO 11438-1:1993
>erronickel. Determination of trace-element content $y electrothermal atomic a$sorption
spectrometric method. General re=uirements and sample dissolution
ISO 11438-2:1993
>erronickel. Determination of trace-element content $y electrothermal atomic a$sorption
spectrometric method. Determination of lead content
ISO 11438-3:1993
>erronickel. Determination of trace-element content $y electrothermal atomic a$sorption
spectrometric method. Determination of antimony content
ISO 11438-4:1993
>erronickel. Determination of trace-element content $y electrothermal atomic a$sorption
spectrometric method. Determination of tin content
ISO 11438-5:1993
>erronickel. Determination of trace-element content $y electrothermal atomic a$sorption
spectrometric method. Determination of tellurium content
ISO 11438-6:1993
>erronickel. Determination of trace-element content $y electrothermal atomic a$sorption
spectrometric method. Determination of thallium content
ISO 11438-7:1993
>erronickel. Determination of trace-element content $y electrothermal atomic a$sorption
spectrometric method. Determination of silver content
ISO 11438-8:1993
>erronickel. Determination of trace-element content $y electrothermal atomic a$sorption
spectrometric method. Determination of indium content
ISO 11439:2000
Gas cylinders. 1igh pressure cylinders for the on-$oard storage of natural gas as a fuel for
automotive vehicles
ISO 11442-1:1996
-echnical product documentation. 1andling of computer-$ased technical information. Security
re=uirements
ISO 11442-2:1996
-echnical product documentation. 1andling of computer-$ased technical information. "riginal
documentation
ISO 11442-3:1996
-echnical product documentation. 1andling of computer-$ased technical information. Phases in
the product design process
ISO 11442-4:1996
-echnical product documentation. 1andling of computer-$ased technical information. Document
management and retrieval systems
ISO 11442-5:1999
-echnical product documentation. 1andling of computer-$ased technical information.
Documentation in the conceptual design stage of the development phase
ISO &' 11444:1995
9uality of sawn wood used for the construction of pallets
ISO 11446:2002
Passenger cars and light commercial vehicles with )@ 7 systems. )'-pole connectors $etween
towing vehicles and trailers. Dimensions and contact allocation
ISO 11450:1999
<=uipment for harvesting and conservation. #ound $alers. -erminology and commercial
specifications
ISO 11455:1995
#aw optical glass. Determination of $irefringence
ISO 11461:2001
Soil =uality. Determination of soil water content as a volume fraction using coring sleeves.
Gravimetric method
ISO 11462-1:2001
Guidelines for implementation of statistical process control (SP&). <lements of SP&
ISO 11463:1995
&orrosion of metals and alloys. <valuation of pitting corrosion
ISO 11468:2000
Plastics. Preparation of P7& pastes for test purposes. Dissolver method
ISO 11469:2000
Plastics. Generic identification and marking of plastics products
ISO 11475:1999
Paper and $oard. &!< whiteness% D*()A degrees (outdoor daylight)
ISO 11476:2000
Paper and $oard. Determination of &!< whiteness% &@BAD (indoor illumination conditions)
ISO 11480:1997
Pulp% paper and $oard. Determination of total chlorine and organically $ound chlorine
ISO 11489:1995
Determination of platinum in platinum +ewellery alloys. Gravimetric method after reduction with
mercury(!) chloride
ISO 11490:1995
Determination of palladium in palladium +ewellery alloys. Gravimetric method with dimethyl
glyo/ime
ISO 11498:2000
Dental handpieces. Dental low-voltage electric motors
ISO 11499:1999
Dental cartridges for local anaesthetics
ISO 11500:1997
1ydraulic fluid power. Determination of particulate contamination $y automatic counting using
the light e/tinction principle
ISO 11507:2001
Paints and varnishes. </posure of coatings to artificial weathering. </posure to fluorescent D7
and water
ISO 11512:1995
0achinery for forestry. -racked special machines. Performance criteria for $rake systems
ISO 11520-2:2001
3gricultural grain driers. Determination of drying performance. 3dditional procedures and crop-
specific re=uirements
ISO 11529-1:1998
0illing cutters. Designation. Shank type end mills of solid or tipped design
ISO 11529-2:1998
0illing cutters. Designation. Shank type and $ore type milling cutters with inde/a$le inserts
ISO 11533:1996
!ron ores. Determination of co$alt content. >lame atomic a$sorption spectrometric method
ISO 11539:1999
"phthalmic optics. &ontact lenses. &lassification and contact lens materials
ISO 11541:2002
?atural gas. Determination of water content at high pressure
ISO 11542-1:2001
Plastics. Dltra-high-molecular-weight polyethylene (P<-D10;) moulding and e/trusion
materials. Designation system and $asis for specifications
ISO 11542-2:1999
Plastics. Dltra-high-molecular-weight polyethylene (P<-D10;) moulding and e/trusion
materials. Preparation of test specimens and determination of properties
ISO 11543:2002
0odified starch. Determination of hydro/ypropyl content. 0ethod using proton nuclear
magnetic resonance (?0#) spectrometry
ISO%IEC 11544:1995
!nformation technology. &oded representation of picture and audio information. Progressive $i-
level image compression
ISO 11545:2001
3gricultural irrigation e=uipment. &entre-pivot and moving lateral irrigation machines with
sprayer or sprinkler no..les. Determination of uniformity of water distri$ution
ISO 11546-1:1996
3coustics. Determination of sound insulation performances of enclosures. 0easurements under
la$oratory conditions (for declaration purposes)
ISO 11546-2:1996
3coustics. Determination of sound insulation performances of enclosures. 0easurements in situ
(for acceptance and verification purposes)
ISO 11547:1996
Small craft. Start-in-gear protection
ISO 11551:1997
"ptics and optical instruments. 2asers and laser-related e=uipment. -est method for a$sorptance
of optical laser components
ISO &' 11552:1997
2asers and laser-related e=uipment. 2aser materials-processing machines. Performance
specifications and $enchmarks for cutting of metals
ISO 11554:2003
"ptics and optical instruments. 2asers and laser-related e=uipment. -est methods for laser $eam
power% energy and temporal characteristics
ISO 11556:1998
Paper and $oard. Determination of curl using a single vertically suspended test piece
ISO%IEC 11557:1992
!nformation technology. '%,) mm wide magnetic tape cartridge for information interchange.
1elical scan recording. DDS-D& format using *A m and EA m length tapes
ISO%IEC 11558:1992
!nformation technology. Data compression for information interchange. 3daptive coding with
em$edded dictionary. D&24 3lgorithm
ISO%IEC 11559:1993
!nformation technology. Data interchange on )@%: mm wide ),-track magnetic tape cartridges.
</tended format
ISO%IEC 11560:1992
!nformation technology. !nformation interchange on )'A mm optical disk cartridges using the
magneto-optical effect% for write once% read multiple functionality
ISO 11561:1999
3geing of thermal insulation materials. Determination of the long-term change in thermal
resistance of closed-cell plastics (accelerated la$oratory test methods)
ISO 11562:1998
Geometric product specifications (GPS). Surface te/ture6 Profile method. 0etrological
characteristics of phase correct filters
ISO 11563:2003
&rude petroleum and petroleum products. Bulk cargo transfer. Guidelines for achieving the
fullness of pipelines
ISO 11564:1998
Stationary source emissions. Determination of the mass concentration of nitrogen o/ides.
?aphthylethylenediamine photometric method
ISO 11565:1998
#oad vehicles. Spark plugs. -est methods and re=uirements
ISO 11566:1996
&ar$on fi$re. Determination of the tensile properties of single-filament specimens
ISO 11567:1995
&ar$on fi$re. Determination of filament diameter and cross-sectional area
ISO%IEC 11569:1993
!nformation technology. -elecommunications and information e/change $etween systems. @*-
pole interface connector matea$ility dimensions and contact num$er assignments
ISO%IEC 11570:1992
!nformation technology. -elecommunications and information e/change $etween systems. "pen
systems interconnection. -ransport protocol identification mechanism
ISO%IEC 11573:1994
!nformation technology. -elecommunications and information e/change $etween systems.
Synchroni.ation methods and technical re=uirements for Private !ntegrated Services ?etworks
ISO%IEC 11575:1995
!nformation technology. -elecommunications and information e/change $etween systems.
Protocol mappings for the "S! data link service
ISO%IEC 11576:1994
!nformation technology. Procedure for the registration of algorithms for the lossless compression
of data
ISO%IEC 11577:1995
!nformation technology. "pen systems interconnection. ?etwork layer security protocol
ISO%IEC 11578:1996
!nformation technology. "pen systems interconnection. #emote procedure call (#P&)
ISO%IEC 11586-1:1996
!nformation technology. "pen Systems !nterconnection. Generic upper layers security.
"verview% models and notation
ISO%IEC 11586-2:1996
!nformation technology. "pen Systems !nterconnection. Generic upper layers security. Security
e/change service element (S<S<) service definition
ISO%IEC 11586-3:1996
!nformation technology. "pen systems interconnection. Generic upper layers security. Security
e/change service element (S<S<) protocol specification
ISO%IEC 11586-4:1996
!nformation technology. "pen systems interconnection. Generic upper layers security. Protecting
transfer synta/ specification
ISO%IEC 11586-5:1997
!nformation technology. "pen systems interconnection. Generic upper layers security. Security
e/change service element (S<S<) protocol implementation conformance statement (P!&S)
proforma
ISO%IEC 11586-6:1997
!nformation technology. "pen systems interconnection. Generic upper layers security. Protecting
transfer synta/ protocol implementation conformance statement (P!&S) proforma
ISO%IEC 11587:1996
!nformation technology. "pen systems interconnection. 3pplication conte/t for systems
management with transaction processing
ISO%IEC 11588-3:1997
!nformation technology. 0essage handling systems (01S) management. 2ogging information
ISO%IEC 11588-8:1997
!nformation technology. 0essage handling systems (01S) management. 0essage transfer agent
management
ISO%IEC &' 11589:1995
!nformation technology. "pen systems interconnection. 2"-"S description of the &&# service
ISO%IEC &' 11590:1995
!nformation technology. "pen systems interconnection. 2"-"S description of the &&# protocol
ISO 11591:2001
Small craft% engine driven. >ield of vision from helm position
ISO 11592:2001
Small craft less than , m length of hull. Determination of ma/imum propulsion power rating
ISO 11593:1998
0anipulating industrial ro$ots. 3utomatic end effector systems. 7oca$ulary and presentation of
characteristics
ISO 11599:1997
Determination of gas porosity and gas permea$ility of hydraulic $inders containing em$edded
radioactive waste
ISO 11600:2002
Building construction. 5ointing products. &lassification and re=uirements for sealants
ISO 11605:1995
Paper and $oard. &ali$ration of varia$le-area flowmeters
ISO 11606:2001
Ships and marine technology. 0arine electromagnetic compasses
ISO 11608-1:2001
Pen-in+ectors for medical use. Pen-in+ectors. #e=uirements and test methods
ISO 11608-2:2001
Pen-in+ectors for medical use. ?eedles. #e=uirements and test methods
ISO 11608-3:2001
Pen-in+ectors for medical use. >inished cartridges. #e=uirements and test methods
ISO 11609:1998
Dentistry. -oothpastes. #e=uirements% test methods and marking
ISO 11614:1999
#eciprocating internal com$ustion compression-ignition engines. 3pparatus for measurement of
the opacity and for determination of the light a$sorption coefficient of e/haust gas
ISO 11620:1998
!nformation and documentation. 2i$rary performance indicators
ISO 11623:2002
-ransporta$le gas cylinders. Periodic inspection and testing of composite gas cylinders
ISO 11628:1995
Graphic technology. Prints and printing inks. Determination of resistance of prints to acids
ISO 11630:1997
&ranes. 0easurement of wheel alignment
ISO 11631:1998
0easurement of fluid flow. 0ethods of specifying flowmeter performance
ISO 11632:1998
Stationary source emissions. Determination of mass concentration of sulfur dio/ide. !on
chromatography method
ISO 11640:1998
2eather. -ests for colour fastness. &olour fastness to cycles of to-and-fro ru$$ing
ISO 11642:1998
2eather. -ests for colour fastness. &olour fastness to water
ISO 11643:1998
2eather. -ests for colour fastness. &olour fastness of small samples to dry-cleaning solutions
ISO 11646:1998
2eather. 0easurement of area
ISO 11648-1:2003
Statistical aspects of sampling from $ulk materials. General principles
ISO 11648-2:2001
Statistical aspects of sampling from $ulk materials. Sampling of particulate materials
ISO 11654:1997
3coustics. Sound a$sor$ers for use in $uildings. #ating of sound a$sorption
ISO 11667:2000
>i$re reinforced plastics. 0oulding compounds and prepregs. Determination of resin%
reinforcement-fi$re and mineral-filler content. Dissolution methods
ISO 11668:2001
Binders for paints and varnishes. &hlorinated polymeri.ation resins. General methods of test
ISO 11670:2003
2asers and laser-related e=uipment. -est methods for laser $eam parameters. Beam positional
sta$ility
ISO 11674:2001
Ships and marine technology. 1eading control systems
ISO 11680-1:2001
0achinery for forestry. Safety re=uirements and testing for pole-mounted powered pruners.
Dnits fitted with an integral com$ustion engine
ISO 11680-2:2001
0achinery for forestry. Safety re=uirements and testing for pole-mounted powered pruners.
Dnits for use with a $ack-pack power source
ISO 11681-2:1998
0achinery for forestry. Porta$le chainsaws. Safety re=uirements and testing. &hainsaws for tree
service
ISO 11682:1993
Brush-cutters and grass trimmers. -echnical data
ISO 11683:1997
Packaging. -actile warnings of danger. #e=uirements
ISO 11688-1:1998
3coustics. #ecommended practice for the design of low-noise machinery and e=uipment.
Planning
ISO%&' 11688-2:2001
3coustics. #ecommended practice for the design of low-noise machinery and e=uipment.
!ntroduction to the physics of low-noise design
ISO 11689:1997
3coustics. Procedure for the comparison of noise-emission data for machinery and e=uipment
ISO 11690-1:1997
3coustics. #ecommended practice for the design of low-noise workplaces containing machinery.
?oise control strategies
ISO 11690-2:1997
3coustics. #ecommended practice for the design of low-noise workplaces containing machinery.
?oise control measures
ISO 11690-3:1999
3coustics. #ecommended practice for the design of low-noise workplaces containing machinery.
Sound propagation and noise prediction in workrooms
ISO 11691:1997
3coustics. 0easurement of insertion loss of ducted silencers without flow. 2a$oratory survey
method
ISO%IEC 11693:2000
!dentification cards. "ptical memory cards. General characteristics
ISO%IEC 11694-1:2000
!dentification cards. "ptical memory cards. 2inear recording method. Physical characteristics
ISO%IEC 11694-2:2000
!dentification cards. "ptical memory cards. 2inear recording method. Dimensions and location
of the accessi$le optical area
ISO%IEC 11694-3:2001
!dentification cards. "ptical memory cards. 2inear recording method. "ptical properties and
characteristics
ISO%IEC 11694-4:2001
!dentification cards. "ptical memory cards. 2inear recording method. 2ogical data structures
ISO%&' 11696-1:1999
Dses of reaction to fire test results. 3pplication of test results to predict fire performance of
internal linings and other $uilding products
ISO%&' 11696-2:1999
Dses of reaction to fire test results. >ire ha.ard assessment of construction products
ISO 11698-1:2000
0icrographics. 0ethods of measuring image =uality produced $y aperture card scanners.
&haracteristics of the test images
ISO 11698-2:2000
0icrographics. 0ethods of measuring image =uality produced $y aperture card scanners. 9uality
criteria and control
ISO 11715-1:1998
"phthalmic optics. >ormat of digital data files for data transfer for profiling of spectacle lenses.
-wo-dimensional tracers
ISO 11721-1:2001
-e/tiles. Determination of resistance of cellulose-containing te/tiles to micro-organisms. Soil
$urial test. 3ssessment of rot-retardant finishing
DD ISO%&S 11725:2002
Solid mineral fuels. Determination of nitrogen. Semi-micro gasification method
ISO 11727:1999
Pneumatic fluid power. !dentification of ports and control mechanisms of control valves and
other components
ISO 11732:1997
;ater =uality. Determination of ammonium nitrogen $y flow analysis (&>3 and >!3) and
spectrometric detection
ISO 11733:1998
;ater =uality. <valuation of the elimination and $iodegrada$ility of organic compounds in an
a=ueous medium. 3ctivated sludge simulation test
ISO 11734:1999
;ater =uality. <valuation of the KultimateK anaero$ic $iodegrada$ility of organic compounds in
digested sludge. 0ethod $y measurement of the $iogas production
ISO%IEC &' 11735:1996
!nformation technology. </tensions for real-time 3da
ISO 11737-2:2000
Sterili.ation of medical devices. 0icro$iological methods. -ests of sterility performed in the
validation of a sterili.ation process
ISO 11752:2000
>le/i$le cellular polymeric materials. 0oulded and e/truded sponge or e/panded cellular ru$$er
products. &ompressi$ility test on finished parts
ISO 11754:2003
Space data and information transfer systems. -elemetry channel coding
ISO%IEC 11756:1999
!nformation technology. Programming languages. 0
ISO 11758:1997
#u$$er and plastics hoses. </posure to a /enon arc lamp. Determination of changes in colour
and appearance
ISO &' 11761:1992
2ight-gauge metal containers. #ound open-top cans. &lassification of can si.es $y construction
type
ISO &' 11762:1992
2ight-gauge metal containers. #ound open-top cans for li=uid products with added gas.
&lassification of can si.es $y construction type
ISO%IEC 11770-3:1999
!nformation technology. Security techni=ues. Gey management. 0echanisms using asymmetric
techni=ues
ISO &' 11776:1992
2ight gauge metal containers. ?on-round open-top cans. &ans defined $y their nominal
capacities
ISO 11782-1:1998
&orrosion of metal and alloys. &orrosion fatigue testing. &ycles to failure testing
ISO 11782-2:1998
&orrosion of metal and alloys. &orrosion fatigue testing. &rack propagation testing using
precracked specimens
ISO 11783-2:2002
-ractors and machinery for agriculture and forestry. Serial control and communications data
network. Physical layer
ISO 11783-3:1998
-ractors and machinery for agriculture and forestry. Serial control and communications data
network. Data link layer
ISO 11783-7:2002
-ractors and machinery for agriculture and forestry. Serial control and communications data
network. !mplement messages application layer
ISO 11783-9:2002
-ractors and machinery for agriculture and forestry. Serial control and communications data
network. -ractor <&D
ISO 11784:1996
#adio-fre=uency identification of animals. &ode structure
ISO 11785:1996
#adio-fre=uency identification of animals. -echnical concept
ISO 11786:1995
3gricultural tractors and machinery. -ractor mounted sensor interface. Specification
ISO 11787:1995
0achinery for agriculture and forestry. Data interchange $etween management computer and
process computers. Data interchange synta/
ISO 11788-1:1997
<lectronic data interchange $etween information systems in agriculture. 3gricultural data
element dictionary. General description
ISO 11788-3:2000
<lectronic data interchange $etween information systems in agriculture. 3gricultural data
element dictionary. Pig farming
ISO 11798:1999
!nformation and documentation. Permanence and dura$ility of writing% printing and copying on
paper. #e=uirements and test methods
ISO 11800:1998
!nformation and documentation. #e=uirements for $inding materials and methods used in the
manufacture of $ooks
ISO%IEC &' 11802-5:1997
!nformation technology. -elecommunications and information e/change $etween systems. 2ocal
and metropolitan area networks. -echnical reports and guidelines. 0edia access control (03&)
$ridging of <thernet [email protected] in 2ocal 3rea ?etworks
ISO 11806:1997
3gricultural and forestry machinery. Porta$le hand-held com$ustion engine driven $rush cutters
and grass trimmers. Safety
ISO 11807-1:2001
!ntegrated optics. 7oca$ulary. Basic terms and sym$ols
ISO 11807-2:2001
!ntegrated optics. 7oca$ulary. -erms used in classification
ISO 11810:2002
"ptics and optical instruments. 2asers and laser-related e=uipment. -est method for the laser-
resistance of surgical drapes andor patient-protective covers
ISO 11812:2002
Small craft. ;atertight cockpits and =uick-draining cockpits
ISO 11813:1998
0ilk and milk products. Determination of .inc content. >lame atomic a$sorption spectrometric
method
ISO 11814:2002
Dried milk. 3ssessment of heat treatment intensity. 0ethod using high-performance li=uid
chromatography
ISO 11816-1:2000
0ilk and milk products. Determination of alkaline phosphatase activity using a fluorimetric
method. 0ilk and milk $ased drinks
ISO 11816-2:2003
0ilk and milk products. Determination of alkaline phosphatase activity using a fluorimetric
method. >luorometric method for cheese
ISO 11819-1:2001
3coustics. 0easurement of the influence of road surfaces on traffic noise. Statistical pass-$y
method
ISO 11820:1997
3coustics. 0easurements on silencers in situ
ISO 11821:1997
3coustics. 0easurement of the in situ sound attenuation of a remova$le screen
ISO 11822:1996
!nformation and documentation. </tension of the 3ra$ic alpha$et coded character set for
$i$liographic information interchange
ISO 11833-1:1998
Plastics. Dnplastici.ed poly(vinyl chloride) sheets. -apes% dimensions and characteristics. Sheets
of thickness not less than ) mm
ISO 11833-2:1998
Plastics. Dnplastici.ed poly(vinyl chloride) sheets. -apes% dimensions and characteristics. Sheets
of thickness less than ) mm
ISO 11841-1:2000
#oad vehicles and internal com$ustion engines. >ilter voca$ulary. Definitions of filters and filter
components
ISO 11841-2:2000
#oad vehicles and internal com$ustion engines. >ilter voca$ulary. Definitions of characteristics
of filters and their components
ISO 11843-1:1997
&apa$ility of detection. -erms and conditions
ISO 11843-2:2000
&apa$ility of detection. 0ethodology in the linear cali$ration case
ISO 11843-3:2003
&apa$ility of detection. 0ethodology for determination of the critical value for the response
varia$le when no cali$ration data are used
ISO 11846:1995
&orrosion of metals and alloys. Determination of resistance to intergranular corrosion of solution
heat-treata$le aluminium alloys
ISO 11850:2003
0achinery for forestry. Self-propelled machinery. Safety re=uirements
DD ISO%"AS 11856:2003
-e/tile floor coverings. -est methods for the determination of fi$re $ind
ISO 11857:2002
-e/tile floor coverings. Determination of resistance to delamination
ISO 11858:1999
-e/tile floor coverings. Determination of fria$ility of attached foams
ISO 11859:1999
-e/tile floor coverings. Pure wool% hand-knotted pile carpets. Specification
ISO 11860:1999
-e/tile floor coverings. 5ute carpet $acking fa$ric. Specification
ISO 11861:1999
-e/tile floor coverings. &oir mats. -ypes and specification
ISO 11866-1:1997
0ilk and milk products. <numeration of presumptive B:!<scherichia coliB:#. 0ost pro$a$le
num$er techni=ue
ISO 11866-2:1997
0ilk and milk products. <numeration of presumptive B:!<scherichia coliB:#. 0ost pro$a$le
num$er techni=ue using C-methylum$elliferyl-BG$-D-glucuronide (0DG)
ISO 11866-3:1997
0ilk and milk products. <numeration of presumptive B:!<scherichia coliB:#. &olony-count
techni=ue at CCBAD& using mem$ranes
ISO 11870:2000
0ilk and milk products. Determination of fat content. General guidance on the use of
$utyrometric methods
ISO 11885:1998
;ater =uality. Determination of '' elements $y inductively coupled plasma atomic emission
spectroscopy
ISO 11886:2002
Building construction machinery and e=uipment. Pile driving and e/tracting e=uipment.
-erminology and commercial specifications
ISO 11890-1:2001
Paints and varnishes. Determination of volatile organic compound (7"&) content. Difference
method
ISO 11890-2:2001
Paints and varnishes. Determination of volatile organic compound (7"&) content. Gas
chromatographic method
ISO 11897:2001
Packaging. Sacks made from thermoplastic fle/i$le film. -ear propagation on edge folds
ISO 11900-2:2001
-ools for pressing. Ball-lock punch retainers. -ypes & and D% reduced for light duty
ISO 11904-1:2002
3coustics. Determination of sound immission from sound sources placed close to the ear.
-echni=ue using a microphone in a real ear (0!#< techni=ue)
ISO 11905-1:1998
;ater =uality. Determination of nitrogen. 0ethod using o/idative digestion with pero/odisulfate
ISO 11907-1:1998
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Guidance
ISO 11907-2:1995
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Static method
ISO 11907-3:1998
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic
decomposition method using a travelling furnace
ISO 11907-4:1998
Plastics. Smoke generation. Determination of the corrosivity of fire effluents. Dynamic
decomposition method using a conical radiant heater
ISO 11908:1998
Binders for paints and varnishes. 3mino resins. General methods of test
ISO 11909:1998
Binders for paints and varnishes. Polyisocyanate resins. General methods of test
ISO 11922-1:1997
-hermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. 0etric series
ISO 11922-2:1997
-hermoplastics pipes for the conveyance of fluids. Dimensions and tolerances. !nch-$ased series
ISO &' 11925-1:1999
#eaction to fire tests. !gnita$ility of $uilding products su$+ected to direct impingement of flame.
Guidance on ignita$ility
ISO 11925-2:2002
#eaction to fire tests. !gnita$ility of $uilding products su$+ected to direct impingement of flame.
Single-flame source test
ISO 11925-3:1997
#eaction to fire tests. !gnita$ility of $uilding products su$+ected to direct impingement of flame.
0ulti-source test
ISO 11928-1:2000
0icrographics. 9uality control of graphic &"0 recorders. &haracteristics of the test frames
ISO 11928-2:2000
0icrographics. 9uality control of graphic &"0 recorders. 9uality criteria and control
ISO 11929-4:2001
Determination of the detection limit and decision threshold for ioni.ing radiation measurements.
>undamentals and application to measurements $y use of linear-scale analogue ratemeters%
without the influence of sample treatment
ISO 11933-3:1998
&omponents for containment enclosures. -ransfer systems such as plain doors% airlock cham$ers%
dou$le door transfer systems% leaktight connections for waste drums
ISO 11943:1999
1ydraulic fluid power. "n-line automatic particle-counting systems for li=uids. 0ethods of
cali$ration and validation
ISO 11944:1993
#ound general use light gauge metal containers. ?ominal diameters for cylindrical and tapered
cans up to )A AAA ml capacity
ISO 11948-1:1996
Drine-a$sor$ing aids. ;hole-product testing
ISO 11948-2:1998
Drine-a$sor$ing aids. Determination of short-time li=uid release (leakage) under conditions of
light incontinence and low pressure
ISO 11957:1997
3coustics. Determination of sound insulation performance of ca$ins. 2a$oratory and in situ
measurements
ISO 11960:2001
Petroleum and natural gas industries. Steel pipes for use as casing or tu$ing for wells
ISO 11961:1997
Petroleum and natural gas industries. Steel pipes for use as drill pipe. Specification
ISO 11962:2002
0icrographics. !mage mark ($lip) used with )* mm and '( mm roll microfilm
ISO 11963:1996
Plastics. Polycar$onate sheets. -ypes% dimensions and characteristics
ISO 11969:1996
;ater =uality. Determination of arsenic. 3tomic a$sorption spectrometric method (hydride
techni=ue)
ISO &' 11974:1997
0easurement of li=uid flow in open channels. <lectromagnetic current meters
ISO 11978:2000
"phthalmic optics. &ontact lenses and contact lens care products. !nformation supplied $y the
manufacturer
ISO 11979-1:2000
"phthalmic implants. !ntraocular lenses. 7oca$ulary
ISO 11979-2:2000
"phthalmic implants. !ntraocular lenses. "ptical properties and test methods
ISO 11979-4:2000
"phthalmic implants. !ntraocular lenses. 2a$elling and information
ISO 11980:1998
"phthalmic optics. &ontact lenses and contact lens care products. Guidance for clinical
investigations
ISO 11981:1999
"phthalmic optics. &ontact lenses and contact lens care products. Determination of physical
compati$ility of contact lens care products with contact lenses
ISO 11984:2000
"phthalmic optics. &ontact lenses. Determination of rigid lens fle/ure and $reakage
ISO 11985:1998
"phthalmic optics. &ontact lenses. 3geing $y e/posure to D7 and visi$le radiation (in vitro
method)
ISO 11986:2001
"phthalmic optics. &ontact lenses and contact lens care products. Guidelines for the
determination of preservative uptake and release
ISO 11987:1998
"phthalmic optics. &ontact lenses. Determination of shelf-life
ISO 11990:2003
"ptics and optical instruments. 2asers and laser-related e=uipment. Determination of laser
resistance of tracheal tu$e shafts
ISO &' 11991:1995
Guidance on airway management during laser surgery of upper airway
ISO 11994:1997
&ranes. 3vaila$ility. 7oca$ulary
ISO 11998:2001
Paints and varnishes. Determination of wet-scru$ resistance and cleana$ility of coatings
ISO 12000:2000
Plasticsru$$er. Polymer dispersions and ru$$er latices (natural and synthetic). Definitions and
review of test methods
ISO 12001:1997
3coustics. ?oise emitted $y machinery and e=uipment. #ules for the drafting and presentation of
a noise test code
ISO 12003-1:2002
3gricultural and forestry tractors. ?arrow-track wheeled tractors. >ront-mounted roll-over
protective structures
ISO 12003-2:2002
3gricultural and forestry tractors. ?arrow-track wheeled tractors. #ear-mounted roll-over
protective structures
ISO 12005:2003
2asers and laser-related e=uipment. -est methods for laser $eam parameters. Polari.ation
ISO 12006-2:2001
Building construction. "rgani.ation of information a$out construction works. >ramework for
classification of information
ISO%"AS 12006-3:2001
Building construction. "rgani.ation of information a$out construction works. >ramework for
o$+ect-oriented information e/change
ISO 12017:1996
Plastics. Poly(methyl methacrylate) dou$le- and triple-skin sheets. -est methods
ISO 12020:2000
;ater =uality. Determination of aluminium. 3tomic a$sorption spectrometric methods
ISO%&' 12031:2000
0icrographics. !nspection of silver-gelatin microforms for evidence of deterioration
ISO 12040:1997
Graphic technology. Prints and printing inks. 3ssessment of light fastness using filtered /enon
arc light
ISO%IEC 12042:1993
!nformation technology. Data compression for information interchange. Binary arithmetic coding
algorithm
ISO 12043:1995
#olling $earings. Single-row cylindrical roller $earings. &hamfer dimensions for loose ri$ and
non-ri$ sides
ISO 12044:1995
#olling $earings. Single-row angular contact $all $earings. &hamfer dimensions for outer ring
non-thrust side
ISO 12048:2001
Packaging. &omplete% filled transport packages. &ompression and stacking tests using a
compression tester
ISO 12058-1:2002
Plastics. Determination of viscosity using a falling-$all viscometer. !nclined-tu$e method
ISO%IEC IS" 12059-0:1995
!nformation technology. !nternational standardi.ed profiles. "S! management. &ommon
information for management functions. &ommon definitions for management function profiles
ISO%IEC IS" 12059-1:1995
!nformation technology. !nternational standardi.ed profiles. "S! management. &ommon
information for management functions. "$+ect management
ISO%IEC IS" 12059-2:1995
!nformation technology. !nternational standardi.ed profiles. "S! management. &ommon
information for management functions. State management
ISO%IEC IS" 12059-3:1995
!nformation technology. !nternational standardi.ed profiles. "S! management. &ommon
information for management functions. 3ttri$utes for representing relationships
ISO%IEC IS" 12059-4:1995
!nformation technology. !nternational standardi.ed profiles. "S! management. &ommon
information for management functions. 3larm reporting
ISO%IEC IS" 12059-5:1995
!nformation technology. !nternational standardi.ed profiles. "S! management. &ommon
information for management functions. <vent report management
ISO%IEC IS" 12059-6:1995
!nformation technology. !nternational standardi.ed profiles. "S! management. &ommon
information for management functions. 2og control
ISO%IEC IS" 12060-8:1996
!nformation technology. !nternational standardi.ed profiles. "S! management. 0anagement
functions. 3"0@('/. Summari.ation o$+ects (including profiles 3"0@(')-3"0@('E)
IS" 12061-1:1997
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. !ntroduction to the transaction processing profiles
IS" 12061-2:1997
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. Support of "S! -P 3PDDs
IS" 12061-3:1997
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. Support of &&# 3PDDs
IS" 12061-4:1997
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. Support of session% presentation and 3&S< PDDs
IS" 12061-5:1996
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. 3pplication supported transactions. Polari.ed control (3-P)))
IS" 12061-6:1996
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. 3pplication supported transactions. Shared control (3-P)@)
IS" 12061-7:1996
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. Provider supported unchained transactions. Polari.ed control
(3-P@))
IS" 12061-8:1996
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. Provider supported unchained transactions. Shared control
(3-P@@)
IS" 12061-9:1996
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. Provider supported chained transactions. Polari.ed control
(3-P'))
IS" 12061-10:1996
!nformation technology. "pen systems interconnection. !nternational standardi.ed profiles6 "S!
distri$uted transaction procesing. Provider supported chained transactions. Shared control
(3-P'@)
IS" 12064-1:1998
!nformation technology. !nternational standardi.ed profile >"D))@. "pen document format6
image applications. Simple document structure. #aster graphics content architecture. Document
application profile (D3P) (!S"!<& !SP )@A*C-)6)EE()
IS" 12068-1:1997
!nformation technology. !nternational standardi.ed profile >D! C. Directory data definitions. Dse
of the directory for "S! -P. >D! C). Basic naming and addressing
IS" 12068-2:1997
!nformation technology. !nternational standardi.ed profile >D! C. Directory data definitions. Dse
of the directory for "S! -P. >D! C@. <nhanced naming and addressing
IS" 12070-1:1997
!nformation technology. !nternational standardi.ed profiles >&Snnn. &haracter set ,-$it code
structure $ased on !S"!<& @A@@. >&S))). @A@@ "ption )
ISO%IEC IS" 12073:2000
!nformation technology. !nternational standardi.ed profile >D)* directory data definitions. <D!
use of the directory
ISO 12080-1:2000
Dried skimmed milk. Determination of vitamin 3 content. &olorimetric method
ISO 12080-2:2000
Dried skimmed milk. Determination of vitamin 3 content. 0ethod using high-performance
li=uid chromatography
ISO 12081:1998
0ilk. Determination of calcium content. -itrimetric method
ISO 12085:1998
Geometric Product Specification (GPS). Surface te/ture. Profile method. 0otif parameters
ISO 12086-1:2001
Plastics. >luoropolymer dispersions and moulding and e/trusion materials. Designation system
and $asis for specifications
ISO 12086-2:2001
Plastics. >luoropolymer dispersions and moulding and e/trusion materials. Preparation of test
specimens and determination of properties
ISO%IEC 12087-1:1995
!nformation technology. &omputer graphics and image processing. !mage processing and
interchange (!P!). >unctional specification. &ommon architecture for imaging
ISO%IEC 12087-2:1994
!nformation technology. &omputer graphics and image processing. !mage processing and
interchange (!P!). >unctional specification. ProgrammerKs imaging kernel system application
program interface
ISO%IEC 12087-3:1995
!nformation technology. &omputer graphics and image processing. !mage processing and
interchange (!P!). >unctional specification. !mage interchange facility (!!>)
ISO%IEC 12088-4:1995
!nformation technology. &omputer graphics and image processing. !mage processing and
interchange. 3pplication program interface language $indings. &
ISO%IEC 12089:1997
!nformation technology. &omputer graphics and image processing. <ncoding for the image
interchange facility (!!>)
ISO 12097-1:2002
#oad vehicles. 3ir$ag components. 7oca$ulary
ISO 12097-3:2002
#oad vehicles. 3ir$ag components. -esting of inflator assem$lies
ISO 12103-1:1997
#oad vehicles. -est dust for filter evaluation. 3ri.ona test dust
ISO 12103-2:1997
#oad vehicles. -est dust for filter evaluation. 3luminium o/ide test dust
ISO 12114:1997
>i$re-reinforced plastics. -hermosetting moulding compounds and prepregs. Determination of
cure characteristics
ISO 12115:1997
>i$re-reinforced plastics. -hermosetting moulding compounds and prepregs. Determination of
flowa$ility% maturation and shelf life
ISO%IEC 12119:1994
!nformation technology. Software packages. 9uality re=uirements and testing
ISO 12124:2001
3coustics. Procedures for the measurement of real-ear acoustical characteristics of hearing aids
ISO 12128:2001
Plain $earings. 2u$rication holes% grooves and pockets. Dimensions% types% designation and their
application to $earing $ushes
ISO 12129-2:1995
Plain $earings. -olerances on form and position and surface roughness for shafts% flanges and
thrust collars
ISO 12132:1999
Plain $earings. 9uality assurance of thin-walled half $earings. Design >0<3
ISO 12138:1997
-e/tiles. Domestic laundering procedures for te/tile fa$rics prior to flamma$ility testing
ISO 12140:1998
3gricultural machinery. 3gricultural trailers and trailed e=uipment. Draw$ar +acks
ISO 12141:2002
Stationary source emissions. Determination of mass concentration of particulate matter (dust) at
low concentrations. 0anual gravimetric method
ISO 12142:2001
<lectronic imaging. 0edia error monitoring and reporting techni=ues for verification of stored
data on optical digital data disks
ISO 12151-1:1999
&onnections for hydraulic fluid power and general use. 1ose fittings. 1ose fittings with !S"
,C'C-' "-ring face-seal ends
ISO 12151-2:2003
&onnections for hydraulic fluid power and general use. 1ose fittings. 1ose fittings with !S"
,C'C-) and !S" ,C'C-C @CBAD cone connector ends with "-rings
ISO 12151-3:1999
&onnections for hydraulic fluid power and general use. 1ose fittings. 1ose fittings with !S"
*)*@ flange ends
ISO 12156-1:1997
Diesel fuel. 3ssessment of lu$ricity using the high-fre=uency reciprocating rig (1>##). -est
method
ISO 12156-1:2000
Diesel fuel. 3ssessment of lu$ricity using the high-fre=uency reciprocating rig (1>##). -est
method
ISO 12156-2:1998
Diesel fuel. 3ssessment of lu$ricity using the high-fre=uency reciprocating rig (1>##). 2imit
ISO 12162:1996
-hermoplastics materials for pipes and fittings for pressure applications. &lassification and
design. "verall service (design) coefficient
ISO 12163:2000
Dental $aseplatemodelling wa/
ISO 12164-1:2001
1ollow taper interface with flange contact surface. Shanks. Dimensions
ISO 12164-2:2001
1ollow taper interface with flange contact surface. #eceivers. Dimensions
ISO 12165:2000
-ools for moulding. &omponents of compression and in+ection moulds and diecasting dies.
-erms and sym$ols
ISO 12171:2002
Space data and information transfer systems. -elecommand. &hannel service
ISO 12172:2003
Space data and information transfer systems. -elecommand. Data routing service
ISO 12173:2003
Space data and information transfer systems. -elecommand. &ommand operation procedures
ISO 12174:2003
Space data and information transfer systems. -elecommand. 3rchitectural specification for the
data management service
ISO 12179:2001
Geometrical product specifications (GPS). Surface te/ture. Profile method. &ali$ration of
contact (stylus) instruments
ISO%IEC &' 12182:1998
!nformation technology. &ategori.ation of software
ISO 12185:1996
0ethods of test for petroleum and its products. &rude petroleum and petroleum products.
Determination of density. "scillating D-tu$e method
ISO 12192:2002
Paper and $oard. &ompressive strength. #ing crush method
ISO 12193:2000
3nimal and vegeta$le fats and oils. Determination of lead content. Graphite furnace atomic
a$sorption method
ISO 12197:1996
;oodruff keyseat cutters. Dimensions
ISO 12199:2000
3lpha$etical ordering of multilingual terminological and le/icographical data represented in the
2atin alpha$et
ISO 12205:1996
0ethods of test for petroleum and its products. Petroleum products. Determination of the
o/idation sta$ility of middle-distillate fuels
ISO 12209-1:2001
Gas cylinders. "utlet connections for gas cylinder valves for compressed $reatha$le air. Foke
type connections
ISO 12209-2:2001
Gas cylinders. "utlet connections for gas cylinder valves for compressed $reatha$le air.
-hreaded connections
ISO 12209-3:2001
Gas cylinders. "utlet connections for gas cylinder valves for compressed $reatha$le air. 3daptor
for @'A $ar valves
ISO 12213-1:1997
?atural gas. &alculation of compression factors. !ntroduction and guidelines
ISO 12213-2:1997
?atural gas. &alculation of compression factors. &alculation using a molar composition analysis
ISO 12213-3:1997
?atural gas. &alculation of compression factors. &alculation using measured physical properties
ISO 12214:2002
#oad vehicles. Direction-of-motion stereotypes for automotive hand controls
ISO 12215-1:2000
Small craft. 1ull construction and scantlings. 0aterials. -hermosetting resins% glass-fi$re
reinforcement% reference laminate
ISO 12215-2:2002
Small craft. 1ull construction and scantlings. 0aterials. &ore materials for sandwich
construction% em$edded materials
ISO 12215-3:2002
Small craft. 1ull construction and scantlings. 0aterials. Steel% aluminium alloys% wood% other
materials
ISO 12215-4:2002
Small craft. 1ull construction and scantlings. ;orkshop and manufacturing
ISO 12216:2002
Small craft. ;indows% portlights% hatches% deadlights and doors. Strength and watertightness
re=uirements
ISO 12217-1:2002
Small craft. Sta$ility and $uoyancy assessment and categori.ation. ?on-sailing $oats of hull
length greater than or e=ual to * m
ISO 12217-2:2002
Small craft. Sta$ility and $uoyancy assessment and categori.ation. Sailing $oats of hull length
greater than or e=ual to * m
ISO 12217-3:2002
Small craft. Sta$ility and $uoyancy assessment and categori.ation. Boats of hull length less than
* m
ISO 12218:1997
Graphic technology. Process control. "ffset platemaking
ISO 12222:2000
&inematography. 0anufacturer-printed% latent image identification on )* mm% '( mm O *( mm
film. Specifications and dimensions
ISO 12224-1:1998
Solder wire% solid and flu/ cored. Specification and test methods. &lassification and performance
re=uirements
ISO 12224-2:1999
Solder wire% solid and flu/ cored. Specification and test methods. Determination of flu/ content
ISO 12224-3:2003
Solder wire% solid and flu/ cored. Specification and test methods. ;etting $alance test method
for flu/ core solder wire efficacy
ISO 12228:1999
3nimal and vegeta$le fats and oils. Determination of individual and total sterols contents. Gas
chromatographic method
ISO 12231:1997
Photography. <lectronic still picture cameras. -erminology
ISO 12232:1998
Photography. <lectronic still-picture cameras. Determination of !S" speed
ISO 12233:2000
Photography. <lectronic still picture cameras. #esolution measurements
ISO 12234-1:2001
<lectronic still-picture imaging. #emova$le memory. Basic remova$le-memory module
ISO 12234-2:2001
<lectronic still-picture imaging. #emova$le memory. -!>><P image data format
ISO 12236:1996
Geote/tiles and geote/tile-related products. Static puncture test (&B#--est)
ISO 12238:2001
Pneumatic fluid power. Directional control valves. 0easurement of shifting time
ISO 12240-1:1998
Spherical plain $earings. #adial spherical plain $earings
ISO 12240-2:1998
Spherical plain $earings. 3ngular contact radial spherical plain $earings
ISO 12240-3:1998
Spherical plain $earings. -hrust spherical plain $earings
ISO 12240-4:1998
Spherical plain $earings. Spherical plain $earing rod ends
ISO 12241:1998
-hermal insulation for $uilding e=uipment and industrial installations. &alculation rules
ISO%IEC 12246:1993
!nformation technology. , mm wide magnetic tape cartridge dual a.imuth format for information
interchange. 1elical scan recording
ISO%IEC 12247:1993
!nformation technology. '%,) mm wide magnetic tape cartridge for information interchange.
1elical scan recording. DDS format using *A m and EA m length tapes
ISO%IEC 12248:1993
!nformation technology. '%,) mm wide magnetic tape cartridge for information interchange.
1elical scan recording. D3-3D3--D& format using *A m and EA m length tapes
ISO 12256:2002
Drives% internal% cruciform% ri$$ed. 0etric series
ISO 12277:2000
3erospace. Gang channel% self-locking% floating% standard series% with counter$ore%
classifications. ))AA 0Pa (at am$ient temperature))@ABAD&% ))AA 0Pa (at am$ient
temperature)@'(BAD& and ))AA 0Pa (at am$ient temperature)C@(BAD&. Dimensions
ISO 12303:1995
Plain $earings. 9uality characteristics. &alculation of machine and process capa$ilities
ISO 12307-2:2000
Plain $earings. &hecking of wrapped $ushes. &hecking the inside diameter
ISO 12333:2000
3erospace. &onstant displacement hydraulic motors. General specifications for '(AAA kPa
systems
ISO 12334:2000
3erospace. 1ydraulic% pressure-compensated% varia$le delivery pumps. General re=uirements for
'(AAA kPa systems
ISO 12345:2002
Diesel engines. &leanliness assessment of fuel in+ection e=uipment
ISO 12353-1:2002
#oad vehicles. -raffic accident analysis. 7oca$ulary
ISO 12353-2:2003
#oad vehicles. -raffic accident analysis. Guidelines for the use of impact severity measures
ISO 12368:2001
3gricultural vehicles. 0echanical hook-type connections on towing vehicles. -est methods and
re=uirements
ISO%IEC &' 12382:1992
Permuted inde/ of the voca$ulary of information technology
ISO%&' 12391-1:2001
Gas cylinders. #efilla$le seamless steel. Performance tests. Philosophy% $ackground and
conclusions
ISO%&' 12391-2:2002
Gas cylinders. #efilla$le seamless steel. Performance tests. >racture performance tests.
0onotonic $urst tests
ISO%&' 12391-3:2002
Gas cylinders. #efilla$le seamless steel. Performance tests. >racture performance tests. &yclical
$urst tests
ISO%&' 12470:1998
>ire resistance tests. Guidance on the application and e/tension of results
ISO 12472:2003
>ire resistance of tim$er door assem$lies. 0ethod of determining the efficacy of intumescent
seals
ISO 12478-1:1998
&ranes. 0aintenance manual. General
ISO 12543-1:1998
Glass in $uilding. 2aminated glass and laminated safety glass. Definitions and description of
component parts
ISO 12543-3:1998
Glass in $uilding. 2aminated glass and laminated safety glass. 2aminated glass
ISO 12543-4:1998
Glass in $uilding. 2aminated glass and laminated safety glass. -est methods for dura$ility
ISO 12543-5:1998
Glass in $uilding. 2aminated glass and laminated safety glass. Dimensions and edge finishing
ISO 12543-6:1998
Glass in $uilding. 2aminated glass and laminated safety glass. 3ppearance
ISO 12567-1:2000
-hermal performance of windows and doors. Determination of thermal transmittance $y hot $o/
method. &omplete windows and doors
ISO 12569:2001
-hermal insulation in $uildings. Determination of air change in $uildings. -racer gas dilution
method
ISO 12570:2000
1ygrothermal performance of $uilding materials and products. Determination of moisture
content $y drying at elevated temperature
ISO 12571:2000
1ygrothermal performance of $uilding materials and products. Determination of hygroscopic
properties
ISO 12572:2001
1ygrothermal performance of $uilding materials and products. Determination of water vapour
transmission properties
ISO 12606:1997
&inematography. &are and preservation of magnetic audio recordings for motion-pictures and
television
ISO 12608:1996
&inematography. #oom and surround conditions for evaluating television display from telecine
reproduction
ISO 12611:1997
&inematography. 3udio head tones for use in international e/change of '( mm magnetic film
masters. Specifications and location
ISO 12612:1997
&inematography. !nterchange of post-production materials
ISO 12616:2002
-ranslation-oriented terminography
ISO 12634:1996
Graphic technology. Determination of tack of paste inks and vehicles $y a rotary tackmeter
ISO 12635:1996
Graphic technology. Plates for offset printing. Dimensions
ISO 12636:1998
Graphic technology. Blankets for offset printing
ISO 12637-5:2001
Graphic technology. 0ultilingual terminology of printing arts. Screen printing terms
ISO 12639:1998
Graphic technology. Prepress digital data e/change. -ag image file format for image technology
(-!>>!-)
ISO 12640:1997
Graphic technology. Prepress digital data e/change. &0FG standard colour image data
(&0FGS&!D)
ISO 12641:1997
Graphic technology. Prepress digital data e/change. &olour targets for input scanner cali$ration
ISO 12642:1996
Graphic technology. Prepress digital data e/change. !nput data for characteri.ation of C-colour
process printing
ISO 12644:1996
Graphic technology. Determination of rheological properties of paste inks and vehicles $y the
falling rod viscometer
ISO 12645:1998
Graphic technology. Process control. &ertified reference material for opa=ue area cali$ration of
transmission densitometers
ISO 12647-1:1996
Graphic technology. Process control for the manufacture of half-tone colour separations% proof
and production prints. Parameters and measurement methods
ISO 12647-2:1996
Graphic technology. Process control for the manufacture of half-tone colour separations% proof
and production prints. "ffset lithographic processes
ISO 12647-3:1998
Graphic technology. Process control for the manufacture of half-tone colour separations% proof
and production prints. &oldset offset lithography and letterpress on newsprint
ISO 12647-5:2001
Graphic technology. Process control for the manufacture of half-tone colour separations% proof
and production prints. Screen printing
ISO 12651:1999
<lectronic imaging. 7oca$ulary
ISO 12653-1:2000
<lectronic imaging. -est target for the $lack-and-white scanning of office documents.
&haracteristics
ISO 12653-2:2000
<lectronic imaging. -est target for the $lack-and-white scanning of office documents. 0ethod of
use
ISO 12656:2001
0icrographics. Dse of $ar codes on aperture cards
ISO 12676:2000
#efractory products. Determination of resistance to car$on mono/ide
ISO 12677:2003
&hemical analysis of refractory products $y 8#>. >used cast $ead method
ISO 12686:1999
0etallic and other inorganic coatings. 3utomated controlled shot-peening of metallic articles
prior to nickel% autocatalytic nickel or chromium plating% or as a final finish
ISO 12687:1998
0etallic coatings. Porosity tests. 1umid sulfur (flowers of sulfur) test
ISO 12706:2001
?on-destructive testing. -erminology. -erms used in penetrant testing
ISO 12737:1999
0etallic materials. Determination of plane-strain fracture toughness
ISO &' 12764:1997
0easurement of fluid flow in closed conduits. >lowrate measurement $y means of vorte/
shedding flowmeters inserted in circular cross-section conduits running full
ISO%&' 12765:1998
0easurement of fluid flow in closed conduits. 0ethods using transit-time ultrasonic flowmeters
ISO &' 12767:1998
0easurement of fluid flow $y means of pressure-differential devices. Guidelines to the effect of
departure from the specifications and operating conditions given in !S" ()*:-)
ISO 12771:1997
Plastics la$oratory ware. Disposa$le serological pipettes
ISO 12772:1997
2a$oratory glassware. Disposa$le microhaematocrit capillary tu$es
ISO 12775:1997
Guidelines on types of glass of normal $ulk-production composition and their test methods
ISO &' 12776:1995
Pallets. Slip sheets
ISO 12777-1:1997
0ethods of test for pallet +oints. Determination of $ending resistance of pallet nails% other dowel-
type fasteners and staples
ISO 12777-2:2000
0ethods of test for pallet +oints. Determination of withdrawal and head pull-through resistance
of pallet nails and staples
ISO 12777-3:2002
0ethods of test for pallet +oints. Determination of strength of pallet +oints
ISO 12789:2000
#eference neutron radiations. &haracteristics and methods of production of simulated workplace
neutron fields
ISO 12794:2000
?uclear energy. #adiation protection. !ndividual thermoluminescence dosemeters for e/tremities
and eyes
ISO 12819:1999
0ethods of evaluation of the lifetime of a $attery-powered watch
ISO 12864:1998
"phthalmic optics. &ontact lenses. Determination of scattered light
ISO 12865:1998
"phthalmic instruments. #etinoscopes
ISO 12866:1999
"phthalmic instruments. Perimeters
ISO 12867:1998
"phthalmic instruments. -rial frames
ISO 12870:1998
"phthalmic optics. Spectacle frames. General re=uirements and test methods
ISO 12894:2001
<rgonomics of the thermal environment. 0edical supervision of individuals e/posed to e/treme
hot or cold environments
DD ISO%&S 12902:2002
Solid mineral fuels. Determination of total car$on% hydrogen and nitrogen. !nstrumental methods
ISO 12917-1:2002
Petroleum and li=uid petroleum products. &ali$ration of hori.ontal cylindrical tanks. 0anual
methods
ISO 12917-2:2002
Petroleum and li=uid petroleum products. &ali$ration of hori.ontal cylindrical tanks. !nternal
electro-optical distance-ranging method
ISO 12922:2002
2u$ricants% industrial oils and related products (class 2). >amily 1 (hydraulic systems).
Specifications for categories 1>3<% 1>3S% 1>B% 1>&% 1>D# and 1>DD
ISO 12925-1:1996
2u$ricants% industrial oils and related products (class 2). >amily & (Gears). Specifications for
lu$ricants for enclosed gear systems
ISO%&S 12927:1999
2u$ricants% industrial oils and related products (class 2). >amily 0 (metalworking). Guidelines
for esta$lishing specifications
ISO%&S 12928:1999
2u$ricants% industrial oils and related products (class 2). >amily # (products for temporary
protection against corrosion). Guidelines for esta$lishing specifications
ISO 12937:2001
0ethods of test for petroleum and its products. @AAA-C',6Petroleum products. Determination of
content. &oulometric Garl >ischer titration method
ISO 12944-1:1998
Paints and varnishes. &orrosion protection of steel structures $y protective paint systems.
General introduction
ISO 12944-2:1998
Paints and varnishes. &orrosion protection of steel structures $y protective paint systems.
&lassification of environments
ISO 12944-3:1998
Paints and varnishes. &orrosion protection of steel structures $y protective paint systems. Design
considerations
ISO 12944-4:1998
Paints and varnishes. &orrosion protection of steel structures $y protective paint systems. -ypes
of surface and surface preparation
ISO 12944-5:1998
Paints and varnishes. &orrosion protection of steel structures $y protective paint systems.
Protective paint systems
ISO 12944-6:1998
Paints and varnishes. &orrosion protection of steel structures $y protective paint systems.
2a$oratory performance test methods
ISO 12944-7:1998
Paints and varnishes. &orrosion protection of steel structures $y protective paint systems.
</ecution and supervision of paintwork
ISO 12944-8:1998
Paints and varnishes. &orrosion protection of steel structures $y protective paint systems.
Development of specifications for new work and maintenance
ISO 12945-1:2001
-e/tiles. Determination of fa$ric propensity to surface fu..ing and to pilling. Pilling $o/ method
ISO 12945-2:2000
-e/tiles. Determination of fa$ric propensity to surface fu..ing and to pilling. 0odified
0artindale method
ISO 12947-1:1999
-e/tiles. Determination of the a$rasion resistance of fa$rics $y the 0artindale method.
0artindale a$rasion testing apparatus
ISO 12947-2:1999
-e/tiles. Determination of the a$rasion resistance of fa$rics $y the 0artindale method.
Determination of specimen $reakdown
ISO 12947-3:1999
-e/tiles. Determination of the a$rasion resistance of fa$rics $y the 0artindale method.
Determination of mass loss
ISO 12947-4:1999
-e/tiles. Determination of the a$rasion resistance of fa$rics $y the 0artindale method.
3ssessment of appearance change
ISO 12952-1:1999
-e/tiles. Burning $ehaviour of $edding items. General test methods for the ignita$ility $y a
smouldering cigarette
ISO 12952-2:1999
-e/tiles. Burning $ehaviour of $edding items. Specific test methods for the ignita$ility $y a
smouldering cigarette
ISO 12952-3:1999
-e/tiles. Burning $ehaviour of $edding items. General test methods for the ignita$ility $y a
small open flame
ISO 12952-4:1999
-e/tiles. Burning $ehaviour of $edding items. Specific test methods for the ignita$ility $y a
small open flame
ISO 12956:1999
Geote/tiles and geote/tile-related products. Determination of the characteristic opening si.e
ISO 12958:1999
Geote/tiles and geote/tile-related products. Determination of water flow capacity in their plane
ISO 12965:2000
Butadiene ru$$er. Determination of microstructure $y infra-red spectrometry
ISO 12992:1995
Plastics. 7ertical flame spread determination for film and sheet
ISO 13000-1:1998
Plastics. Polytetrafluoroethylene (P-><) semi-finished products. #e=uirements and designation
ISO 13000-2:1998
Plastics. Polytetrafluoroethylene (P-><) semi-finished products. Preparation of test specimens
and determination of properties
ISO 13002:1999
&ar$on fi$re. Designation system for filament yarns
ISO 13012:1998
#olling $earings% linear motion% recirculating $all% sleeve type. 3ccessories
ISO 13050:1999
&urvilinear toothed synchronous $elt drive systems
ISO 13090-1:1998
0echanical vi$ration and shock. Guidance on safety aspects of tests and e/periments with
people. </posure to whole-$ody mechanical vi$ration and repeated shock
ISO%IEC 13210:1999
!nformation technology. #e=uirements and guidelines for test methods specifications and test
method implementation for measuring conformance to P"S!8 standards
ISO%IEC 13211-1:1995
!nformation technology. Programming languages. Prolog. General core
ISO%IEC 13211-2:2000
!nformation technology. Programming languages. Prolog. 0odules
ISO 13212:1999
"phthalmic optics. &ontact lens care products. Guidelines for the determination of shelf-life
ISO%IEC 13213:1994
!nformation technology. 0icroprocessor systems. &ontrol and Status #egisters (&S#)
3rchitecture for microcomputer $uses
ISO 13215-2:1999
#oad vehicles. #eduction of misuse risk of child restraint systems. #e=uirements and test
procedures for correct installation (panel method)
ISO 13215-3:1999
#oad vehicles. #eduction of misuse risk of child restraint systems. Prediction and assessment of
misuse $y misuse mode and effect analysis (00<3)
ISO 13216-1:1999
#oad vehicles. 3nchorages in vehicles and attachments to anchorages for child restraint systems.
Seat $ight anchorages and attachments
ISO 13218:1998
#oad vehicles. &hild restraint systems. #eport form for accidents involving child passengers
ISO 13226:1999
#u$$er. Standard reference elastomers (S#<Ks) for characteri.ing the effect of li=uids on
vulcani.ed ru$$ers
ISO 13230:1999
"phthalmic optics. Bar code specifications
ISO%IEC &' 13233:1995
!nformation technology. !nterpretation of accreditation re=uirements in !S"!<& Guide @(.
3ccreditation of information technology and telecommunications testing la$oratories for
software and protocol testing services
ISO%IEC 13235-1:1998
!nformation technology. "pen distri$uted processing. -rading function. Specification
ISO%IEC 13235-3:1998
!nformation technology. "pen distri$uted processing. -rading function. Provision of trading
function using "S! Directory service
ISO%IEC 13236:1998
!nformation technology. 9uality of service6>ramework
ISO%IEC 13238-3:1998
!nformation technology. Data management. !#DS e/portimport facility
ISO%IEC 13241:1997
!nformation technology. -elecommunications and information e/change $etween systems.
Private integrated services network. !nter-e/change signalling protocol. #oute restriction class
additional network feature
ISO%IEC 13242:1997
!nformation technology. -elecommunications and information e/change $etween systems.
Private integrated services network. Specification% functional model and information flows.
#oute restriction class additional network feature
ISO%IEC &' 13243:1999
!nformation technology. 9uality of service. Guide to methods and mechanisms
ISO%IEC 13246:1997
!nformation technology. -elecommunications and information e/change $etween systems.
Broad$and private integrated services network. !nter-e/change signalling protocol. Signalling
3-0 adaptation layer
ISO%IEC 13247:1997
!nformation technology. -elecommunications and information e/change $etween systems.
Broad$and private integrated services network. !nter-e/change signalling protocol. Basic
callconnection control
ISO%IEC 13248-1:1998
!nformation technology. "pen systems interconnection. -he directory. Protocol implementation
conformance statement (P!&S) proforma for the directory access protocol
ISO%IEC 13248-3:1998
!nformation technology. "pen systems interconnection. -he directory. Protocol implementation
conformance statement (P!&S) proforma for the directory operational $inding management
protocol
ISO%IEC 13248-4:1998
!nformation technology. "pen systems interconnection. -he directory. Protocol implementation
conformance statement (P!&S) proforma for the directory information shadowing protocol
ISO%IEC 13249-1:2002
!nformation technology. Data$ase languages. S92 multimedia and application packages.
>ramework
ISO%IEC 13249-2:2000
!nformation technology. Data$ase languages. S92 multimedia and application packages. >ull-
te/t
ISO%IEC 13249-3:1999
!nformation technology. Data$ase languages. S92 multimedia and application packages. Spatial
ISO%IEC 13249-5:2001
!nformation technology. Data$ase languages. S92 multimedia and application packages. Still
image
ISO%IEC 13249-6:2002
!nformation technology. Data$ase languages. S92 multimedia and application packages. Data
mining
ISO%IEC 13250:2000
!nformation technology. SG02 applications. -opic maps
ISO 13284:2003
>ork-lift trucks. >ork-arm e/tensions and telescopic fork arms. -echnical characteristics and
strength re=uirements
ISO 13294:1997
Dental handpieces. Dental air-motors
ISO 13295:1997
Dental rotary instruments. 0andrels
ISO 13296:1997
Diesel engines. 1igh pressure fuel in+ection pipe assem$lies. General re=uirements and
dimensions
ISO 13297:2001
Small craft. <lectrical systems. 3lternating current installations
ISO 13299:2003
Sensory analysis. 0ethodology. General guidance for esta$lishing a sensory profile
ISO 13302:2003
Sensory analysis. 0ethods for assessing modifications to the flavour of foodstuffs due to
packaging
ISO 13310:1997
!ron ores. Determination of .inc content. >lame atomic a$sorption spectrometric method
ISO 13311:1997
!ron ores. Determination of lead content. >lame atomic a$sorption spectrometric method
ISO 13312:1997
!ron ores. Determination of potassium content. >lame atomic a$sorption spectrometric method
ISO 13313:1997
!ron ores. Determination of sodium content. >lame atomic a$sorption spectrometric method
ISO 13317-1:2001
Determination of particle si.e distri$ution $y gravitational li=uid sedimentation methods.
General principles and guidelines
ISO 13317-2:2001
Determination of particle si.e distri$ution $y gravitational li=uid sedimentation methods. >i/ed
pipette method
ISO 13317-3:2001
Determination of particle si.e distri$ution $y gravitational li=uid sedimentation methods. 8-ray
gravitational techni=ue
ISO 13318-1:2001
Determination of particle si.e distri$ution $y centrifugal li=uid sedimentation methods. General
principles and guidelines
ISO 13318-2:2001
Determination of particle si.e distri$ution $y centrifugal li=uid sedimentation methods.
Photocentrifuge method
ISO 13319:2000
Determination of particle si.e distri$utions. <lectrical sensing .one method
ISO 13320-1:1999
Particle si.e analysis. 2aser diffraction methods. General principles
ISO 13323-1:2000
Determination of particle si.e distri$ution. Single-particle light interaction methods. 2ight
interaction considerations
ISO 13332:2000
#eciprocating internal com$ustion engines. -est code for the measurement of structure-$orne
noise emitted from high-speed and medium-speed reciprocating internal com$ustion engines
measured at the engine feet
ISO%IEC &' 13335-1:1996
!nformation technology. Guidelines for the management of !- security. &oncepts and models for
!- Security
ISO%IEC &' 13335-2:1997
!nformation technology. Guidelines for the management of !- security. 0anaging and planning
!- Security
ISO%IEC &' 13335-3:1998
!nformation technology. Guidelines for the management of !- security. -echni=ues for the
management of !- security
ISO%IEC &' 13335-5:2001
!nformation technology. Guidelines for the management of !- security. 0anagement guidance of
network security
ISO 13337:1998
Spring-type straight pins. Slotted% light duty
ISO 13340:2001
-ransporta$le gas cylinders. &ylinder valves for non-refilla$le cylinders. Specification and
prototype testing
ISO 13341:1998
-ransporta$le gas cylinders. >itting of valves to gas cylinders
ISO 13344:1996
Determination of the lethal to/ic potency of fire effluents
ISO 13355:2001
Packaging. &omplete% filled transport packages and unit loads. 7ertical random vi$ration test
ISO 13357-1:2002
Petroleum products. Determination of the filtera$ility of lu$ricating oils. Procedure for oils in the
presence of water
ISO 13359:1998
0easurement of conductive li=uid flow in closed conduits. >langed electromagnetic flowmeters.
"verall length
ISO 13362:2000
>le/i$le cellular polymeric materials. Determination of compression set under humid conditions
ISO 13366-1:1997
0ilk. <numeration of somatic cells. 0icroscopic method
ISO 13366-2:1997
0ilk. <numeration of somatic cells. 0ethod using an electronic particle counter
ISO 13366-3:1997
0ilk. <numeration of somatic cells. >luoro-opto-electronic method
ISO 13370:1998
-hermal performance of $uildings. 1eat transfer via the ground. &alculation methods
ISO 13373-1:2002
&ondition monitoring and diagnostics of machines. 7i$ration condition monitoring. General
procedures
ISO 13374-1:2003
&ondition monitoring and diagnostics of machines. Data processing% communication and
presentation. General guidelines
ISO%&' 13387-1:1999
>ire safety engineering. 3pplication of fire performance concepts to design o$+ectives
ISO%&' 13387-2:1999
>ire safety engineering. Design fire scenarios and design fires
ISO%&' 13387-3:1999
>ire safety engineering. 3ssessment and verification of mathematical fire models
ISO%&' 13387-4:1999
>ire safety engineering. !nitiation and development of fire and generation of fire effluents
ISO%&' 13387-5:1999
>ire safety engineering. 0ovement of fire effluents
ISO%&' 13387-6:1999
>ire safety engineering. Structural response and fire spread $eyond the enclosure of origin
ISO%&' 13387-7:1999
>ire safety engineering. Detection% activation and suppression
ISO%&' 13387-8:1999
>ire safety engineering. 2ife safety. "ccupant $ehaviour% location and condition
ISO 13395:1996
;ater =uality. Determination of nitrite nitrogen and nitrate nitrogen and the sum of $oth $y flow
analysis (&>3 and >!3) and spectrometric detection
ISO 13397-1:1996
Periodontal curettes% dental scalers and e/cavators. General re=uirements
ISO 13397-2:1997
Periodontal curettes% dental scalers and e/cavators. Periodontal curettes. Gr-type
ISO 13397-3:1997
Periodontal curettes% dental scalers and e/cavators. Dental scalers. 1-type
ISO 13397-4:1998
Periodontal curettes% dental scalers and e/cavators. Dental e/cavators. Discoid type
ISO 13402:2001
Surgical and dental hand instruments. Determination of resistance against autoclaving% corrosion
and thermal e/posure
ISO 13405-1:1996
Prosthetics and orthotics. &lassification and description of prosthetic components. &lassification
of prosthetic components
ISO 13405-2:1996
Prosthetics and orthotics. &lassification and description of prosthetic components. Description of
lower-lim$ prosthetic components
ISO 13405-3:1996
Prosthetics and orthotics. &lassification and description of prosthetic components. Description of
upper-lim$ prosthetic components
ISO 13406-1:1999
<rgonomic re=uirements for work with visual display $ased on flat panels. !ntroduction
ISO 13406-2:2002
<rgonomic re=uirements for work with visual display $ased on flat panels. <rgonomic
re=uirements for flat panel displays
ISO 13407:1999
1uman-centred design processes for interactive systems
ISO 13419:2003
Space data and information transfer systems. Packet telemetry
ISO%IEC 13421:1993
!nformation technology. Data interchange on )@%: mm% C,-track magnetic tape cartridges. D2- )
format
ISO%IEC 13422:1994
!nformation technology. Data interchange on EA mm fle/i$le disk cartridges )A 0Byte capacity
using sector servo tracking. !S" type 'AC
ISO 13426-1:2003
Geote/tiles and geote/tile-related products. Strength of internal structural +unctions. Geocells
ISO 13427:1998
Geote/tiles and geote/tile-related products. 3$rasion damage simulation (sliding $lock test).
ISO 13431:1999
Geote/tiles and geote/tiles-related products. Determination of tensile creep and creep rupture
$ehaviour
ISO 13437:1998
Geote/tiles and geote/tile-related products. 0ethod for installing and e/tracting samples in soil%
and testing specimens in la$oratory
DD E!+ ISO 13438:2000
Geote/tiles and geote/tile-related products. Screening test method for determining the resistance
to o/idation
ISO 13443:1996
?atural gas. Standard reference conditions
ISO 13450:1996
Photography. ))A-si.e cartridge% film and $acking paper. Dimensions
ISO 13463:1999
?uclear-grade plutonium dio/ide powder for fa$rication of light water reactor 0"8 fuel.
Guidelines to help in the definition of a product specification
ISO 13468-1:1997
Plastics. Determination of the total luminous transmittance of transparent materials. Single-$eam
instrument
ISO 13468-2:1999
Plastics. Determination of the total luminous transmittance of transparent materials. Dou$le-
$eam instrument
ISO 13472-1:2002
3coustics. 0easurement of sound a$sorption properties of road surfaces B:!in situB:#. </tended
surface method
ISO 13473-2:2002
&haracteri.ation of pavement te/ture $y use of surface profiles. -erminology and $asic
re=uirements related to pavement te/ture profile analysis
ISO 13473-3:2002
&haracteri.ation of pavement te/ture $y use of surface profiles. Specification and classification
of profilometers
DD ISO%&S 13474:2003
3coustics. !mpulse sound propagation for environmental noise assessment
ISO 13475-1:1999
3coustics. Stationary audi$le warning devices used outdoors. >ield measurements for
determination of sound emission =uantities
ISO 13476:1997
#oad vehicles. !gnition coils. <lectrical characteristics and test methods
ISO 13478:1997
-hermoplastics pipes for the conveyance of fluids. Determination of resistance to rapid crack
propagation (#&P). >ull-scale test
ISO 13479:1997
Polyolefin pipes for the conveyance of fluids. Determination of resistance to crack propagation.
-est method for slow crack growth on notched pipes (notch test)
ISO%IEC 13481:1993
!nformation technology. Data interchange on )'A mm optical disk cartridges. &apacity6 )
giga$yte per cartridge
ISO 13485:2001
9uality systems. 0edical devices. Particular re=uirements for the application of <? !S" EAA)
ISO 13485:2003
0edical devices. 9uality management systems. #e=uirements for regulatory purposes
ISO 13486-1:1999
#oad vehicles. 1ydraulic $raking systems. Dou$le-flare pipes% tapped holes% male fittings and
tu$e seats
ISO 13488:2001
9uality systems. 0edical devices. Particular re=uirements for the application of <? !S" EAA@
ISO 13491-1:1998
Banking. Secure cryptographic devices (retail). &oncepts% re=uirements and evaluation methods
ISO 13491-2:2000
Banking. Secure cryptographic devices (retail). Security compliance checklists for devices used
in magnetic stripe cards systems
ISO 13492:1998
Banking. Gey management related data element (retail)
ISO 13500:1999
Petroleum and natural gas industries. Drilling fluid materials. Specifications and tests
ISO 13503-1:2003
Petroleum and natural gas industries. &ompletion fluids and materials. 0easurement of viscous
properties of completion fluids
ISO%IEC 13522-1:1997
!nformation technology. &oding of multimedia and hypermedia information. 01<G o$+ect
representation. Base notation (3S?.))
ISO%IEC 13522-3:1997
!nformation technology. &oding of multimedia and hypermedia information. 01<G script
interchange representation
ISO%IEC 13522-4:1996
!nformation technology. &oding of multimedia and hypermedia information. 01<G registration
procedure
ISO%IEC 13522-5:1997
!nformation technology. &oding of multimedia and hypermedia information. Support for $ase-
level interactive applications
ISO%IEC 13522-6:1998
!nformation technology. &oding of multimedia and hypermedia information. Support for
enhanced interactive applications
ISO%IEC 13522-7:2001
!nformation technology. &oding of multimedia and hypermedia information. !nteropera$ility and
conformance testing for !S"!<& )'(@@-(
ISO%IEC 13522-8:2001
!nformation technology. &oding of multimedia and hypermedia information. 802 notation for
!S"!<& )'(@@-(
DD E!+ ISO 13530:1999
;ater =uality. Guide to analytical =uality control for water analysis
ISO 13533:2002
Petroleum and natural gas industries. Drilling and production e=uipment. Drill-through
e=uipment
ISO 13534:2001
Petroleum and natural gas industries. Drilling and production e=uipment. !nspection%
maintenance% repair and re-manufacture of hoisting e=uipment
ISO 13535:2001
Petroleum and natural gas industries. Drilling and production e=uipment. 1oisting e=uipment
ISO 13542:1995
Paper and $oard. Specification for internal diameters of cores for reels
ISO%IEC 13549:1993
!nformation technology. Data interchange on )'A mm optical disk cartridges. &apacity6 )%'
giga$ytes per cartridge
ISO 13555-1:2003
Diesel engines. Procedure for checking the dynamic timing of diesel fuel in+ection e=uipment.
Preconditioning
ISO 13555-2:2003
Diesel engines. Procedure for checking the dynamic timing of diesel fuel in+ection e=uipment.
-est method
ISO 13556:1998
#oad vehicles. 2ocali.ation of e/haust system leaks and e=uipment specifications
ISO%IEC &' 13561:1994
!nformation technology. Guidelines for effective use of optical disk cartridges conforming to
!S"!<& )AAEA
ISO 13562-1:2000
!ndustrial varia$le-reach trucks. Sta$ility tests
ISO 13562-2:2001
!ndustrial varia$le-reach trucks. 3dditional sta$ility tests for trucks handling freight containers of
length *m and a$ove
ISO 13563-1:2001
Single side loading fork-lift trucks. Sta$lity tests
ISO 13565-1:1998
Geometric Product Specifications (GPS). Surface te/ture6 Profile method. Surfaces having
stratified functional properties. >iltering and general measurement conditions
ISO 13565-2:1998
Geometric Product Specifications (GPS). Surface te/ture6 Profile method. Surfaces having
stratified functional properties. 1eight characteri.ation using the linear material ration curve
ISO 13565-3:2000
Geometric Product Specifications (GPS). Surface te/ture6 Profile method. Surfaces having
stratified functional properties. 1eight characteri.ation using the material pro$a$ility curve
ISO 13567-1:2002
-echnical product documentation. "rgani.ation and naming of layers for &3D. "verview and
principles
ISO 13567-2:2002
-echnical product documentation. "rgani.ation and naming of layers for &3D. &oncepts% format
and codes used in construction documentation
ISO%IEC 13568:2002
!nformation technology. 4 formal specification notation. Synta/% type system and semantics
ISO%IEC 13575:1995
!nformation technology. -elecommunications and information e/change $etween systems. (A-
pole interface connector matea$ility dimensions and contact num$er assignments
ISO 13583-1:2000
&entrifugally cast steel and alloy products. General testing and tolerances
ISO 13584-20:1998
!ndustrial automation systems and integration. Parts li$rary. 2ogical resource. 2ogical model of
e/pressions
ISO 13584-42:1998
!ndustrial automation systems and integration. Parts li$rary. Description methodology6
0ethodology for structuring part families
ISO 13586:2000
Plastics. Determination of fracture toughness (BiGBdiBdc and BiGBdiBdc). 2inear elastic fracture
mechanics (2<>0) approach
ISO 13591:1997
Small craft. Porta$le fuel systems for out$oard motors
ISO 13592:1998
Small craft. Backfire flame control for petrol engines
ISO 13616:1997
Banking and related financial services. !nternational $ank account num$er (!B3?)
ISO 13617:2001
Ships and marine technology. Ship$oard incinerators. #e=uirements
ISO 13625:2002
Petroleum and natural gas industries. Drilling and production e=uipment. 0arine drilling riser
couplings
ISO 13628-1:1999
Petroleum and natural gas industries. Design and operation of su$sea production systems.
General re=uirements and recommendations
ISO 13628-2:2001
Petroleum and natural gas industries. Design and operation of su$sea production systems.
>le/i$le pipe systems for su$sea and marine applications
ISO 13628-3:2001
Petroleum and natural gas industries. Design and operation of su$sea production systems.
-hrough flowline (->2) systems
ISO 13628-4:1999
Petroleum and natural gas industries. Design and operation of su$sea production systems. Su$sea
wellhead and tree e=uipment
ISO 13628-5:2002
Petroleum and natural gas industries. Design and operation of su$sea production systems. Su$sea
um$ilicals
ISO 13628-6:2000
Petroleum and natural gas industries. Design and operation of su$sea production systems. Design
and operation of su$sea controls
ISO 13628-8:2002
Petroleum and natural gas industries. Design and operation of su$sea production systems.
#emotely operated vehicle (#"7) interfaces on su$sea production systems
ISO 13628-9:2000
Petroleum and natural gas industries. Design and operation of su$sea production systems.
#emotely operated tool (#"-) intervention systems
ISO 13631:2002
Petroleum and natural gas industries. Packaged reciprocating gas compressors
ISO 13640:1999
Building construction. 5ointing products. Specifications for test su$strates
ISO%IEC 13642:1996
!nformation technology. <lements of management information related to the "S! Physical 2ayer
ISO%IEC 13650-2:1997
!nformation technology. "pen systems interconnection. &onformance test suite for the "S! -P
protocol. -est management protocol specification
ISO 13651:1996
Plastics. <po/y resins and related materials. Determination of total saponifia$le chlorine
ISO 13653:1996
"ptics and optical instruments. General optical test methods. 0easurement of relative irradiance
in the image field
ISO 13655:1996
Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
ISO 13656:2000
Graphic technology. 3pplication of reflection densitometry and colorimetry to process control or
evaluation of prints and proofs
ISO 13666:1999
"phthalmic optics. Spectacle lenses. 7oca$ulary
ISO 13674-1:2003
#oad vehicles. -est method for the =uantification of on-centre handling. ;eave test
ISO 13678:2000
Petroleum and natural gas industries. <valuation and testing of thread compounds for use with
casing% tu$ing and line pipe
ISO 13679:2002
Petroleum and natural gas industries. Procedures for testing casing and tu$ing connections
ISO 13680:2002
Petroleum and natural gas industries. &orrosion-resistant alloy seamless tu$es for use as casing%
tu$ing and coupling stock. -echnical delivery conditions
ISO 13689:2001
#efrigerated light hydrocar$on fluids. 0easurement of li=uid levels in tanks containing li=uefied
gases. 0icrowave-type level gauge
ISO 13690:1999
&ereals% pulses and milled products. Sampling of static $atches
ISO 13691:2002
Petroleum and natural gas industries. 1igh-speed special-purpose gear units
ISO 13694:2001
"ptics and optical instruments. 2asers and laser-related e=uipment. -est methods for laser $eam
power (energy) density distri$ution
ISO 13696:2002
"ptics and optical instruments. -est methods for radiation scattered $y optical components
ISO 13702:1999
Petroleum and natural gas industries. &ontrol and mitigation of fires and e/plosions on offshore
production installations. #e=uirements and guidelines
ISO 13703:2001
Petroleum and natural gas industries. Design and installation of piping systems on offshore
production platforms
ISO 13704:2001
Petroleum and natural gas industries. &alculation of heater-tu$e thickness in petroleum refineries
ISO 13705:2002
Petroleum and natural gas industries. >ired heaters for general refinery service
ISO 13706:2000
Petroleum and natural gas industries. 3ir cooled heat e/changers
ISO%IEC 13714:1995
!nformation technology. Document processing and related communication. Dser interface to
telephone-$ased services. 7oice messaging applications
ISO 13716:2000
Dentistry. #eversi$le-irreversi$le hydrocolloid impression material systems
ISO%&S 13725:2001
1ydraulic fluid power. &ylinders. 0ethod for determining the $uckling load
ISO 13726:1998
1ydraulic fluid power. Single rod cylinders% )* 0Pa ()*A $ar) compact series with $ores from
@(A mm to (AA mm. 3ccessory mounting dimensions
ISO 13731:2002
<rgonomics of the thermal environment. 7oca$ulary and sym$ols
ISO 13734:2001
?atural gas. "rganic sulfur compounds used as odorants. #e=uirements and test methods
ISO 13736:1998
Petroleum products and other li=uids. Determination of flash point. 3$el closed cup method
ISO 13738:2000
2u$ricants% industrial oils and related products (class 2). >amily < (internal com$ustion engine
oils). Specifications for two-stroke-cycle gasoline engine oils (categories <GB% <G& and <GD)
ISO%&' 13739:1998
Petroleum products. 0ethods of specifying practical procedures for the transfer of $unker fuels
to ships
ISO 13740:1998
&rude petroleum and petroleum products. -ransfer accounta$ility. 3ssessment of vessel
e/perience factor on loading (7<>2) and vessel e/perience factor on discharging (7<>D) of
ocean-going tanker vessels
ISO 13741-1:1998
Plasticsru$$er. Polymer dispersions and ru$$er latices (natural and synthetic). Determination of
residual monomers and other organic components $y capillary-column gas chromatography.
Direct li=uid in+ection method
ISO 13741-2:1998
Plasticsru$$er. Polymer dispersions and ru$$er latices (natural and synthetic). Determination of
residual monomers and other organic components $y capillary-column gas chromatography.
1eadspace method
ISO 13746:2000
-e/tile floor coverings. Guidelines for installation and use on stairs
ISO%IEC 13751:2001
!nformation technology. Programming languages% their environments and system software
interfaces. Programming language </tended 3P2
ISO 13752:1998
3ir =uality. 3ssessment of uncertainty of a measurement method under field conditions using a
second method as reference
ISO 13753:1999
0echanical vi$ration and shock. 1and-arm vi$ration. 0ethod for measuring the vi$ration
transmissi$ility of resilient materials when loaded $y the hand-arm system
ISO 13756:1997
Determination of silver in silver +ewellery alloys. 7olumetric (potentiometric) method using
sodium chloride or potassium chloride
ISO 13757:1996
0ethods of test for petroleum and its products. 2i=uefied petroleum gases. Determination of oily
residues. 1igh temperature method
ISO 13758:1997
0ethods of test for petroleum and its products. 2i=uefied petroleum gases. 3ssessment of the
dryness of propane. 7alve free.e method
ISO 13759:1997
0ethods of test for petroleum and its products. Petroleum products. Determination of alkyl
nitrate in diesel fuels. Spectrometric method
ISO 13760:2000
Plastics pipes for the conveyance of fluids under pressure. 0inerKs rule. &alculation method for
cumulative damage
DD ISO%&S 13762:2001
Particle si.e analysis. Small angle 8-ray scattering method
ISO 13769:2002
Gas cylinders. Stamp marking
ISO 13772:1997
>orestry machinery. Porta$le chainsaws. ?on-manually actuated chain $rake performance
ISO 13774:1998
#u$$er and plastics hoses for fuels for internal com$ustion engines. 0ethod of test for
flamma$ility
ISO 13775-1:2000
-hermoplastic tu$ing and hoses for automotive use. ?on-fuel applications
ISO 13775-2:2000
-hermoplastic tu$ing and hoses for automotive use. Petroleum-$ased fuel applications
ISO 13778:1999
Plain $earings. 9uality assurance of thin-walled half $earings. Selective assem$ly of $earings to
achieve a narrow clearance range
ISO 13779-1:2000
!mpants for surgery. 1ydro/yapatite. &eramic hydro/yapatite
ISO 13779-2:2000
!mpants for surgery. 1ydro/yapatite. &oatings of hydro/yapatite
ISO 13779-4:2002
!mplants for surgery. 1ydro/yapatite. Determination of coating adhesion strength
ISO 13783:1998
Plastics piping systems. Dnplastici.ed poly(vinyl chloride) (P7&-D) end-load-$earing dou$le-
socket +oints. -est method for leaktightness and strength while su$+ected to $ending and internal
pressure
ISO 13786:1999
-hermal performance of $uilding components. Dynamic thermal characteristics. &alculation
methods
ISO 13787:2003
-hermal insulation products for $uilding e=uipment and industrial installations. Determination of
declared thermal conductivity
ISO 13788:2002
1ygrothermal performance of $uilding components and $uilding elements. !nternal surface
temperature to avoid critical surface humidity and interstitial condensation. &alculation methods
ISO 13789:1999
-hermal performance of $uildings. -ransmission heat loss coefficient. &alculation method
ISO 13793:2001
-hermal performance of $uildings. -hermal design of foundations to avoid frost heave
ISO 13794:1999
3m$ient air. Determination of as$estos fi$res. !ndirect-transfer transmission electron microscopy
method
ISO 13802:1999
Plastics. 7erification of pendulum impact-testing machines. &harpy% !.od and tensile impact-
testing
ISO 13804:1999
7itreous and porcelain enamels for aluminium. Production of specimens for testing
ISO 13805:1999
7itreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on
aluminium under the action of electrolytic solution (spall test)
ISO 13806:1999
7itreous and porcelain enamels. &orrosion tests in closed systems
ISO 13807:1999
7itreous and porcelain enamels. Determination of crack formation temperature in the thermal
shock testing of enamels for the chemical industry
ISO%IEC 13813:1997
!nformation technology. Programming languages. Generic packages of real and comple/ type
declarations and $asic operations for 3da (including vector and matri/ types)
ISO%IEC 13814:1998
!nformation technology. Programming languages. Generic package of comple/ elementary
functions for 3da
ISO%IEC 13816:1997
!nformation technology. Programming languages% their environments and system software
interfaces. Programming language !S2!SP
ISO%IEC 13817-1:1996
!nformation technology. Programming languages% their environments and system software
interfaces. 7ienna Development 0ethod. Specification language. Base language
ISO%IEC 13818-1:1997
!nformation technology. Generic coding of moving pictures and associated audio information.
Systems
ISO%IEC 13818-3:1996
!nformation technology. Generic coding of moving pictures and associated audio information.
3udio
ISO%IEC &' 13818-5:1997
!nformation technology. Generic coding of moving pictures and associated audio information.
Software simulation
ISO%IEC 13818-9:2001
!nformation technology. Generic coding of moving pictures and associated audio information.
</tension for real time interface for systems decoders
ISO 13820:1996
Paper% $oard and corrugated fi$re$oard. Description and cali$ration of compression testing
e=uipment
ISO 13821:2001
&orrugated fi$re$oard. Determination of edgewise crush resistance. ;a/ed edge method
DD E!+ ISO%&' 13843:2001
;ater =uality. Guidance on validation of micro$iological methods
ISO 13844:2000
Plastics piping systems. <lastomeric-sealing-ring-type socket +oints of unplastici.ed poly(vinyl
chloride) (P7&-D) for use with P7&-D pipes. -est method for leaktightness under negative
pressure
ISO 13845:2000
Plastics piping systems. <lastomeric-sealing-ring-type socket +oints for use with unplastici.ed
poly(vinyl chloride) (P7&-D) pipes. -est method for leaktightness under internal pressure and
with angular deflection
ISO 13846:2001
Plastics piping systems. <nd-load-$earing and non-end-load $earing assem$lies and +oints for
thermoplastics pressure piping. -est method for long-term leaktightness under internal water
pressure
ISO 13849-2:2003
Safety of machinery. Safety-related parts of control systems. 7alidation
ISO%IEC 13863:1998
!nformation technology. -elecommunications and information e/change $etween systems.
Private integrated services network. Specification% functional model and information flows. Path
replacement additional network feature
ISO%IEC 13865:1995
!nformation technology. -elecommunications and information e/change $etween systems.
Private !ntegrated Services ?etwork. Specification% functional model and information flows. &all
transfer supplementary service
ISO%IEC 13871:1995
!nformation technology. -elecommunications and information e/change $etween systems.
Private telecommunications networks. Digital channel aggregation
ISO%IEC 13874:1999
!nformation technology. -elecommunications and information e/change $etween systems.
Private integrated services network. !nter-e/change signalling protocol. Path replacement
additional network feature
ISO 13879:1999
Petroleum and natural gas industries. &ontent and drafting of functional specifications
ISO 13880:1999
Petroleum and natural gas industries. &ontent and drafting of a technical specification
ISO 13884:2003
3nimal and vegeta$le fats and oils. Determination of isolated trans isomers $y infrared
spectrometry
ISO%IEC 13886:1996
!nformation technology. 2anguage independent procedure calling (2!P&)
ISO%IEC 13888-1:1997
!nformation technology. Security techni=ues. ?on-repudiation. General
ISO%IEC 13888-2:1998
!nformation technology. Security techni=ues. ?on-repudiation. 0echanisms using symmetric
techni=ues
ISO%IEC 13888-3:1997
!nformation technology. Security techni=ues. ?on-repudiation. 0echanisms using asymmetric
techni=ues
ISO 13894-1:2000
1igh-pressure decorative laminates. &omposite elements. -est methods
ISO 13900:2002
Steel. Determination of $oron content. &urcumin spectrophotometric method after distillation
ISO 13909-1:2001
1ard coal and coke. 0echanical sampling. General introduction
ISO 13909-2:2001
1ard coal and coke. 0echanical sampling. Sampling from moving streams
ISO 13909-3:2001
1ard coal and coke. 0echanical sampling. &oal. Sampling from stationary lots
ISO 13909-4:2001
1ard coal and coke. 0echanical sampling. &oal. Preparation of test samples
ISO 13909-5:2001
1ard coal and coke. 0echanical sampling. Sampling from moving streams
ISO 13909-6:2001
1ard coal and coke. 0echanical sampling. &oke. Preparation of test samples
ISO 13909-7:2001
1ard coal and coke. 0echanical sampling. 0ethods for determining the precision of sampling%
sample preparation and testing
ISO 13909-8:2001
1ard coal and coke. 0echanical sampling. 0ethods of testing for $ias
ISO 13916:1997
;elding. Guidance on the measurement of preheating temperature% interpass temperature and
preheat maintenance temperature
ISO 13918:1998
;elding. Studs and ceramic ferrules for arc stud welding
ISO 13919-1:1997
;elding. <lectron and laser $eam welded +oints. Guidance on =uality levels for imperfections.
Steel
ISO 13919-2:2001
;elding. <lectron and laser $eam welded +oints. Guidance on =uality levels for imperfections.
3luminium and its welda$le alloys
ISO 13920:1997
;elding. General tolerances for welded constructions. Dimensions for lengths and angles. Shape
and position
ISO%IEC 13923:1996
!nformation technology. '%,) mm wide magnetic tape cartridge for information interchange.
1elical scan recording. DDS-@ format using )@A m length tape
ISO 13927:2003
Plastics. Simple heat release test using a conical radiant heater and a thermopile detector
ISO &' 13928:1994
3pplication guide for !S" )A:((% !S" )A:(*% !S" )A:(:% !S" )A:(, and !S" )A:(E
ISO 13929:2001
Small craft. Steering gear. Geared link systems
ISO 13934-1:1999
-e/tiles. -ensile properties of fa$rics. Determination of ma/imum force and elongation at
ma/imum force using the strip method
ISO 13934-2:1999
-e/tiles. -ensile properties of fa$rics. Determination of ma/imum force using the gra$ method
ISO 13935-1:1999
-e/tiles. Seam tensile properties of fa$rics and made-up te/tile articles. Determination of
ma/imum force to seam rupture using the strip method
ISO 13935-2:1999
-e/tiles. Seam tensile properties of fa$rics and made-up te/tile articles. Determination of
ma/imum force to seam rupture using the gra$ method
ISO 13937-1:2000
-e/tiles. -ear properties of fa$rics. Determination of tear force using $allistic pendulum method
(<lmendorf)
ISO 13937-2:2000
-e/tiles. -ear properties of fa$rics. Determination of tear force of trouser-shaped test specimens
(single tear method)
ISO 13937-3:2000
-e/tiles. -ear properties of fa$rics. Determination of tear force of wing-shaped test specimens
(single tear method)
ISO 13937-4:2000
-e/tiles. -ear properties of fa$rics. Determination of tear force of tongue-shaped test specimens
(dou$le tear test)
ISO 13938-1:1999
-e/tiles. Bursting properties of fa$rics. 1ydraulic method for determination of $ursting strength
and $ursting distension
ISO 13938-2:1999
-e/tiles. Bursting properties of fa$rics. Pneumatic method for determination of $ursting strength
and $ursting distension
ISO 13942:2000
Bonded a$rasive products. 2imit deviations and run-out tolerances
ISO 13943:2000
>ire safety. 7oca$ulary
ISO 13953:2001
Polyethelene (P<) pipes and fittings. Determination of the tensile strength and failure mode of
test pieces from a $utt-fused +oint
ISO%IEC 13962:1995
!nformation technology. Data interchange on )@%: mm% ))@-track magnetic tape cartridges. D2-
@ format
ISO%IEC 13963:1995
!nformation technology. Data interchange on EA mm optical disk cartridges. &apacity6 @'A
mega$ytes per cartridge
ISO 13964:1998
3ir =uality. Determination of o.one in am$ient air. Dltraviolet photometric method
ISO%&' 13989-1:2000
&alculation of scuffing load capacity of cylindrical% $evel and hypoid gears. >lash temperature
method
ISO%&' 13989-2:2000
&alculation of scuffing load capacity of cylindrical% $evel and hypoid gears. !ntegral temperature
method
ISO 13994:1998
&lothing for protection against li=uid chemicals. Determination of the resistance of protective
clothing materials to penetration $y li=uids under pressure
ISO 13995:2001
Protective clothing. 0echanical properties. -est method for the determination of the resistance to
puncture and dynamic tearing of materials
ISO 13997:1999
Protective clothing. 0echanical properties. Determination of resistance to cutting $y sharp
o$+ects
ISO 13998:2003
Protective clothing. 3prons% trousers and vests protecting against cuts and sta$y hand knives
ISO 14001:1996
<nvironmental management systems. Specification with guidance for use
ISO 14004:1996
<nvironmental management systems. General guidelines on principles% systems and supporting
techni=ues
ISO 14015:2001
<nvironmental management. <nvironmental assessment of sites and organi.ations (<3S")
ISO 14020:2001
<nvironmental la$els and declarations. General principles
ISO 14021:2001
<nvironmental la$els and declarations. Self-declared environmental claims (-ype !!
environmental la$elling)
ISO 14024:2001
<nvironmental la$els and declarations. -ype ! environmental la$elling. Principles and
procedures
ISO 14031:2000
<nvironmental management. <nvironmental performance evaluation. Guidelines
ISO 14040:1997
<nvironmental management. 2ife cycle assessment. Principles and framework
ISO 14041:1998
<nvironmental management. 2ife cycle assessment. Goal and scope definition and inventory
analysis
ISO 14042:2000
<nvironmental management. 2ife cycle management. 2ife cycle impact assessment
ISO 14043:2000
<nvironmental management. 2ife cycle assessment. 2ife cycle interpretation
DD ISO%&S 14048:2002
<nvironmental management. 2ife cycle assessment. Data documentation format
ISO 14050:2002
<nvironmental management. 7oca$ulary
ISO 14111:1999
?atural gas. Guidelines to tracea$ility in analysis
ISO 14113:1997
Gas welding e=uipment. #u$$er and plastic hoses assem$led for compressed or li=uefied gases
up to a ma/imum design pressure of C(A $ar
ISO 14114:1999
Gas welding e=uipment. 3cetylene manifold systems for welding% cutting and allied processes.
General re=uirements
ISO 14122-1:2001
Safety of machinery. Permanent means of access to machinery. &hoice of a fi/ed means of
access $etween two levels
ISO 14122-2:2001
Safety of machinery. Permanent means of access to machinery. ;orking platforms and
walkways
ISO 14122-3:2001
Safety of machinery. Permanent means of access to machinery. Stairways% stepladders and
guard-rails
ISO 14125:1998
>i$re-reinforced plastic composites. Determination of fle/ural properties
ISO 14126:1999
>i$re-reinforced plastic composites. Determination of compressive properties in the in-plane
direction
ISO 14129:1998
>i$re-reinforced plastic composites. Determination of the in-plane shear stressshear strain
response% including the in-plane shear modulus and strength $y the BAP C(BAD tension test
method
ISO 14130:1998
>i$re-reinforced plastic composites. Determination of apparent interlaminar shear strength $y
short-$eam method
ISO 14137:2000
0achine tools. -est conditions for wire electrical-discharge machines (wire <D0). -erminology
and testing of the accuracy
ISO 14139:2000
1ydrometric determinations. >low measurements in open channels using structures. &ompound
gauging structures
ISO%IEC 14143-1:1998
!nformation technology. Software measurement. >unctional si.e measurement. Definition of
concepts
ISO%IEC 14143-2:2002
!nformation technology. Software measurement. >unctional si.e measurement. &onformity
evaluation of software si.e measurement methods to !S"!<& )C)C'-)6)EE,
ISO%IEC &' 14143-4:2002
!nformation technology. Software measurement. >unctional si.e measurement. #eference model
ISO 14152:2001
?eutron radiation protection shielding. Design principles and considerations for the choice of
appropriate materials
ISO 14155-1:2003
&linical investigation of medical devices for human su$+ects. General re=uirements
ISO 14155-2:2003
&linical investigation of medical devices for human su$+ects. &linical investigation plans
ISO 14156:2001
0ilk and milk products. </traction methods for lipids and liposolu$le compounds
ISO 14160:1998
Sterili.ation of single-use medical devices incorporating materials of animal origin. 7alidation
and routine control of sterili.ation $y li=uid chemical sterilants
ISO 14161:2001
Sterili.ation of health care products. Biological indicators. Guidance for the selection% use and
interpretation of results
ISO 14163:1998
3coustics. Guidelines for noise control $y silencers
ISO 14164:1999
Stationary source emissions. Determination of the volume flowrate of gas streams in ducts.
3utomated method
ISO 14168:2003
0etallic powders% e/cluding hardmetals. 0ethod for testing copper-$ase infiltrating powders
ISO%&' 14179-1:2001
Gears. -hermal capacity. #ating gear drives with thermal e=uili$rium at E(BAD& sump
temperature
ISO%&' 14179-2:2001
Gears. -hermal capacity. -hermal load carrying capacity
ISO 14180:1998
Solid mineral fuels. Guidance on the sampling of coal seams
ISO 14182:2000
3nimal feeding stuff. Determination of residues of organophosphorus pesticides. Gas
chromatographic method
ISO 14184-1:1999
-e/tiles. Determination of formaldehyde. >ree and hydroly.ed formaldehyde (water e/traction
method)
ISO 14184-2:1998
-e/tiles. Determination of formaldehyde. #eleased formaldehyde (vapour a$sorption method)
ISO 14224:1999
Petroleum and natural gas industries. &ollection and e/change of relia$ility and maintenance
data for e=uipment
ISO 14233:2003
Dentistry. Polymer-$ased die materials
ISO 14237:2000
Surface chemical analysis. Secondary-ion mass spectrometry. Determination of $oron atomic
concentration in silicon using uniformly doped materials
ISO 14242-1:2002
!mplants for surgery. ;ear of total hip +oint prostheses. 2oading and displacement parameters
for wear-testing machines and corresponding environmental conditions for test
ISO 14242-2:2000
!mplants for surgery. ;ear of total hip +oint prostheses. 0ethods of measurement
ISO 14243-1:2002
!mplants for surgery. ;ear of total knee +oint prostheses. 2oading and displacement parameters
for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-2:2000
!mplants for surgery. ;ear of total knee +oint prostheses. 0ethods of measurement
ISO 14246:2001
-ransporta$le gas cylinders. Gas cylinder valves. 0anufacturing tests and inspections
ISO%IEC &' 14252:1996
!nformation technology. Guide to the P"S!8 open system environment ("S<)
ISO 14253-1:1999
Geometrical product specifications (GPS). !nspection $y measurement of workpieces and
measuring e=uipment. Decision rules for proving conformance or non-conformance with
specifications
DD E!+ ISO 14253-2:2001
Geometrical product specifications (GPS). !nspection $y measurement of workpieces and
measuring e=uipment. Guide to the estimation of uncertainty in GPS measurement% in cali$ration
of measuring e=uipment and in product verification
ISO 14257:2001
3coustics. 0easurement and parametric description of spatial sound distri$ution curves in
workrooms for evaluation of their acoustical performance
ISO 14258:1998
!ndustrial automation systems. &oncepts and rules for enterprise models
ISO 14268:2002
2eather. Physical and mechanical tests. Determination of water vapour permea$ility
ISO 14269-1:1997
-ractors and self-propelled machines for agriculture and forestry. "perator enclosure
environment. 7oca$ulary
ISO 14269-2:1997
-ractors and self-propelled machines for agriculture and forestry. "perator enclosure
environment. 1eating% ventilating and air-conditioning test method and performance
ISO 14269-3:1997
-ractors and self-propelled machines for agriculture and forestry. "perator enclosure
environment. Determination of effect of solar heating
ISO 14269-4:1997
-ractors and self-propelled machines for agriculture and forestry. "perator enclosure
environment. 3ir filter element test method
ISO 14269-5:1997
-ractors and self-propelled machines for agriculture and forestry. "perator enclosure
environment. Pressuri.ation system test method
ISO 14270:2001
Specimen dimensions and procedure for mechani.ed peel testing resistance spot% seam and
em$ossed pro+ection welds
ISO 14271:2001
7ickers hardness testing of resistance spot% pro+ection and seam welds (low load and
microhardness)
ISO 14272:2001
Specimen dimensions and procedure for cross tension testing resistance spot and em$ossed
pro+ection welds
ISO 14273:2001
Specimen dimensions and procedure for shear testing resistance spot% seam and em$ossed
pro+ection welds
ISO 14275:2002
3erospace. Drives% internal% offset cruciform% ri$$ed. 0etric series
ISO 14276:2002
3erospace. Drives% internal% offset cruciform. 0etric series
ISO 14277:2002
3erospace. Drivers% ri$$ed% for internal offset cruciform ri$$ed or unri$$ed drives. 0etric series
ISO 14278:2002
3erospace. Gauges% for internal offset cruciform ri$$ed or unri$$ed drives. 0etric series
ISO 14279:2002
3erospace. Drives% internal% cruciform. 0etric series
ISO 14280:2002
3erospace. Drivers% ri$$ed% for internal cruciform ri$$ed or unri$$ed drives. 0etric series
ISO 14281:2002
3erospace. Gauges% for internal cruciform ri$$ed or unri$$ed drives. 0etric series
ISO 14284:2002
Steel and iron. Sampling and preparation of samples for the determination of chemical
composition
ISO 14300-2:2002
Space systems. Programme management. Product assurance
ISO 14302:2002
3erospace series. Space systems. <lectromagnetic compati$ility re=uirements
ISO 14303:2002
Space systems. 2aunch-vehicle-to-spacecraft interfaces
ISO 14310:2002
Petroleum and natural gas industries. Downhole e=uipment. Packers and $ridge plugs
ISO 14315:1997
Specification for industrial wire screens
ISO 14324:2003
#esistance spot welding. Destructive tests of welds. 0ethod for the fatigue testing of spot
welded +oints
ISO 14329:2003
#esistance welding. Destructive tests of welds. >ailure types and geometric measurements for
resistance spot% seam and pro+ection welds
ISO 14356:2003
Dentistry. Duplicating material
ISO 14368-1:2000
0ineral and sapphire watch-glasses. Dimensions and tolerances
ISO 14368-2:2003
0ineral and sapphire watch-glasses. 3ssem$ly to the case $y adhesive or using a gasket
ISO%IEC &' 14369:1999
!nformation technology. Programming languages% their environments and system software
interfaces. Guidelines for the preparation of 2anguage-!ndependent Service Specifications
(2!SS)
ISO 14372:2001
;elding consuma$les. Determination of moisture resistance of manual metal arc welding
electrodes $y measurement of diffusi$le hydrogen
ISO 14377:2002
&anned evaporated milk. Determination of tin content. 0ethod using graphite furnace atomic
a$sorption spectrometry
ISO 14378:2000
0ilk and dried milk. Determination of iodide content. 0ethod using high performance li=uid
chromatography
ISO%IEC 14392:1996
!nformation technology. Directory services. 3pplication program interface (3P!) (language
independent)
ISO%IEC 14393:1996
!nformation technology. -est methods for measuring conformance to directory services.
3pplication program interface (3P!) (language independent)
ISO%IEC 14394:1996
!nformation technology. Directory services & language interfaces. Binding for application
program interface (3P!)
ISO%IEC 14395:1996
!nformation technology. -est methods for measuring conformance to directory services &
language interfaces. Binding for application program interface (3P!)
ISO 14396:2002
#eciprocating internal com$ustion engines. Determination and method for the measurement of
engine power. 3dditional re=uirements for e/haust emission tests in accordance with !S" ,):,
ISO 14397-1:2002
<arth-moving machinery. 2oaders and $ackhoe loaders. &alculation of rated operating capacity
and test method for verifying calculated tipping load
ISO 14397-2:2002
<arth-moving machinery. 2oaders and $ackhoe loaders. -est method for measuring $reakout
forces and lift capacity to ma/imum lift height
ISO 14402:1999
;ater =uality. Determination of phenol inde/ $y flow analysis (>!3 and &>3)
ISO 14403:2002
;ater =uality. Determination of total cyanide and free cyanide $y continuous flow analysis
ISO 14408:1998
-racheal tu$es designed for laser surgery. #e=uirements for marking and accompanying
information
ISO 14419:1999
-e/tiles. "il repellency. 1ydrocar$on resistance test
ISO 14438:2002
Glass in $uilding. Determination of energy $alance value. &alculation method
ISO%IEC 14443-1:2000
!dentification cards. &ontactless integrated circuit(s) cards. Pro/imity cards. Physical
characteristics
ISO%IEC 14443-2:2001
!dentification cards. &ontactless integrated circuit(s) cards. Pro/imity cards. #adio fre=uency
power and signal interface
ISO%IEC 14443-3:2001
!dentification cards. &ontactless integrated circuit(s) cards. Pro/imity cards. !nitiali.ation and
anticollision
ISO%IEC 14443-4:2001
!dentification cards. &ontactless integrated circuit(s) cards. Pro/imity cards. -ransmission
protocol
ISO 14453:2000
Pulps. Determination of acetone-solu$le matter
ISO 14460:1999
Protective clothing for automo$ile racing drivers. Protection against heat and flame. Performance
re=uirements and test methods
ISO%IEC &' 14471:1999
!nformation technology. Software engineering. Guidelines for the adoption of &3S< tools
ISO%IEC 14478-1:1998
!nformation technology. &omputer graphics and image processing. Presentation environment for
multimedia o$+ects (P#<0"). >undamentals of P#<0"
ISO%IEC 14478-2:1998 +er1.o* 2
!nformation technology. &omputer graphics and image processing. Presentation environment for
multimedia o$+ects (P#<0"). >oundation component
ISO%IEC 14478-3:1998
!nformation technology. &omputer graphics and image processing. Presentation environment for
multimedia o$+ects (P#<0"). 0ultimedia systems services
ISO%IEC 14478-4:1998
!nformation technology. &omputer graphics and image processing. Presentation environment for
multimedia o$+ects (P#<0"). 0odelling% rendering and interaction component
ISO 14487:1997
Pulps. Standard water for physical testing
ISO%IEC 14495-1:1999
!nformation technology. 2ossless and near-lossless compression of continuous-tone still images.
Baseline (&D-#"0)
ISO 14500:2003
-e/tile machinery and accessories. 1arnesses for 5ac=uard weaving machines. 7oca$ulary
ISO 14501:1999
0ilk and milk powder. Determination of aflato/in 0Bd) content. &lean-up $y immunoaffinity
chromatography and determination $y high-performance li=uid chromatography
ISO 14507:2003
Soil =uality. Pretreatment of samples for determination of organic contaminants
ISO 14508:1997
#oad vehicles. Spark plugs. -erminals
ISO 14509:2001
Small craft. 0easurement of air$orne sound emitted $y powered recreational craft
ISO 14511:2001
0easurement of fluid flow in closed conduits. -hermal mass flowmeters
ISO 14512:1999
Passenger cars. Straight-ahead $raking on surfaces with split coefficient of friction. "pen-loop
test method
ISO%IEC 14515-1:2000
!nformation technology. Porta$le "perating Systems !nterface (P"S!8). -est methods for
measuring conformance to P"S!8. System interfaces
ISO%IEC &' 14516:2002
!nformation technology. Security techni=ues. Guidelines for the use and management of trusted
third party services
ISO%IEC 14517:1996
!nformation technology. )'A mm optical disk cartridges for information interchange. &apacity6
@%* G$ytes per cartridge
ISO%IEC 14519:2001
!nformation technology. P"S!8 3da language interfaces. Binding for system application
program interface (3P!)
ISO 14520-1:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. General
re=uirements
ISO 14520-2:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. &>D";?'!
e/tinguishant
ISO 14520-3:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. >&-@-)-,
e/tinguishant
ISO 14520-4:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. >&-'-)-)A
e/tinguishant
ISO 14520-6:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. 1&>& Blend 3
e/tinguishant
ISO 14520-7:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. 1&>& Blend )@C
e/tinguishant
ISO 14520-8:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. 1&>& )@(
e/tinguishant
ISO 14520-9:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. 1>& @@:ea
e/tinguishant
ISO 14520-10:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. 1>& @'
e/tinguishant
ISO 14520-11:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. 1>& @'*fa
e/tinguishant
ISO 14520-12:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. !G-A) e/tinguishant
ISO 14520-13:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. !G-)AA e/tinguishant
ISO 14520-14:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. !G-(( e/tinguishant
ISO 14520-15:2000
Gaseous fire-e/tinguishing systems. Physical properties and system design. !G-(C) e/tinguishant
ISO 14524:1999
Photography. <lectronic still-picture cameras. 0ethods for measuring opto-electronic conversion
functions ("<&>s)
ISO 14526-1:2000
Plastics. Phenolic powder moulding compounds (P>-P0&s). Designation system and $asis for
specifications
ISO 14526-2:2000
Plastics. Phenolic powder moulding compounds (P>-P0&s). Preparation of test specimens and
determination of properties
ISO 14526-3:2000
Plastics. Phenolic powder moulding compounds (P>-P0&s). #e=uirements for selected
moulding compounds
ISO 14527-1:2000
Plastics. Drea-formaldehyde and ureamelamine-formaldehyde powder moulding compounds
(D>- and D>0>-P0&s). Designation system and $asis for specifications
ISO 14527-2:2000
Preparation of test specimens and determination of properties
ISO 14527-3:2000
Plastics. Drea-formaldehyde and ureamelamine-formaldehyde powder moulding compounds
(D>- and D>0>-P0&s). #e=uirements for selected moulding compounds
ISO 14528-1:2000
Plastics. 0elamine-formaldehyde powder moulding compounds (0>-P0&s). Designation
system and $asis for specifications
ISO 14528-2:2000
Plastics. 0elamine-formaldehyde powder moulding compounds (0>-P0&s). Preparation of test
specimens and determination of properties
ISO 14528-3:2000
Plastics. 0elamine-formaldehyde powder moulding compounds (0>-P0&s). #e=uirements for
selected moulding compounds
ISO 14529-1:2000
Plastics. 0elaminephenolic powder moulding compounds (0P-P0&s). Designation system and
$asis for specifications
ISO 14529-2:2000
Plastics. 0elaminephenolic powder moulding compounds (0P-P0&s). Preparation of test
specimens and determination of properties
ISO 14529-3:2000
Plastics. 0elaminephenolic powder moulding compounds (0P-P0&s). #e=uirements for
selected moulding compounds
ISO 14530-1:2000
Plastics. Dnsaturated-polyester powder moulding compounds (DP-P0&s). Designation system
and $asis for specifications
ISO 14530-2:2000
Plastics. Dnsaturated-polyester powder moulding compounds (DP-P0&s). Preparation of test
specimens and determination of properties
ISO 14530-3:2000
Plastics. Dnsaturated-polyester powder moulding compounds (DP-P0&s). #e=uirements for
selected moulding compounds
ISO 14531-1:2002
Plastics pipes and fittings. &rosslinked polyethylene (P<-8) pipe systems for the conveyance of
gaseous fuels. 0etric series. Specifications. Pipes
ISO 14532:2001
?atural gas. 7oca$ulary
ISO 14534:2002
"phthalmic optics. &ontact lenses and contact lens care products. >undamental re=uirements
ISO 14535:2001
Photography. #oom-light loading packages for electronic scanners and image-setting film and
paper rolls. Dimensions and related re=uirements
ISO 14539:2001
0anipulating industrial ro$ots. "$+ect handling with grasp-type grippers. 7oca$ulary and
presentation of characteristics
ISO 14546:2000
Photography. 3erial films and spools. Dimensions
ISO 14554-1:2001
9uality re=uirements for welding. #esistance welding of metallic materials. &omprehensive
=uality re=uirements
ISO 14554-2:2001
9uality re=uirements for welding. #esistance welding of metallic materials. <lementary =uality
re=uirements
ISO 14555:1998
;elding. 3rc stud welding of metallic materials
ISO 14556:2000
Steel. &harpy 7-notch pendulum impact test. !nstrumented test method
ISO 14558:2000
#u$$er. Determination of residual unsaturation of hydrogenated nitrile ru$$er (1?B#) $y
infrared spectroscopy
ISO 14565:2001
3nimal feeding stuffs. Determination of vitamin 3 content. 0ethod using high-performance
li=uid chromatography
ISO%IEC 14568:1997
!nformation technology. D82. Diagram e/change language for tree-structured charts
ISO 14577-1:2002
0etallic materials. !nstrumented indentation test for hardness and materials parameters. -est
method
ISO 14577-2:2002
0etallic materials. !nstrumented indentation test for hardness and materials parameters.
7erification and cali$ration of testing machines
ISO 14577-3:2002
0etallic materials. !nstrumented indentation test for hardness and materials parameters.
&ali$ration of reference $locks
ISO 14579:2001
1e/alo$ular socket head cap screws
ISO 14580:2001
1e/alo$ular socket cheese head screws
ISO 14583:2001
1e/alo$ular socket pan head screws
ISO 14584:2001
1e/alo$ular socket raised countersunk head screws
ISO 14585:2001
1e/alo$ular socket pan head tapping screws
ISO 14586:2001
1e/alo$ular socket countersunk head tapping screws
ISO 14587:2001
1e/alo$ular socket raised countersunk (oval) head tapping screws
ISO 14588:2001
Blind rivets. -erminology and definitions
ISO 14589:2001
Blind rivets. 0echanical testing
ISO 14592-1:2002
;ater =uality. <valuation of the aero$ic $iodegrada$ility of organic compounds at low
concentrations. Shake-flask $atch test with surface water or surface watersediment suspensions
ISO 14592-2:2002
;ater =uality. <valuation of the aero$ic $iodegrada$ility of organic compounds at low
concentrations. &ontinuous flow river model with attached $iomass
ISO 14596:1998
0ethods of test for petroleum and its products. Determination of sulfur content. ;avelength-
dispersive 8-ray fluorescence spectrometry
ISO 14597:1999
Petroleum products. Determination of vanadium and nickel content. ;avelength-dispersive 8-
ray fluorescence spectrometry
ISO%IEC 14598-1:1999
!nformation technology. Software production evaluation. General overview
ISO%IEC 14598-2:2000
!nformation technology. Software production evaluation. Planning and management
ISO%IEC 14598-3:2000
!nformation technology. Software production evaluation. Process for developers
ISO%IEC 14598-4:1999
!nformation technology. Software production evaluation. Process for ac=uirers
ISO%IEC 14598-5:1998
!nformation technology. Software production evaluation. Process for evaluators
ISO%IEC 14598-6:2001
!nformation technology. Software production evaluation. Documentation of evaluation modules
ISO 14602:1998
?on-active surgical implants. !mplants for osteosynthesis. Particular re=uirements
ISO 14606:2000
Surface chemical analysis. Sputter depth profiling. "ptimi.ation using layered systems as
reference materials
ISO 14615:1997
3dhesives. Dura$ility of structural adhesive +oints. </posure to humidity and temperature under
load
ISO 14616:1997
Plastics. 1eatshrinka$le films of polyethylene% ethylene copolymers and their mi/tures.
Determination of the shrinkage stress and contraction stress
ISO 14620-1:2002
Space systems. Safety re=uirements. System safety
ISO 14630:1998
General re=uirements for non-active surgical implants
ISO 14631:1999
</truded sheets of impact-modified polystyrene (PS-!). #e=uirements and test methods
ISO 14632:1999
</truded sheets of polyethylene (P<-1D). #e=uirements and test methods
ISO 14635-1:2000
Gears. >4G test procedures. >4G test method 3,% 'EA for relative scruffing load-carrying
capacity of oils
ISO 14644-1:1999
&leanrooms and associated controlled environments. &lassification of air cleanliness
ISO 14644-2:2000
&leanrooms and associated controlled environments. Specifications for testing and monitoring to
prove continued compliance with !S" )C*CC-)
ISO 14644-4:2001
&leanrooms and associated controlled environments. Design% construction and start-up
ISO 14647:2000
0etallic coatings. Determination of porosity on gold coatings on metallic su$strates. ?itric acid
vapour test
ISO 14648-1:2001
0icrographics. 9uality control of &"0 recorders that generate images using a single internal
display system. &haracteristics of the software test target
ISO 14648-2:2001
0icrographics. 9uality control of &"0 recorders that generate images using a single internal
display system. 0ethod of use
ISO%IEC 14651:2001
!nformation technology. !nternational string ordering and comparision. 0ethod for comparing
character strings and description of the common template tailora$le ordering
ISO 14654:1999
<po/y-coated steel for the reinforcement of concrete
ISO 14656:1999
<po/y powder and sealing material for the coating of steel for the reinforcement of concrete
ISO 14660-1:2000
Geometrical Product Specifications (GPS). Geometrical features. General terms and definitions
ISO 14660-2:2000
Geometrical Product Specifications (GPS). Geometrical features. </tracted median line of a
cylinder and a cone% e/tracted median surface% local si.e of an e/tracted feature
ISO 14661:2000
-hermal tur$ines for industrial applications (steam tur$ines% gas e/pansion tur$ines). General
re=uirements
ISO%IEC 14662:1997
!nformation technology. "pen-<D! reference model
ISO 14663-1:1999
Plastics. <thylenevinyl alcohol (<7"1) copolymer moulding and e/trusion materials.
Designation system and $asis for specifications
ISO 14663-2:1999
Plastics. <thylenevinyl alcohol (<7"1) copolymer moulding and e/trusion materials.
Preparation of test specimens and determination of properties
ISO 14673-1:2001
0ilk and milk products. Determination of nitrate and nitrite contents. 0ethod using cadmium
reduction and spectrometry
ISO 14673-2:2001
0ilk and milk products. Determination of nitrate and nitrite contents. 0ethod using segmented
flow analysis (#outine method)
ISO 14673-3:2001
0ilk and milk products. Determination of nitrate and nitrite contents. 0ethod using cadmium
reduction and flow in+ection analysis with in-line dialysis (#outine method)
ISO 14675:2003
0ilk and milk products. Guidelines for a standardi.ed description of competitive en.yme
immunoassays. Determination of aflato/in 0BD) content
ISO 14681:1998
Diesel engines. >uel in+ection pump testing. &ali$rating fuel in+ectors
ISO 14683:1999
-hermal $ridges in $uilding construction. 2inear thermal transmittance. Simplified methods and
default values
ISO 14686:2003
1ydrometric determinations. Pumping tests for water wells. &onsiderations and guidelines for
design% performance and use
ISO 14688-1:2002
Geotechnical investigation and testing. !dentification and classification of soil. !dentification and
description
ISO 14691:2000
Petroleum and natural gas industries. >le/i$le couplings for mechanical power transmission.
General purpose applications
ISO 14692-1:2002
Petroleum and natural gas industries. Glass-reinforced plastics (G#P) piping. 7oca$ulary%
sym$ols% applications and materials
ISO 14692-2:2002
Petroleum and natural gas industries. Glass-reinforced plastics (G#P) piping. 9ualification and
manufacture
ISO 14692-3:2002
Petroleum and natural gas industries. Glass-reinforced plastics (G#P) piping. System design
ISO 14692-4:2002
Petroleum and natural gas industries. Glass-reinforced plastics (G#P) piping. >a$rication%
installation and operation
ISO 14695:2003
>ans for general purposes. 0ethod of measurement of fan vi$ration
ISO%&' 14696:1999
#eaction to fire tests. Determination of fire parameters of materials% products and assem$lies
using an intermediate scale heat release calorimeter (!&32)
ISO%&' 14697:1997
>ire tests. Guidance on the choice of su$strates for $uilding products
ISO%IEC 14699:1997
!nformation technology. "pen systems interconnection. -ransport fast $yte protocol
ISO%IEC 14700:1997
!nformation technology. "pen systems interconnection. ?etwork fast $yte protocol
ISO 14706:2000
Surface chemical analysis. Determination of surface elemental contamination on silicon wafers
$y total-reflection 8-ray flourescence (-8#>) spectroscopy
ISO 14707:2000
Surface chemical analysis. Glow discharge optical emission spectrometry (GD-"<S).
!ntroduction to use
ISO%IEC 14709-1:1997
!nformation technology. &onfiguration of customer premises ca$ling (&P&) for applications.
!SD? $asic access
ISO 14711:2003
Space systems. Dnmanned mission operations concepts. Guidelines for defining and assessing
concept products
ISO 14713:1999
Protection against corrosion of iron and steel in structures. 4inc and aluminium coatings.
Guidelines
ISO 14714:1998
<ssential oils and aromatic e/tracts. Determination of residual $en.ene content
ISO 14721:2003
Space data and information transfer systems. "pen archival information systems. #eference
model
ISO 14723:2002
Petroleum and natural gas industries. Pipeline transportation systems. Su$sea pipeline valves
ISO 14726-1:2002
Ships and marine technology. !dentification colours for the content of piping systems. 0ain
colours and media
ISO 14727:1999
Dental implants. Prefa$ricated parts connecting suprastructures to dental implants. &ontents of
technical file
ISO 14729:2001
"phthalmic optics. &ontact lens care products. 0icro$iological re=uirements and test methods
for products and regimens for hygienic management of contact lenses
ISO 14730:2000
"phthalmic optics. &ontact lens care products. 3ntimicro$ial preservative efficacy testing and
guidance on determining discard date
ISO 14738:2002
Safety of machinery. 3nthropometric re=uirements for the design of workstations at machinery
ISO 14740:1998
>orestry machinery. Backpack power units for $rush cutters% grass trimmers% pole cutters and
similar appliances. Safety re=uirements and testing
ISO 14744-1:2001
;elding. 3cceptance inspection of electron $eam welding machines. Principles and acceptance
conditions
ISO 14744-2:2001
;elding. 3cceptance inspection of electron $eam welding machines. 0easurement of
accelerating voltage characteristics
ISO 14744-3:2001
;elding. 3cceptance inspection of electron $eam welding machines. 0easurement of $eam
current characteristics
ISO 14744-4:2001
;elding. 3cceptance inspection of electron $eam welding machines. 0easurement of welding
speed
ISO 14744-5:2001
;elding. 3cceptance inspection of electron $eam welding machines. 0easurement of run-out
accuracy
ISO 14744-6:2001
;elding. 3cceptance inspection of electron $eam welding machines. 0easurement of sta$ility
of spot position
ISO%IEC 14752:2000
!nformation technology. "pen Distri$uted Processing. Protocol support for computational
interactions
ISO%IEC 14753:1999
!nformation technology. "pen distri$uted processing. !nterface references and $inding
ISO%IEC 14755:1997
!nformation technology. !nput methods to enter characters from the repertoire of !S"!<& )A*C*
with a key$oard or other input device
ISO%IEC 14756:1999
!nformation technology. 0easurement and rating of performance of computer-$ased software
systems (&D-#"0)
ISO%IEC &' 14759:1999
Software engineering. 0ock up and prototype. 3 categori.ation of software mock up and
prototype models and their use
ISO%IEC 14764:1999
!nformation technology. Software maintenance
ISO%IEC 14765:1997
!nformation technology. >ramework for protocol identification and encapsulation
ISO%IEC 14766:1997
!nformation technology. -elecommunications and information e/change $etween systems. Dse
of "S! applications over the internet transmission control protocol (-&P)
ISO%IEC 14769:2001
!nformation technology. "pen distri$uted processing. -ype repository function
ISO%IEC 14771:1999
!nformation technology. "pen distri$uted. Processing. ?aming framework
ISO 14793:2003
#oad vehicles. 1eavy commercial vehicles and $uses. 2ateral transient response test methods
ISO 14801:2003
Dentistry. >atigue test for endosseous dental implants
ISO 14807:2001
Photography. -ransmission and reflection densitometers. 0ethod for determining performance
ISO 14808:1997
Photography. &omposition of )'(-film canisters
DD E!+ ISO 14815:2000
#oad transport and traffic telematics. 3utomatic vehicle and e=uipment identification. System
specification
DD E!+ ISO 14816:2000
#oad transport and traffic telematics. 3utomatic vehicle and e=uipment identification.
?um$ering and data structures
DD E!+ ISO 14819-3:2001
-raffic and travel information (--!). --! messages via traffic message coding. 2ocation
referencing for 32<#--&
DD E!+ ISO 14825:1997
Geographic data files
ISO%IEC 14834:1996
!nformation technology. Distri$uted transaction processing. -he 83 specification
ISO 14839-1:2002
0echanical vi$ration. 7i$ration of rotating machinery e=uipped with active magnetic $earings.
7oca$ulary
ISO 14847:1999
#otary positive displacement pumps. -echnical re=uirements
ISO 14848:1998
Plastics. Dnsaturated-polyester resins. Determination of reactivity at )'ABAD&
ISO 14849:1999
Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium
compounds. !ndophenol method
ISO 14851:1999
Determination of the ultimate aero$ic $iodegrada$ility of plastic materials in an a=ueous
medium. 0ethod $y measuring the o/ygen demand in a closed respirometer
ISO 14852:1999
Determination of the ultimate aero$ic $iodegrada$ility of plastic materials in an a=ueous
medium. 0ethod $y analysis of evolved car$on dio/ide
ISO 14855:1999
Determination of the ultimate aero$ic $iodegrada$ility and disintegration of plastic materials
under controlled composting conditions. 0ethod $y analysis of evolved car$on dio/ide
ISO 14856:2001
-imekeeping instruments. ;ristwatch cases. >i/ing dimensions of non-spring-$ar types
ISO 14865:1998
0achinery for forestry. Porta$le hand-held $rush cutters and grass trimmers with $ackpack
mounted com$ustion engine power source. Safety re=uirements and testing
ISO 14869-2:2002
Soil =uality. Dissolution for the determination of total element content. Dissolution $y alkaline
fusion
ISO 14877:2002
Protective clothing for a$rasive $lasting operations using granular a$rasives
ISO 14879-1:2000
!mplants for surgery. -otal knee-+oint prostheses. Determination of endurance properties of knee
ti$ial trays
ISO 14880-1:2001
0icrolens array. 7oca$ulary
ISO 14881:2001
!ntegrated optics. !nterfaces. Parameters relevant to coupling properties
ISO%IEC 14882:1998
Programming languages. &MM
ISO 14887:2000
Sample preparation. Dispersing procedures for powders in li=uids
ISO%IEC 14888-1:1998
!nformation technology. Security techni=ues. Digital signatures with appendi/. General
ISO%IEC 14888-2:1999
!nformation technology. Security techni=ues. Digital signatures with appendi/. !dentity-$ased
mechanisms
ISO%IEC 14888-3:1998
!nformation technology. Security techni=ues. Digital signatures with appendi/. &ertificate-$ased
mechanisms
ISO 14889:2003
"phthalmic optics. Spectacle lenses. >undamental re=uirements for uncut finished lenses
ISO 14890:2003
&onveyor $elts. Specification for ru$$er or plastics covered conveyor $elts of te/tile
construction for general use
ISO 14891:2002
0ilk and milk products. Determination of nitrogen content. #outine method using com$ustion
according to the Dumas principle
ISO 14895:2003
Small craft. 2i=uid-fuelled galley stoves
ISO 14896:2001
Plastics. Polyurethane raw materials. Determination of isocyanate content
ISO 14897:2002
Plastics. Polyols for use in the production of polyurethane. Determination of water content
ISO 14898:1999
Plastics. Polyurethane raw materials. 3romatic isocyanates. Determination of acidity
ISO 14899:2001
Plastics. Polyols for use in the production of polyurethane. Determination of $asicity
ISO 14900:2001
Plastics. Polyols for use in the production of polyurethane. Determination of hydro/yl num$er
ISO 14902:2001
3nimal feeding stuffs. Determination of trypsin inhi$itor activity of soya products
DD E!+ ISO 14904:1997
#oad transport and traffic telematics. 3utomatic fee collection (3>&). !nterface specification for
clearing $etween operators
DD E!+ ISO 14906:1999
#oad transport and traffic telematics (#---). <lectronic fee collection (<>&). 3pplication
interface definition for dedicated short range communications
DD E!+ ISO 14907-1:2001
#oad transport and traffic telematics (#---). <lectronic fee collection (<>&). -est procedures
for user and fi/ed e=uipment. Description of test procedures
ISO 14910-1:1997
Plastics. -hermoplastic polyesterester and polyetherester elastomers for moulding and
e/trusion. Designation system and $asis for specifications
ISO 14910-2:1997
Plastics. -hermoplastic polyesterester and polyetherester elastomers for moulding and
e/trusion. Preparation of test specimens and determination of properties
ISO 14911:1999
;ater =uality. Determination of dissolved 2iBuM% ?aBdCBuM% ?1BdCBuM% GBuM% 0nBu@BuM%
&aBu@BuM% 0gBu@BuM% SrBu@BuM and BaBu@BuM using ion chromatography. 0ethod for water
and waste water
ISO 14912:2003
Gas analysis. &onversion of gas mi/ture composition data
ISO 14915-1:2002
Software ergonomics for multimedia user interfaces. Design principles and framework
ISO 14915-2:2003
Software ergonomics for multimedia user interfaces. 0ultimedia navigation and control
ISO 14915-3:2002
Software ergonomics for multimedia user interfaces. 0edia selection and com$ination
ISO 14918:1998
-hermal spraying. 3pproval testing of thermal sprayers
ISO 14919:2001
-hermal spraying% ;ires% rods and cords for flame and arc spraying. &lassification. -echnical
supply conditions
ISO 14920:1999
-hermal spraying. Spraying and fusing of self-flu/ing alloys
ISO 14921:2001
-hermal spraying. Procedure for the application of thermally sprayed coatings for engineering
components
ISO 14922-1:1999
-hermal spraying. 9uality re=uirements of thermally sprayed structures. Guidance for selection
and use
ISO 14922-2:1999
-hermal spraying. 9uality re=uirements of thermally sprayed structures. &omprehensive =uality
re=uirements
ISO 14922-3:1999
-hermal spraying. 9uality re=uirements of thermally sprayed structures. Standard =uality
re=uirements
ISO 14922-4:1999
-hermal spraying. 9uality re=uirements of thermally sprayed structures. <lementary =uality
re=uirements
ISO 14923:2003
-hermal spraying. &haracteri.ation and testing of thermally sprayed coatings
ISO 14935:1999
Petroleum and related products. Determination of wick flame persistence of fire-resistant fluids
ISO 14937:2001
Sterili.ation of health care products. General re=uirements for characteri.ation of a sterili.ing
agent and the development% validation and routine control of a sterili.ation process for medical
devices
ISO 14939:2001
3nimal feeding stuffs. Determination of car$ado/ content. 0ethod using high performance
li=uid chromatography
ISO 14946:2001
Small craft. 0a/imum load capacity
ISO 14949:2001
!mplants for surgery. -wo-part addition-cure silicone elastomers
ISO 14951-1:1999
Space systems. >luid characteristics. "/ygen
ISO 14951-2:1999
Space systems. >luid characteristics. 1ydrogen propellant
ISO 14951-3:1999
Space systems. >luid characteristics. ?itrogen
ISO 14951-4:1999
Space systems. >luid characteristics. 1elium
ISO 14951-5:1999
Space systems. >luid characteristics. ?itrogen tetro/ide propellant
ISO 14951-6:1999
Space systems. >luid characteristics. 0onomethylhydra.ine propellant
ISO 14951-7:1999
Space systems. >luid characteristics. 1ydra.ine propellant
ISO 14951-8:1999
Space systems. >luid characteristics. Gerosene propellant
ISO 14951-9:1999
Space systems. >luid characteristics. 3rgon
ISO 14951-10:1999
Space systems. >luid characteristics. ;ater
ISO 14951-11:1999
Space systems. >luid characteristics. 3mmonia
ISO 14951-12:1999
Space systems. >luid characteristics. &ar$on dio/ide
ISO 14951-13:1999
Space systems. >luid characteristics. Breathing air
ISO 14953:2000
Space systems. Structural design. Determination of loading levels for static =ualification testing
of launch vehicles
ISO 14956:2002
3ir =uality. <valuation of the suita$ility of a measurement procedure $y comparison with a
re=uired measurement uncertainty
ISO 14961:2002
Space data and information transfer systems. Parameter value language specification
ISO 14964:2000
0echanical vi$ration and shock. 7i$ration of stationary structures. Specific re=uirements for
=uality management in measurement and evaluation of vi$ration
ISO 14965:2000
3m$ient air. Determination of total non-methane organic compounds. &ryogenic
preconcentration and direct flame ioni.ation detection method
ISO 14966:2002
3m$ient air. Determination of numerical concentration of inorganic fi$rous particles. Scanning
electron microscopy method
ISO 14968:1999
Paper and $oard. &ut-si.e office paper. 0easurement of curl in a pack of sheets
ISO 14971:2001
0edical devices. 3pplication of risk management to medical devices
ISO 14972:1998
Sterile o$turators for single use with over-needle peripheral intravascular catheters
ISO 14975:2000
Surface chemical analysis. !nformation formats
ISO 14976:1998
Surface chemical analysis. Data transfer format
ISO%IEC 14977:1996
!nformation technology. Syntactic 0etalanguage. </tended B?>
ISO 14982:1998
3gricultural and forestry machinery. <lectromagnetic compati$ility. -est methods and
acceptance criteria
ISO 14985:1999
1ard-copy output of engineering drawings. Specification for the structure of control files
ISO 14997:2003
"ptics and optical instruments. -est methods for surface imperfections of optical elements
ISO 15000 - ISO 20000 2
ISO 15001:2003
3naesthetic and respiratory e=uipment. &ompati$ility with o/ygen
ISO 15004:1998
"phthalmic instruments. >undamental re=uirements and test methods
ISO 15005:2002
#oad vehicles. <rgonomic aspects of transport information and control systems. Dialogue
management principles and compliance procedures
ISO 15007-1:2002
#oad vehicles. 0easurement of driver visual $ehaviour with respect to transport information and
control systems. Definitions and parameters
ISO 15008:2003
#oad vehicles. <rgonomic aspects of transport information and control systems. Specifications
and compliance procedures for in-vehicle visual presentation
ISO 15009:2002
Soil =uality. Gas chromatographic determination of the content of volatile aromatic
hydrocar$ons% naphthalene and volatile halogenated hydrocar$ons. Purge-and-trap method with
thermal desorption
ISO 15010:1998
Disposa$le hanging devices for transfusion and infusion $ottles. #e=uirements and test methods
ISO 15011-1:2002
1ealth and safety in welding and allied processes. 2a$oratory method for sampling fume and
gases generated $y arc welding. Determination of emission rate and sampling for analysis of
particulate fume
ISO 15011-2:2003
1ealth and safety in welding and allied processes. 2a$oratory method for sampling fume and
gases generated $y arc welding. Determination of emission rates of gases% e/cept o.one
ISO 15011-3:2002
1ealth and safety in welding and allied processes. 2a$oratory method for sampling fume and
gases generated $y arc welding. Determination of o.one concentration using fi/ed point
measurements
ISO 15013:1999
</truded sheets of polypropylene (PP). #e=uirements and test methods
ISO 15016:2002
Ships and marine technology. Guidelines for the assessment of speed and power performance $y
analysis of speed trial data
ISO 15022-1:1999
Securities. Scheme for messages (data field dictionary). Data field and message design rules and
guidelines
ISO 15022-2:1999
Securities. Scheme for messages (data field dictionary). 0aintenance of the data field dictionary
and catalogue of messages
ISO 15023-1:2001
Plastics. Poly(vinyl alcohol) (P732) materials. Designation system and $asis for specifications
ISO 15023-2:2003
Plastics. Poly(vinyl alcohol) (P732) materials. Determination of properties
ISO 15024:2001
>i$re-reinforced plastic composites. Determination of mode ! interlaminar fracture toughness%
BiGBdiBdc% for unidirectionally reinforced materials
ISO 15025:2002
Protective clothing. Protection against heat and flame. 0ethod of test for limited flame spread
ISO%IEC 15026:1998
!nformation technology. System and software integrity levels
ISO 15027-1:2002
!mmersion suits. &onstant wear suits% re=uirements including safety
ISO 15027-2:2002
!mmersion suits. 3$andonment suits% re=uirements including safety
ISO 15027-3:2002
!mmersion suits. -est methods
ISO 15029-1:2000
Petroleum and related products. Determination of spray ignition characteristics of fire-resistant
fluids. Spray flame persistence. 1ollow-cone no..le method
ISO 15032:2000
Prostheses. Structural testing of hip +oints
ISO 15033:2000
Plastics. Determination of caprolactam and its cyclic and linear oligomers $y 1P2&
ISO 15034:2000
&omposites. Prepregs. Determination of resin flow
ISO 15037-1:1998
#oad vehicles. 7ehicle dynamics test methods. General conditions for passenger cars
ISO 15037-2:2002
#oad vehicles. 7ehicle dynamics test methods. General conditions for heavy vehicles and $uses
ISO 15038:1999
Plastics. "rganic-perester crosslinking agents for unsaturated-polyester thermosetting materials.
Determination of active-o/ygen content
ISO 15040:1999
&omposites. Prepregs. Determination of gel time
ISO 15061:2001
;ater =uality. Determination of dissolved $romate. 0ethod $y li=uid chromatography of ions
ISO%IEC 15068-2:1999
!nformation technology. Porta$le operating system interface (P"S!8) system administration.
Software administration
ISO &' 15069:1997
Series ) freight containers. 1andling and securing. #ationale for !S" ',:C anne/ 3
ISO &' 15070:1996
Series ) freight containers. #ationale for structural test criteria
ISO 15072:1999
1e/agon $olts with flange with metric fine pitch thread. Small series. Product grade 3
ISO 15078:1998
0achinery for forestry. 2og loaders. 2ocation and method of operation of two-lever operator
controls
ISO 15083:2003
Small craft. Bilge-pumping systems
ISO 15084:2003
Small craft. 3nchoring% mooring and towing. Strong points
ISO 15085:2003
Small craft. 0an-over$oard prevention and recovery
ISO 15086-1:2001
1ydraulic fluid power. Determination of fluid-$orne noise characteristics of components and
systems. 1ydraulic fluid power. Determination of the fluid $orne noise characteristics of
components and systems. !ntroduction
ISO 15086-2:2000
1ydraulic fluid power. Determination of fluid-$orne noise characteristics of components and
systems. 0easurement of speed of sound in a fluid in a pipe
ISO 15087-1:2001
Dental elevators. General re=uirements
ISO 15087-2:2000
Dental elevators. ;arwick 5ames elevators
ISO 15087-3:2000
Dental elevators. &ryer elevators
ISO 15087-4:2000
Dental elevators. &oupland elevators
ISO 15087-5:2000
Dental elevators. Bein elevators
ISO 15087-6:2000
Dental elevators. >lohr elevators
ISO 15098-1:2001
Dental twee.ers. General re=uirements
ISO 15098-2:2000
Dental twee.ers. 0eriam types
ISO 15098-3:2000
Dental twee.ers. &ollege types
ISO 15100:2000
Plastics. #einforcement fi$res. &hopped strands. Determination of $ulk density
ISO 15105-1:2002
Plastics. >ilm and sheeting. Determination of gas-transmission rate. Differential-pressure method
ISO 15105-2:2003
Plastics. >ilm and sheeting. Determination of gas-transmission rate. <=ual-pressure method
ISO 15113:1999
#u$$er. Determination of frictional properties
ISO%IEC IS" 15122-2:1999
!nformation technology. !nternational standardi.ed profiles 3"0'nn. "S! management.
3"0')@. 2ower layer systems and network management ensem$le for
-B-&-D-<#B#&profiles
IS" 15124-1:1999
!nformation technology. !nternational standardi.ed profile >"D)@*. "pen document format6
image applications. <nhanced document structure. &haracter% raster graphics% and geometric
graphics content architecture. Document application profile (D3P)
ISO%IEC IS" 15125-7:1998
!nformation technology. !nternational Standardi.ed Profiles 3DFnn. "S! Directory. 3DFC'.
DS3 to DS3 authentication
ISO 15136-1:2001
Downhole e=uipment for petroleum and natural gas industries. Progressing cavity pump systems
for artificial lift. Pumps
ISO 15138:2001
Petroleum and natural gas industries. "ffshore production installations. 1eating% ventilation and
air-conditioning
ISO 15141-1:1998
>oodstuffs. Determination of ochrato/in 3 in cereals and cereal products. 1igh performance
li=uid chromatographic method with silica gel clean up
ISO 15141-2:1998
>oodstuffs. Determination of ochrato/in 3 in cereals and cereal products. 1igh performance
li=uid chromatographic method with $icar$onate clean up
ISO 15142-1:2003
!mplants for surgery. 0etal intramedullary nailing systems. !ntramedullary nails
ISO 15142-2:2003
!mplants for surgery. 0etal intramedullary nailing systems. 2ocking components
ISO 15142-3:2003
!mplants for surgery. 0etal intramedullary nailing systems. &onnection devices and reamer
diameter measurements
ISO%IEC 15145:1997
!nformation technology. Programming languages. >"#-1
ISO 15147:1999
2ight conveyor $elts. -olerances on widths and lengths of cut light conveyor $elts
ISO 15148:2002
1ygrothermal performance of $uilding materials and products. Determination of water
a$sorption coefficient $y partial immersion
ISO 15152:2003
-o$acco. Determination of the content of total alkaloids as nicotine. &ontinuous-flow analysis
method
ISO 15153:2003
-o$acco. Determination of the content of reducing su$stances. &ontinuous-flow analysis method
ISO 15154:2003
-o$acco. Determination of the content of reducing car$ohydrates. &ontinuous-flow analysis
method
ISO 15156-1:2002
Petroleum and natural gas industries. 0aterials for use in 1Bd@S-containing environments in oil
and gas production. General principles for selection of cracking-resistant materials
ISO 15161:2001
Guidelines on the application of !S" EAA)6@AAA for the food and drink industry
ISO 15166-1:1998
3dhesives. 0ethods of preparing $ulk specimens. -wo-part systems
ISO 15166-2:2000
3dhesives. 0ethods of preparing $ulk specimens. <levated-temperature-curing one-part systems
ISO 15171-1:1999
&onnections for fluid power and general use. 1ydraulic couplings for diagnostic purposes.
&oupling not for connection under pressure
ISO 15171-2:2000
&onnections for fluid power and general use. 1ydraulic couplings for diagnostic purposes.
&oupling with 0)* / @ end for connection under pressure
ISO 15176:2002
Soil =uality. &haracteri.ation of e/cavated soil and other soil materials intended for re-use
ISO 15186-1:2000
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements using sound
intensity. 2a$oratory conditions
ISO 15186-2:2003
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements using sound
intensity. >ield measurements
ISO 15186-3:2002
3coustics. 0easurement of sound insulation in $uildings and of $uilding elements using sound
intensity. 2a$oratory measurements at low fre=uencies
ISO 15188:2001
Pro+ect management guidelines for terminology standardi.ation
ISO 15189:2003
0edical la$oratories. Particular re=uirements for =uality and competence
ISO 15197:2003
B:!!n vitroB:# diagnostic test systems. #e=uirements for $lood-glucose monitoring systems for
self-testing in managing dia$etes mellitus
ISO%IEC 15200:1996
!nformation technology. 3daptive lossless data compression algorithm (32D&)
ISO 15202-1:2000
;orkplace air. Determination of metals and metalloids in air$orne particulate matter $y
inductively coupled plasma atomic emission spectrometry. Sampling
ISO 15212-1:1999
"scillation-type density meters. 2a$oratory instruments
ISO 15212-2:2002
"scillation-type density meters. Process instruments for homogenous li=uids
ISO 15213:2003
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of
sulfite-reducing $acteria growing under anaero$ic conditions
ISO 15214:1998
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of
mesophilic lactic acid $acteria. &olony-count techni=ue at 'ABAD&
ISO 15217:2000
>luid power systems and components. )*mm s=uare electrical connector with earth contact.
&haracteristics and re=uirements
ISO 15218:2003
Pneumatic fluid power. '@ solenoid valves. 0ounting interface surfaces
ISO 15225:2000
?omenclature. Specification for a nomenclature system for medical devices for the purpose of
regulatory data e/change
ISO 15227:2000
"ptics and optical instruments. 0icroscopes. -esting of stereomicroscopes
DD ISO%&' 15235:2001
Preparation of steel su$strates $efore application of paints and related products. &ollected
information on the effect of levels of water-solu$le salt contamination
ISO 15241:2001
#olling $earings. Sym$ols for =uantities
ISO 15245-1:2001
Gas cylinders. Parallel threads for connection of valves to gas cylinders. Specification
ISO 15245-2:2001
Gas cylinders. Parallel threads for connection of valves to gas cylinders. Gauge inspection
ISO 15252-1:2000
Plastics. <po/y powder moulding compounds (<P-P0&s). Designation system and $asis for
specifications
ISO 15252-2:2000
Plastics. <po/y powder moulding compounds (<P-P0&s). Preparation of test specimens and
determination of properties
ISO 15252-3:2000
Plastics. <po/y powder moulding compounds (<P-P0&s). #e=uirements for selected moulding
compounds
ISO 15253:2000
"phthalmic optics and instruments. "ptical devices for low-vision aids
ISO 15254:2002
"phthalmic optics and instruments. <lectro-optical devices for enhancing low vision
ISO%IEC &' 15271:1998
!nformation technology. Guide for !S"!<& )@@A:. (Software life cycle processes)
ISO%IEC &' 15285:1998
!nformation technology. 3n operational model for characters and glyphs
ISO%IEC IS" 15287-2:2000
!nformation technology. Standardi.ed application environment profile. Posi/ #ealtime
3pplication Support (3<P)
ISO%IEC 15288:2002
Systems engineering. System life cycle processes
ISO%IEC 15292:2001
!nformation technology. Security techni=ues. Protection profile registration procedures
ISO%IEC &' 15294:2000
!nformation technology. 0ethods for data flow control at synchronous and asynchronous D-<-
D&< interfaces
ISO 15301:2001
3nimal and vegeta$le fats and oils. Determination of sediment in crude fats and oils. &entrifuge
method
ISO 15303:2001
3nimal and vegeta$le fats and oils. Detection and identification of a volatile organic contaminent
$y G&0S
ISO 15304:2002
3nimal and vegeta$le fats and oils. Determination of the content of trans fatty acid isomers of
vegeta$le fats and oil. Gas chromatographic method
ISO 15310:1999
#einforced plastics. Determination of the in-plane shear modulus $y the plate twist method
ISO 15318:2000
Pulp% paper and $oard. Determination of : specified polychlorinated $iphenyls (P&B)
ISO 15319:1999
#ecycled pulps. <stimation of visi$le contraries $y instrumental means using reflected light
ISO 15323:2002
Dried milk protein products. Determination of nitrogen solu$ility inde/
ISO 15324:2000
&orrosion of metals and alloys. <valuation of stress corrosion cracking $y the drop evaporation
test
ISO 15330:1999
>asteners. Preloading test for the detection of hydrogen em$rittlement. Parallel $earing surface
method
ISO 15348:2002
Pipework. 0etal $ellows e/pansion +oints. General
ISO 15349-2:2003
Dnalloyed steel. Determination of low car$on content. !nfrared a$sorption method after
com$ustion in an induction furnace (with preheating)
ISO 15350:2001
Steel and iron. Determination of total car$on and sulfur content. !nfrared a$sorption method after
com$ustion in an induction furnace (routine method)
ISO 15359:1999
Paper and $oard. Determination of the static and kinetic coefficients of friction. 1ori.ontal plane
method
ISO 15360-1:2000
#ecycled pulps. <stimation of stickies and plastics. 7isual method
ISO 15361:2000
Pulps. Determination of .ero-span tensile strength% wet or dry
ISO 15364:2002
Ships and marine technology. Pressurevacuum valves for cargo tanks
ISO 15368:2001
"ptics and optical instruments. 0easurement of reflectance of plane surfaces and transmittance
of plane parallel elements
ISO 15371:2000
Ships and marine technology. >ire-e/tinguishing systems for protection of galley deep-fat
cooking e=uipment. >ire tests
ISO 15372:2000
Ships and marine technology. !nflata$le rescue $oats. &oated fa$rics for inflata$le cham$ers
ISO 15373:2001
Plastics. Polymer dispersions. Determination of free formaldehyde
ISO 15374:1998
!mplants for surgery. #e=uirements for production of forgings
ISO &' 15377:1998
0easurement of fluid flow $y means of pressure differential devices. Guidelines for
specification of no..les and orifice plates $eyond the scope of !S" ()*:-)
ISO 15380:2002
2u$ricants% industrial oils and related products (class 2). >amily 1 (hydraulic systems).
Specifications for categories 1<-G% 1<PG% 1<<S and 1<P#
ISO 15394:2000
Packaging. Bar code and two-dimensional sym$ols for shipping% transport and receiving la$els
ISO 15401:2000
Ships and marine technology. Bulk carriers. &onstruction =uality of hull structure
ISO 15402:2000
Ships and marine technology. Bulk carriers. #epair =uality of hull structure
ISO 15403:2000
?atural gas. Designation of the =uality of natural gas for use as a compressed fuel for vehicles
ISO 15407-1:2000
Pneumatic fluid power. >ive-port directional control valves% si.es ), mm and @* mm. 0ounting
interface surfaces without electrical connector
ISO 15407-2:2003
Pneumatic fluid power. >ive-port directional control valves% si.es ), mm and @* mm. 0ounting
interface surfaces with optional electrical connector
ISO%IEC 15408-1:1999
!nformation technology. Security techni=ues. <valuation criteria for !- security. !ntroduction and
general model
ISO%IEC 15408-2:1999
!nformation technology. Security techni=ues. <valuation criteria for !- security. Security
functional re=uirements
ISO%IEC 15408-3:1999
!nformation technology. Security techni=ues. <valuation criteria for !- security. Security
assurance re=uirements
ISO%IEC &' 15410:1998
!nformation technology. -elecommunications and information e/change $etween systems. P!S?
mo$ility-general principles and services aspects
ISO%IEC 15414:2002
!nformation technology. "pen distri$uted processing. #eference model. <nterprise language
ISO%IEC 15416:2002
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code print
=uality test specification. 2inear sym$ols
ISO%IEC 15417:2000
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code
sym$ology specification. &ode )@,
ISO%IEC 15418:1999
!nformation technology. <3?D&& application identifiers and fact data identifiers and
maintenance
ISO%IEC 15419:2002
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code digital
imaging and printing performance testing
ISO%IEC 15420:2000
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code
sym$ology specification. <3?DP&
ISO%IEC 15421:2002
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code master
test specifications
ISO%IEC 15424:2000
!nformation technology. 3utomatic identification and data capture techni=ues. Data &arrier
!dentifiers (including Sym$ology !dentifiers)
ISO%IEC 15426-1:2000
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code verifier
conformance specifications. 2inear sym$ols
ISO%IEC 15434:1999
!nformation technology. -ransfer synta/ for high capacity 3D& media
ISO%IEC 15437:2001
!nformation technology. <nhancements to 2"-"S (<-2"-"S)
ISO%IEC 15457-1:2001
!dentification cards. -hin fle/i$le cards. Physical characteristics
ISO%IEC 15457-2:2001
!dentification cards. -hin fle/i$le cards. 0agnetic recording techni=ues
ISO 15459-1:1999
!nformation technology. Dni=ue identification of transport units. General
ISO%IEC 15459-2:1999
!nformation technology. Dni=ue identification of transport units. #egistration procedures
ISO 15469:1997
Spatial distri$ution of daylight. &!< standard overcast sky and clear sky
ISO 15472:2001
Surface chemical analysis. 8-ray photoelectron spectrometers. &ali$ration of energy scales
ISO%IEC 15474-1:2002
!nformation technology. &D!> framework. "verview
ISO%IEC 15474-2:2002
!nformation technology. &D!> framework. 0odelling and e/tensi$ility
ISO%IEC 15475-1:2002
!nformation technology. &D!> transfer format. General rules for synta/es and encodings
ISO%IEC 15475-2:2002
!nformation technology. &D!> transfer format. Synta/ SF?-38.)
ISO%IEC 15475-3:2002
!nformation technology. &D!> transfer format. <ncoding <?&"D!?G.)
ISO%IEC 15476-1:2002
!nformation technology. &D!> semantic metamodel. >oundation
ISO%IEC 15476-2:2002
!nformation technology. &D!> semantic metamodel. &ommon
ISO 15480:1999
1e/agon washer head drilling screws with tapping screw thread
ISO 15481:1999
&ross recessed pan head drilling screws with tapping screw thread
ISO 15482:1999
&ross recessed countersunk head drilling screws with tapping screw thread
ISO 15483:1999
&ross recessed raised countersunk head drilling screws with tapping screw thread
ISO 15487:2001
-e/tiles. 0ethod for assessing appearance of apparel and other te/tile end products after
domestic washing and drying
ISO 15489-1:2001
!nformation and documentation. #ecords management. General
ISO 15490:2000
>ine ceramics (advanced ceramics% advanced technical ceramics). -est method for tensile
strength of monolithic ceramics at room temperature
ISO 15494:2003
Plastics piping systems for industrial applications. Poly$utene (PB)% polyethylene (P<) and
polypropylene (PP). Specifications for components and the system. 0etric series
ISO%IEC 15504-1:1998
!nformation technology. Software process assessment. &oncepts and introductory guide
ISO%IEC &' 15504-2:1998
!nformation technology. Software process assessment. 3 reference model for processes and
process capa$ility
ISO%IEC &' 15504-3:1998
!nformation technology. Software process assessment. Performing an assessment
ISO%IEC &' 15504-4:1998
!nformation technology. Software process assessment. Guide to performing assessments
ISO%IEC &' 15504-5:1999
!nformation technology. Software process assessment. 3n assessment model and indicator
guidance
ISO%IEC &' 15504-6:1998
!nformation technology. Software process assessment. Guide to competency of assessors
ISO%IEC &' 15504-7:1998
!nformation technology. Software process assessment. Guide for use in process improvement
ISO%IEC &' 15504-8:1998
!nformation technology. Software process assessment. Guide for use in determining supplier
process capa$ility
ISO%IEC &' 15504-9:1998
!nformation technology. Software process assessment. 7oca$ulary
ISO 15509:2001
3dhesives. Determination of the $ond strength of engineering-plastic +oints
ISO 15512:1999
Plastics. Determination of water content
ISO 15513:2000
&ranes. &ompetency re=uirements for crane drivers (operators)% slingers% signallers and assessors
ISO 15528:2000
Paints% varnishes and raw materials for paints and varnishes. Sampling
ISO 15529:1999
"ptics and optical instruments. "ptical transfer function. Principles of measurement of modular
transfer function (0->) of sampled imaging systems
ISO 15535:2003
General re=uirements for esta$lishing anthropometric data$ases
ISO 15540:2001
Ships and marine technology. >ire resistance of hose assem$lies. -est methods
ISO 15541:2001
Ships and marine technology. >ire resistance of hose assem$lies. #e=uirements for the test $ench
ISO 15544:2000
Petroleum and natural gas industries. "ffshore production installations. #e=uirements and
guidelines for emergency response
ISO 15546:2002
Petroleum and natural gas industries. 3luminium alloy drill pipe
ISO 15547:2001
Petroleum and natural gas industries. Plate heat e/changers
ISO 15550:2002
!nternal com$ustion engines. Determination and method for the measurement of engine power.
General re=uirements
ISO 15554:1998
Practice for dosimetry in gamma irradiation facilities for food processing
ISO 15555:1998
Practice for use of a ceric-cerous sulfate dosimetry system
ISO 15556:1998
Guide for selection and cali$ration of dosimetry systems for radiation processing
ISO 15557:1998
Practice for use of a radiochromic film dosimetry system
ISO 15558:1998
Practice for use of a polymethylmethacrylate dosimetry system
ISO 15559:1998
Practice for use of a radiochromic optical waveguide dosimetry system
ISO 15560:1998
Practice for characteri.ation and performance of a high-dose radiation dosimetry cali$ration
la$oratory
ISO 15561:1998
Practice for use of a dichromate dosimetry system
ISO 15562:1998
Practice for dosimetry in electron and $remsstrahlung irradiation facilities for food processing
ISO 15563:1998
Practice for use of the ethanol-chloro$en.ene dosimetry system
ISO 15564:1998
Guide for use of radiation-sensitive indicators
ISO 15565:1998
Practice for use of a radiochromic li=uid dosimetry system
ISO 15566:1998
Practice for use of the alanine-<P# dosimetry system
ISO 15567:1998
Practice for dosimetry in an 8-ray ($remsstrahlung) facility for radiation processing
ISO 15568:1998
Practice for use of calorimetric dosimetry systems for electron $eam dose measurements and
dosimeter cali$rations
ISO 15569:1998
Practice for dosimetry in an electron-$eam facility for radiation processing at energies $etween
'AA ke7 and @( 0e7
ISO 15570:1998
Practice for use of cellulose acetate dosimetry system
ISO 15571:1998
Practice for dosimetry in a gamma irradiation facility for radiation processing
ISO 15572:1998
Guide for estimating uncertainties in dosimetry for radiation processing
ISO 15573:1998
Practice for dosimetry in an electron-$eam facility for radiation processing at energies $etween
,A ke7 and 'AA ke7
ISO%IEC &' 15580:2001
!nformation technology. Programming languages. >ortran. >loating-point e/ception handling
ISO%IEC &' 15581:2001
!nformation technology. Programming languages. >ortran. <nhanced data type facilities
ISO 15584:2001
Small craft. !n$oard petrol engines. <ngine-mounted fuel and electrical components
ISO 15587-1:2002
;ater =uality. Digestion for the determination of selected elements in water. 3=ua regia
digestion
ISO 15587-2:2002
;ater =uality. Digestion for the determination of selected elements in water. ?itric acid
digestion
ISO 15592-1:2001
>ine-cut to$acco and smoking articles made from it. 0ethods of sampling% conditioning and
analysis. Sampling
ISO 15592-2:2001
>ine-cut to$acco and smoking articles made from it. 0ethods of sampling% conditioning and
analysis. 3tmosphere for conditioning and testing
ISO 15592-3:2003
>ine-cut to$acco and smoking articles made from it. 0ethods of sampling% conditioning and
analysis. Determination of total particulate matter of smoking articles using a routine analytical
smoking machine% preparation for the determination of water and nicotine% and calculation of
nicotine-free dry particulate matter
ISO 15593:2001
<nvironmental to$acco smoke. <stimation of its contri$ution to respira$le suspended particles.
Determination of particulate matter $y ultraviolet a$sor$ance and $y fluorescence
ISO 15600:2000
-ools for moulding. -hermal insulating sheets for in+ection moulds
ISO 15606:2000
Dental handpieces. 3ir-powered scalers and scaler tips
ISO 15609-2:2001
Specification and =ualification of welding procedures for metallic materials. ;elding procedure
specification. Gas welding
ISO 15614-8:2002
Specification and =ualification of welding procedures for metallic materials. ;elding procedure
test. ;elding of tu$es to tu$e-plate +oints
ISO 15614-11:2002
Specification and =ualification of welding procedures for metallic materials. ;elding procedure
test. <lectron and laser $eam welding
ISO 15615:2002
Gas welding e=uipment. 3cetylene manifold systems for welding% cutting and allied processes.
Safety re=uirements in high-pressure devices
ISO 15616-1:2003
3cceptance tests for &"Bd@- laser $eam machines for high =uality welding and cutting. General
principles% acceptance conditions
ISO 15616-2:2003
3cceptance tests for &"Bd@- laser $eam machines for high =uality welding and cutting.
0easurement of static and dynamic accuracy
ISO 15616-3:2003
3cceptance tests for &"Bd@- laser $eam machines for high =uality welding and cutting.
&ali$ration of instruments for measurement of gas flow and pressure
ISO 15618-1:2002
9ualification testing of welders for under-water welding. Diver-welders for hyper$aric wet
welding
ISO 15618-2:2002
9ualification testing of welders for under-water welding. Diver-welders and welding operators
for hyper$aric dry welding
ISO 15620:2000
;elding. >riction welding of metallic materials
ISO 15621:1999
Drine-a$sor$ing aids. General guidance on evaluation
ISO 15629:2002
Pallets for materials handling. 9uality of fasteners for assem$ly of new and repair of used% flat%
wooden pallets
ISO 15630-1:2002
Steel for the reinforcement and prestressing of concrete. -est methods. #einforcing $ars% wire
rod and wire
ISO 15630-2:2002
Steel for the reinforcement and prestressing of concrete. -est methods. ;elded fa$ric
ISO 15630-3:2002
Steel for the reinforcement and prestressing of concrete. -est methods. Prestressing steel
ISO 15632:2002
0icro$eam analysis. !nstrumental specification for energy dispersive 8-ray spectrometers with
semiconductor detectors
ISO 15637-1:2002
1olding fi/tures of cylindrical a$rasive sleeves. 1olding fi/tures with shank for hand-held
grinding machines
ISO 15637-2:2002
1olding fi/tures of cylindrical a$rasive sleeves. 1olding fi/tures for stationary machines
ISO 15641:2001
0illing cutters for high speed machining. Safety re=uirements
ISO 15643:2002
#oad construction and maintenance e=uipment. Bituminous $inder spreaderssprayers.
-erminology and commercial specifications
ISO 15644:2002
#oad construction and maintenance e=uipment. &hippings spreaders. -erminology and
commercial specifications
ISO 15645:2002
#oad construction and maintenance e=uipment. #oad milling machinery. -erminology and
commercial specifications
ISO 15649:2001
Petroleum and natural gas industries. Piping
ISO 15663-1:2000
Petroleum and natural gas industries. 2ife cycle costing. 0ethodology
ISO 15663-2:2001
Petroleum and natural gas industries. 2ife cycle costing. Guidance on application of
methodology and calculation methods
ISO 15663-3:2001
Petroleum and natural gas industries. 2ife cycle costing. !mplementation guidelines
ISO 15664:2001
3coustics. ?oise control design procedures for open plant
ISO 15665:2003
3coustics. 3coustic insulation for pipes% valves and flanges
ISO 15667:2000
3coustics. Guidelines for noise control $y enclosures and ca$ins
ISO 15668:1999
Banking. Secure file transfer (retail)
ISO 15671:2000
#u$$er and ru$$er additives. Determination of total sulfur content using an automatic analyser
ISO 15672:2000
#u$$er and ru$$er additives. Determination of total nitrogen content using an automatic analyser
ISO 15674:2001
&ardiovascular implants and artificial organs. 1ard-shell cardiotomyvenous reservoir systems
(withwithout filter) and soft venous reservoir $ags
ISO 15675:2001
&ardiovascular implants and artificial organs. &ardiopulmonary $ypass systems. 3rterial line
$lood filters
ISO 15682:2001
;ater =uality. Determination of chloride $y flow analysis (&>3 and >!3) and photometric or
potentiometric detection
ISO 15686-1:2000
Buildings and constructed assets. Service life planning. General principles
ISO 15686-2:2001
Buildings and constructed assets. Service life planning. Service life prediction procedures
ISO 15686-3:2002
Buildings and constructed assets. Service life planning. Performance audits and reviews
ISO%IEC 15693-1:2000
!dentification cards. &ontactless integrated circuit(s) cards. 7icinity cards. Physical
characteristics
ISO%IEC 15693-2:2000
!dentification cards. &ontactless integrated circuit(s) cards. 7icinity cards. 3ir interface and
initiali.ation
ISO%IEC 15693-3:2001
!dentification cards. &ontactless integrated circuit(s) cards. 7icinity cards. 3nticollision and
transmission protocol
ISO 15695:2001
7itreous and porcelain enamels. Determination of scratch resistance of enamel finishes
ISO 15700:1999
2eather. -ests for colour fastness. &olour fastness to water spotting
ISO 15701:1999
2eather. -ests for colour fastness. &olour fastness to migration into plastici.ed poly (vinyl
chloride)
ISO 15702:2000
2eather. -ests for colour fastness. &olour fastness to machine washing
ISO 15703:1999
2eather. -ests for colour fastness. &olour fastness to mild washing
ISO 15705:2002
;ater =uality. Determination of the chemical o/ygen demand inde/ (S--&"D). Small-scale
sealed-tu$e method
ISO 15706:2002
!nformation and documentation. !nternational Standard 3udiovisual ?um$er (!S3?)
ISO 15707:2001
!nformation and documentation. !nternational standard musical work code (!S;&)
ISO 15710:2002
Paints and varnishes. &orrosion testing $y alternate immersion in and removal from a $uffered
sodium chloride solution
ISO 15715:2003
Binders for paints and varnishes. Determination of tur$idity
ISO 15720:2001
0etallic coatings. Porosity tests. Porosity in gold or palladium coatings on metal su$strates $y
gel-$ulk electrography
ISO 15721:2001
0etallic coatings. Porosity tests. Porosity in gold or palladium coatings $y sulfurous acidsulfur
dio/ide vapour
ISO 15724:2001
0etallic and other inorganic coatings. <lectrochemical measurement of diffusi$le hydrogen in
steels. Barnacle electrode method
ISO 15730:2000
0etallic and other inorganic coatings. <lectropolishing as a means of smoothing and passivating
stainless steel
ISO 15734:2001
Ships and marine technology. 1ydrostatic release units
ISO 15738:2002
Ships and marine technology. Gas inflation systems for inflata$le life-saving appliances
ISO 15739:2003
Photography. <lectronic still-picture imaging. ?oise measurements
ISO 15741:2001
Paints and varnishes. >riction-reduction coatings for the interior of on- and offshore steel
pipelines for non-corrosive gases
ISO 15744:2002
1and-held non-electric power tools. ?oise measurement code. <ngineering method (grade @)
ISO 15748-1:2002
Ships and marine technology. Pota$le water supply on ships and marine structures. Planning and
design
ISO 15748-2:2002
Ships and marine technology. Pota$le water supply on ships and marine structures. 0ethod of
calculation
ISO 15750-1:2002
Packaging. Steel drums. #emova$le head (open head) drums with a minimum total capacity of
@A, l% @)A l and @)*%( l
ISO 15750-2:2002
Packaging. Steel drums. ?on-remova$le head (tight head) drums with a minimum total capacity
of )@) l% @)*%( l and @'A l
ISO 15750-3:2002
Packaging. Steel drums. !nserted flange-type closure systems
ISO 15752:2000
"phthalmic instruments. <ndoilluminators. >undamental re=uirements and test methods for
optical radiation safety
ISO 15755:2000
Paper and $oard. <stimation of contraries
ISO 15761:2002
Steel gate% glo$e and check valves for si.es D? )AA and smaller% for the petroleum and natural
gas industries
ISO 15767:2003
;orkplace atmospheres. &ontrolling and characteri.ing errors in weighing collected aerosols
ISO%&S 15768:2000
0easurement of li=uid velocity in open channels. Design% selection and use of electromagnetic
current meters
ISO%&S 15769:2000
1ydrometric determination. 2i=uid flow in open channels and partly filled pipes. Guidelines for
the application of Doppler-$ased flow measurements
ISO%IEC 15773:1998
!nformation technology. -elecommunications and information e/change $etween systems.
Broad$and private integrated services network. !nter-e/change signalling protocol. -ransit
counter additional network feature
ISO 15774:2001
3nimal and vegeta$le fats and oils. Determination of cadmium content $y direct graphite furnace
atomic a$sorption spectrometry
ISO 15783:2003
Seal-less rotodynamic pumps. &lass !!. Specification
ISO 15785:2002
-echnical drawings. Sym$olic presentation and indication of adhesive fold and pressed +oints
ISO 15788-1:2001
3nimal and vegeta$le fats and oils. Determination of stigmastadienes in vegeta$le oils. 0ethod
using capillary-column gas chromatography (#eference method)
ISO 15791-1:2002
Plastics. Development and use of intermediate-scale fire tests for plastics products. General
guidance
ISO 15794:2001
Bi-directional and multi-directional fork-lift trucks. Sta$ility tests
ISO 15795:2002
"ptics and optical instruments. 9uality evaluation of optical systems. 3ssessing the image
=uality degradation due to chromatic a$errations
ISO 15797:2002
-e/tiles. !ndustrial washing and finishing procedures for testing of workwear
ISO 15798:2001
"phthalmic implants. "phthalmic viscosurgical devices
ISO%IEC 15802-1:1995
!nformation technology. -elecommunications and information e/change $etween systems. 2ocal
and metropolitan area networks - common specifications. 0edium 3ccess &ontrol (03&)
service definition
ISO%IEC 15802-2:1995
!nformation technology. -elecommunications and information e/change $etween systems. 2ocal
and metropolitan area networks - common specifications. 23?03? management
ISO%IEC 15802-4:1994
!nformation technology. -elecommunications and information e/change $etween systems. 2ocal
and metropolitan area networks - common specifications. System load protocol
ISO%IEC 15802-5:1998
!nformation technology. -elecommunications and information e/change $etween systems. 2ocal
and metropolitan area networks - common specifications. #emote media access control (03&)
$ridging
ISO%IEC &' 15846:1998
!nformation technology. Software life cycle processes. &onfiguration management
ISO 15849:2001
Ships and marine technology. Guidelines for implementation of a fleet management system
network
ISO 15850:2002
Plastics. Determination of tension-tension fatigue crack propagation. 2inear elastic fracture
mechanics (2<>0) approach
ISO%IEC 15852:1999
!nformation technology. Programming languages. 0 ;indowing 3P!
ISO 15870:2000
Powered industrial trucks. Safety signs and ha.ard pictorials. General principles
ISO 15871:2000
!ndustrial trucks. Specification for indicator lights for container handling and grappler arm
operations
ISO 15872:2002
3erospace. D?5 threads. Gauging
ISO 15882:2003
Sterili.ation of health care products. &hemical indicators. Guidance for selection% use and
interpretation of results
ISO 15884:2002
0ilk fat. Preparation of fatty acid methyl esters
ISO 15889:2003
Space data and information transfer systems. Data description language. <3S- specification
ISO%IEC 15897:1999
!nformation technology. Procedures for registration of cultural elements
ISO%IEC 15899:1998
!nformation technology. -elecommunications and information e/change $etween systems.
Broad$and private integrated services network. Service description. Broad$and connection
oriented $earer services
ISO 15903:2002
Soil =uality. >ormat for recording soil and site information
ISO 15908:2002
3dhesives for thermoplastic piping systems. -est method for the determination of thermal
sta$ility of adhesives
ISO%IEC 15910:1999
!nformation technology. Software user documentation process
ISO 15911:2000
0ethods of test for petroleum and its products. <stimation of net specific energy of aviation
tur$ine fuels using hydrogen content data
ISO 15913:2003
;ater =uality. Determination of selected pheno/yalkanoic her$icides% including $enta.ones and
hydro/y$en.onitriles $y gas chromatography and mass spectrometry after solid phase e/traction
and derivati.ation
ISO 15929:2002
Graphic technology. Prepress digital data e/change. Guidelines and principles for the
development of PD>8 standards
ISO 15930-1:2001
Graphic technology. Prepress digital data e/change. Dse of PD>. &omplete e/change using
&0FG data (PD>8-)) and PD>8-)a)
ISO%IEC 15939:2002
Software engineering. Software measurement process
ISO%IEC &' 15942:2000
!nformation technology. Programming languages. Guide for the use of the 3da programming
language in high integrity systems
ISO%IEC 15944-1:2002
!nformation technology. Business agreement semantic descriptive techni=ues. "perational
aspects of "pen-edi for implementation
ISO%IEC 15945:2002
!nformation technology. Security techni=ues. Specification of --P services to support the
application of digital signatures
ISO%IEC 15946-1:2002
!nformation technology. Security techni=ues. &ryptographic techni=ues $ased on elliptic curves.
General
ISO%IEC 15946-2:2002
!nformation technology. Security techni=ues. &ryptographic techni=ues $ased on elliptic curves.
Digital signatures
ISO%IEC 15946-3:2002
!nformation technology. Security techni=ues. &ryptographic techni=ues $ased on elliptic curves.
Gey esta$lishment
ISO%IEC &' 15947:2002
!nformation technology. Security techni=ues. !- intrusion detection framework
DD ISO%&' 15969:2001
Surface chemical analysis. Depth profiling. 0easurement of sputtered depth
ISO 15973:2001
&losed and $lind rivets with $reak pull mandrel and protruding head. 3!3St
ISO 15974:2001
&losed and $lind rivets with $reak pull mandrel and countersunk head. 3!3St
ISO 15975:2002
&losed end $lind rivets with $reak pull mandrel and protruding head. 3!3!3
ISO 15976:2002
&losed end $lind rivets with $reak pull mandrel and protruding head. StSt
ISO 15977:2002
"pen end $lind rivets with $reak pull mandrel and protruding head. 3!3St
ISO 15978:2002
"pen end $lind rivets with $reak pull mandrel and countersunk head. 3!3St
ISO 15979:2002
"pen end $lind rivets with $reak pull mandrel and protruding head. StSt
ISO 15980:2002
"pen end $lind rivets with $reak pull mandrel and countersunk head. StSt
ISO 15981:2002
"pen end $lind rivets with $reak pull mandrel and protruding head. 3!33!3
ISO 15982:2002
"pen end $lind rivets with $reak pull mandrel and countersunk head. 3!33!3
ISO 15983:2002
"pen end $lind rivets with $reak pull mandrel and protruding head. 3@3@
ISO 15984:2002
"pen end $lind rivets with $reak pull mandrel and countersunk head. 3@3@
ISO 15987:2003
Plastics. >ilm and sheeting. Bia/ially oriented polyamide (nylon) films
ISO 15988:2003
Plastics. >ilm and sheeting. Bia/ially oriented poly(ethylene terephthalate) (P<-) films
ISO 16000-3:2001
!ndoor air. Determination of formaldehyde and other car$onyl compounds. 3ctive sampling
method
ISO 16014-1:2003
Plastics. Determination of average molecular mass and molecular mass distri$ution of polymers
using si.e-e/clusion chromatography. General principles
ISO 16014-2:2003
Plastics. Determination of average molecular mass and molecular mass distri$ution of polymers
using si.e-e/clusion chromatography. Dniversal cali$ration method
ISO 16014-3:2003
Plastics. Determination of average molecular mass and molecular mass distri$ution of polymers
using si.e-e/clusion chromatography. 2ow-temperature method
ISO 16014-4:2003
Plastics. Determination of average molecular mass and molecular mass distri$ution of polymers
using si.e-e/clusion chromatography. 1igh-temperature method
ISO 16016:2000
-echnical product documentation. Protection notices for restricting the use of documents and
products
ISO 16017-1:2001
!ndoor% am$ient and workplace air. Sampling and analysis of volatile organic compounds $y
sor$ent tu$ethermal desorptioncapillary gas chromatography. Pumped sampling
ISO 16017-2:2003
!ndoor% am$ient and workplace air. Sampling and analysis of volatile organic compounds $y
sor$ent tu$ethermal desorptioncapillary gas chromatography. Diffusive sampling
ISO 16021:2001
Drine-a$sor$ing aids. Basic principles for evaluation of single-use adult-incontinence-a$sor$ing
aids from the perspective of users and caregivers
ISO%IEC 16022:2000
!nformation technology. !nternational sym$ology specification. Data matri/
ISO%IEC 16023:2000
!nformation technology. !nternational sym$ology specification. 0a/icode
ISO 16028:1999
1ydraulic fluid power. >lush-face type% =uick-action couplings for use at pressures of @A 0Pa
(@AA $ar) to ')%( 0Pa (')( $ar). Specifications
ISO 16030:2001
Pneumatic fluid power. &onnections. Ports and stud ends
ISO 16035:2003
3nimal and vegeta$le fats and oils. Determination of low-$oiling halogenated hydrocar$ons in
edi$le oils
ISO 16048:2003
Passivation of corrosion-resistant stainless-steel fasteners
ISO 16049-1:2001
3ir cargo e=uipment. #estraint straps. Design criteria and testing methods
ISO 16054:2002
!mplants for surgery. 0inimum data sets for surgical implants
ISO 16057:2002
&oated a$rasives. 7ulcani.ed fi$re discs
ISO 16063-1:1998
0ethods for the cali$ration of vi$ration and shock transducers. Basic concepts
ISO 16063-11:1999
0ethods for the cali$ration of vi$ration and shock transducers. Primary vi$ration cali$ration $y
laser interferometry
ISO 16063-12:2002
0ethods for the cali$ration of vi$ration and shock transducers. Primary vi$ration cali$ration $y
the reciprocity method
ISO 16063-13:2001
0ethods for the cali$ration of vi$ration and shock transducers. Primary shock cali$ration using
laser interferometry
ISO 16063-21:2003
0ethods for the cali$ration of vi$ration and shock transducers. 7i$ration cali$ration $y
comparison to a reference transducer
ISO 16065-1:2001
Pulps. Determination of fi$re length $y automated optical analysis. Polari.ed light method
ISO 16070:2002
Petroleum and natural gas industries. Downhole e=uipment. 2ock mandrels and landing nipples
ISO 16072:2002
Soil =uality. 2a$oratory methods for determination of micro$ial soil respiration
ISO 16091:2002
Space systems. !ntegrated logistic support
ISO 16104:2003
Packaging. -ransport packaging for dangerous goods. -est methods
ISO 16107:1999
;orkplace atmospheres. Protocol for evaluating the performance of diffusive samplers
ISO 16140:2003
0icro$iology of food and animal feeding stuffs. Protocol for the validation of alternative
methods
DD ISO%&' 16144:2002
1ydraulic fluid power. &ali$ration of li=uid automatic particle counters. Procedures used to
certify the standard reference material S#0 @,A*
ISO 16147:2002
Small craft. !n$oard diesel engines. <ngine-mounted fuel and electrical components
ISO 16165:2001
Ships and marine technology. 0arine environment protection. -erminology relating to oil spill
response
ISO 16221:2001
;ater 9uality. Guidance for determination of $iodegrada$ility in the marine environment
ISO%IEC 16262:2002
!nformation technology. <&03Script language specification
ISO 16264:2002
;ater =uality. Determination of solu$le silicates $y flow analysis (>!3 and &>3) and
photometric detection
ISO 16284:2001
"phthalmic optics. !nformation interchange for ophthalmic optical e=uipment
ISO%IEC 16326:1999
Software engineering. Guide for the application of !S"!<& )@@A: to pro+ect management
ISO 16329:2003
Ships and marine technology. 1eading control systems for high-speed craft
ISO 16330:2003
#eciprocating positive displacement pumps and pump units. -echnical re=uirements
ISO 16348:2003
0etallic and other inorganic coatings. Definitions and conventions concerning appearance
ISO 16366:2001
-ools for pressing. 2-shaped guides
ISO 16367:2001
-ools for pressing. Guide plates. D- and 7-$locks
ISO%&' 16386:1999
!mpact of changes in !S" fluid power particle counting. &ontamination control and filter test
standards
ISO%IEC 16388:1999
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code
sym$ology specifications. &ode 'E
ISO%IEC 16390:1999
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code
sym$ology specifications. !nterleaved @ of (
ISO 16426:2002
>asteners. 9uality assurance system
ISO 16446:2002
Ships and marine technology. 0arine environmental protection. 3daptor for +oining dissimilar
$oom connectors
ISO 16565:2002
#u$$er. Determination of (-ethylidenenor$ornene (<?B) or dicyclopentadiene (D&PD) in
ethylene-propylene-diene (<PD0) terpolymers
ISO 16582:2002
"pen end $lind rivets with $reak pull mandrel and protruding head. &uSt or &uBr or &uSSt
ISO 16583:2002
"pen end $lind rivets with $reak pull mandrel and countersunk head. &uSt or &uBr or &uSSt
ISO 16584:2002
"pen end $lind rivets with $reak pull mandrel and protruding head. ?i&uSt or ?i&uSSt
ISO 16585:2002
&losed end $lind rivets with pull mandrel and protruding head. 3@SSt
ISO 16588:2002
;ater =uality. Determination of si/ comple/ing agents. Gas-chromatographic method
ISO 16589-1:2001
#otary shaft lip-type seals incorporating thermoplastic sealing elements. ?ominal dimensions
and tolerances
ISO 16589-2:2001
#otary shaft lip-type seals incorporating thermoplastic sealing elements. 7oca$ulary
ISO 16589-3:2001
#otary shaft lip-type seals incorporating thermoplastic sealing elements. Storage% handling and
installation
ISO 16589-4:2001
#otary shaft lip-type seals incorporating thermoplastic sealing elements. Performance test
procedures
ISO 16589-5:2001
#otary shaft lip-type seals incorporating thermoplastic sealing elements. !dentification of visual
imperfections
DD ISO%&S 16628:2003
-racheo$ronchial tu$es. #ecommendations for si.e designation and la$elling
ISO 16649-1:2001
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of BG$-
glucuronidase-positive B:!<scherichia coliB:#. &olony-count techni=ue at CCBAD& using
mem$ranes and (-$romo-C- chloro-'-indolyl-BG$-D-glucuronide
ISO 16649-2:2001
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of BG$-
glucuronidase-positive B:!<scherichia coliB:#. &olony-count techni=ue at CCBAD& using (-
$romo-C-chloro-'-indolyl-BG$-D-glucuronide
ISO 16654:2001
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the detection of
B:!<scherichia coliB:# ")(:
ISO 16663-1:2003
>ishing nets. 0ethod of test for the determination of mesh si.e. "pening of mesh
ISO 16663-2:2003
>ishing nets. 0ethod of test for the determination of mesh si.e. 2ength of mesh
DD ISO%&S 16668:2000
Basic semantics register (BS#)
ISO 16672:2003
"phthalmic implants. "cular endotamponades
ISO 16702:2001
;orkplace air =uality. Determination of total isocyanate groups in air using @-()-
metho/yphenyl) pipera.ine and li=uid chromatography
ISO%&S 16799:1999
#olling $earings. Dynamic load ratings and rating life. Discontinuities in the calculating of $asic
dynamic load ratings
ISO 16869:2001
Plastics. 3ssessment of the effectiveness of fungistatic compounds in plastics formulations
ISO 16871:2003
Plastics piping and ducting systems. Plastics pipes and fittings. 0ethod for e/posure to direct
(natural) weathering
ISO 16873:2002
1ydraulic fluid power. Pressure switches. 0ounting surfaces
ISO 16889:1999
1ydraulic fluid power filters. 0ulti-pass method for evaluating filtration performance of a filter
element
ISO 16902-1:2003
1ydraulic fluid power. -est code for the determination of sound power levels using sound
intensity techni=ues. <ngineering method. Pumps
ISO%&S 16922:2002
?atural gas. Guidelines for odori.ing gases
ISO 16929:2002
Plastics. Determination of the degree of disintegration of plastic materials under defined
composting conditions in a pilot-scale test
ISO 16931:2001
3nimal and vegeta$le fats and oils. Determination of polymeri.ed triglycerides content $y high
performance si.e-e/clusion chromatography (1PS<&)
ISO%IEC 17024:2003
&onformity 3ssessment. General re=uirements for $odies operating certification of persons
ISO%IEC 17025:2000
General re=uirements for the competence of testing and cali$ration la$oratories
DD ISO%&S 17090-1:2002
1ealth informatics. Pu$lic key infrastructure. >ramework and overview
DD ISO%&S 17090-2:2002
1ealth informatics. Pu$lic key infrastructure. &ertificate profile
DD ISO%&S 17090-3:2002
1ealth informatics. Pu$lic key infrastructure. Policy management of certification authority
DD ISO%&S 17117:2002
1ealth informatics. &ontrolled health terminology. Structure and high-level indicators
ISO 17155:2002
Soil =uality. Determination of a$undance and activity of soil microflora using respiration curves
ISO 17166:1999
<rythema reference action spectrum and standard erythema dose
ISO 17186:2002
2eather. Physical and mechanical tests. Determination of surface coating thickness
ISO 17202:2002
-e/tiles. Determination of twist in single spun yarns. Dntwistretwist method
DD CE! ISO%&S 17226:2003
2eather. &hemical tests. Determination of formaldehyde content
ISO 17227:2002
2eather. Physical and mechanical tests. Determination of dry heat resistance of leather
ISO 17229:2002
2eather. Physical and mechanical tests. Determination of water vapour a$sorption
ISO 17233:2002
2eather. Physical and mechanical tests. Determination of cold crack temperature of surface
coatings
DD CE! ISO%&S 17234:2003
2eather. &hemical tests. Determination of certain a.o colourants in dyed leathers
ISO 17235:2002
2eather. Physical and mechanical tests. Determination of softness
ISO 17236:2002
2eather. Physical and mechanical tests. Determination of e/tension set
DD CE! ISO%&S 17262:2003
3utomatic vehicle and e=uipment identification. !ntermodal goods transport. ?um$ering and
data structures
DD CE! ISO%&S 17263:2003
3utomatic vehicle and e=uipment identification. !ntermodal goods transport. System parameters
ISO 17266:2002
&inematography. 0ultichannel analogue and digital photographic sound and control records on
'( mm motion-picture prints and negatives% and digital sound-control records on :A mm motion-
picture prints and negatives. Position and width dimensions
ISO 17281:2002
Plastics. Determination of fracture toughness (BiGBdiBdc and BiGBdiBdc) at moderately high
loading rates () ms)
ISO 17287:2003
#oad vehicles. <rgonomic aspects of transport information and control systems. Procedure for
assessing suita$ility for use while driving
ISO 17288-1:2002
Passenger cars. >ree-steer $ehaviour. Steering-release open-loop test method
ISO 17332:2001
&inematography. 0anufacturer printed latent image identification information for '(mm
motion-picture colour-print film. Specifications
ISO 17339:2002
Ships and marine technology. Sea anchors for survival craft and rescue $oats
ISO 17355:2003
Space data and information transfer systems. &&SDS file delivery protocol
ISO 17357:2002
Ships and marine technology. 1igh-pressure floating pneumatic ru$$er fenders
ISO 17410:2001
0icro$iology of food and animal feeding stuffs. 1ori.ontal method for the enumeration of
psychrotrophic micro-organisms
ISO 17422:2002
Plastics. <nvironmental aspects. General guidelines for their inclusion in standards
ISO 17433:2003
Space data and information transfer systems. Packet telemetry services
ISO 17493:2000
&lothing and e=uipment for protection against heat. -est method for convective heat resistance
using a hot air circulating oven
ISO 17495:2003
;ater =uality. Determination of selected nitrophenols. 0ethod $y solid-phase e/traction and gas
chromatography with mass spectrometric detection
ISO 17510-1:2002
Sleep apnoea $reathing therapy. Sleep apnoea $reathing therapy devices
ISO 17510-2:2003
Sleep apnoea $reathing therapy. 0asks and application accessories
ISO 17511:2003
!n vitro diagnostic medical devices. 0easurement of =uantities in $iological samples.
0etrological tracea$ility of values assigned to cali$rators and control materials
ISO 17526:2003
"ptics and optical instruments. 2asers and laser-related e=uipment. 2ifetime of lasers
ISO 17531:2002
Photography. Processing chemicals. Specifications for C-(?-ethyl-?-@-
methanesulfonylaminoethyl)-@-methylphenylenediamine ses=uisulfate monohydrate
ISO 17560:2002
Surface chemical analysis. Secondary-ion mass spectrometry. 0ethod for depth profiling of
$oron in silicon
ISO 17564:2001
?itrile ru$$er. Determination of residual unsaturation in hydrogenated nitrile ru$$er (1?B#) $y
iodine value
DD CE! ISO%&S 17573:2003
#oad transport and traffic telematics. <lectronic fee collection (<>&). System architecture for
vehicle related transport services
ISO 17631:2002
Ships and marine technology. Ship$oard plans for fire protection% life-saving appliances and
means of escape
ISO 17652-1:2003
;elding. -est for shop primers in relation to welding and allied processes. General re=uirements
ISO 17652-2:2003
;elding. -est for shop primers in relation to welding and allied processes. ;elding properties of
shop primers
ISO 17652-3:2003
;elding. -est for shop primers in relation to welding and allied processes. -hermal cutting
ISO 17652-4:2003
;elding. -est for shop primers in relation to welding and allied processes. <mission of fumes
and gases
ISO 17653:2003
Destructive tests on welds in metallic materials. -orsion test of resistance spot welds
ISO 17654:2003
Destructive tests on welds in metallic materials. #esistance welding. Pressure test on resistance
seam welds
ISO 17655:2003
Destructive tests on welds in metallic materials. 0ethod for taking samples for delta ferrite
measurement
ISO 17666:2003
Space systems. #isk management
ISO 17710:2002
Plastics. Polyols for use in the production of polyurethane. Determination of degree of
unsaturation $y microtitration
ISO 17724:2003
Graphical sym$ols. 7oca$ulary
DD ISO%&S 17764-1:2002
3nimal feeding stuffs. Determination of the content of fatty acids. Preparation of methyl esters
ISO 17771:2003
Plastics. -hermoset moulding compounds. Determination of the degree of fi$re wetting in S0&
ISO 17776:2002
Petroleum and natural gas industries. "ffshore production installations. Guidance on tools and
techni=ues for ha.ard identification and risk assessment
ISO%IEC 17799:2000
!nformation technology. &ode of practice for information security management
ISO 17900:2002
3gricultural trailers. Balanced and semi-mounted trailers. Determination of payload% vertical
static load and a/le load
ISO 17973:2002
Surface chemical analysis. 0edium-resolution 3uger electron spectrometers. &ali$ration of
energy scales for elemental analysis
ISO 17974:2002
Surface chemical analysis. 1igh-resolution 3uger electron spectrometers. &ali$ration of energy
scales for elemental and chemical-state analysis
ISO%"AS 17984:2001
0achine-made te/tile floor coverings. Determination of dimensional changes after e/posure to
heat andor water
ISO 17993:2002
;ater =uality. Determination of )( polycyclic aromatic hydrocar$ons (P31) in water $y 1P2&
with fluorescence detection after li=uid-li=uid e/traction
ISO%IEC 18004:2000
!nformation technology. 3utomatic identification and data capture techni=ues. Bar code
sym$ology. 9# &ode
ISO%IEC 18009:1999
!nformation technology. Programming languages. 3da6 conformity assessment of a language
processor
ISO%IEC 18014-1:2002
!nformation technology. Security techni=ues. -ime-stamping services. >ramework
ISO%IEC 18014-2:2002
!nformation technology. Security techni=ues. -ime-stamping services. 0echanisms producing
independent tokens
ISO 18114:2003
Surface chemical analysis. Secondary-ion mass spectrometry. Determination of relative
sensitivity factors from ion-implanted reference materials
ISO 18115:2001
Surface chemical analysis. 7oca$ulary
ISO 18153:2003
!n vitro diagnostic medical devices. 0easurement of =uantities in $iological samples.
0etrological tracea$ility of values for catalytic concentration of en.ymes assigned to cali$rators
and control materials
ISO 18165:2001
Petroleum and natural gas industries. Performance testing of cementing float e=uipment
ISO 18330:2003
0ilk and milk products. Guidelines for the standardi.ed description of immunoassays or receptor
assays for the detection of antimicro$ial residues
ISO 18333:2002
Pallets for materials handling. 9uality of new wooden components for flat pallets
ISO 18334:2003
Pallets for materials handling. 9uality of assem$ly of new% wooden% flat pallets
ISO 18413:2002
1ydraulic fluid power. &leanliness of parts and components. !nspection document and principles
related to contaminant collection% analysis and data reporting
ISO 18553:2002
0ethod for the assessment of the degree of pigment or car$on $lack dispersion in polyolefin
pipes% fittings and compounds
ISO 18609:2001
3nimal and vegeta$le fats and oils. Determination of unsaponifia$le matter. 0ethod using
he/ane e/traction
ISO 18738:2003
2ifts (elevators). 0easurement of lift ride =uality
ISO 18812:2003
1ealth informatics. &linical analyser interfaces to la$oratory information systems. Dse profiles
ISO 18901:2002
!maging materials. Processed silver-gelatin type $lack-and-white film. Specifications for sta$ility
ISO 18902:2001
!maging materials. Processed photographic films% plates and papers. >iling enclosures and
storage containers
ISO 18903:2002
!maging materials. >ilms and paper. Determination of dimensional change
ISO 18904:2000
!maging materials. Processed films. 0ethod for determining lu$rication
ISO 18905:2002
!maging materials. 3mmonia-processed dia.o photographic film. Specifications for sta$ility
ISO 18906:2000
!maging materials. Photographic films. Specifications for safety film
ISO 18907:2000
!maging materials. Photographic films and papers. ;edge test for $rittleness
ISO 18908:2000
!maging materials. Photographic film. Determination of folding endurance
ISO 18910:2000
!maging materials. Photographic film and paper. Determination of curl
ISO 18911:2000
Photography. Processed safety photographic films. Storage practices
ISO 18912:2002
!maging materials. Processed vesicular photographic film. Specifications for sta$ility
ISO 18914:2002
!maging materials. Photographic film and papers. 0ethod for determining the resistance of
photographic emulsions to wet a$rasion
ISO 18915:2000
!maging materials. 0ethods for the evaluation of the effectiveness of chemical conversion of
silver images against o/idation
ISO 18917:1999
Photography. Determination of residual thiosulfate and other related chemicals in processed
photographic materials. 0ethods using iodine-amylose% methylene $lue and silver sulfide
ISO 18918:2000
!maging materials. Processed photographic plates. Storage practices
ISO 18919:1999
Photography. -hermally processed silver microfilm. Specifications for sta$ility
ISO 18920:2000
!maging materials. Processed photographic reflection prints. Storage practices
ISO 18921:2002
!maging materials. &ompact discs (&D-#"0). 0ethod for estimating the life e/pectancy $ased
on the effects of temperature and relative humidity
ISO 18922:2003
!maging materials. Processed photographic films. 0ethods for determining scratch resistance
ISO 18923:2000
!maging materials. Polyester-$ase magnetic tape. Storage practices
ISO 18924:2000
!maging materials. -est methods for 3rrhenius type predictions
ISO 18925:2002
!maging materials. "ptical disk media. Storage practices
ISO 18927:2002
!maging materials. #ecorda$le compact disc systems. 0ethod for estimating the life e/pectancy
$ased on the effects of temperature and relative humidity
ISO 18928:2002
!maging materials. Dnprocessed photographic films and papers. Storage practices
ISO 19011:2002
Guidelines for =uality andor environmental management systems auditing
ISO 19011:2002 ,A5 -a).*ate/0
Guidelines for =uality andor environmental management systems auditing. 3( laminated edition
ISO 19101:2002
Geographic information. #eference model
ISO 19105:2000
Geographic information. &onformance and testing
ISO 19107:2003
Geographic information. Spatial schema
ISO 19108:2002
Geographic information. -emporal schema
ISO 19111:2003
Geographic information. Spatial referencing $y coordinates
ISO 19113:2002
Geographic information. 9uality principles
ISO 19115:2003
Geographic information. 0etadata
ISO%&' 19121:2000
Geographic information. !magery and gridded data
ISO 19219:2002
3nimal and vegeta$le fats and oils. Determination of visi$le foots in crude fats and oils
ISO 19378:2003
2u$ricants% industrial oils and related products (class 2). 0achine-tool lu$ricants. &ategories and
specifications
ISO%IEC 19500-2:2003
!nformation technology. "pen distri$uted processing. General !nter-"#B Protocol
(G!"P)!nternet !nter-"#B Protocol (!!"P)
ISO%IEC 19761:2003
Software engineering. &"S0!&->>P. 3 functional si.e measurement method
ISO 19900:2002
Petroleum and natural gas industries. General re=uiremenents for offshore structures
ISO 19901-4:2003
Petroleum and natural gas industries. Specific re=uirements for offshore structures. Geotechnical
and foundation design considerations
ISO 19901-5:2003
Petroleum and natural gas industries. Specific re=uirements for offshore structures. ;eight
control during engineering and construction
ISO 20000:2005
!- Service 0anagement (ref BS)(AAA). #ef6 !S" @AAAA Dser Group
ISO%IEC 20060:2001
!nformation technology. "pen terminal architecture ("-3) specification. 7irtual machine
specification
ISO 20341:2003
Surface chemical analysis. Secondary-ion mass spectrometry. 0ethod for estimating depth
resolution parameters with multiple delta-layer reference materials
ISO 20482:2003
0etallic materials. Sheet and strip. <richsen cupping test
ISO 20823:2003
Petroleum and related products. Determination of the flamma$ility characteristics of fluids in
contact with hot surfaces. 0anifold ignition test
ISO%IEC 20968:2002
Software engineering. 0k !! function point analysis. &ounting practices manual
ISO%IEC 20970:2002
!nformation technology. Programming languages% their environments and system software
interfaces. 5<>> file format
ISO 21147:2003
>ine-cut to$acco and smoking articles made from it. Survey and analysis of consumer-made
articles
ISO 21227-1:2003
Paints and varnishes. <valuation of defects on coated surfaces using optical imaging. General
guidance
ISO 21533:2003
Dentistry. #eusa$le cartridge syringes intended for intraligamentary in+ections
ISO 21961:2003
Space data and information transfer systems. Data entity dictionary specification language
(D<DS2). 3$stract synta/
ISO 21962:2003
3erospace series. Space data and information transfer systems. Data entity dictionary
specification language (D<DS2). P72 synta/
ISO 22628:2002
#oad vehicles. #ecycla$ility and recovera$ility. &alculation method
ISO 22643:2003
Space data and information transfer systems. Data entity dictionary specification language
(D<DS2). 802D-D Synta/
ISO%IEC 23270:2003
!nformation technology. &P 2anguage Specification
ISO 25539-1:2003
&ardiovascular implants. <ndovascular devices. <ndovascular prostheses
ISO 27001:2005
!nformation Security 0anagement System (!S0S). #ef6 !S" @:AA) "nline. Part of new !S"
@:AAA series.
ISO 81714-1:2001
Design of graphical sym$ols for use in the technical documentation of products. Basic rules
DD ISO%&S 15666:2003
3coustics. 3ssessment of noise annoyance $y means of social and socio-acoustic surveys
Sumber: http://www.standardsglossary.com