Wonderware

ArchestrA System Platform Installation Guide

9/20/11

All rights reserved. No part of this documentation shall be reproduced, stored in a retrieval system, or transmitted by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Invensys Systems, Inc. No copyright or patent liability is assumed with respect to the use of the information contained herein. Although every precaution has been taken in the preparation of this documentation, the publisher and the author assume no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. The information in this documentation is subject to change without notice and does not represent a commitment on the part of Invensys Systems, Inc. The software described in this documentation is furnished under a license or nondisclosure agreement. This software may be used or copied only in accordance with the terms of these agreements.

2011 by Invensys Systems, Inc. All rights reserved.

Invensys Systems, Inc. 26561 Rancho Parkway South Lake Forest, CA 92630 U.S.A. (949) 727-3200 http://www.wonderware.com For comments or suggestions about the product documentation, send an e-mail message to [email protected]. All terms mentioned in this documentation that are known to be trademarks or service marks have been appropriately capitalized. Invensys Systems, Inc. cannot attest to the accuracy of this information. Use of a term in this documentation should not be regarded as affecting the validity of any trademark or service mark. Alarm Logger, ActiveFactory, ArchestrA, Avantis, DBDump, DBLoad, DT Analyst, Factelligence, FactoryFocus, FactoryOffice, FactorySuite, FactorySuite A2, InBatch, InControl, IndustrialRAD, IndustrialSQL Server, InTouch, MaintenanceSuite, MuniSuite, QI Analyst, SCADAlarm, SCADASuite, SuiteLink, SuiteVoyager, WindowMaker, WindowViewer, Wonderware, Wonderware Factelligence, and Wonderware Logger are trademarks of Invensys plc, its subsidiaries and affiliates. All other brands may be trademarks of their respective owners.

Contents

Chapter 1

ArchestrA System Platform Installation ........... 9

Preparing for ArchestrA System Platform Installation ................. 9 ArchestrA System Platform Prerequisites .................................. 9 Selecting a Type of Installation .................................................. 11 About Product-Based Installation .......................................... 11 About Role-Based Installation ................................................ 11 Installing the ArchestrA System Platform ................................... 13 Configuring Products .................................................................. 23 Modifying an ArchestrA User Account ......................................... 24 Modifying an Installation .............................................................. 25 Repairing an Installation .............................................................. 28 Uninstalling an ArchestrA System Platform Component ........... 30 Upgrading an ArchestrA System Platform Component ............... 32

Chapter 2

Application Server Requirements and Prerequisites ............................................ 35

ArchestrA User Account ................................................................ SQL Server Requirements ............................................................. SQL Server Database Requirements ..................................... SQL Server Rights Requirements .......................................... Issues with Legacy Common Components .................................... 35 37 37 37 38

ArchestrA System Platform Installation Guide

Contents

Chapter 3

Configuring and Upgrading Application Server ..................................................... 39

Upgrading a Previous Version of Application Server to Version 3.5 .................................................................................. Basic Upgrade Sequence ............................................................. Upgrading a Galaxy Repository Node ........................................ Upgrading an IDE-only Node ..................................................... Migrating the Galaxy Database ................................................. Upgrading Run-Time Nodes ....................................................... Upgrading Redundant Pairs ....................................................... 39 41 42 43 44 44 45

Chapter 4

InTouch HMI Requirements and Prerequisites ............................................ 47

Wonderware Product Licensing .................................................... 47

Chapter 5

Historian Server Requirements and Recommendations..................................... 51

Server Requirements ..................................................................... High Availability Support ........................................................... Requirements for Historian Management Tools .......................... Remote IDAS Requirements .......................................................... Security Considerations for a Remote IDAS ............................. Disk Sizing and Data Storage ....................................................... General Hardware Recommendations for Storage .................... Planning for Disk Space Requirements ..................................... Disk Requirements for Database Files ...................................... Disk Requirements for Historical Data Files ............................ Analog, Discrete, and Fixed-Length String Storage Requirements ........................................................................ Variable-Length String Storage Requirements ..................... Performance Considerations ......................................................... Server Loading ............................................................................ IDAS Performance ...................................................................... Tiered Historians ........................................................................ Storage Subsystem Performance ................................................ Networking Recommendations ...................................................... Client Access .................................................................................. Client Connections to the Wonderware Historian .................... Client Connection and Workload Limits ................................... Network Protocols for Clients ..................................................... Licensing ......................................................................................... 51 54 54 55 55 56 57 57 58 59 59 60 61 62 63 63 64 64 66 66 67 67 68

ArchestrA System Platform Installation Guide

Contents5

Historian_Tagcount Feature Line .............................................. Historian_ServerOS Feature Line ............................................. Historian_RemoteIDASCount Feature Line ............................. Historian_ModifyHistoryData Feature Line ............................. Historian_HistoryDuration Feature Line .................................. Historian_Processors Feature Line ............................................ Support for Non-English Operating Systems ............................... Integration with Other Wonderware Products ............................. System Sizing Examples ................................................................ Process (Non-Tiered) Historian Sizing Examples ..................... Server 1: 2.4 GHz Single Processor Quad-Core CPU ............ Server 2: Four Dual-Core 2.7 GHz CPUs .............................. Server 3: Four Dual-Core 3.4 GHz CPUs .............................. SCADA (Tiered) Historian Sizing Examples ............................. Topology 1: Centralized Tiered Historian Topology on a Slow/Intermittent Network .......................................... Topology 2: Centralized Tiered Historian Topology for a Single Physical Location .............................................. Topology 3: Simple Tiered Historian Topology for a Modem Configuration ..................................................

69 69 70 71 71 71 72 72 73 73 73 75 77 79 79 82 84

Chapter 6

Historian Server Installation and Configuration ........................................... 87

Microsoft SQL Server Installation ................................................ 88 Wonderware Historian Installation Features .............................. 89 About the Wonderware Historian Installation ............................. 90 Configuring Databases and Data File Locations .......................... 91 Testing the Installation ................................................................. 97 Antivirus Software ......................................................................... 97 Wonderware Historian Menu Shortcuts ....................................... 98 Repairing the Wonderware Historian ........................................... 98 Modifying the Wonderware Historian Installation ...................... 99 Uninstalling the Wonderware Historian ...................................... 99 Upgrading from a Previous Version .............................................. 99 About Upgrading to Wonderware Historian 10.0 SP1 .............. 99 About Database Migration ................................................... 100 Upgrading from Wonderware Historian Version 9.0 .............. 100 Upgrading from Wonderware Historian Version 10.0 ............ 102 Migration of History Data Stored in SQL Server .................... 103

ArchestrA System Platform Installation Guide

Contents

Chapter 7

Wonderware Historian Client Requirements ......................................... 105

Wonderware Historian Client Components ................................ Desktop Applications ................................................................ Microsoft Office Add-Ins ........................................................... ActiveX and .NET Controls ...................................................... Requirements and Recommendations ......................................... Hardware Requirements .......................................................... Operating System Requirements ............................................. Other Software Requirements .................................................. Support for Operating System Language Versions .................... 106 106 106 107 107 107 107 108 108

Chapter 8

Historian Client Installation and Configuration ......................................... 109

About the Wonderware Historian Client Installation ............... Using Wonderware Historian Client Software with Roaming Profiles ....................................................................... Setting Up HTTP Access for Wonderware Historian Client Software ......................................................................... Installing the Microsoft SQLXML Software ............................... Repairing the Wonderware Historian Client Installation ......... Uninstalling Wonderware Historian Client ............................... Upgrading from a Previous Version ............................................ 109 110 111 112 113 113 113

Chapter 9

Information Server Requirements and Recommendations................................... 115

Web Server Requirements and Recommendations .................... Operating System Requirements ............................................. Software Requirements ............................................................ Using a Domain Controller with Wonderware Information Server ............................................................... Using an Existing Domain Controller ................................. Using Wonderware Information Server without a Domain Controller .............................................................. Guidelines for Installing Microsoft Operating Systems ............ Guidelines for Installing Microsoft Windows Server 2003 ........................................................................... Guidelines for Installing Microsoft Windows Server 2008 ........................................................................... Guidelines for Installing Microsoft Windows 7 ....................... Guidelines for Installing Microsoft Windows Server 2008 R2 ...................................................................... 116 117 117 118 119 119 119 119 120 121 121

ArchestrA System Platform Installation Guide

Contents7

Guidelines for Installing Microsoft SQL Server ......................... Guidelines for Installing Microsoft SQL Server 2008 ............. Guidelines for Installing IIS and ASP.NET ............................... Guidelines for Installing IIS and ASP.NET on Windows Server 2003 ........................................................... Guidelines for Installing IIS and ASP.NET on Windows 7 ............................................................................. Guidelines for Installing IIS and ASP.NET on Windows Server 2008 and Windows Server 2008 R2 ......................... Guidelines for Installing Microsoft Reporting Services ............. Guidelines for Configuring SQL Server 2008 Reporting Services ................................................................................. Guidelines for Installing and Uninstalling SharePoint Services ...................................................................................... Configuring Windows SharePoint Services 3.0 ....................... Installing SQLXML for HTTP Access to Wonderware Historian Data .......................................................................... Installing Language Packs for Multilingual Systems ................

122 123 126 126 127 128 130 130 132 132 135 135

Chapter 10

Information Server Installation and Configuration ......................................... 137

Installable Features ..................................................................... Installation Pre-Requisites .......................................................... About the Wonderware Information Server Installation ........... About Wonderware Information Server Configuration ............. Windows Firewall Exceptions .................................................. Using Windows Authentication with Microsoft SQL Server 2008 ........................................................................... Configuring the Wonderware Information Server ..................... Starting the Configurator Utility ............................................. Configuring the Core Wonderware Information Server ......... Configuring ActiveFactory Reporting ...................................... Defining a New Historian Data Source ................................... Configuring ArchestrA Reporting ............................................ Defining a New Alarm Data Source ......................................... Configuring MultiViews ............................................................ Configuring Sample Content .................................................... Installing the ArchestrA Web Exporter ...................................... Installing the Win-XML Exporter ............................................... Modifying Wonderware Information Server ............................... Repairing Wonderware Information Server ............................ Uninstalling Wonderware Information Server .......................... 138 139 140 141 141 142 142 142 144 146 148 149 150 152 153 153 154 154 154 155

ArchestrA System Platform Installation Guide

Contents

Upgrading from a Previous Version ............................................ Upgrading ActiveFactory Components .................................... Upgrading the Server from Wonderware Information Server 3.1, 4.0 or 4.0 with SP1 ............................................. Installing the Product License ....................................................

155 157 157 157

Index..................................................... 159

ArchestrA System Platform Installation Guide

Chapter 1 ArchestrA System Platform Installation

You can use the ArchestrA System Platform installation program to install the entire suite of products or any of the components.

Preparing for ArchestrA System Platform Installation

Before you begin the installation program, you need to prepare your system, and you should plan your installation according to the two installation types available to youproduct-based and role-based.

ArchestrA System Platform Prerequisites

The ArchestrA System Platform installation program analyzes the software installed on your computer and lists any software that is required but not currently installed.
Important: At the start of the installation, the prerequisites are system-specific and not product-specific.

You must have the following software installed and enabled on your computer before you install the ArchestrA System Platform:

Windows Installer 4.5 Microsoft .NET Framework 3.5 Service Pack 1

ArchestrA System Platform Installation Guide

10 Chapter 1 ArchestrA System Platform Installation

Microsoft .NET Framework 3.5 SP1 is required by the software, as well as by the installation framework. The Windows Server 2008 R2 operating system requires this feature to be enabled prior to allowing the install.
To enable the .NET Framework feature in Windows 2008 Operating System 1 2 3 4

In Control Panel, open Administrative Tools. Open Server Manager, and then click Features. Click Add Features to start the wizard. In the features list, select the .NET Framework 3.5.1 Features check box.

Enabling .NET Framework 3.5.1 feature does not actually install .NET Framework 3.5 SP1. The ArchestrA System Platform media will install it if it is not already installed in the computer.

ArchestrA System Platform Installation Guide

Preparing for ArchestrA System Platform Installation11

The ArchestrA System Platform installation installs both system-specific and product-specific prerequisites. You do not have to exit from the ArchestrA System Platform installation procedure to install the prerequisite software.
Important: The exception to the prerequisites installation workflow is the SQL Server requirement for installing the Galaxy Repository (GR). If you select the GR for installation, and if the supported version of SQL Server is not already installed, you must exit the installation program, install the supported SQL Server version, then resume the installation. We recommend that you install the supported SQL Server version before you begin the ArchestrA System Platform installation program.

For information on prerequisites and software requirements for the specific products, see the Readme files of the specific products located in your documentation directory, or see the specific product information chapter in this installation guide.

Selecting a Type of Installation

The ArchestrA System Platform installation program offers you a choice of two types of installation product-based or role-based.

About Product-Based Installation

Product-based installation provides a combination of features not specific to a node. This would be the preferred installation type for a stand-alone product installation. If you are familiar with Wonderware products and their associated components, you can opt for a product-based installation, and then choose the components that you need. For example if you need to install InTouch with the default options, then select a product-based installation.

About Role-Based Installation

Role-based installation provides a combination of features specific to a node. This is preferred in ArchestrA types of installation. If you are uncertain about the specific products or components you need, but you know what role your computer will play, you can opt for a role-based installation. For example, if your computer is a run-time node or a development node, you can select those roles in the role-based installation program. The ArchestrA System Platform installation program will install all components required for the roles that you have selected.

ArchestrA System Platform Installation Guide

12 Chapter 1 ArchestrA System Platform Installation

It is recommended that you define the node you are installing and select the appropriate role before starting the installation program. During the installation, you can click a role to see its description, as described in "Installing the ArchestrA System Platform" on page 13. The following roles are available for selection:

Runtime Client: Install only the necessary components required

to run a visualization client, Historian client, and ArchestrA object server run-time components.

Development Workstation: Install the components required for

an engineering development workstation with only the required components to allow the node to connect to an existing development server. InTouch and ArchestrA System Platform applications can be developed and tested.

System Platform Development Server: Install the components

required to host the development server, and develop and test InTouch and ArchestrA System Platform applications.

Historian Client: Install the components required to connect to

an existing Historian Server and analyze the data.

Historian Server: Install the necessary components to store

historical data in an ArchestrA environment.

Information Portal: Install the necessary components for

aggregating and presenting plant production and performance data on the internet or company intranet with the capability to access live plant process data, integrated data trending and analysis, production and performance reporting, and integration to existing IT infrastructure and web portals.

All in One Node Custom

ArchestrA System Platform Installation Guide

Installing the ArchestrA System Platform13

Installing the ArchestrA System Platform

You can select a product-based or a role-based installation for your computer.
To install the ArchestrA System Platform 1

Insert the DVD into your DVD-ROM drive. Browse the DVD and run setup.exe in the root directory of the DVD.

The installation program detects the initial system requirements. It first checks if the minimum operating system and hardware requirements are met. If the requirements are met, the installation proceeds to verify the general installation prerequisites. For more information on specific system requirements, see the ArchestrA System Platform 2012 Readme.

ArchestrA System Platform Installation Guide

14 Chapter 1 ArchestrA System Platform Installation

If your computer does not meet the initial system prerequisites, the Prerequisites dialog box appears.

You can select the Show All check box to view all prerequisites.
3

Click the prerequisite whose status is Not Met, and then click Install Prerequisites. The general system prerequisites are installed. Click Next. The select installation type dialog box appears.

ArchestrA System Platform Installation Guide

Installing the ArchestrA System Platform15

Select whether you want a product-based or a computer role-based installation, and then click Next. The select components dialog box appears.

Note: The select components dialog box varies depending on whether you have selected a product-based or a role-based installation.

If you select the Product Based Selection option, then the product based installation dialog box appears.

ArchestrA System Platform Installation Guide

16 Chapter 1 ArchestrA System Platform Installation

If you select the ArchestrA System Platform Computer Roles option, the role based installation dialog box appears.

Note: You can select multiple products or roles. All the selected components will be installed together. 6

Select the check boxes to indicate which products or roles you want to install, and then click Next. The verify selection dialog box appears.

ArchestrA System Platform Installation Guide

Installing the ArchestrA System Platform17

7 8

On the verify selection dialog box, view your selection. Select the Customize Installation check box to change your configuration, if required, and then click Next. The customize installation dialog box appears.

Note: You can click Browse on the customize installation dialog box to change the program installation destination folder.

ArchestrA System Platform Installation Guide

18 Chapter 1 ArchestrA System Platform Installation

Change your selection, and then click Next. If you have selected an InTouch HMI installation, the language selection dialog box appears. Click the language for your InTouch HMI installation.

If you select InTouch features, you need to select a language for the InTouch installation. The localized InTouch versions are supported only in the paired operating system. For example, the German version of the InTouch HMI is only supported on the German operating system.

ArchestrA System Platform Installation Guide

Installing the ArchestrA System Platform19

10 Click Next. The End User License Agreement dialog box appears.

11 Click the I Accept the License Agreement option, and then click
Next. The ArchestrA User Account dialog box appears.

ArchestrA System Platform Installation Guide

20 Chapter 1 ArchestrA System Platform Installation

12 Specify an ArchestrA user account. You can create a new

ArchestrA user account if no other ArchestrA-enabled software is installed on the computer, or specify an existing user account. If you create a new account, do the following:
a b

Type your user name and password. Click the Create Local Account check box if not already selected. By default, this is selected and the Domain/Local Machine box displays your computer name. Specify a different domain/local machine name if necessary. If you clear the check box, the Domain/Local Machine box displays the default domain name. You can then modify it.

If you select an existing user account, it should meet the following requirements:

User account with a permanent password that does not

expire.

User account in which the password cannot be changed. User account that is a member of the local Administrators
group.
a b

Type the user name and password for the existing account. Clear the Create Local Account check box.

The ArchestrA user account is a user name and password combination that enables inter-node communication between all computers in an ArchestrA environment. You must specify the same user account on every node when you install the ArchestrA System Platform components for the first time on computers that communicate with each other. Wherever an ArchestrA user account is required, the ArchestrA System Platform 2012 Installation dialog box appears and you need to provide a valid user name and password.
WARNING! The ArchestrA user account is a Windows operating system account located on the local computer or on a domain. Do not delete this account with operating system account management tools. If you do, ArchestrA-enabled software may stop functioning properly.

ArchestrA System Platform Installation Guide

Installing the ArchestrA System Platform21

13 Click Next. The list of prerequisites for the selected components

appears. The prerequisites listed vary depending on the products or product combinations selected.

14 Click any prerequisite with status of Not Met, and click Install
Prerequisites. When all prerequisites are installed, click Next.

The final installation confirmation dialog box appears.

ArchestrA System Platform Installation Guide

22 Chapter 1 ArchestrA System Platform Installation

15 Click Install. The progress bar appears.

16 After the installation is over, the complete installation dialog box

appears. If the installed products do not need configuration, click Finish, else click Configure. For more information on configuring products, see "Configuring Products" on page 23.
Note: You must restart the system to complete the installation.

ArchestrA System Platform Installation Guide

Installing the ArchestrA System Platform23

Configuring Products
Some products require post-installation configuration for initial setup. You need to configure your products using the Configurator dialog box after you have installed them. The Configurator dialog box lists all product components that you have installed. You can configure the locations for the product database and the data files.
Note: You need to configure the products only if you have installed Wonderware Historian Server or Wonderware Information Server.

For more information on the products, see the following chapters in this guide:

Modifying an Installation Repairing an Installation Uninstalling an ArchestrA System Platform Component Upgrading an ArchestrA System Platform Component
To configure products 1

In the complete installation dialog box, click Configure. The Configurator dialog box appears.The following example shows configuration for the Historian Server

ArchestrA System Platform Installation Guide

24 Chapter 1 ArchestrA System Platform Installation

2 3

On the left pane, select the component and configure the details on the right pane. Click Configure. After the installation is complete, the system may prompt you to restart. You can restart now or later.

Note: The installed programs may not function properly until you restart the system.

Modifying an ArchestrA User Account

After you install the ArchestrA System Platform, you can use the ArchestrA Change Network Account utility to change or recreate the ArchestrA user account. This utility is located in the Common folder after you install the ArchestrA System Platform products. You must have Administrator privileges on the computer to make changes with the Change Network Account utility. For more information, see the Change Network Account utility on-line help.
Note: If you recreate the user account using the Change Network Account utility, the Microsoft Windows security component on the computer can take several minutes to update this information on the ArchestrA Galaxy node. Until that occurs, the ArchestrA component may not function properly. Restarting the Galaxy node updates this information immediately.

ArchestrA System Platform Installation Guide

Modifying an Installation25

Modifying an Installation
You can change the ArchestrA System Platform components installed on your computer. You can add new components or remove the existing ones. You can modify any component of ArchestrA System Platform.
Note: You must have the installation DVD inserted in the DVD-ROM drive before you can modify a program. To modify an installation 1

Click the Add or Remove Programs option in Windows Control Panel. (In Windows Server 2008 R2, this is called Uninstall or Change a Program.) The list of software installed on your computer appears. Select any ArchestrA System Platform component, and then click the Uninstall/Change button. The Modify, Repair or Remove Installation dialog box appears.

Note: The name of the Uninstall/Change button varies depending on the Windows operating system installed on your computer.

ArchestrA System Platform Installation Guide

26 Chapter 1 ArchestrA System Platform Installation

Click the Modify option, and then click Next. The list of ArchestrA System Platform components appears.

Select or clear the components that you want to add or remove, and then click Next. The verify change dialog box appears.

ArchestrA System Platform Installation Guide

Modifying an Installation27

Click Modify. The selected components are added or removed and the complete modification dialog box appears.

Click Finish. The modification is complete.

ArchestrA System Platform Installation Guide

28 Chapter 1 ArchestrA System Platform Installation

Repairing an Installation
You can repair the installation of any component of the ArchestrA System Platform. You can repair missing or corrupt files, registry keys or shortcuts. You can also reset the registry key to the default value.
Note: You must insert the installer DVD in the DVD-ROM drive before you can repair a program. To repair an installation 1

Click the Add or Remove Programs option in Windows Control Panel. (In Windows Server 2008 R2, this is called Uninstall or Change a Program.) The list of software installed on your computer appears. Select the ArchestrA System Platform component that you want to repair, and then click the Uninstall/Change button. The Modify Repair or Remove Installation dialog box appears.

Note: The name of the Uninstall/Change button varies depending on the Windows operating system installed on your computer.

ArchestrA System Platform Installation Guide

Repairing an Installation29

Click the Repair option, and then click Next. The Confirm Repair dialog box appears.

Click Repair. The complete repair dialog box appears.

Click Finish. The installed software is repaired.

ArchestrA System Platform Installation Guide

30 Chapter 1 ArchestrA System Platform Installation

Uninstalling an ArchestrA System Platform Component

You can uninstall any component of the ArchestrA System Platform that is installed on your computer.
To uninstall the ArchestrA System Platform component 1

Click the Add or Remove Programs option in Windows Control Panel. (In Windows Server 2008 R2, this is called Uninstall or Change a Program.) The list of software installed on your computer appears. Select the ArchestrA System Platform component that you want to uninstall, and then click the Uninstall/Change button. The Modify Repair or Remove Installation dialog box appears.

Note: The name of the Uninstall/Change button varies depending on the Windows operating system installed on your computer.

ArchestrA System Platform Installation Guide

Uninstalling an ArchestrA System Platform Component31

Click the Remove option, and then click Next. The confirmation dialog box appears.

Click Uninstall. The component is uninstalled and the complete uninstallation dialog box appears.

Click Finish. The uninstallation process is complete.

ArchestrA System Platform Installation Guide

32 Chapter 1 ArchestrA System Platform Installation

Upgrading an ArchestrA System Platform Component

You can upgrade any component of the ArchestrA System Platform if you have an older version of the software installed in your system.
To upgrade an ArchestrA System Platform Program Component 1

Insert the DVD into your DVD-ROM drive. Run setup.exe to start the set-up program. The upgrade feature dialog box appears.

Note: You can only upgrade the products that are already installed and you will not be able to install new products that have an upgrade process. The installed components that need to be upgraded are selected and disabled. You can neither clear these check boxes nor select more components during the upgrade.

ArchestrA System Platform Installation Guide

Upgrading an ArchestrA System Platform Component33

Click Next. The confirm upgrade dialog box appears.

Click Upgrade. The complete upgrade dialog box appears.

Click Finish. The upgrade process is complete.

ArchestrA System Platform Installation Guide

34 Chapter 1 ArchestrA System Platform Installation

ArchestrA System Platform Installation Guide

35

Chapter 2 Application Server Requirements and Prerequisites

ArchestrA User Account

The ArchestrA user account is a user name and password combination that enables inter-node communication between all computers in an ArchestrA environment. You must specify the same user account each time you install Application Server components on computers that communicate with each other.
WARNING! The ArchestrA user account is a Windows operating system account located on the local computer or on a domain. Do not delete this account with operating system account management tools. If you do, ArchestrA-enabled software may stop functioning properly.

ArchestrA System Platform Installation Guide

36 Chapter 2 Application Server Requirements and Prerequisites

If no other ArchestrA-enabled software is installed on the computer, you are prompted to create a new ArchestrA user account or specify an existing user account during the Application Server installation. If you select an existing user account, it should meet the following requirements:

User account with a permanent password that does not expire. User account in which the password cannot be changed. User account that is a member of the local Administrators group.
Note: The Application Server installation will add the necessary SQL Server privileges for SQL Server 2008. For more information, see "SQL Server Rights Requirements" on page 37.

After you install the Application Server, you can use the ArchestrA Change Network Account utility to change or recreate the ArchestrA user account. This utility is located in the Common folder after you install Application Server. You must have Administrator privileges on the computer to make changes with the Change Network Account utility. For more information, see the Change Network Account utility documentation.
Note: If you recreate the user account using the Change Network Account utility, the Microsoft Windows security component on the computer can take several minutes to update this information on the ArchestrA Galaxy node. Until that occurs, the ArchestrA component may not function properly. Restarting the Galaxy node updates this information immediately.

ArchestrA System Platform Installation Guide

SQL Server Requirements37

SQL Server Requirements

In a typical configuration, Microsoft SQL Server will be installed before you install Application Server. It is important to take into consideration the requirements of the different versions of SQL Server. For more information about the Microsoft SQL Server versions supported by Application Server, see the current Application Server Readme available on the ArchestrA System Platform DVD.
Note: Application Server supports only the 32-bit version of SQL Server. The SQL Server installation media allows the selection of 32-bit (x86) or 64-bit (x64) in the Options tab of the installation program. If you have already installed the 64-bit version, you must exit the Application Server installation, uninstall SQL Server 2008 64-bit and replace it with a 32-bit version.

SQL Server Database Requirements

See the Application Server Readme for information about the versions SQL Server supported by Application Server. For more information about specific requirements for SQL Server configuration, see "SQL Server Rights Requirements" on page 37.

A supported version of SQL Server must be installed on the

computer designated as the ArchestrA Galaxy Repository (GR) node before you install Application Server.

You cannot install and use Application Server on a computer that

has both Microsoft SQL Server 2000 and Microsoft SQL Server 2008 installed.

The GR locks the SQL Server maximum memory usage to 65% of

the computer's physical memory.

TCP/IP must be enabled on the computer hosting a SQL Server

database. The TCP/IP protocol setting can be verified from the SQL Server Network Configuration under SQL Server Configuration Manager.

SQL Server Rights Requirements

SQL Server 2008 and later versions do not automatically create the BUILTIN\Administrators role that was delivered in SQL Server 2005. Because of this change to SQL Server, the Application Server installation process creates the necessary operating system user group (aaAdministrators), as well as the necessary SQL Server logon. This automated process provides the rights required to allow operations within the GR without the need for blanket BUILTIN\Administrator rights. The aaAdministrators group must be present and enabled.

ArchestrA System Platform Installation Guide

38 Chapter 2 Application Server Requirements and Prerequisites

If you accidentally delete the aaAdministrators group from the Windows operating system, you can run either of the two following options to restore it:

Click Start, point to All Programs, point to Wonderware, and then

click the Change Network Utility.

Click Start, point to All Programs, point to Wonderware, and then

click the aaConfig SQL Utility. If you accidentally delete the aaAdministrators group from the SQL Server security logons, you must run the aaConfig SQL Utility to restore it.

Issues with Legacy Common Components

Wonderware Application Server uses the latest version of the ArchestrA common components, which are installed to the following folder: C:\Program Files\Common Files\ArchestrA On a 64-bit operating system, the common components are installed to the following folder: C:\Program Files (x86)\Common Files\ArchestrA Legacy ArchestrA common components are installed to the following folder: C:\Program Files\FactorySuite\Common On a 64-bit operating system, legacy common components are installed to the following folder: C:\Program Files (x86)\FactorySuite\Common It is possible to install duplicate common components on a computer if you install an ArchestrA product that still uses the legacy common components after you install Application Server. Unexpected behavior can occur if duplicate common components are installed. The system components may not run properly, or may not run at all. Contact technical support for further assistance. You can also reference Tech Note 454, Manual Uninstall of Wonderware Products.

ArchestrA System Platform Installation Guide

39

Chapter 3 Configuring and Upgrading Application Server

You can upgrade previous versions of the Application Server to version 3.5.

Upgrading a Previous Version of Application Server to Version 3.5

The following earlier versions of Application Server can be upgraded to version 3.5:

Version 3.0 SP2 Version 3.1 Version 3.1 SP1 Version 3.1 SP2 Patch 01 Version 3.1 SP3 Patch 01
Important: Ensure that you have installed the latest patch for your existing version, wherever possible, before upgrading to version 3.5. Also, only systems that meet the minimum system requirements, including operating system and SQL Server version, can be upgraded.

ArchestrA System Platform Installation Guide

40 Chapter 3 Configuring and Upgrading Application Server

You can upgrade the following components of Application Server to version 3.5:

Bootstrap
You will see a warning message if you attempt to upgrade a computer with a deployed WinPlatform. You have the choice to continue with the upgrade or to cancel. If you continue with the Bootstrap upgrade, the WinPlatform object is removed and upgraded to version 3.5. If an InTouchViewApp instance is deployed for a managed InTouch application, the folder is undeployed and deleted. You are prompted to stop InTouch WindowViewer from running the managed application.

IDE and Bootstrap

You will see a warning message if you attempt to upgrade a computer with a deployed WinPlatform. You have the choice to continue with the upgrade or to cancel. If you continue with the upgrade, the current IDE and Bootstrap are removed and the new versions are installed. If an installed InTouchViewApp instance is deployed for a managed InTouch application, the folder is undeployed and deleted. You are prompted to stop InTouch WindowViewer from running the managed application.

Galaxy Repository (GR) and Bootstrap

You will see a warning message if you attempt to upgrade a computer with a deployed WinPlatform or a client application is connected to the GR node. You have the choice to continue with the upgrade or to cancel. If you continue with the Bootstrap upgrade, the components are removed and upgraded to version 3.5. Upgraded IDE/Client nodes cannot connect to a non-upgraded GR node. The GR node is undeployed before it is upgraded to Application Server 3.5.

ArchestrA System Platform Installation Guide

Upgrading a Previous Version of Application Server to Version 3.541

IDE, GR, and Bootstrap

You see a warning message if you attempt to upgrade a computer with a deployed WinPlatform or if a client application is connected to the GR node. You have the choice to continue with the upgrade or to cancel. If you continue with the Bootstrap upgrade, all components are removed and upgraded to version 3.5.

Run-time node
Upgrading the Bootstrap on any computer removes the running WinPlatform and AppEngine. Both of these system objects are marked as undeployed if they are running on any Galaxy node.
Note: No system objects are removed on non-GR nodes when migrating from earlier versions of Application Server.

If a remote node is disconnected from the GR node, or if you upgrade the remote node before you upgrade the GR node, the remote Platform is not marked as undeployed. You must undeploy and redeploy the Platform. The run-time functionality of Application Server continues throughout the upgrade process, except during a run-time node upgrade. Configuration, however, must be done using components that are at the same version level. For example, you cannot use the Galaxy Browser in the InTouch HMI on a non-upgraded node to view or select attributes from an upgraded Galaxy. You can, though, view or modify run-time data using an InTouch window or the Object Viewer.

Basic Upgrade Sequence

Important: Back up the Galaxy before starting an upgrade. Also, upload any run-time changes for critical objects. You cannot upload any run-time change from non-upgraded nodes after you upgrade the system.

The basic upgrade steps are:

1

Upgrade your hardware and prerequisite software such as the operating system or Microsoft SQL Server to the required versions. For information on hardware and software requirements, see the Readme file. If you are upgrading the SQL Server 2008 database on the GR node, you must undeploy the GR node before starting the SQL Server 2008 upgrade.

Upgrade the GR node. For more information, see "Upgrading a Galaxy Repository Node" on page 42.

ArchestrA System Platform Installation Guide

42 Chapter 3 Configuring and Upgrading Application Server

Upgrade at least one IDE installation. If you upgrade the GR node, that IDE installation is upgraded. However, if you have any IDE-only nodes, you will have to upgrade them separately. For more information, see "Upgrading an IDE-only Node" on page 43. Use the upgraded IDE to connect to the upgraded GR node and migrate the Galaxy database. For more information, see "Migrating the Galaxy Database" on page 44. Deploy the GR Platform. Upgrade run-time nodes.

5 6

Upgrade non-redundant run-time nodes one at a time and

redeploy them. For more information, see "Upgrading Run-Time Nodes" on page 44.

Upgrade redundant pairs as a set. For more information, see

"Upgrading Redundant Pairs" on page 45. If you upgrade a remote Platform node before you migrate the Galaxy database, the remote Platform and hosted objects show the software upgrade pending icon after you migrate and deploy the Galaxy. To resolve this, undeploy and redeploy the remote Platform. The preferred sequence of upgrade is:
1 2 3 4

Upgrade the GR node. Upgrade the IDE node. Migrate the Galaxy database. Upgrade the remote Platforms.

Important: After you have upgraded the GR node to Application Server version 3.5, you will not be able to deploy or undeploy from the GR node to non-upgraded remote nodes. Also, the upgraded GR node will not be able to connect to an IDE node that has not been upgraded to version 3.5. Note: As long as the operating system and SQL requirements are met, upgrade is supported. During software installation, operating system upgrade is not supported.

Upgrading a Galaxy Repository Node

When you upgrade a GR node, the database schema is migrated from the existing schema to the new version 3.5 schema. Existing data from the GR is also migrated to the new schema. You must upgrade all Application Server components (IDE, Bootstrap, and GR) to the same version that are installed on the GR node. When you upgrade the GR node, the local Platform and all hosted objects are undeployed.

ArchestrA System Platform Installation Guide

Upgrading a Previous Version of Application Server to Version 3.543

To upgrade the GR node 1 2 3 4 5 6

Run Setup.exe from the DVD. The Welcome dialog box appears. Click Next. Review the recommended steps before you upgrade and take appropriate action, if needed. Click Next. Review the status of objects deployed in the system and take appropriate action, if needed. Click Next. The Select Features dialog box appears. Any previously-installed features appear dimmed. Click Next. The Prerequisites dialog box appears. You can select the Show All check box to view all prerequisites. Click the prerequisite whose status is "Not Met", and then click Install Prerequisites. The general system prerequisites are installed. Click Next. Follow the prompts to complete the upgrade.

Upgrading an IDE-only Node

If you have IDE-only installations on nodes other than the GR node, you need to upgrade them separately.
Important: A GR node that has been upgraded to Application Server version 3.5 cannot connect to an IDE node that has not also been upgraded. Conversely, an IDE node that has been upgraded cannot connect to a GR node that has not been upgraded. To upgrade an IDE-only node 1 2 3 4

On the IDE node, run Setup.exe from the DVD. The Welcome dialog box appears. Click Next. The Select Features dialog box appears. Any previously-installed features appear dimmed. Click Next. The Prerequisites dialog box appears. You can select the Show All check box to view all prerequisites. Click the prerequisite whose status is Not Met, and then click Install Prerequisites. The general system prerequisites are installed. Click Next. Follow the prompts to complete the upgrade.

ArchestrA System Platform Installation Guide

44 Chapter 3 Configuring and Upgrading Application Server

Migrating the Galaxy Database

To migrate the database:

The IDE you use to migrate the database must be the current
version.

The GR node must already be upgraded to the current version.

Make sure that all connections to the Galaxy database are closed before migrating the database. After you migrate the Galaxy, deployed objects on a non-upgraded node are marked with pending software upgrade status.
To migrate the Galaxy database 1 2 3

Start the IDE. Connect to the Galaxy database to migrate. You are prompted to migrate it. Follow the prompts to complete the migration.

Upgrading Run-Time Nodes

After you upgrade the GR and IDE, all run-time nodes continue to run. This allows you to upgrade the run-time nodes individually when it is convenient.
Important: After you have upgraded the GR node to Application Server version 3.5, you will not be able to deploy or undeploy from the GR node to remote nodes. Also, the upgraded GR node will not be able to connect to an IDE node that has not been upgraded to version 3.5.

Upgrading to Application Server 3.5 on a run-time node will remove any deployed Platforms on that node. After you upgrade and then deploy a run-time node, it continues to function with other run-time nodes as long as the other nodes are the current version or from the previous version. The run-time node does not function while you are upgrading it. You cannot roll back the upgrade. After you upgrade the run-time node and all hosted objects, you need to redeploy the WinPlatform to the node. The GR node migration fails if the GR node is used as a run-time node for another GR.
To upgrade a run-time node 1 2

Run Setup.exe from the DVD. The Welcome dialog box appears. Click Next. Accept the license agreement.

ArchestrA System Platform Installation Guide

Upgrading a Previous Version of Application Server to Version 3.545

3 4 5 6

Click Next. Review the status of objects deployed in the system and take appropriate action, if needed. Click Next. The Select Features dialog box appears. Any previously-installed features appear dimmed. Click Next. Follow the prompts to complete the upgrade. Deploy the platform and all hosted objects to the run-time node.

Upgrading Redundant Pairs

You must upgrade a redundant pair as a set. The primary and backup engines must be treated as a single node. During the upgrade, the primary and backup engines are not available for fail-over.
To upgrade a redundant pair 1

Using the System Management Console (SMC), set all engines on the redundant pair platforms to off-scan.

Note: Alarms do not update in alarm clients while the engines are set to off-scan. 2

On the primary node, do the following:

a b c d e

Run Setup.exe from the DVD. The Welcome dialog box appears. Click Next. Accept the license agreement. Click Next. Review the status of objects deployed in the system and take appropriate action, if needed. Click Next. The Select Features dialog box appears. Click Next. Follow the prompts to complete the upgrade.

3 4 5

Repeat step 2 for the backup node. Deploy the primary platform. Deploy the backup platform.

ArchestrA System Platform Installation Guide

46 Chapter 3 Configuring and Upgrading Application Server

ArchestrA System Platform Installation Guide

47

Chapter 4 InTouch HMI Requirements and Prerequisites

You need to meet the requirements and prerequisites for Wonderware products.

Wonderware Product Licensing

NOTICE: LIMITATIONS TO THE WONDERWARE LICENSING FOR INTOUCH 10.5 AND APPLICATION SERVER 3.5. PROPER USE OF LICENSED PRODUCTS MUST BE STRICTLY FOLLOWED TO ENSURE A FULLY FUNCTIONING PRODUCTION SYSTEM. READ THIS ENTIRE NOTICE.

If you are licensed for a ArchestrA System Platform or the Wonderware Application Server, you can use all the functionality in these products up to the limits in your license files. If you are licensed for only InTouch 10.5 development and run time, you are licensed to use:

All InTouch product software capabilities InTouch tags up to the licensed limit ArchestrA graphics ArchestrA IDE
Important: You are not licensed to use or deploy in production any Object templates in the IDE other than InTouchViewApp Object.

ArchestrA System Platform Installation Guide

48 Chapter 4 InTouch HMI Requirements and Prerequisites

However, you can use the additional functionality in the Wonderware Application Server in a Demo mode as you learn about its capabilities and consider the advantages of upgrading to full Wonderware System Platform license. Wonderware provides you with most or all of the product software in a demonstration, or Demo, mode. Demo mode lets you learn about and experience the full breadth of the Wonderware product line, technology, and capabilities without requiring a legal license file to run the software.
How to obtain licensing information:

You can browse licensing information for any computer that appears in the ArchestrA License Manager browser.

You can navigate to the ArchestrA License Manager from Start, All Programs, Wonderware. You can start the ArchestrA License Manager from any Wonderware product by clicking Help, About, then click View License.

ArchestrA System Platform Installation Guide

Wonderware Product Licensing49

You can use the License Information utility to see whether the current local or remote I/O counts exceed the maximum specified by your Wonderware license.

In addition, carefully read the License Certificate documentation, which describes the licensed products you received. The License Certificate is included with your Licensing CD.
Important: Attempting to deploy unlicensed functionality to a production environment is illegal and results in problems when upgrading to a future version. Deploying unlicensed functionality is not supported by Wonderware.

For further explanation of licensing compliance, see Appendix B of the InTouch Data Management Guide installed with the software. Or, contact your local Wonderware Distributor or Wonderware Technical Support.

ArchestrA System Platform Installation Guide

50 Chapter 4 InTouch HMI Requirements and Prerequisites

ArchestrA System Platform Installation Guide

51

Chapter 5 Historian Server Requirements and Recommendations

For your Wonderware Historian to achieve maximum performance, make sure your hardware and software meets the following requirements. Because the Wonderware Historian is a high-performance relational database, it is also important to size your system to handle the level of data that you expect to store. The Wonderware Historian is tightly integrated with Microsoft products, and a working knowledge of both Microsoft SQL Server and Microsoft Windows operating systems is required. For more information on Microsoft SQL Server or Windows operating systems, see your Microsoft documentation.

Server Requirements
The minimum hardware and software requirements for the Wonderware Historian are based on the tag count and the anticipated data throughput rate. These requirements are divided into four levels, which are outlined in this section.

ArchestrA System Platform Installation Guide

52 Chapter 5 Historian Server Requirements and Recommendations

The recommended memory configuration for SQL Server 2005 (32-bit) and SQL Server 2008 (32-bit) is to clamp their memory consumption to 50 percent of the amount of physical memory installed on the server or 512 MB, whichever is larger. For SQL Server 2008 R2 Standard and Enterprise editions (32-bit), the recommended physical memory configuration is 1 GB. The recommended Windows virtual memory setting is twice the amount of physical RAM installed on the server. (See the Microsoft Web site, www.microsoft.com, for updated installation requirements for SQL Server versions.) For tag counts less than 30,000, the data throughput rate is assumed to be equal to the tag count. For tag counts greater than or equal to 30,000, the data throughput rate is assumed to be 30,000 values per second. This is the guaranteed throughput that the system can handle, but throughput rates substantially higher, are possible depending on the hardware configuration. You can install the Wonderware Historian on operating systems that have the User Account Control (UAC) turned on. If you are running the Wonderware Historian on a virtual server, the historian must have an adequate CPU, adequate network memory, and disk I/O resources at all times. Overloading the virtual server leads to unpredictable behavior.
Note: If the Wonderware Historian is running on the Windows Server 2003 or later operating system, DDE is not supported.
Operating Systems

The following are the supported operating systems:

Windows Server 2003 Enterprise R1/R2 SP2 Windows Server 2003 Standard Edition R1/R2 SP2 Windows XP Professional SP3 Windows Server 2008 Standard (32 or 64-bit) Windows Server 2008 Enterprise Edition SP2 (32 or 64-bit) Windows Server 2008 R2 Standard Windows Vista Business SP2 (32 or 64-bit) Windows Vista Enterprise SP2 (32 or 64-bit) Windows Vista Ultimate Edition SP2 (32 or 64-bit) Windows 7 Professional Edition (32 or 64-bit) Any of the above running under VMWare ESX, Server version 4.0 Stratus with Windows Server 2008 SP2

ArchestrA System Platform Installation Guide

Server Requirements53

Microsoft SQL Server

The following are the supported SQL Server versions (32-bit versions only):

Microsoft SQL Server 2008 SP1 Enterprise Edition Microsoft SQL Server 2008 SP1 Standard Edition Microsoft SQL Server 2005 SP3 Standard Edition Microsoft SQL Server 2005 SP3 Enterprise Edition
Disk Space

300 MB of free disk space to install the Wonderware Historian Appropriate space for history block storage. For more information,
see "Disk Sizing and Data Storage" on page 56.
Level 1 Server - Hardware

A Level 1 server can handle a load of about 5,000 tags. For example, 2,600 analogs, 2,200 discretes, 300 strings, and 20 non-I/O Server (manual) tags. The requirements are:

Processor: Minimum: P4 3.2 GHz CPU Recommended: dual-core CPU RAM: Minimum: 1 GB (Windows Server 2003 and Windows XP) Minimum: 2 GB (Windows Server 2008 and Windows Vista) Recommended: 4 GB 100 Mbps network interface card (NIC)
Level 2 Server - Hardware

A Level 2 server can handle a load of about 63,000 tags. For example, 40,000 analogs, 20,000 discretes, 300 strings, and 5,000 non-I/O Server (manual) tags. The requirements are:

Processor: Minimum: P4 3.0 GHz dual CPU Recommended: quad-core CPU RAM: Minimum: 4 GB Recommended: 6 GB 1 Gbps network interface card (NIC)

ArchestrA System Platform Installation Guide

54 Chapter 5 Historian Server Requirements and Recommendations

Level 3 Server - Hardware

A Level 3 server can handle a load of 130,000 tags. For example, 70,000 analogs, 50,000 discretes, 6,000 strings, and 20 non-I/O Server (manual) tags. The requirements are:

Processor: Minimum: P4 2.7 GHz Xeon quad CPU Recommended: dual processor, quad-core CPUs RAM: Minimum: 6 GB Recommended: 10 GB 1 Gbps network interface card
A performance report for different historian systems is provided in "System Sizing Examples" on page 73.

High Availability Support

The Wonderware Historian provides built-in support for Stratus ft3500 fault-tolerant servers.

Requirements for Historian Management Tools

The management tools include the Wonderware Historian System Management Console and the Wonderware Historian Database Export/Import Utility. If you are installing the tools on a remote computer, the following requirements apply:

Any of the following operating systems: Windows Server 2003 Enterprise R1/R2 SP2 Windows Server 2003 Standard Edition R1/R2 SP2 Windows XP Professional SP3 Windows Server 2008 Standard SP2 (32 or 64-bit) Windows Server 2008 Enterprise Edition SP2 (32 or 64-bit) Windows Server 2008 R2 Standard Windows Vista Business SP2 (32 or 64-bit) Windows Vista Enterprise SP2 (32 or 64-bit) Windows Vista Ultimate Edition SP2 (32 or 64-bit) Windows 7 Professional (32 or 64-bit) Any of the above running under VMWare ESX Stratus with Windows Server 2008 SP2
ArchestrA System Platform Installation Guide

Remote IDAS Requirements55

Microsoft Management Console 2.0 MDAC 2.7 Internet Explorer 6.0 or later 20 MB of free disk space
Note: The InTouch History Importer is installed as part of the server installation.

Remote IDAS Requirements

A remote IDAS runs on all supported operating systems: domain member, standalone workstation, or server. To determine the CPU and memory needed for a remote IDAS, use the same guidelines of the Wonderware Historian computer. For more information, see "Server Requirements" on page 51. The IDAS computer does not necessarily have to be as powerful as the server computer, because it will not be performing all of the same functions (for example, processing SQL Server transactions), but it should be powerful enough to handle the tag load that you expect. The amount of free disk space required depends on whether or not you will have store-and-forward enabled for the IDAS. If store-and-forward is enabled, you need to make sure that the disk space on the remote IDAS computer is sufficient to store cached data if the network connection to the historian fails. Estimate the disk space requirements for a remote IDAS as that of the historian. For more information, see "Disk Requirements for Historical Data Files" on page 59. A remote IDAS configured for store-and-forward has more stringent requirements on memory to ensure that the IDAS local storage engine has sufficient resources to run properly. In general, estimate memory requirements for a remote IDAS configured for store-and-forward the same as you would for a historian having the corresponding tag count.

Security Considerations for a Remote IDAS

If you set up a remote IDAS, you need to configure security settings that allow access permissions between the remote IDAS and the Wonderware Historian. For example, the historian needs to access the remote computer to start and stop the IDAS. Also, the remote IDAS needs to access the historian computer to send data. These are administrative tasks, which require administrative permissions.

ArchestrA System Platform Installation Guide

56 Chapter 5 Historian Server Requirements and Recommendations

When you install the historian, you must specify an administrative user account under which all of the historian services run. Make sure that this same user account is added to the Administrators security group on the remote IDAS computer. The existence of the same administrative user account on both the computers, allows the historian to access the remote IDAS, and vice versa.
Note: A remote IDAS only requires the same administrative account to exist on the local computer and the historian. It is not required for you to log on to the remote IDAS computer using the administrator account.

If you change the Windows login using the System Management Console, after installing the historian, make sure that the user account change is reflected on the remote IDAS computer. If you are running the historian in a domain environment (recommended), you can create the administrative user account on the domain controller and add the account to the Administrators group on the historian computer and the remote IDAS computer. Do not create a local user on any computer with the same name and/or password as the administrative user account. If you are running a remote IDAS in a workgroup environment, there is no centralized management and authentication of user accounts (no domain controller). Create the same administrative user account on each individual computer running a historian component. For example, if you have a computer running the historian and plan to install remote IDASs on two other computers, create the user account (that is, matching user names and passwords) on all three computers. For information on workgroups, domains, creating user accounts, and adding accounts to the Administrators security group, see your Microsoft operating system documentation.

Disk Sizing and Data Storage

A number of storage-related questions must be answered when setting up the Wonderware Historian. They include:

How important is the data? Is it acceptable that four weeks of data

is stored online and is then over-written?

How important is the configuration and event data? This type of

information is stored in the Microsoft SQL Server database.

How often is data in the Microsoft SQL Server database changing? Is anyone in the organization going to require operating data that
is older than a month? Older than a year?

How much is the SQL Server component of the historian expected

to be used (for example, for the event system)?

ArchestrA System Platform Installation Guide

Disk Sizing and Data Storage57

How long can the system be off-line in the event of a component

failure?

What happens if the system stops storing data? What happens if stored data is lost as a result of a hard drive
failure?

Can the server equipment be taken off-line to perform repairs?

Ask yourself questions like these to help you determine disk space requirements and how you should plan to protect your data. A performance report for different historian systems is provided in "System Sizing Examples" on page 73.

General Hardware Recommendations for Storage

The following are the general recommendations for the hardware used for storage:

SCSI drives configured using hardware RAID is optimum. The

disk space required is a function of data rate and the desired history duration.

NTFS is the only officially supported file system for a production

environment. Although the historian can run using the FAT file system, data corruption can occur if the system crashes while files are still open.

Enable file compression for the historical data storage locations:

Circular, Buffer, and Permanent. File compression on these directories is automatically set during the installation process. However, if you re-assign the storage locations (for example, for the alternate location), you must set the compression manually.
Note: File compression is only available for the NTFS file system.

Planning for Disk Space Requirements

There are a number of factors to consider when estimating the amount of disk space required to run the Wonderware Historian:

Disk space required to install the required software components

and files needed to run the historian.

Disk space required to store the historian database files. Disk space required to store the historian data files. If a remote IDAS is used, the disk space required on the local IDAS
computer to store cached data if the network connection to the historian fails.

ArchestrA System Platform Installation Guide

58 Chapter 5 Historian Server Requirements and Recommendations

We recommend that you keep sufficient free disk space (around

20%) so that you can run a disk defragmenting utility without negatively affecting the historian performance. A performance report for different historian systems is provided in "System Sizing Examples" on page 73.

Disk Requirements for Database Files

The Wonderware Historian installation program adds two databases to the Microsoft SQL Server: Runtime and Holding.

The Runtime database stores all historian configuration data and

event data. The information in the Runtime database is stored to disk as a database file named Run100dat.mdf. Its associated log file is Run100log.ldf. The configuration data in the database file remains relatively static and usually never causes the file size to go above 20 MB. However, if you set up events, records of event detections and the results of any data summaries or snapshots increase the size of the Runtime database file because the tables are filling up. Also, entries are created in the log file for event-related transactions. If the database files are set to auto-size, the Runtime database file expands to accommodate event-related data until the hard drive is full.

The Holding database temporarily stores tag definitions being

imported from InTouch HMI software. The information in the Holding database is stored to a database file named Holding100Dat.mdf. Its associated log file is Holding100Log.ldf.
Note: Historical plant data is not stored in the database files. This type of data is stored in special files called history blocks.

The Runtime and Holding databases are set to automatically expand at a 10% rate (the default). You cannot change these defaults during the installation. The databases can be resized later using Microsoft SQL Server utilities. For more information on sizing databases, see your Microsoft SQL Server documentation for guidelines.
Note: If you are upgrading version 9.0 or 10.0 of the Wonderware Historian, the installation program needs space to save a copy of the old Runtime database while it creates the new one. To upgrade, the database space required is twice the size of the old database, plus the database size for the new install.

ArchestrA System Platform Installation Guide

Disk Sizing and Data Storage59

Disk Requirements for Historical Data Files

The Wonderware Historian stores historical plant data to hard disk in special files called history blocks. When you install the historian, you are required to specify a storage location (directory) in which these files will be dynamically created and subsequently filled. You must have at least 200 MB of free disk space for these files to install the historian. After the historian is up and running, when the free space on the drive containing the storage directory drops below a minimum threshold, the oldest data is overwritten. It is very important that you allocate enough disk space to store your plant data for the desired length of time. The amount of data that can be stored to disk before running out of space is dependent upon the number of tag values that are stored and how often they are stored. That is, the more tags you have, the fewer values you can store per tag before you need to archive off the oldest data. Likewise, the higher the specified storage rate per tag, the faster the system runs out of space. NTFS file compression can reduce the actual amount of storage space by factors of 2:1 to 10:1. For the estimates, a conservative "worst case" factor of 2:1 is used.
Important: You must have sufficient disk space in the circular storage area to hold at least two full history blocks, plus the space specified for the minimum threshold for the circular storage area. Use the System Management Console to view or change the minimum threshold value.

A performance report for different historian systems is provided in "System Sizing Examples" on page 73.

Analog, Discrete, and Fixed-Length String Storage Requirements

For analog, discrete, and fixed-length string (128 characters or less) tags, each value that is stored uses Storage Size + 3 bytes of disk space, plus approximately 15% overhead. Use the following formula to estimate the disk usage: Estimated disk usage per day = (1.15*(Storage Size + 3)*number of tags) * (60/storage rate in seconds) * 60 minutes * 24 hours / (NTFS compression ratio) For example, the disk usage per day for 10,000 4-byte analog tags (that is, Storage Size = 4 bytes) that are stored at ten-second intervals would be (1.15*(4+3)*10000)*(60/10)*60*24/2, which is approximately 332 MB per day.

ArchestrA System Platform Installation Guide

60 Chapter 5 Historian Server Requirements and Recommendations

The disk usage per day for 10,000 discrete tags (that is, Storage Size = 1 byte) that are changing, on average, every 60 seconds would be (1.15*(1+3)*10000)*(60/60)*60*24/2, which is approximately 32 MB per day. The disk usage per day for 10,000 8-byte string tags (that is, Storage Size = 8 bytes) that are changing, on average, every 60 seconds would be (1.15*(8+3)*10000)*(60/60)*60*24/2, which is approximately 87 MB per day.

Variable-Length String Storage Requirements

For strings of variable length that are 128 characters or more, the number of bytes required for storage will be the actual number of characters being sent from the data source + 5 bytes, plus 15% overhead. Therefore, the average disk usage per day for a variable-length string that is receiving an average of 'N' characters per sample could be calculated using the following formula: Estimated average disk usage per day = (1.15 *(N+5)*number of tags) * (60/average storage rate in seconds) * 60 minutes * 24 hours / (NTFS compression ratio) For example, the disk usage per day for 10,000 131-byte string tags that are changing, on average, every 60 seconds and the average incoming value is 60 characters in length would be (1.15*(60+5)*10000)*(60/60)*60*24/2, which is approximately 513 MB per day. The use of variable-length strings also has an impact on memory. For more information, see Chapter 5, "Data Storage Subsystem," in the Wonderware Historian Concepts Guide.

ArchestrA System Platform Installation Guide

Performance Considerations61

Performance Considerations
For a complete Wonderware Historian system, the following components put a demand on memory.

Internal historian subsystems, such as the Configuration

Manager, data acquisition, and data storage

The associated Microsoft SQL Server The operating system Client access (data retrieval), which includes caching
When determining the amount of memory to purchase, remember that adding more memory is the cheapest and easiest thing that you can do to improve performance. Increasing the amount of memory reduces the amount the server has to use virtual memory, thus lowering the load on the storage subsystem. Even if you have a large amount of memory, additional memory is used as additional disk cache, speeding up disk access and therefore file service. Also, processes needed by the server become faster because they are memory-resident. A major factor in system performance is the amount of plant data you anticipate storing in the system, including considerations about how often that data is stored and retrieved. In general, the more you store, the more often you store it, and the more you retrieve it, the slower the system. The major storage factors affecting the performance of the system are:

Effective analog flow rate (analog updates per second). Period of online data storage required. Effective discrete variable flow rate. Number of concurrent end users required. Complexity of end user queries. Number and size of string tags, as well as the effective flow rate of
string values.

Number and duration of string tag retrieval queries, as well as the

frequency at which these queries are executed. A performance report for different historian systems is provided in "System Sizing Examples" on page 73.

ArchestrA System Platform Installation Guide

62 Chapter 5 Historian Server Requirements and Recommendations

Server Loading
When a user connects to the Wonderware Historian with a client, configuration information is immediately requested from the historian. This information includes the tags that the server stores, their descriptions, engineering units, and other tag data. SQL Server reads this information from the database (stored on disk) and places it in memory. As the user selects time periods to trend, the historian reads data from files located on the disk and prepares the results of the client's data request to be transmitted back to the client. The ability of the server to quickly handle subsequent requests for data from the same client and others is dependent on the server's ability to keep as much information in memory without having to again access data from the disk. As a higher load is placed for memory, a higher load is placed on the disk I/O system as the server has to use disk caching and read from the data files. The following table summarizes the loading for various systems.
System Load Description

Acquisition and storage Retrieval

Base load of the historian. This load exists as long as the system is running. However, this load is not affected by client activity. Variable loading caused by data retrieval from client applications. When the client initially connects, the data requested is configuration data, which is stored in SQL Server. The historian requests data from SQL Server, causing its loading to increase. As the client requests historical data, the disk time increases as information from the data files is transferred to memory. This continues as the client requests additional data. If the client application requests data that has already been transferred to memory, there is no associated disk activity and transfer of data to memory.

The server must be able to adequately handle the variation on loading caused by the client applications. To accomplish this, make sure that your hardware is sized so that it can handle the base load created by the acquisition and storage systems and that there are adequate resources still available for the retrieval system.

ArchestrA System Platform Installation Guide

Performance Considerations63

IDAS Performance
An IDAS can acquire an unlimited number of real-time data values, from an unlimited number of I/O Servers, each with an unlimited number of topics. However, IDASs are subject to the following limitations.

The maximum sustained data throughput for any single IDAS is

30,000 items per second for real-time data. For late or old data, the maximum throughput is 9,000 items per second. The total combined throughput (real-time data plus late or old data) cannot exceed 30,000 items per second. For higher-volume applications, you can set up multiple IDASs to serve a single storage subsystem.

The size of any data value is limited to 64,000 bytes. The maximum number of tags supported by any single IDAS is
30,000.

Tiered Historians
If you are installing a tiered historian, tier 1 nodes use the same basic configuration for the number and types of tags and data collection rates. The tier 1 configuration should be delta data collected and stored:

12,000 analog tags every 2 seconds 2,900 discrete tags every 2 seconds 100 32-character string tags every 30 seconds
For the analog and discrete tags, the averages and value state aggregates are:

6000 tags with an hourly calculation performed at the top of each

hour

6000 tags with 1-minute calculations performed at the top of each

minute plus

1500 tags replicated (not aggregated) in tier 2 1500 tags stored only in tier 1 (no aggregates or replication)

ArchestrA System Platform Installation Guide

64 Chapter 5 Historian Server Requirements and Recommendations

Storage Subsystem Performance

The storage subsystem can support a continuous data acquisition rate of 30,000 updates per second. The storage sub-system also supports a burst rate of 60,000 updates per second up to 1 second. The storage subsystem processes all real-time data as a high-priority task that is never interrupted. However, data received from "manual" methods (such as UPDATE/INSERT commands, CSV file imports, or store-and-forward) is handled by a low priority task. If the system is generally busy, then it may take some time for the manual data to be posted.

Networking Recommendations
The Wonderware Historian is a highly configurable package that can be set up in many different ways depending on your needs. The historian can use any protocol currently supported by Microsoft SQL Server 2008. You can use the default Microsoft SQL Server 2008 protocol (named pipes) with TCP/IP. TCP/IP is required if SuiteLink is used.
Note: If the historian is running on the Windows Server 2003 or later operating system, DDE is not supported.

It is highly recommended that you run the historian on a dedicated computer. For example:

Do not use the historian computer as a domain controller, mail

server, or an Internet server.

Do not use the historian computer as a workstation. Do not use the historian computer for InTouch HMI software,
InControl, or other Wonderware products.

ArchestrA System Platform Installation Guide

Networking Recommendations65

Generally, it is recommended that you split the process and IS networks to ensure that the process network does not become overloaded. The following illustration shows one possible network architecture where the historian is the link between the process network and the business LAN/WAN:

For this architecture, install two network cards on a server computer and configure them to segment the IS network from the process network.
Note: All tags to be stored in historian are on "advise" all the time. This may cause heavy load conditions on the process network. Before you install the historian, investigate the possible load impact of installing the historian on your network.

ArchestrA System Platform Installation Guide

66 Chapter 5 Historian Server Requirements and Recommendations

Client Access
All clients should connect to the Wonderware Historian using the default Microsoft SQL Server connection. Usually, this means using the name of the computer on which the historian is running as the server name when logging on.

Client Connections to the Wonderware Historian

The Wonderware Historian and its clients consume both Windows operating system connections and SQL Server connections in the following ways:

Wonderware Historian: When the historian itself is running

without the event subsystem, it uses six database connections and zero Windows connections.

System Management Console: Each open System Management

Console consumes one database connection, and each remote System Management Console also consumes a Windows connection.

Event System: Each different time interval for event tags uses a
database connection and zero Windows connections. For example, if there are 15 event tags with time interval of 30 minutes, and 10 event tags with an interval of 60 minutes, that consumes two connections. The event subsystem uses zero Windows connections.

Local IDAS: Consumes no connections. Remote IDAS: Each remote IDAS uses one Windows connection
and zero database connections.

Wonderware Application Server Platform: A platform

configured to historize data consumes a Windows connection and a database connection.

Wonderware Application Server Engine: Each Engine

configured to historize data will consume a database connection.

Historian Client applications and controls: Each Historian

Client application or control consumes a database connection for each specified server, and each remote node consumes a Windows connection. Certain versions of the operating system and SQL Server impose connection limits or workload limits. For more information, see "Client Connection and Workload Limits" on page 67.

ArchestrA System Platform Installation Guide

Client Access67

Client Connection and Workload Limits

Small historian applications can use a Wonderware Historian that is running on Windows XP Professional. However, only small applications are supported because of the performance limitations imposed by the operating system and by Microsoft SQL Server.

Operating System Limitations

Microsoft limits the number of concurrent client connections to the "desktop" versions of their operating systems. For Windows, a "connection" is access to any service on the computer (for example, file sharing, print services, Terminal Services, remote access, authentication, and any connection through a named pipe). These connections are specific to the client computer, so if NodeA is accessing print services and a shared directory on NodeB, that counts as a single connection to NodeB. The Windows XP Professional operating system rejects all connections above the 10-connection limit. More details on this limitation are available in Microsoft Knowledge Base article 314882.

Network Protocols for Clients

To change the default network protocol used by Microsoft SQL Server to something other than named pipes, configure the client network access using the SQL Server Client Network Utility. For more information, see your Microsoft SQL Server documentation.

ArchestrA System Platform Installation Guide

68 Chapter 5 Historian Server Requirements and Recommendations

Licensing
The Wonderware Historian requires a valid license to run. Use the ArchestrA License Utility to manage licenses and associated feature lines. The historian allows functionality based on the presence of a valid license file and/or feature lines. The historian checks that:

A valid license file exists at the expected location on disk. One or more feature lines relevant to the product is contained in
the license file. A feature line defines specific behavior that is allowed for the product. Typically, feature lines are bundled together according to predefined licensing schemes. If a valid license file cannot be found, or if the file does not contain the appropriate feature lines, the historian is considered to be unlicensed. If unlicensed, the historian starts up and runs for an unlimited period of time. However, data is only collected and stored for system tags. The historian reads the license file and appropriately updates the system behavior when:

The historian starts. You commit changes to the system using the System Management
Console.

You refresh the license information using the System Management

Console. Unless noted, all aspects of historian licensing are dynamic. That is, you can make licensing changes during run time, and the system runs uninterrupted. The following feature lines are available:

Historian_Tagcount Feature Line Historian_ServerOS Feature Line Historian_RemoteIDASCount Feature Line Historian_ModifyHistoryData Feature Line Historian_HistoryDuration Feature Line Historian_Processors Feature Line
Use the System Management Console to view license and feature line information relevant to the historian. For more information, see "Viewing License Information" in Chapter 9, "Viewing or Changing System-Wide Properties," in the Wonderware Historian Administration Guide.

ArchestrA System Platform Installation Guide

Licensing69

Historian_Tagcount Feature Line

The Historian_Tagcount feature line specifies the number of tags for which the Wonderware Historian acquires and stores data. The tag count feature line does not restrict the number of tag definitions you can create in the database (just the tags for which data is acquired and stored). System tags and event tags are not included in the tag count. If this feature line is absent, or if no license file is found, the tag count defaults to 0. For a licensed tag count of n, the historian recognizes only the first n non-system tags it reads from the database, in whatever order the database presents the tags to the Wonderware Historian Configuration service. For example, if you have a licensed tag count of 500, only the first 500 non-system tags are licensed for data collection and storage. If the tag count feature line in the license file changes, the run-time behavior of the historian does not change until you refresh the license information or a system restart occurs. If the tag count is increased, the historian starts acquiring and storing data for the additional tags, if they exist in the database. If the tag count is decreased, the historian stops acquiring and storing data for all tags except for the system tags and the first n tags in its list, where n denotes the tag count.

Historian_ServerOS Feature Line

The Historian_ServerOS feature line controls whether the installed version of the Wonderware Historian is licensed to run on one of the following Microsoft server operating systems:

Windows Server 2003 Enterprise R1/R2 SP2 Windows Server 2003 Standard Edition R1/R2 SP2 Windows Server 2008 Standard or Enterprise Editions SP2 (32 or
64-bit)

Windows Server 2008 R2 Standard (64-bit)

If the historian is installed on a server operating system, and this feature line is present in the license file, the historian runs with full functionality as defined by the other feature lines in the license file. If the feature line is not found, the behavior is the same as for the regular version of the historian running as unlicensed.

ArchestrA System Platform Installation Guide

70 Chapter 5 Historian Server Requirements and Recommendations

Historian_RemoteIDASCount Feature Line

The Historian_RemoteIDASCount feature line controls the maximum number of remote IDASs that can be used by the historian. The remote IDAS count feature line does not restrict the number of remote IDAS definitions you can create in the database. If this feature line is 0, then there is no limit on the number of remote IDASs. If the remote IDAS count feature line does not exist, or if the license file is not found, no remote IDASs are allowed. If the remote IDAS count is n, the historian uses the local IDAS, plus the first n remote IDASs defined in the historian database. The local IDAS is identified as the IDAS having the same computer name as the historian computer. For example, if the feature line is equal to 2, then the local IDAS and the first two defined remote IDASs are used. Any remaining remote IDASs defined in the database (plus all I/O Servers, topics, and tags associated with these IDASs) are ignored. Information pertaining to an unlicensed remote IDAS (including corresponding I/O Servers and topics) does not appear in the System Management Console. The tag count feature line is applied after the remote IDAS feature line. If the license file allows all remote IDASs defined in the database to be used, but not all of the tags in the database, the historian uses all IDASs, including their associated I/O Servers and topics, but only acquires and stores data for the allowed number of tags. If the remote IDAS count feature line in the license file changes, the runtime behavior of the historian does not change until you refresh the license information or a system restart occurs. If the remote IDAS count is increased, the historian starts acquiring and storing data from the additional remote IDASs, if they exist in the database. If the remote IDAS count is decreased, the historian stops acquiring and storing data for all tags assigned to defined remote IDAS n+1 and higher, where n denotes the remote IDAS count. For the IDAS failover feature, the remote IDAS count is applied as follows:

The local IDAS is counted only once, even if it has a failover node
configured. At runtime, the failover IDAS (which must be on a remote node), does NOT run unless a valid license for at least one remote IDAS is present.

Each remote IDAS configured in the database is counted only once,

even if it has a failover node configured.

ArchestrA System Platform Installation Guide

Licensing71

Historian_ModifyHistoryData Feature Line

The Historian_ModifyHistoryData feature line controls whether history data modifications are allowed. The data modification feature line controls whether you can modify history data via SQL queries (inserts or updates) and CSV file imports (both normal CSV imports and "fast load" CSV imports).

If the feature line is present, all CSV file import operations, as well
as SQL inserts and updates, are permitted.

If the feature line is not detected, all attempted operations

involving SQL inserts and updates and CSV file imports (including FastLoad) are not allowed. If disallowed, SQL insert queries and update queries return an appropriate message to the client stating that the license excludes this functionality. For CSV file imports and fast load file imports, a warning message is logged when a file is first placed in the historian import folder. The warning message states that the license excludes this functionality.

Historian_HistoryDuration Feature Line

The Historian_HistoryDuration feature line controls the maximum number of days in history, starting with the current day, for which data can be retrieved from the Wonderware Historian. For example, if the history duration is 50, you can only retrieve data that was stored during the last 50 days. If this feature line is 0, then there is no limit on retrieving data. If this feature line is missing, the default is seven days. If you attempt to retrieve data for a period of time starting before the earliest time indicated by this feature line, the start time for the data retrieval is reset to the earliest time allowed by the feature line. This feature line has no impact on data storage in the Wonderware Historian.

Historian_Processors Feature Line

The Historian_Processors feature line controls the maximum number of processors (CPUs) allowed in the Wonderware Historian computer. This feature line has no impact on the operation of remote IDASs or other remote clients of the historian. If this feature line is absent, a maximum of one processor is assumed. If the actual number of processors in the historian computer is less than or equal to the number of processors specified in the feature line, the historian is considered to be licensed.

ArchestrA System Platform Installation Guide

72 Chapter 5 Historian Server Requirements and Recommendations

Hyperthreaded and multi-core CPUs are supported and recommended. From a licensing perspective, a "processor" is the physical "package" and a multi-core or a hyperthreaded processor is counted as a single processor.

Support for Non-English Operating Systems

The English version of Wonderware Historian, the Wonderware Historian Database Export/Import Utility, and the InTouch History Importer run on localized versions of all the supporting operating systems for the following languages. Also, the corresponding version of Microsoft SQL Server for the required language must be used.

German French Japanese Simplified Chinese

The following entities are not supported in double-byte languages:

Domain names, user names, and passwords (including SQL Server

login names and passwords).

Names of I/O Server host machines, I/O Server application names,

topic names, and item names.

Any text associated with licensing.

Integration with Other Wonderware Products

The Wonderware Historian is Wonderware's open relational database for plant and process data. Many of the features of the historian allow it to be used with many of Wonderware's other products. The historian can store data from any application that supports DDE or SuiteLink. Examples of Wonderware applications that can send data to the historian are Wonderware Application Server, I/O Servers, and InTouch WindowViewer.
Note: If the historian is running on the Windows Server 2003 or later operating system, DDE is not supported.

Any client application that can retrieve information using SQL can retrieve data from Wonderware Historian. For example, some Wonderware products that can retrieve data by means of SQL queries are the InTouch HMI, Wonderware Information Server, Historian Client applications and controls, SPCPro, Manufacturing Execution Module, and InBatch products. The historian further extends SQL to improve the ability to handle time series data.

ArchestrA System Platform Installation Guide

System Sizing Examples73

Also, Wonderware Historian I/O Server (aahIOSvrSvc.exe) is an interface for clients to access current data values a historian by means of the SuiteLink protocol. The Wonderware Historian I/O Server can update items with current values for given topics, providing "real-time" I/O Server functionality. Finally, you can use InTouch to configure the historian by importing tag definitions and I/O Server definitions from the InTouch Tagname.x file into the Runtime database.

System Sizing Examples

To help you determine how to size your system, performance reports are provided for different Wonderware Historian configurations.
Important: The information presented here is a guideline only. The actual results in your environment may vary.

Process (Non-Tiered) Historian Sizing Examples

Performance reports are provided for various levels of a single process (non-tiered) Historian.

Server 1: 2.4 GHz Single Processor Quad-Core CPU

Wonderware Historian Specifications

DELL OptiPlex 755 with 2.4 GHz single processor quad-core CPU 4 GB RAM 512 MB Virtual Memory 1 Gbps NIC Windows XP Professional SP2 Microsoft SQL Server 2005 Standard Edition SP3 SQL memory clamped @ 512 MB 12-hour history block duration
Tag Information

Tag count (total) = 5,187 Analog tags = 2,607 Discrete tags = 2,285 String tags = 295

ArchestrA System Platform Installation Guide

74 Chapter 5 Historian Server Requirements and Recommendations

Manual tags = 17 Update rate of +/- 5,000 updates/second

Remote IDAS

None.
Event Information

3 snapshot events, each having: 1 analog snapshot 1 discrete snapshot 1 string snapshot 2 summary events, each having: 1 AVG calculation (1 tag every 8 hours) 1 MAX calculation (1 tag every 8 hours) 1 MIN calculation (1 tag every 8 hours) 1 SUM calculation (1 tag every 8 hours) 1 SQL insert every 4 hours 2 SQL multi-point updates every hour
Query Load

For the following seven queries, each are occurring at different times in the hour:

1 query (trend): live mode - 1 second update 1-hour duration 10 tags (7 analogs, 3 discretes) 1 query: 1-hour range / hour (1 tag) 4 queries: 15-minute range / hour (1 tag) 1 query: 24-hour report every 24 hours (25 to 30 tags)

ArchestrA System Platform Installation Guide

System Sizing Examples75

Performance Results Category Value

Average CPU load (%) Wonderware Historian memory (Private Bytes) consumption (MB) Number of online history blocks Uncompressed hard drive disk space per history block (MB)

4.74 138 207 925

Server 2: Four Dual-Core 2.7 GHz CPUs

Wonderware Historian Specifications

DELL Precision WorkStation T5400 with four dual-core Intel Xeon

2.7 GHz CPUs

4 GB RAM 3072 MB Virtual Memory 1 Gbps NIC Windows 2003 Standard Server Microsoft SQL Server 2005 Standard Edition SP3 SQL memory clamped @ 1024 MB 4-hour history block duration
Tag Information

Tag count (total) = 63,000 Analog tags = 39,359 Discrete tags = 19,734 String tags = 295 Manual tags = 5,057 Update rate of +/- 30,000 updates/second

ArchestrA System Platform Installation Guide

76 Chapter 5 Historian Server Requirements and Recommendations

Remote IDAS

One remote IDAS:

P4 1.7 GHz 1 GB RAM 34,000 tags via the remote IDAS and the rest via the local IDAS
Note: Because this configuration was used for performance and stress testing, the remote IDAS tag count is more than the recommended 30,000 maximum. Event Information

3 snapshot events, each having: 1 analog snapshot 1 discrete snapshot 1 string snapshot 2 summary events, each having: 1 AVG calculation (1 tag every 8 hours) 1 MAX calculation (1 tag every 8 hours) 1 MIN calculation (1 tag every 8 hours) 1 SUM calculation (1 tag every 8 hours) 1 SQL insert every 4 hours 2 SQL multi-point updates every hour
Query Load

For the following seven queries, each are occurring at different times in the hour:

1 query (trend): live mode - 1 second update 1- hour duration 10 tags (7 analogs, 3 discretes) 1 query: 1-hour range / hour (1 tag) 4 queries: 15-minute range / hour (1 tag) 1 query: 24-hour report every 24 hours (25 to 30 tags)

ArchestrA System Platform Installation Guide

System Sizing Examples77

Performance Results Category Value

Average CPU load (%) Wonderware Historian memory (Private Bytes) consumption (MB) Number of online history blocks Uncompressed hard drive disk space per history block (GB)

9.89 680 104 2.47

Server 3: Four Dual-Core 3.4 GHz CPUs

Wonderware Historian Specifications

DELL PowerEdge 6800 with four dual-core Intel Xeon 3.4 GHz
CPUs

16 GB RAM 4096 MB Virtual Memory 1 Gbps NIC Windows 2003 Enterprise Server Microsoft SQL Server 2005 Standard Edition SP3 SQL memory clamped @ 3967 MB 2-hour history block duration
Tag Information

Tag count (total) = 133,941 Analog tags = 73,600 Discrete tags = 53,560 String tags = 6920 Update rate of +/- 50,000 updates/second
MDAS

In the total tag count, 4009 tags originated from Wonderware Application Server.

ArchestrA System Platform Installation Guide

78 Chapter 5 Historian Server Requirements and Recommendations

Remote IDAS

Two remote IDASs:

Remote IDAS 1: P4 1.9 GHz, 1 GB RAM Remote IDAS 2: P4 2.5 GHz, 512 MB RAM
44,370 tags via the remote IDAS 1 45,584 tags via the remote IDAS 2 44,383 tags via the local IDAS
Note: Because this configuration was used for performance and stress testing, the remote IDAS tag counts are more than the recommended 30,000 maximum. Event Information

3 snapshot events, each having: 1 analog snapshot 1 discrete snapshot 1 string snapshot 2 summary events, each having: 1 AVG calculation (1 tag every 8 hours) 1 MAX calculation (1 tag every 8 hours) 1 MIN calculation (1 tag every 8 hours) 1 SUM calculation (1 tag every 8 hours) 1 SQL insert every 4 hours 2 SQL multi-point updates: 1 every 15 minutes 1 every 30 minutes
Query Load

For the following seven queries, each are occurring at different times in the hour:

1 query (trend): live mode - 1 second update 15-minute duration 15 tags (10 analogs, 5 discretes) 1 query: 1-hour range / hour (1 tag)

ArchestrA System Platform Installation Guide

System Sizing Examples79

4 queries: 15-minute range / hour (1 tag) 1 query: 24-hour report every 24 hours (25 to 30 tags)
Performance Results Category Value

Average CPU load (%) Wonderware Historian memory (Private Bytes) consumption (MB) Number of online history blocks Uncompressed hard drive disk space per history block (average GB)

13.9 1,478 470 1.73

SCADA (Tiered) Historian Sizing Examples

Performance reports are provided for various levels of a multiple Historian SCADA configuration.

Topology 1: Centralized Tiered Historian Topology on a Slow/Intermittent Network

This topology consists of ten tier-1 historians performing simple and summary replication of the same tags independently to two tier-2 historians. This topology is targeted to reflect the requirements of geographically distributed SCADA applications operating on slow and intermittent networks.

ArchestrA System Platform Installation Guide

80 Chapter 5 Historian Server Requirements and Recommendations

The 400 Kbps data transfer limit reflects a typical data transfer speed between remote locations over the Internet. The data transfer from each tier-1 historian to a tier-2 historian is assumed to be through a dedicated 400 Kbps connection; multiple tier-1 historians do not share the same 400 Kbps connection. It is assumed that the 400 Kbps is a bandwidth that can be fully used.
Tier 2 Historian Specifications

DELL PowerEdge 6800 with four dual-core Intel Xeon 3.4 GHz
CPUs

16 GB RAM with enabled PAE or 4 GB RAM Disk I/O subsystem of a 100MB/s throughput, 6 ms access time. 100/1000 Base-T network card 400 Kbps network connection (actual usable bandwidth)
Tier 1 Historian Specifications

DELL Precision WorkStation T5400 with dual processor quad-core

Intel Xeon 2.7 GHz CPUs

4 GB RAM Disk I/O subsystem of a 60MB/s throughput, 16 ms access time. 100/1000 Base-T network card
Loading Information

Assume that the total tag count on the tier-1 historian is 15,000. The tier-1 historian receives 15,000 tags from I/O Servers of the following types and data rates:

12,000 4-byte analog delta tags changing every 2 seconds: (10,000

always fitting the real-time window and 2,000 falling outside of the real-time window being 50 minutes late).

2,800 1-byte discrete delta tags changing every 2 seconds 200 variable-length string delta tags of 32-character length
changing every 30-seconds The tier-2 historian stores the following:

6,000 tags with hourly analog summary calculations performed at

the top of each hour (using 6,000 4-byte analog tags as tier-1 tags)

Another 6,000 tags with 1-minute analog summary calculations

performed at the top of each minute (using 6,000 4-byte analog tags as tier-1 tags)

ArchestrA System Platform Installation Guide

System Sizing Examples81

1,500 tags replicated (as simple replication) to tier-2 (using 1,400

1-byte discrete tags and 100 variable-length string delta tags as tier-1 tags)

Another 1,500 tags only stored on tier-1 (using 1,400 1-byte

discrete tags and 100 variable-length string delta tags as tier-1 tags)
Performance Results for the Tier-2 Historian Category Value

Average CPU load (%) (with no queries executing) Wonderware Historian memory (Virtual Bytes) consumption (GB) Number of online history blocks Uncompressed hard drive disk space per history block (average MB)
Latency Results Category Value

1% 3.05 GB 312 888 MB

Fastload (1 day fastload) Simple replication Summary replication

10.33 hours 4 seconds 4.6 seconds

Latency is the difference in time between when the value is received by the tier-1 historian and when it is received by the tier-2 historian.

ArchestrA System Platform Installation Guide

82 Chapter 5 Historian Server Requirements and Recommendations

Topology 2: Centralized Tiered Historian Topology for a Single Physical Location

A 100 Mbps data transfer limit reflects a typical data transfer speed within one location, but distributed over several buildings. In this case the 100 Mbps bandwidth is a physical characteristic of the connection. It is assumed that up to 33% of that physical bandwidth can be used.

Tier-2 Historian 100-Base T

Tier-2 Historian

Tier-1 Historians (standard configurations)

Tier 2 Historian Specifications

DELL PowerEdge 6800 with four dual-core Intel Xeon 3.4 GHz
CPUs

16 GB RAM with enabled PAE or 4 GB RAM Disk I/O subsystem of a 100MB/s throughput, 6 ms access time. 100/1000 Base-T network card 100 Kbps network connection (actual usable bandwidth)
Tier 1 Historian Specifications

DELL Precision WorkStation T5400 with dual processor quad-core

Intel Xeon 2.7 GHz CPUs

4 GB RAM Disk I/O subsystem of a 60MB/s throughput, 16 ms access time. 100/1000Base-T network card
Loading Information

Assume that the total tag count on the tier-1 historian is 15,000. The tier-1 historian receives 15,000 tags from I/O Servers of the following types and data rates:

ArchestrA System Platform Installation Guide

System Sizing Examples83

12,000 4-byte analog delta tags changing every 2 seconds: (10,000

always fitting the real-time window and 2,000 falling outside of the real-time window being 50 minutes late).

2,800 1-byte discrete delta tags changing every 2 seconds 200 variable-length string delta tags of 32-character length
changing every 30-seconds The tier-2 historian stores the following:

6,000 tags with hourly analog summary calculations performed at

the top of each hour (using 6,000 4-byte analog tags as tier-1 tags)

Another 6,000 tags with 1-minute analog summary calculations

performed at the top of each minute (using 6,000 4-byte analog tags as tier-1 tags)

1,500 tags replicated (as simple replication) to tier-2 (using 1,400

1-byte discrete tags and 100 variable-length string delta tags as tier-1 tags)

Another 1,500 tags only stored on tier-1 (using 1,400 1-byte

discrete tags and 100 variable-length string delta tags as tier-1 tags)
Performance Results for the Tier-2 Historian Category Value

Average CPU load (%) (with no queries executing) Wonderware Historian memory (Virtual Bytes) consumption (GB) Number of online history blocks Uncompressed hard drive disk space per history block (average MB)
Latency Results Category

1.55% 3.3 GB 312 888 MB

Value

Fastload (1 day fastload) Simple replication Summary replication

9.92 hours 1.65 seconds 1.51 seconds

Latency is the difference in time between when the value is received by the tier-1 historian and when it is received by the tier-2 historian.

ArchestrA System Platform Installation Guide

84 Chapter 5 Historian Server Requirements and Recommendations

Topology 3: Simple Tiered Historian Topology for a Modem Configuration

In a modem configuration, the network bandwidth between the tier-1 and the tier-2 historians is limited by 56 Kbps. Because the tag count and the replication data rate of the tier-1 historian should be very limited, it would be sufficient to consider only one tier-1 historian performing simple replication to one tier-2 historian over a modem network.

Tier-2 Historian

56 Kbps

Tier-1 Historian (modem configuration)

Tier 2 Historian Specifications

DELL Precision WorkStation T5400 with dual processor quad-core

Intel Xeon 2.7 GHz CPUs

4 GB RAM Disk I/O subsystem of a 60MB/s throughput, 16 ms access time. 100/1000Base-T network card 56K modem
Tier 1 Historian Specifications

OptiPlex 755 with single processor quad-core CPU 2.4 GHz 4 GB RAM Disk I/O subsystem of a 60MB/s throughput, 16 ms access time. 100/1000Base-T network card 56K modem

ArchestrA System Platform Installation Guide

System Sizing Examples85

Loading Information

In the tier-1 historian modem configuration, the tier-1 historian receives 3,000 tags from I/O Servers of the following types with average update rate 300 items per second:

1,500 4-byte analog delta tags (1,400 always fitting the real-time
window and 100 falling outside of the real-time window being 50 minutes late)

1,350 1-byte discrete delta tags 150 variable-length string delta tags of 32 bytes each
Performance Results for the Tier-2 Historian Category Value

Average CPU load (%) (with no queries executing) Wonderware Historian memory (Virtual Bytes) consumption (GB) Number of online history blocks Uncompressed hard drive disk space per history block (average GB)
Latency Results Category Value

1% 1.86 GB 30 43 MB

Fastload (1 day fastload) Simple replication Summary replication

n/a 5 seconds n/a

Latency is the difference in time between when the value is received by the tier-1 historian and when it is received by the tier-2 historian.

ArchestrA System Platform Installation Guide

86 Chapter 5 Historian Server Requirements and Recommendations

ArchestrA System Platform Installation Guide

87

Chapter 6 Historian Server Installation and Configuration

A complete Wonderware Historian system consists of the following software components:

Microsoft SQL Server Historian program files, database files, and history data files System Management Console, the configuration and control tool One or more local or remote IDASs (at least one must be defined) Wonderware Historian documentation.
You should have a definite plan for implementing the historian in your plant environment before you start the installation process. This plan should include the type of network architecture for the historian system, the amount of disk space required for data storage, and the amount of space required for the historian database files and log files. Also, any administrative security accounts that you specify for either the Microsoft SQL Server or the historian should be accounts that do not change often, if ever. In particular, do not change an administrative password during any part of the installation process. You must have administrative rights on the local computer to install the historian. The account with which you log on to the computer must also be a sysadmin for the SQL Server or you must be able to provide a sysadmin account for the SQL Server when prompted for it during the installation. For SQL Server 2008, computer administrators are not automatically added as SQL Server sysadmins by default.

ArchestrA System Platform Installation Guide

88 Chapter 6 Historian Server Installation and Configuration

The installation program detects any previous versions of the historian and notifies you of your migration options.

Microsoft SQL Server Installation

You need to install and run the required version of Microsoft SQL Server before installing the Wonderware Historian. A Microsoft SQL Server installation CD is included in your historian package. Configure the following Microsoft SQL Server options before installing the historian. If you already have Microsoft SQL Server installed, you can run the Microsoft SQL Server setup program to change these options. Microsoft SQL Server options should only be configured by a qualified Windows or SQL Server administrator. For more information, see your Microsoft SQL Server documentation.

Microsoft SQL Server 2005 or 2008 is required. Microsoft Client Utilities must be installed. The historian must run with the Microsoft SQL Server default
instance name (that is, the computer name).

Make sure that the x86 option is selected from the Options panel
before installing SQL Server. If SQL Server is installed as a native 64-bit application, it wont work with Wonderware Historian.

During the Database Engine Configuration step of the SQL Server

2008 installation, make sure to add the ArchestrA user account and/or the local Administrators group as authorized users.

Remote Microsoft SQL Servers are not supported by the historian. For networking support, use named pipes and any other support
required at your site. However, you must select at least named pipes and TCP/IP sockets (the defaults). It is highly recommended that you do not modify the default configuration for named pipes and TCP/IP sockets.

As you select the path to the data files, you must consider that the
historian Runtime database will grow, especially if you are going to use the event subsystem (including summaries) or storing data in the ManualAnalog, ManualDiscrete, or ManualString tables.

The Microsoft SQL Server services should be installed using the

local system account. The account you specify should be an account that does not change often, if ever.

For obvious security reasons, you should not use a blank password
for Microsoft SQL Server.

ArchestrA System Platform Installation Guide

Wonderware Historian Installation Features89

Both case-sensitive and case-insensitive SQL Servers are

supported. However, you should avoid mixing case-sensitive collations in tiered historian topologies.

The SQL Server e-mail functionality requires a Windows domain

user account. You can change the service account after SQL Server is installed. However, it is highly recommended that you use an account for which the password does not change often. For more information on SQL Server e-mail, see your Microsoft SQL Server documentation.

Wonderware Historian Installation Features

The Wonderware Historian installation program allows you to install some of the features of the system separately. The following table describes the various historian features that can be installed. The online help is installed with all the features. For information on hardware and software requirements for installing any of these features, see the Wonderware Historian Readme file..
Feature Description

Wonderware Historian IDAS

Installs or re-installs the historian, configuration tools and utilities, a local IDAS, and ActiveEvent. An IDAS, which can be used remotely. The IDAS is always installed if you select to install a complete historian. The server management tools include Wonderware Historian Configuration Editor and Wonderware Historian Management Console. Both of these applications are MMC snap-ins that are contained in the System Management Console. These tools are always installed on the same computer as the historian and can also be installed on a different computer on the network. The Wonderware Historian Database Export/Import Utility is also an installed configuration tool. ActiveEvent is an ActiveX control that allows you to notify the historian event system when an event has occurred in another application, such as InTouch HMI software.

Configuration Tools

ActiveEvent

ArchestrA System Platform Installation Guide

90 Chapter 6 Historian Server Installation and Configuration

About the Wonderware Historian Installation

The Wonderware Historian installation is performed in two phases. In the first phase, the installation program performs the following operations:

Deploys the common components, such as SuiteLink and the

License Viewer, unless they are already installed and validated.

Locates a running Microsoft SQL Server 2005 or 2008 on the local

computer.

Logs on to the installed Microsoft SQL Server using the account of

the person who is currently logged on. This account must be an administrative account on the local computer.

Checks for required disk space based on the features that you
select.

Creates the historian directories on the hard disk, installs program

files for the selected features, and registers components. For more information, see "Wonderware Historian Installation Features" on page 89.

Populates the historian program or startup group with icons.

The Database Configuration Utility automatically runs after the historian program file installation is complete. This utility:

Creates and/or configures the required databases. Creates the directory for the history data files (history blocks).
To install the Wonderware Historian for use in a tiered historian environment, install the Wonderware Historian on the individual computers, then implement them as described in Chapter 7, "Managing and Configuring Replication," in the Wonderware Historian Administration Guide. Use the ArchestrA System Platform installation program to install the entire system or any of the features. It is assumed that you are familiar with the installation options. The installation program does not log any errors that may occur. You must have administrative rights on the local computer to install the historian. The account with which you log on to the computer must also be a sysadmin for the SQL Server or you must be able to provide a sysadmin account for the SQL Server when prompted for it during the installation. For SQL Server 2008, computer administrators are not automatically added as SQL Server sysadmins by default.
Important: Do not install Wonderware Historian on a computer named INSQL, because this conflicts with the name of the Wonderware Historian OLE DB provider and the installation eventually fails.

ArchestrA System Platform Installation Guide

Configuring Databases and Data File Locations91

For detailed instructions on installing, see Chapter 1, "ArchestrA System Platform Installation." After the installation completes, configure the server using the instructions in "Configuring Databases and Data File Locations" on page 91. Refer the Readme file before using the historian.

Configuring Databases and Data File Locations

Use the Configurator to configure locations for the Wonderware Historian database and data files. Any supported version of Microsoft SQL Server must be installed and running on the local computer. The Configurator connects to the SQL Server using Windows authentication by default or you can enter SQL Login information. The system authenticates the credentials and connects to the SQL Server. The Configurator is for the Historian Server only. The other features such as IDAS, ActiveEvent, and Configuration tools do not have an associated Configurator. You can start the Configurator at any time using the Windows Start menu on the Historian computer.
Note: You must have administrative rights on the local computer to configure the historian. The account with which you log on to the computer must also be a sysadmin for the SQL Server or else you must be able to provide a sysadmin account for the SQL Server when prompted for it during the installation. For SQL Server 2008, computer administrators are not automatically added as SQL Server sysadmins by default.

ArchestrA System Platform Installation Guide

92 Chapter 6 Historian Server Installation and Configuration

To configure the databases and data file folders 1

Click Configure on the final installation dialog box. The Configurator dialog box appears. The product feature tree expands by default.

The Legend box shows the status indicators. The status indicators are:

Error

- Indicates that an error occurred during configuration. - Indicates that the feature is installed, but not configured.

Not Configured Warning

warnings.

- Indicates that configuration is complete, but with - Indicates that configuration completed - Indicates that the feature is not installed.

Configured
successfully.

Not Installed

ArchestrA System Platform Installation Guide

Configuring Databases and Data File Locations93

Click the Historian Server node. The Configurator dialog box appears. The prerequisite status check automatically starts.

In the Database Information area, configure the databases.

Database Path

Unless you have specific requirements, keep the default SQL Server database path. This is the path where the configuration database is deployed. Click the ellipsis button to specify a different directory in which to install the historian database files.
Data Path

Click the ellipsis button to specify a different directory for the historian history blocks. Make sure that you have a sufficient amount of available space on the drive you specify, because the plant data will be stored primarily in the path you specify in the Data Path box, which is used for history blocks. The SQL Server database files typically take less disk space.

ArchestrA System Platform Installation Guide

94 Chapter 6 Historian Server Installation and Configuration

If the database is created for the first time, then this option is not available. When re-configuration is done, then the Drop and Create New Database option is available. If you select this check box, then the existing database is dropped and a new database is created. If this check box is cleared, then the database would not be dropped, but will be configured for changes, if any.
4

Historian Database

In the Service Configuration area, configure options that pertain to components of the Historian that run as Windows services.
Replication TCP Port

If you are configuring a tiered historian server, enter the port number for tag replication between the tier 1 and tier 2 servers. You must enter the same port for all the tier 1 and tier 2 systems working together in the tiered configuration. The port you specify is added to the exclusions list of Windows Firewall.
Auto Start Historian

Automatically starts Wonderware Historian.

5

In the Start Applications area, click the appropriate button to start the License Manager or the InTouch Tag Importer. These buttons are not available until the server is successfully configured. In the SQL Login Information area, you can log on to the SQL Server if you have the "sysadmin" privileges enabled. You can select the Windows Authentication radio button to use the interactive users account or select SQL Server Authentication radio button and provide the credentials as required. This connection information is not stored and is used only for completing the configuration. When you click Connect, the connection to the SQL Server is tested.

In the Configuration Messages area, you can view the messages regarding prerequisite checks, current configuration state, and configuration activities that are logged.

ArchestrA System Platform Installation Guide

Configuring Databases and Data File Locations95

Click Configure. The Processing SQL Script dialog box appears. You can see the historian database configuration scripts running. Multiple scripts run during the configuration.

ArchestrA System Platform Installation Guide

96 Chapter 6 Historian Server Installation and Configuration

After the system finishes running the SQL scripts, the Wonderware Historian node and Historian Server node are shown with a green status indicator if the database is successfully configured.

Click All Messages to see all the configuration messages.

10 Click Close to exit the Configurator.

ArchestrA System Platform Installation Guide

Testing the Installation97

Testing the Installation

Test the Wonderware Historian installation to make sure that everything is installed correctly and is working properly.
To test the installation 1 2

Start the historian. Start the storage system and check that the system is receiving data from the system tags.

After the historian is installed, no additional configuration is required to run client tools against the server using named pipes. However, you may want to change the system or server configuration using the System Management Console

Antivirus Software
After installing the Wonderware Historian, configure your antivirus software to prevent archive files from being scanned. Also, antivirus software should not scan files in the following folders (ensure the sub folders of the listed directories are also excluded): The datapath that you enter in the Data Path field in the configurator while configuring the database. The default path is c:\Historian\Data\*.* c:\Program Files\ArchestrA\*.* c:\Program Files\Wonderware\*.* c:\Program Files\Common Files\ArchestrA\*.* c:\Program Files (x86)\ArchestrA\*.* c:\Program Files (x86)\Wonderware\*.* c:\Program Files (x86)\Common Files\ArchestrA\*.* For Windows XP Professional and Windows Server 2003 operating systems, the path is: c:\Documents and Settings\All Users\Application Data\ArchestrA\ For Windows Vista, Windows Server 2008, Windows 7 Professional, and Windows Server 2008 R2 operating systems, the path is: c:\ProgramData\ArchestrA\ For Windows XP Professional and Windows Server 2003 operating systems, the <SMC Logger Storage file path> is: c:\Documents and Settings\All Users\Application Data\ArchestrA\LogFiles

ArchestrA System Platform Installation Guide

98 Chapter 6 Historian Server Installation and Configuration

For Windows Vista, Windows Server 2008, Windows 7 Professional, and Windows Server 2008 R2 operating systems, the <SMC Logger Storage file path> is: c:\ProgramData\ArchestrA\LogFiles SQL Server database files of type: .mdf .ldf

Wonderware Historian Menu Shortcuts

The following Start menu shortcuts are created in the Start\Programs\Wonderware\Wonderware Historian folder.

Database Configuration Export and Import Import InTouch Historical Data Wonderware Historian Historian Books Online
In addition, the shortcut to the System Management Console appears in the Start\Programs\Wonderware folder.
Note: If you performed a complete historian installation, the System Management Console is configured so that the local SQL Server is already registered. However, if you only installed the client tools, the console is empty.

Repairing the Wonderware Historian

For a repair, the installation program automatically detects if you have an existing copy of the Wonderware Historian on your computer and then reinstalls missing or corrupt program files, registry keys, and shortcuts. For detailed repair instructions, see "Repairing an Installation" on page 28. To repair a database, use the Database Configurator. For more information, see "Configuring Databases and Data File Locations" on page 91.

ArchestrA System Platform Installation Guide

Modifying the Wonderware Historian Installation99

Modifying the Wonderware Historian Installation

You can modify the Wonderware Historian features that are already installed. For detailed modification instructions, see "Modifying an Installation" on page 25. To modify the disk directories for the database files and/or the history data files (history blocks), use the Database Configurator. For more information, see "Configuring Databases and Data File Locations" on page 91.

Uninstalling the Wonderware Historian

The uninstall program allows you to remove all the historian program files. The Runtime and Holding databases and the history blocks are not deleted. During the uninstall, you have the option to delete the configuration files (idatacfg_*.dat) created by IDAS and the Configuration Service. For detailed uninstall instructions, see "Uninstalling an ArchestrA System Platform Component" on page 30.

Upgrading from a Previous Version

You can upgrade to Wonderware Historian 10.0 SP1 from Wonderware Historian 9.0, Wonderware Historian 9.0 Patch01, Wonderware Historian 9.0 Patch02, and Wonderware Historian 10.0. No other versions are supported for direct upgrades.
Note: The Wonderware Historian was previously known as Wonderware IndustrialSQL Server.

About Upgrading to Wonderware Historian 10.0 SP1

You can directly upgrade from Wonderware Historian 9.0, Wonderware Historian 9.0 Patch01, Wonderware Historian 9.0 Patch02, and Wonderware Historian 10.0. It is possible to upgrade from earlier versions of Wonderware Historian, but you must first upgrade to the 9.0 version. Follow the instructions in the 9.0 documentation to perform the upgrade. After you have upgraded to the 9.0 historian, you can then upgrade to Wonderware Historian 10.0 SP1.

ArchestrA System Platform Installation Guide

100 Chapter 6 Historian Server Installation and Configuration

About Database Migration

The data in an existing Runtime database can be migrated to a new Runtime database. The old Runtime database is not deleted. Keep the old database until the Wonderware Historian migration is validated. There is no migration for the content of the Holding database, because this database is used only to temporarily hold data when importing an InTouch data dictionary. Not all of the system tags included in previous versions are included in version 10.0. Any configuration data associated with these obsolete system tags is not migrated. For the event subsystem, all SQL-based detectors and actions are migrated to the OLE DB syntax. If you have any custom SQL-based detectors or actions, you need to rewrite them using the OLE DB syntax. History data that is stored in SQL Server tables (not history blocks) can be migrated after the general upgrade has been performed. The scripts are created when you first run the database setup utility so that you can run them at any time. For Windows XP Professional and Windows Server 2003 operating systems, the default file path is: c:\Documents and Settings\All Users\Application Data\ArchestrA\Historian\Install\Scripts For Windows Vista, Windows Server 2008, and Windows 7 operating systems, the file path is: \ProgramData\ArchestrA\Historian\Install\Scripts

Upgrading from Wonderware Historian Version 9.0

If the Wonderware Historian 9.0 and IDAS 9.0 node are running on Windows 2003 SP2 and SQL Server 2005 SP3, then upgrading to Historian 10.0 SP1 occurs smoothly. The Wonderware Historian installation program detects the 9.0 Runtime database and prompts you to migrate or create the database.
To upgrade from Wonderware Historian 9.0 on Windows 2003 SP2 and SQL Server 2005 SP3 1 2

Back up the Runtime database. Shut down and disable Wonderware Historian 9.0 using the Management Console. Any remote sending data of IDAS to Wonderware Historian 9.0 will go into store-and-forward mode.

ArchestrA System Platform Installation Guide

Upgrading from a Previous Version101

Run the ArchestrA System Platform installation program to perform the upgrade. For more information, see "Upgrading an ArchestrA System Platform Component" on page 32. Migrate the 9.0 Runtime database or create the new database and finish the install. Restart the computer. Start the Historian. The Historian will start acquiring and storing the store-and-forward data from the existing remote IDASs. After the Historian Server node is upgraded, you can upgrade any remote IDAS nodes.

4 5 6 7

If Wonderware Historian 9.0 is not running on an operating system or SQL Server supported by Wonderware Historian 10.0 SP1, you cannot migrate the operating system or SQL Server. You will need to set up another computer.
To upgrade from Wonderware Historian 9.0 on a computer NOT running Windows 2003 SP2 and SQL Server 2005 SP3 1 2

Back up the Runtime database. Shut down and disable Wonderware Historian 9.0 using the Management Console. Any remote IDASs sending data to Wonderware Historian 9.0 will go into store-and-forward mode. Set up a computer with the desired supported operating system and SQL Server.

Make sure that you install all the necessary requirements. For
more information, see "Server Requirements" on page 51.

Select the same collation and sort order that was used for your
previous SQL Server installation. For more information, see "Microsoft SQL Server Installation" on page 88.
4 5

Restore the Runtime database using SQL Server database management tools. Run the ArchestrA System Platform installation program to perform the upgrade. For more information, see "Upgrading an ArchestrA System Platform Component" on page 32. The installation program detects the Runtime 9.0 database and prompts you to migrate the database or recreate the new database. The existing Runtime database is renamed to Runtime 9.0 and the version 10.0 SP1 database is created. If you chose to migrate, the utility runs the migration scripts (Migrate90To100.sql and MigrateSQLHistData90to100.sql) to transfer the historian configuration and history data from the old database. Finish the installation of Wonderware Historian.

ArchestrA System Platform Installation Guide

102 Chapter 6 Historian Server Installation and Configuration

8 9

Copy history blocks from the previous version to the new computer. Use the historian System Management Console to update the storage locations and system parameters to configure paths as per your new hardware configuration and the Runtime parameters as per your new implementation.

Upgrading from Wonderware Historian Version 10.0

If Wonderware Historian 10.0 and IDAS 10.0 are running on Windows 2003 SP2, SQL Server 2005 SP3, and SQL Server 2008 SP1, then upgrading to Historian 10.0 SP1 occurs smoothly.
To upgrade from Wonderware Historian 10.0 1

Shut down and disable Wonderware Historian 10.0 using the Management Console. Any remote IDAS nodes to Wonderware Historian 10.0 will go into store-and-forward mode. Run the ArchestrA System Platform installation program to perform the upgrade. For more information, see "Upgrading an ArchestrA System Platform Component" on page 32. The installation program detects the Runtime 10.0 database and prompts you to keep the existing database or recreate the new database. If you re-create the database, existing Runtime database will not be re-named but will be overwritten with a new Runtime 10.0 SP1 database. If you do not re-create the database, the existing database will remain intact. Finish the installation of Wonderware Historian. Restart the computer. Start the Historian. The Historian will start acquiring and storing the store-and-forward data from the existing remote IDASs. After the Historian Server node is upgraded, you can upgrade any remote IDAS nodes.

5 6 7 8

Note: While upgrading from 10.0, you will not be prompted for any kind of database migration. Database migration will only take place if you intend to upgrade Wonderware Historian 9.0, Wonderware Historian 9.0 P01, or Wonderware Historian 9.0 P02 to Historian 10.0 or Historian 10.0 SP1.

ArchestrA System Platform Installation Guide

Upgrading from a Previous Version103

Migration of History Data Stored in SQL Server

The normal SQL Server tables in the Runtime database contain configuration data and certain types of history data. History data that is stored in the normal SQL Server tables includes:

Data in the AnalogManualHistory, DiscreteManualHistory, and

StringHistory tables.

Event and summary data, which is stored in the EventHistory,

SummaryHistory, SummaryData, AnalogSnapshot, DiscreteSnapshot, and StringSnapshot tables. These tables can contain hundreds of thousands of rows, if not millions of rows. Depending of the amount of data to be migrated, migrating this data can take a few minutes to many hours, and in some cases, days.
Important: You MUST perform the database migration before the server goes back into production, because the history table content will be truncated. Be sure that you have disk space equivalent to two times the size of the Runtime database on the drive to which the history data will be migrated; otherwise, the migration may fail. Back up the Runtime database with the migrated configuration data before migrating the history data.

The scripts used to migrate the SQL Server history data can be found in the Wonderware Historian installation directory. By default, this directory is:
\Program Files\ArchestrA\Historian\Install\Scripts

The filename is: MigrateSQLHistData90to100.sql Do not attempt to migrate the data until you complete the upgrade to the Wonderware Historian 10.0. To migrate the data, execute these scripts using SQL Server Management Studio. You may prefer to run the script in blocks (that is, execute the syntax commands between the GO statements).

ArchestrA System Platform Installation Guide

104 Chapter 6 Historian Server Installation and Configuration

ArchestrA System Platform Installation Guide

105

Chapter 7 Wonderware Historian Client Requirements

You can use the Wonderware Historian Client software to address specific data representation and analysis requirements. The Wonderware Historian Client software maximizes the value of the data present in the Wonderware Historian and helps you organize, explore, analyze, present, and distribute process data in a variety of formats. With the Wonderware Historian Client software, you can:

Explore data graphically to find important information Analyze data Develop and execute ad hoc queries against any data stored in the
Wonderware Historian database

Visualize the current process state Produce rich automated reports, publish Trend charts and static
and dynamic Excel reports on the Wonderware Information Server portal.

ArchestrA System Platform Installation Guide

106 Chapter 7 Wonderware Historian Client Requirements

Wonderware Historian Client Components

The Wonderware Historian Client software comprises of tools that eliminate the need to be familiar with the SQL and provides intuitive point-and-click interfaces to access, analyze, and graph both current and historically acquired time-series data.

Desktop Applications
The Wonderware Historian Client software includes the following stand-alone applications:
Wonderware Historian Client Trend

Allows plotting of historical and recent data over time Allows you to compare data over different time periods
Wonderware Historian Client Query

Allows you to query the Wonderware Historian database Provides complex, built-in queries Eliminates the need to be familiar with the database structure or
SQL

Microsoft Office Add-Ins

The Wonderware Historian Client software includes the following add-ins to the Microsoft Excel and Microsoft Word applications.
Wonderware Historian Client Workbook

Allows display and analysis of historical and recent data from a

Wonderware Historian database using the Excel spreadsheet format
Wonderware Historian Client Report

Allows advanced reporting of historical and recent data from a

Wonderware Historian database using the Word document format

ArchestrA System Platform Installation Guide

Requirements and Recommendations107

ActiveX and .NET Controls

The aaHistClientTrend and aaHistClientQuery controls provide essential functionality of Wonderware Historian Client Trend and Wonderware Historian Client Query. You can use these controls in container applications, such as InTouch HMI software, Visual Studio (Visual Basic .NET or C#), and Internet Explorer. You can also use Wonderware Historian Client "building block" controls (such as aaHistClientTagPicker, aaHistClientTimeRangePicker, and so on) in your custom applications.

Requirements and Recommendations

You must log on to the computer as an administrator to install the Wonderware Historian Client software. Be sure that you read the hardware and software requirements in the Wonderware Historian Client Readme before starting the installation.

Hardware Requirements
The hardware requirements for installing the Wonderware Historian Client are described in the following table:
Minimum Server Requirement Recommended Server Requirement

Processor

1.2 GHz Pentium III or higher 512 MB RAM 55 MB

2 GHz or higher

Memory Disk Space

1 GB RAM or more 55 MB

Operating System Requirements

The following table lists the supported operating systems for the Wonderware Historian Client components:
Operating System Wonderware Historian Trend Wonderware Historian Query Wonderware Historian Workbook Wonderware Historian Report

Windows XP SP3 Windows 2003 SP2

Supported Supported

Supported Supported

Supported Supported

Supported Supported

ArchestrA System Platform Installation Guide

108 Chapter 7 Wonderware Historian Client Requirements

Operating System

Wonderware Historian Trend

Wonderware Historian Query

Wonderware Historian Workbook

Wonderware Historian Report

Windows Vista SP1 Windows 2008 Server Windows 7

Supported Supported Supported

Supported Supported Supported

Supported Supported Supported

Supported Supported Supported

You can visit the Microsoft Web site for instructions on installing the various supported operating systems.
Note: The Wonderware Historian Client components are supported on Microsoft Windows Vista and Windows 7 operating systems with the User Access Control enabled, and without running as an administrator.

Other Software Requirements

The following list describes the other third-party software requirements that support the Wonderware Historian Client software:

Microsoft .NET Framework 3.5 SP1 or later. If this version of the

.NET Framework is not installed on the computer, the installation automatically installs it for you.

Microsoft Word 2000 or later. Microsoft Excel 2000 or later.

Support for Operating System Language Versions

The English version of the Wonderware Historian Client software runs on the following operating system language versions:

English French German Japanese Simplified Chinese

Note: The SQL Server locale language must be the same as the operating system locale language.

ArchestrA System Platform Installation Guide

109

Chapter 8 Historian Client Installation and Configuration

The ArchestrA System Platform installation program allows you to install the Wonderware Historian Client software. The ArchestrA System Platform installation program copies the files from the setup DVD to the target computer. For more information on the components installed, see "Wonderware Historian Client Components" on page 106.

About the Wonderware Historian Client Installation

Before installing the Wonderware Historian Client software, log on to the computer as an administrator. Before copying the software files, the ArchestrA System Platform installation program checks for the basic system prerequisites. The ArchestrA System Platform installation program checks if a Microsoft Excel process is running. If Excel is running, a message appears informing you that an Excel process and the aaHistClientReportingService.exe service are running. To continue with the installation, you need to manually stop the services and click Retry. Click Close if you want to stop the installation.

ArchestrA System Platform Installation Guide

110 Chapter 8 Historian Client Installation and Configuration

When the aaHistClientReportingService.exe service stops, any scheduled reports for Wonderware Information Server will not be generated during the Historian Client installation. After the Historian Client installation completes, the aaHistClientReportingService.exe service needs to be started manually for the scheduled reports to get generated. This issue occurs if:

You install Wonderware Historian Client after installing

Wonderware Information Server.

An Excel scheduled report is published to the Wonderware

Information Server portal.
Note: In some cases, depending upon the operating system and the prerequisite, you may have to restart the system after the prerequisites are installed. In such cases, the setup automatically continues after the restart.

For instructions on installing the Wonderware Historian Client software files, see "Installing the ArchestrA System Platform" on page 13. After the Wonderware Historian Client software is installed on the computer, you must install the Language Packs manually.

Using Wonderware Historian Client Software with Roaming Profiles

If your network environment uses roaming user profiles, you must change a registry key so that changes to any Wonderware Historian Client software options are saved in the user profiles. To save software options in the roaming user's profile, add a DWORD key named "EnableRoaming" to the user's HKEY_CURRENT_USER\Software\ArchestrA \ActiveFactory registry folder and change its value to 1.

ArchestrA System Platform Installation Guide

Setting Up HTTP Access for Wonderware Historian Client Software111

Setting Up HTTP Access for Wonderware Historian Client Software

Wonderware Historian Client software can access data in the Wonderware Historian Server using HTTP instead of a normal TCP connection. For guidelines on using HTTP access, as well as limitations, see the Wonderware Historian Client Software User's Guide or the Wonderware Historian Client software Help file.
To set up HTTP Access for Wonderware Historian Client software 1 2

Install the Wonderware Historian Server. For installation information, see the Wonderware Historian Server documentation. Install Microsoft Internet Information Services (IIS). IIS can be installed on the same computer as the historian or on a different computer. If you use Windows authentication for HTTP access, SQLXML/IIS must be installed on the same computer as the Wonderware Historian Server. A single IIS Server can provide HTTP access to multiple SQL Servers, but at least one IIS Server is required to provide HTTP access to a SQL Server. For installation information, see the Microsoft documentation.

Note: For a single IIS Server to provide HTTP access to multiple SQL Servers, SQLXML must be separately installed for each SQL Server. If SQLXML is already installed and you attempt to install it again, you are not prompted to modify or repair the existing installation. Rather, a new installation starts for support of an additional SQL Server. 3

Install the Microsoft SQLXML software. For more information, see "Installing the Microsoft SQLXML Software" on page 112. The SQLXML software can only be uninstalled using the Add/Remove Programs application in Control Panel.

No software or special configuration is required on the client computer, other than what is generally required to support the Wonderware Historian Client software installation. When you configure the server connection from within a client application, you must specify the web server URL and virtual directory, as well as provide authentication credentials. For more information, see the Wonderware Historian Client Software User's Guide or the Wonderware Historian Client software Help file.

ArchestrA System Platform Installation Guide

112 Chapter 8 Historian Client Installation and Configuration

Installing the Microsoft SQLXML Software

You can install the Microsoft SQLXML software on the same computer on which the Microsoft SQL Server is installed (the same computer as the Wonderware Historian Server) or on a different computer. The installation program installs the SQLXML software and configures the IIS virtual directory for SQL Server. You must install IIS before installing the SQLXML software. If you use Windows authentication for HTTP access, SQLXML/IIS must be installed on the same computer as the Wonderware Historian Server.
To install the SQLXML software 1

Insert the Wonderware Historian Client software DVD into your DVD drive. In the \SQLXML directory of the DVD, double-click SQLXML.msi. The Welcome dialog box appears. Click Next. The License Agreement dialog box appears. Be sure that you understand the license agreement before installing. You cannot continue with the installation without consenting to the agreement.

To print out the license agreement, click Print License. If you accept the terms of the license agreement, click I accept
the License Agreement.

Click Next. The Enter the IndustrialSQL Server name dialog box appears.

In the IndustrialSQL Server box, type the name of the

Wonderware Historian Server that you want to access using HTTP.
4

Click Next. The Enter the Virtual Directory Name dialog box appears.

In the Virtual Directory box, type the name of the virtual

directory or accept the default virtual directory name.
5 6

Click Next. The Ready to Install the Application dialog box appears. Click Next to start the installation. The Updating System dialog box appears. When all of the files have been installed and configured, the final dialog box appears. Click Finish.

For more information on the configuration of the IIS virtual directory for SQL Server, see "Configuring an IIS Virtual Directory for SQL Server" in the Wonderware Historian Client Software User's Guide or the Wonderware Historian Client Help file. This information is provided for reference only.

ArchestrA System Platform Installation Guide

Repairing the Wonderware Historian Client Installation113

Repairing the Wonderware Historian Client Installation

You can use the ArchestrA System Platform installation program to repair corrupt files of the installed features. For more information, see "Repairing an Installation" on page 28.
Note: You can also use the standard Windows Add/Remove Programs feature from the Control Panel to repair the Wonderware Historian Client software installation.

Uninstalling Wonderware Historian Client

You can use the ArchestrA System Platform installation program to remove Wonderware Historian Client software that exists on your computer. For more information, see "Uninstalling an ArchestrA System Platform Component" on page 30.
Note: You can also use the standard Windows Add/Remove Programs feature from the Control Panel to remove the Wonderware Historian Client software installation.

Upgrading from a Previous Version

You can upgrade the following versions to Wonderware Historian Client 10.0 with SP2:

ActiveFactory 9.2 Wonderware Historian Client 10.0 Wonderware Historian Client 10.0 SP1
The upgrade program automatically backs up the product files, configuration, and user content before the upgrade occurs. When the installation detects the correct previous versions and prerequisite software, the upgrade starts. For more information, see "Upgrading an ArchestrA System Platform Component" on page 32.

ArchestrA System Platform Installation Guide

114 Chapter 8 Historian Client Installation and Configuration

ArchestrA System Platform Installation Guide

115

Chapter 9 Information Server Requirements and Recommendations

Wonderware Information Server provides enterprise-wide viewing of all information from the plant floor over the Internet or company intranet. You can use Wonderware Information Server together with Internet Explorer to view reports from a variety of data sources, including reports, documents, alarms, and historical and real-time information. You can also use Wonderware Information Server to view and interact with InTouch application windows that have been converted with the Win-XML Exporter or ArchestrA Web Exporter. These windows show all graphics and animation with real-time links to the factory floor, just as they do in InTouch WindowViewer, but they do not require InTouch to be installed on the client computer. The Wonderware Information Server uses the latest rendering technologies so that application windows developed in InTouch can be viewed over the Internet with better performance using only a browser. Wonderware Information Server is tightly integrated with Microsoft Internet Information Server. Working knowledge of Microsoft Internet Information Services, Microsoft SQL Server, and Windows operating systems is required. It is assumed that you are familiar with administering an Internet Information Server and using the administrative tools provided with Microsoft Windows operating systems. For more information on Internet Information Server, Microsoft SQL Server, and Microsoft Windows operating systems, see your Microsoft documentation.

ArchestrA System Platform Installation Guide

116 Chapter 9 Information Server Requirements and Recommendations

Other features of Wonderware Information Server include:

MultiViews, which are web displays that contain web-based

content, such as HTML pages or Extensible Markup Language (XML) code. This content is stored in reusable components called Web Parts.

Access panels, a logical grouping of navigation nodes (folders) and

links that is only accessible to particular users assigned to it.

The ActiveFactory Reporting Website, a collection of features that

provide a wide array of reporting capabilities from the Wonderware Historian (formally known as IndustrialSQL Server).

A reporting capability based on the Microsoft SQL Server

Reporting Services (SSRS). This feature lets you create, deploy, and execute SSRS reports within the Wonderware Information Server. There are also interface options available to trigger those reports from Wonderware Application Server and the Wonderware Historian.

Web Server Requirements and Recommendations

Your first step in deploying Wonderware Information Server is to install and configure the web server computer that hosts the Wonderware Information Server web site. In general, use a fast server-class computer with sufficient power to handle the expected load on the web site. Do not install Wonderware Information Server on a domain controller computer. This is not supported. Installing Wonderware Information Server is a three-step process:
1

Installing and configuring pre-requisite software, such as the operating system, Microsoft SQL Server, Internet Information Services (IIS), and so on. Installing the Wonderware Information Server product files. Configuring the Wonderware Information Server, so that it is ready for use.

2 3

For details on hardware requirements and the specific versions of required and supported software prerequisites, see the Readme file.

ArchestrA System Platform Installation Guide

Web Server Requirements and Recommendations117

Operating System Requirements

You can install Wonderware Information Server 4.5 on a server computer running any of the supported operating systems listed in the Readme file. Some operating systems require certain configuration before use with Wonderware Information Server. For more information, see "Guidelines for Installing Microsoft Operating Systems" on page 119.
Note: The MultiViews feature is not supported on Windows 7 and the 64-bit versions of Windows Server 2008 and Windows Server 2008 R2.

Software Requirements
You must install the following software on the web server computer before installing Wonderware Information Server. For details regarding the specific versions of required and supported software prerequisites, see the Readme file.

Microsoft Internet Information Services (IIS). For more

information, see "Guidelines for Installing IIS and ASP.NET" on page 126.

ASP.NET. For more information, see "Guidelines for Installing IIS

and ASP.NET" on page 126.

Microsoft SQL Server. For more information, see "Guidelines for

Installing Microsoft SQL Server" on page 122. ArchestrA Reports are not supported on SQL Server 2008 Express Edition.

To use Windows SharePoint, you must install Microsoft .NET

Framework. You may need to install the following additional software on the web server computer depending on the Wonderware Information Server features you install:

To install MultiViews feature, you must first install and configure

Windows SharePoint Services. For more information, see "Guidelines for Installing and Uninstalling SharePoint Services" on page 132.

To install the ArchestrA Reports feature, you must install and

configure Microsoft SQL Server Reporting Services on the same node as Wonderware Information Server. For more information, see "Guidelines for Installing Microsoft Reporting Services" on page 130.

To use ActiveFactory Reporting, you must install Microsoft Excel.

For all software, apply the latest patches.

ArchestrA System Platform Installation Guide

118 Chapter 9 Information Server Requirements and Recommendations

In addition, client users must be members of the same Windows domain, or a trusted domain, as the web server. You must install an ArchestrA Bootstrap on the Wonderware Information Server portal computer to support any process graphic that uses an ArchestrA reference to get data.

Using a Domain Controller with Wonderware Information Server

The purpose of a domain controller is to authenticate users in a Windows domain for security reasons. Wonderware Information Server is designed to take advantage of a domain controller for the following security functions:

Grant/deny users access to the site. If a user logged on to the

company network and is authenticated by the domain controller, the Wonderware Information Server handles that user as an authenticated login and then proceed to authorize the user according to the security role to which the user has been assigned. However, if a user attempts to access Wonderware Information Server from a computer that is not logged onto the network, a dialog box appears in which the user must provide a valid user name and password for the domain. After entering the appropriate information, the user is authenticated on the network by the domain controller and is granted or denied access. The use of domain logins to provide access is made possible by the use of integrated Windows security by Wonderware Information Server.

Assign user privileges within Wonderware Information

Server. Because Wonderware Information Server uses integrated Windows security, the product automatically connects to all the domains that it is a member of and returns a list of users already configured in that domain. This allows you to save time and effort when assigning role-based privileges for Wonderware Information Server. In addition, users are able to have one account and password to access the company network and Wonderware Information Server, instead of multiple names and passwords. Also, if you do not use a domain controller, Wonderware Information Server uses CPU resources to authenticate users instead of serving them web pages. Because of these benefits, it is recommended that you use an existing domain controller or install a new domain controller. This allows you to manage users in the company domain separately. For more information on domain controllers, see your Microsoft documentation or visit the Microsoft web site at www.microsoft.com.

ArchestrA System Platform Installation Guide

Guidelines for Installing Microsoft Operating Systems119

Using an Existing Domain Controller

If you already have a domain controller in place, you need to add the Wonderware Information Server computer to the domain as a resource. You can add the Wonderware Information Server computer to the domain in advance of deployment. When you deploy the Wonderware Information Server, the domain resource administrator should be present to verify proper connections to other domain resources, such as SQL Server, the Wonderware Historian, Wonderware Application Server, and InTouch computers.

Using Wonderware Information Server without a Domain Controller

If your company does not have a domain controller and does not have plans to upgrade and install a domain controller, you can still use Wonderware Information Server. However, the web server that Wonderware Information Server is installed on has to perform user authentication, and all users need to be created in the local user store on the web server. For information on adding local user accounts, see your Windows documentation. For more information on security, see the Wonderware Information Server Administration Guide.

Guidelines for Installing Microsoft Operating Systems

The following sections provide guidelines for installing the supported Microsoft operating systems. For the list of supported operating systems, see the Readme file.

Guidelines for Installing Microsoft Windows Server 2003

You can install Wonderware Information Server 4.5 on a server computer running a supported version of the Windows Server 2003 or Windows Server 2003 R2 operating system. The supported versions are documented in the Readme file. This operating system incorporates IIS as part of the default installation. The following instructions are provided as a guide and do not constitute the entire Windows Server 2003 setup that your company guidelines may require, or that you may encounter while installing the operating system software. These instructions only document specific options you need to configure during the installation.

Install the operating system on an NTFS partition. Install the defaults for Windows Server 2003 components. Select
the following IIS components:

ArchestrA System Platform Installation Guide

120 Chapter 9 Information Server Requirements and Recommendations

Common Files Documentation Internet Information Services Internet Services Manager (HTML) SMTP Service World Wide Web Service If you have decided not to use a domain controller (not
recommended), set up the local computer with users and passwords at this time. For more information, see "Using Wonderware Information Server without a Domain Controller" on page 119.

Check the Microsoft web site for updates and patches that you may
need to install.

Guidelines for Installing Microsoft Windows Server 2008

You can install Wonderware Information Server 4.5 on a server computer running a supported version of the Windows Server 2008 operating system. The supported versions are documented in the Readme file.This operating system does not incorporate IIS as part of the default installation, so you must select to install it. The following instructions are provided as a guide and do not constitute the entire Windows Server 2008 setup that your company guidelines may require, or that you may encounter while installing the operating system software. These instructions only document the specific options you need to configure during the installation.

Install the operating system on an NTFS partition. Install the defaults for Windows Server 2008 components. If you
have decided not to use a domain controller (not recommended), set up the local computer with users and passwords at this time. For more information, see "Using Wonderware Information Server without a Domain Controller" on page 119.

Check the Microsoft web site for updates and patches that you may
need to install.

ArchestrA System Platform Installation Guide

Guidelines for Installing Microsoft Operating Systems121

Guidelines for Installing Microsoft Windows 7

Wonderware Information Server 4.5 can be installed on a server computer running a supported version of the Windows 7 operating system. The supported versions are documented in the Readme file. This operating system does not include IIS as part of the default installation, so you must select to install it. There are some limitations for using Wonderware Information Server on Windows 7:

The Wonderware Information Server MultiViews feature is not

supported on Windows 7, because SharePoint is not supported on it.

Using Wonderware Information Server on Windows 7 is only

appropriate for smaller applications, because of the limits on the number of users. The following instructions are provided as a guide and do not constitute the entire Windows 7 setup that your company guidelines may require, or that you may encounter while installing the operating system software. These instructions only document specific options you need to configure during the installation.

Install the operating system on an NTFS partition. Install the Windows 7 components. If you have decided not to use a
domain controller (not recommended), set up the local computer with users and passwords at this time. For more information, see "Using Wonderware Information Server without a Domain Controller" on page 119.

Check the Microsoft web site for updates and patches that you may
need to install.

Guidelines for Installing Microsoft Windows Server 2008 R2

You can install Wonderware Information Server 4.5 on a server computer running a supported version of the Windows Server 2008 R2 operating system. The supported versions are documented in the Readme file. This operating system does not incorporate IIS as part of the default installation, so you must select to install it.

ArchestrA System Platform Installation Guide

122 Chapter 9 Information Server Requirements and Recommendations

The following instructions are provided as a guide and do not constitute the entire Windows Server 2008 R2 setup that your company guidelines may require, or that you may encounter while installing the operating system software. These instructions only document the specific options you need to configure during the installation.

Install the operating system on an NTFS partition. Install the defaults for Windows Server 2008 R2 components. If
you have decided not to use a domain controller (not recommended), set up the local computer with users and passwords at this time. For more information, see "Using Wonderware Information Server without a Domain Controller" on page 119.

Check the Microsoft web site for updates and patches that you may
need to install.

Guidelines for Installing Microsoft SQL Server

Wonderware Information Server uses Microsoft SQL Server to store vital configuration information, such as administrative passwords. Wonderware Information Server needs continuous access to the SQL Server to run properly. For the list of supported SQL Server versions, see the Readme file. You can use a SQL Server located anywhere on the same network. If you choose to use a SQL Server that is on a computer other than the one you will install the Wonderware Information Server on, you must:

Install the Microsoft SQL Server Client Tools on the Wonderware

Information Server computer and configure client-side TCP/IP connectivity to the remote SQL Server.

Exclude TCP Port 1433 and Port 80 from the Windows firewall on
the remote SQL Server computer. Wonderware Information Server can be used with a case-sensitive or case-insensitive SQL Server database. If you want to use the ArchestrA Reporting Services feature of Wonderware Information Server, you must install SQL Server Reporting Services on the Wonderware Information Server portal computer. It is best to select Reporting Services as part of the original SQL Server installation, rather than to try to add it later.

ArchestrA System Platform Installation Guide

Guidelines for Installing Microsoft SQL Server123

Guidelines for Installing Microsoft SQL Server 2008

These instructions are for installing a new SQL Server as a stand-alone installation. ArchestrA Reports are not supported on SQL Server 2008 Express Edition.
Important: During the Microsoft SQL Server installation, be sure that you select mixed mode as the authentication mode. To install SQL Server 2008 1 2 3 4 5

Insert the SQL Server installation CD into the DVD drive. The SQL Server Installation Center window appears. In the left pane, click Installation. In the right pane, click to start the new SQL Server stand-alone installation wizard. Click Next to progress through the installation windows. When the Feature Selection window appears, select the following features, at a minimum:

6 7

Database Engine Services Reporting Services Client tools

Click Next. The Instance Configuration window appears. Click Default instance.

ArchestrA System Platform Installation Guide

124 Chapter 9 Information Server Requirements and Recommendations

Click Next. Continue with the installation until the Server Configuration window appears.

For the service accounts, specify the network account unless otherwise required by your environment. If the SQL Server is installed on the same computer as the Wonderware Information Server, then you can use the localsystem account. However, you will need to be sure to specify a network account when you use the Wonderware Information Server Backup and Restore utility.

ArchestrA System Platform Installation Guide

Guidelines for Installing Microsoft SQL Server125

10 Continue with the default settings in the Collation tab. The default

collation settings are:

Database Engine: SQL_Latin1_General_CP1_CI_AS Analysis Services: Latin1_General_CI_AS

11 Click Next. The Database Engine Configuration window appears.

12 Configure the authentication details. Do the following: a b

Click Mixed Mode (SQL Server authentication and Windows authentication). Enter your system administration username and password.

13 Click Next. The Report Server Installation Options window

appears.

ArchestrA System Platform Installation Guide

126 Chapter 9 Information Server Requirements and Recommendations

14 Click Install the native mode default configuration. 15 Click Next to continue installing the SQL Server per your

requirements.

Guidelines for Installing IIS and ASP.NET

Wonderware Information Server requires Microsoft IIS and ASP.NET. If you did not include these options as part of the operating system installation, you will need to add them.

Guidelines for Installing IIS and ASP.NET on Windows Server 2003

The Windows Server 2003 operating system incorporates IIS as part of the default installation.
To install Internet Information Services and ASP.NET 1 2 3 4 5 6 7 8

On the Windows Start menu, point to Settings, and then click Control Panel. The Control Panel appears. Double-click Add or Remove Programs. The Add or Remove Programs window appears. Click Add/Remove Windows Components. The Windows Components Wizard appears. Select Application Server. Click Details. A list of subcomponents of the application server appears. Check ASP.NET and Internet Information Services (IIS). Highlight Internet Information Services (IIS) and click Details. Select the following subcomponents of Internet Information Services (IIS):

Common Files Internet Information Services Manager SMTP Service World Wide Web Service

Note: SMTP Service is a requirement for Sharepoint Services. 9

Click OK twice. The Windows Component Wizard appears.

10 Click Next to begin installing the selected components.

ArchestrA System Platform Installation Guide

Guidelines for Installing IIS and ASP.NET127

Guidelines for Installing IIS and ASP.NET on Windows 7

The Windows 7 includes IIS, but it is not included in the default installation.
To configure ASP.NET and IIS on Windows 7 1 2 3 4 5

On the Windows Start menu, click Control Panel. The Control Panel appears. Click Programs, and then double-click Programs and Features. Click Continue in the User Account Control dialog box. Click Turn Windows features on or off. In the Windows Features dialog box, expand Internet Information Services, expand Web Management Tools, expand IIS6 Management Compatibility, and then select the following check boxes:

IIS 6 WMI Compatibility IIS Metabase and IIS 6 configuration compatibility

Also select the following check boxes:

IIS Management Console IIS Management Scripts and Tools IIS Management Service

Expand World Wide Web Services, expand Application Development Features, and then select the following check boxes:

.NET Extensibility ASP ASP.NET ISAPI Extensions ISAPI Filters

Expand Common HTTP Features, and then select the following check boxes:

Default Document Directory Browsing HTTP Errors HTTP Redirection Static Content WebDAV Publishing

ArchestrA System Platform Installation Guide

128 Chapter 9 Information Server Requirements and Recommendations

Expand Health and Diagnostics, and then select the following check boxes:

HTTP Logging Request Monitor

Expand Performance Features, and then select the Static Content Compression check box.

10 Expand Security, and then select the following check boxes:

Request Filtering Windows Authentication

11 After you enable the required features, start the World Wide

Publishing service if you want to install the default configuration of Reporting Services. Otherwise, the SQL Server Setup program only installs Reporting Services and does not configure Reporting Services.

Guidelines for Installing IIS and ASP.NET on Windows Server 2008 and Windows Server 2008 R2
The procedure for installing IIS and ASP.NET on both Windows Server 2008 and Windows Server 2008 R2 is the same. IIS is not installed by default on these operating systems.
To configure ASP.NET and IIS on Windows Server 2008 and Windows Server 2008 R2 1

Open the Server Manager application. To open Server Manager:

a b

Open Control Panel, click System and Maintenance, and then click Administrative Tools. In the right pane, double-click Server Manager.

2 3 4 5

In the left pane of Server Manager, select the node that represents the server you are currently working on. In the right pane, expand Roles Summary and click Add Roles. The Add Roles Wizard appears. Click Next. The wizard moves to the Select Server Roles step. Select the Web Server (IIS) check box and click Next. The next wizard step that appears is information that guides you in the installation. Click Next. The wizard moves to the Role Services step. A list of available role services is displayed. If you click the name of a role, a short description of the role is displayed.

ArchestrA System Platform Installation Guide

Guidelines for Installing IIS and ASP.NET129

Select the Application Development role service, and then select the ASP.NET check box. A message is displayed prompting you to select the related options that are also required for Web application development. Click Add Required Role Services.

8 9

Click Next and verify the role service selection. Click Install to start the IIS and ASP.NET installation process.

10 After the installation is complete, click Close. 11 Install the Microsoft WebDAV extension.

There are two versions of WebDAV, one for 32-bit operating systems and one for 64-bit. You can download the extension from http://www.iis.net. You only need to install the extension files. The Wonderware Information Server Configurator utility will enable and set up authoring rules for the winroot folder during the core Information Server configuration.
Note: In Windows Server 2008 R2, WebDAV installation can be done during IIS configuration. To configure Windows authentication for IIS 1 2 3 4 5 6

In Server Manager, under the Roles node, select the Web Server (IIS) role. In the Role Services section, click Add Role Services. The Add Role Services wizard appears. Under the Security role service, select the Windows Authentication check box. Click Next and verify the role service changes to be applied. Click Install to start the IIS and ASP.NET installation process. Click Close to close the Add Role Services wizard.

To configure Windows Server 2008 to start an IIS Web site 1

In Server Manager, click the Web Server (IIS) node. If the node does not appear under the Roles node, refresh the view. In the System Service section, make sure that the World Wide Web Publishing Service is running. If the service is not running, start it. Under the Web Server (IIS) node, select Internet Information Services (IIS) Manager, expand the name of the Web server, and then expand Sites.

ArchestrA System Platform Installation Guide

130 Chapter 9 Information Server Requirements and Recommendations

4 5

Right-click Default Web Site and select Start. If you need a secure Internet connection, set up Secure Sockets Layer (SSL).

Guidelines for Installing Microsoft Reporting Services

You must have the SQL Server Reporting Services installed to use the ArchestrA Reporting Services features of Wonderware Information Server.

Guidelines for Configuring SQL Server 2008 Reporting Services

You can use the default settings for SQL Server 2008 Reporting Services. Check the settings and if they are already set by default, do not try to reset them as an error will occur. You must have IIS and ASP.NET installed before configuring SQL Server Reporting Services. For more information, see "Guidelines for Installing IIS and ASP.NET on Windows 7" on page 127.
To configure the SQL Server Reporting Services 1

On the Windows Start menu, point to Programs, Microsoft SQL Server 2008, Configuration Tools, and then click Report Server Configuration Manager. The Reporting Services Configuration Connection dialog box appears.

Configure the instance. Do the following:

a b

In the Server Name box, enter the name of the local report server node. In the Report Server Instance box, enter MSSQLSERVER.

ArchestrA System Platform Installation Guide

Guidelines for Installing Microsoft Reporting Services131

Click Connect. After the connection has been established, the Report Server Status page appears. The Server Status appears as Started.

Make sure that the following components are configured with no errors:

Service Account Web Service URL Database Report Manager URL

Click Exit.

ArchestrA System Platform Installation Guide

132 Chapter 9 Information Server Requirements and Recommendations

Guidelines for Installing and Uninstalling SharePoint Services

Microsoft Windows SharePoint Services 3.0 must be installed before you can install the MultiViews feature. SharePoint Services 3.0 is also known as SharePoint Services 2007. After installing SharePoint Services, verify that the SQL Server Reporting Services home page appears. Open your browser and enter one of the following:

http://localhost/reports http://yourservername/reports
If the home page does not appear, exclude Reports and ReportServer from the SharePoint virtual directory using the SharePoint Administration web site. Make sure that SharePoint allows applications to be created on the default site.
Important: If you uninstall SharePoint Services 3.0, the default website is deleted, which will make the Wonderware Information Server portal inaccessible. Back up the portal before uninstalling SharePoint Services 3.0.

Configuring Windows SharePoint Services 3.0

After you install Windows SharePoint Services 3.0, a default web site named Sharepoint - 80 is created in IIS so that Sharepoint Services gets the default port of 80. The Default Web Site that is using port 80 is stopped.

You must delete the "Sharepoint - 80" web site that is using the default port.

ArchestrA System Platform Installation Guide

Guidelines for Installing and Uninstalling SharePoint Services133

To delete the default web site 1

On the Windows Start menu, point to Programs, point to Administrative Tools, and then click SharePoint 3.0 Central Administration. The web site appears. Click Application Management tab. Under SharePoint Web Application Management, click Delete Web Application. The Delete Web Application page appears. Do the following:
a b

2 3 4

In the Web Application list, click Change Web Application. The Select Web Application page appears. Select the Windows SharePoint Services 3.0 default Web site "SharePoint - 80" (http://ServerName).

Note: Make sure that you delete the default web site: http://ServerName:80 c d e 5

Under Delete content databases, click Yes. Under Delete IIS Web sites, click Yes. Click Delete. When a warning message box appears, click OK.

Wait for the Application Management tab to appear, and then close the Windows SharePoint Services Central Administration site. Open Internet Information Services (IIS) Manager and check that the "Sharepoint - 80" default website created by Sharepoint has been deleted.

Right-click Default Web Site and then click Start to start the services.

To run Sharepoint Services 3.0, you must create a new website.

ArchestrA System Platform Installation Guide

134 Chapter 9 Information Server Requirements and Recommendations

To create a new web site and site collection 1

On the Windows Start menu, point to All Programs, point to Administrative Tools, and then click SharePoint 3.0 Central Administration. Click the Application Management tab. Under SharePoint Web Application Management, click Create or extend web application. The Create or Extend Web Application dialog box appears. Create a new web application. Do the following:
a b c

2 3

Click Create a new Web application. The Create New Web Application dialog box appears. In the IIS Web Site section, click Use an Existing IIS Web site and make sure that Default web site is selected in the list. In the Application Pool section, click Predefined and make sure that Network Service is selected as the security account for the application pool. In the Database Name and Authentication section, make sure that Windows authentication is selected. Click OK and wait while your changes are processed. The Application Management page appears.

d e 5 6

In the Application Management page, click on Create Site Collection. The Create Site Collection page appears. Do the following:
a

In the Web Application section, click Change Web Application in the Web Application list. The Select Web Application page appears. Select the new web application that you created in step 4. In the Title and Description section, type the title and description. In the Template section, click Blank Site. In the Primary Site Collection Administrator section, specify the user name of the person administering this site (for example, svadmin1). Click OK and wait while your changes are processed. The Top Level Site Successfully Created page appears, Click OK button.

b c d e

f g 7

Make sure that you can access the web site.

ArchestrA System Platform Installation Guide

Installing SQLXML for HTTP Access to Wonderware Historian Data135

Installing SQLXML for HTTP Access to Wonderware Historian Data

ActiveFactory Reporting can use HTTP to access data in a Wonderware Historian that uses SQL Server 2005.
Note: Using SQLXML 3.0 to connect to SQL Server 2008 is not supported.

When you use the installation Configurator utility to set up an initial data source, you select to use HTTP access and then provide a name for the virtual directory. The Configurator utility takes care of setting up the virtual directory for you and configuring the HTTP access. Install the SQLXML software on the computer that:

Has IIS installed. Is accessible over the network using HTTP from the Wonderware
Historian server computer.

Is accessible over the network using HTTP from Wonderware

Information Server client computers.
To install SQLXML software 1 2

Locate the \SQLXML folder on the Wonderware Information Server installation CD. Run the SQLXML.msi file.

Note: You may encounter an error while installing SQLXML on the 64-bit version of the Windows 7 operating system. As a workaround, you can install SQLXML by executing the SQLXML.msi file from the command prompt. To do this successfully, the command prompt must be run using the Run as Administrator option.

Installing Language Packs for Multilingual Systems

If you want to use Wonderware Information Server on a multilingual system, you must manually install the Microsoft .NET language packs for any language that is in addition to the default language of the system. Wonderware Information Server supports French, German, Chinese, and Japanese. You can download the language packs from the Microsoft website.

ArchestrA System Platform Installation Guide

136 Chapter 9 Information Server Requirements and Recommendations

ArchestrA System Platform Installation Guide

137

Chapter 10 Information Server Installation and Configuration

Wonderware Information Server consists of a set of services, a COM+ package of components, and a customizable web server of ASP and HTML pages. You do not need to be familiar with web building software to set up Wonderware Information Server. The Wonderware Information Server installation program and Configurator utility builds and configures the entire web server for you. You use the ArchestrA System Platform installation program to copy the required resources, such as files, from the setup DVD to the target computer. You then use the Configurator utility to finish the setup. For information on installing or upgrading the Win-XML Exporter, see the Wonderware Information Server Win-XML Exporter Guide. For information on installing the ArchestrA Web Exporter, see the ArchestrA Web Exporter Guide.

ArchestrA System Platform Installation Guide

138 Chapter 10 Information Server Installation and Configuration

Installable Features
You can select from the following features during the Wonderware Information Server install:

Information Server. Consists of core Wonderware Information

Server system, which manages security, licensing, data sources, process graphics, factory alarms, customizing the portal, access panels, and Table Weaver contents.

MultiViews. Supports SharePoint Web Part Pages that can

combine several distinct types of information together in the same web page, which is arranged in a specific layout.

ActiveFactory Reporting. Allows you to generate reports from

published ActiveFactory workbooks and trends using data from the Wonderware Historian.

ArchestrA Reporting. Provides infrastructure and tools that

extend SQL Server Reporting Services to better support report development and deployment.

Sample Content. Includes sample configurations and reports to

show the systems capabilities and accelerate application development. The sample content includes a process graphics demo, a SmartSymbol display, content unit samples, and ArchestrA report samples. You must configure valid alarm and Wonderware Historian data sources to use the sample content.

ArchestrA License Server. Provides support for licensing

infrastructure on the Wonderware Information Server computer. An alternative is not to install this feature and use the License Server from a network location. You use the ArchestrA License Manager to set up a license server for Wonderware Information Server. For more information, see the ArchestrA License Manager documentation.

ArchestrA System Platform Installation Guide

Installation Pre-Requisites139

Installation Pre-Requisites
The installation program checks for the following basic system pre-requisites:

One of the required operating systems. For more information, see

the Readme file.

A supported version of the Microsoft .NET Framework. If this is

not found, the installation program installs it.

A file system partitioned with NTFS. You are a member of the local computers administrator group. IIS is installed. For more information, including which roles and
features are required for each supported operating system, see "Guidelines for Installing IIS and ASP.NET" on page 126.

The required version of MSI is available. If this is not found, the

installation program automatically installs it. All other product pre-requisites are part of configuration and are not checked during the Wonderware Information Server install. For example, the installation does not check for:

Windows SharePoint Services, if you select the MultiViews feature

during installation.

Microsoft Excel, if you select the ActiveFactory Reporting Website

feature during installation.

SQL Server Reporting Services, if you select the ArchestrA

Reporting feature during installation.

ArchestrA System Platform Installation Guide

140 Chapter 10 Information Server Installation and Configuration

About the Wonderware Information Server Installation

You must be a member of the local computers administrator group to install Wonderware Information Server. The person who logs onto the computer as administrator and installs Wonderware Information Server is designated as the first administrator for the Wonderware Information Server. This person is the only one who has access to the administrative pages inside Wonderware Information Server and is responsible for adding additional users to roles, assigning access privileges, customizing the product, configuring data sources, and deploying the licenses. As an administrator, you must know the names and passwords for the Wonderware Historian and InTouch Alarm System databases from which Wonderware Information Server retrieves data. You must install an ArchestrA Bootstrap on the Wonderware Information Server portal computer to support any process graphic that uses an ArchestrA reference to get data. You may be required to restart the Wonderware Information Server computer after the installation program copies the files and before the Configurator runs.
WARNING! If you currently have ActiveFactory 9.0/9.1 Reporting Web Services on your system, do not uninstall it. The Wonderware Information Server installation program uses this for migrating ActiveFactory 9.0/9.1 reports to the ActiveFactory Reporting Web Services in Wonderware Information Server. If you uninstall ActiveFactory 9.0/9.1 Reporting Web Services before installing Wonderware Information Server, it will not migrate and you lose all your ActiveFactory 9.0/9.1 reports.

Install the Wonderware Information Server using the ArchestrA System Platform installation program. For detailed instructions, see "Installing the ArchestrA System Platform" on page 13. The installation path must be a valid path to which the currently logged in user has write permissions.

ArchestrA System Platform Installation Guide

About Wonderware Information Server Configuration141

When the installation is complete, continue with the configuration steps required for Wonderware Information Server. For more information, see "About Wonderware Information Server Configuration" on page 141.
Important: If you exit the installation program without clicking Configure, required files, such as the ActiveFactory language packs, are not installed. To install ActiveFactory language packs, run the Wonderware Information Server installation program, select to modify the install, and then remove the ActiveFactory Reporting Website feature. Then run the installation program again and add the ActiveFactory Reporting Website feature. The language packs will be installed.

About Wonderware Information Server Configuration

You use the Configurator to set up the product, such as creating the databases and configuring the pre-requisite software. The Configurator provides detailed feedback on the status of the configuration process. If you make changes to your operating environment, you can use the Configurator to re-configure Wonderware Information Server. However, always use the Wonderware Information Server portal to make changes to portal configuration. For example, if you want to change the settings for a Historian data source, use the Data Source Manager within the portal, not the Configurator utility.

Windows Firewall Exceptions

You can leave the Windows firewall on during configuration. The Configurator makes the appropriate firewall exceptions for TCP Port 1433 and Port 80. However, you may need to manually adjust the Windows firewall settings for the following scenarios:

If you are using a remote SQL Server, you must enable File and
Printer Sharing in the Windows firewall configuration to permit

the Wonderware Information Server Backup and Restore utility to work.

If you are using a remote SQL Server, Port 1433 and port 80 must
be open in the Windows firewall on the remote node to access the Reporting Service web pages.

If the TCP Port on the local computer is configured to use a port

other than Port 1433, you must manually add this other port to the Windows firewall exceptions list.

ArchestrA System Platform Installation Guide

142 Chapter 10 Information Server Installation and Configuration

Using Windows Authentication with Microsoft SQL Server 2008

If you are using Microsoft SQL Server 2008 and want to use Windows authentication, you must add the BUILTIN\Administrators security group to the sysadmin server role before you use the Configurator utility.
To add the security group 1

Execute the SYS.SP_GrantLogin stored procedure as follows:

EXEC SYS.SP_GrantLogin 'BUILTIN\Administrators'

Open the "BUILTIN\Administrators" login properties and add it to the sysadmin security role.

Configuring the Wonderware Information Server

Before you start the configuration, be sure that:

You know the administrative login credentials for the Microsoft

SQL Server you are using.

During the Wonderware Information Server configuration, no one

accesses the web server, or any of its services, using a browser. The Configurator needs to be able to shut down services appropriately. The SQL Server services must be configured to execute using a network account.

Starting the Configurator Utility

You can start the Configurator utility at the end of the installation program. If Wonderware Information Server is already installed, you can start the utility from the Windows Start menu.
To start the Configurator utility 1

On the Start menu on the Windows Taskbar, point to Programs, Wonderware, then to Common, and then select Configurator. The Configurator main window appears.

ArchestrA System Platform Installation Guide

Configuring the Wonderware Information Server143

In the left pane, expand Wonderware Information Server. A list of Wonderware Information Server features appears. The icon to the left of the feature name shows the configuration status of the feature.

When you click a feature name, configuration options appear in the right pane. Status and error messages appear in the window in the bottom right of the dialog box. For more information about a message, including possible actions you need to take, double-click the message text in the window.

ArchestrA System Platform Installation Guide

144 Chapter 10 Information Server Installation and Configuration

Click on each installed feature and configure the options.

For more information on configuring Information Server, see

"Configuring the Core Wonderware Information Server" on page 144.

For more information on configuring ActiveFactory Reporting,

see "Configuring ActiveFactory Reporting" on page 146.

For more information on configuring ArchestrA Reporting, see

"Configuring ArchestrA Reporting" on page 149.

For more information on configuring MultiViews, see

"Configuring MultiViews" on page 152.

For more information on configuring sample content, see

"Configuring Sample Content" on page 153.
4

When you are done, click Close.

Configuring the Core Wonderware Information Server

The Configurator checks for the following pre-requisites before configuring the core Wonderware Information Server:

A supported operating system is installed. IIS is installed. A supported version of ASP.NET is enabled. SQL Server Client Components are installed on the local
computer.

A supported version of SQL Server is installed.

The Configurator:

Creates the required virtual directories, configures web server

extensions, disables the static file cache, and creates the appropriate application pools for the IIS.

Creates the SuiteVoyager database in SQL Server. The

SuiteVoyager database is the administration and configuration database for Wonderware Information Server.

Creates login IDs used exclusively by the Wonderware Information

Server software to access the SuiteVoyager database: svAdmin, svSysAdmin, svSuper and svUser.

Sets up Windows registry entries. Creates the required exceptions in the Windows firewall on the
local computer.

Creates and configures COM+ files and packages.

ArchestrA System Platform Installation Guide

Configuring the Wonderware Information Server145

Configures the Wonderware Information Server Alarm Consumer,

Wonderware License Manager and RDBHandler services.

Excludes the appropriate virtual directories for SharePoint.

To configure the core Wonderware Information Server 1 2

Open the Configurator utility. In the left pane, click Information Server. The configuration options appear in the right pane.

In the Virtual Folder Name box, type the virtual folder name. The virtual folder name is the address you enter in Internet Explorer to access Wonderware Information Server. The virtual folder name is not case-sensitive, can be any characters other than /,*,?, and \. The maximum length is 240 characters. For example, if you specified MyInfoServer, run-time users would type http:\\<computername>\MyInfoServer to access Wonderware Information Server.

ArchestrA System Platform Installation Guide

146 Chapter 10 Information Server Installation and Configuration

In the Database Configuration area, specify the SQL Server host on which you want to create the Wonderware Information Server database that is used to store administration and configuration information. Do the following:
a b

In the Server box, type the name of the SQL Server host. Select the authentication mode you want to use. Click Windows to log on to SQL Server using your current Windows login account, or click SQL and type your SQL Server username and password. The account you specify must be an administrative SQL Server account.

Note: This account information is only used by the installation to create the administration database. It is not stored on the computer in any way or used by the Wonderware Information Server at any later time. 5

In the Application Account area, type the user account information used by portal components to log on and run as Windows services. The account you specify must have sufficient rights on the domain to retrieve a list of domain users. Otherwise, domain users do not appear in the User Manager page of Wonderware Information Server. In the License Status area, verify the licensing status. If no valid license is found, click License Manager to install the license. For more information, see "Installing the Product License" on page 157. Click Configure. A green check appears in the left pane when Wonderware Information Server is successfully configured.

Configuring ActiveFactory Reporting

The Configurator checks for the following pre-requisite before configuring ActiveFactory Reporting:

Microsoft Excel 2007 or later

The Configurator:

Creates and configures the ActiveFactory Reporting WebSite

virtual directory.

Excludes the virtual directory from SharePoint. Configures the Wonderware Historian database to support
ActiveFactory Reporting.

Generates and configures various ActiveFactory Reporting support

files (.xml, .xsl, and so on).

Configures the Windows service for reporting.

ArchestrA System Platform Installation Guide

Configuring the Wonderware Information Server147

Be sure that Microsoft Excel is not running while you configure ActiveFactory Reporting.
To configure ActiveFactory Reporting 1 2

Open the Configurator utility. In the left pane, click ActiveFactory Reporting. The configuration options appear in the right pane.

The pre-requisites are checked.

3 4

In the Virtual Folder Name box, type the report web site name. In the Historian Data Source area, specify the name of the Wonderware Historian to use as the source of report data. You can either select an existing data source from the list or click Define New Historian Data Source to define a new one. For more information, see "Defining a New Historian Data Source" on page 148. ActiveFactory Reporting does not support a data source that uses Windows authentication.

In the Historian Configuration area, provide an administrative SQL Server account that the Configurator will use to log on to the Wonderware Historian and configure the database to support ActiveFactory Reporting. Click Configure. A green check appears in the left pane when ActiveFactory Reporting is successfully configured.

ArchestrA System Platform Installation Guide

148 Chapter 10 Information Server Installation and Configuration

Defining a New Historian Data Source

You can define a new Historian data source using the Configurator. If you want to configure a data source to use Windows authentication, you must set up delegation between the middle server and the back end Historian server. This is done on the domain controller. For more information, see the Microsoft Web site. http://msdn2.microsoft.com/en-us/library/ms189580.aspx.
To define a new Historian data source 1

In the configuration pane, click Define New Historian Data Source. The New Historian DataSource Form page appears.

Specify the Historian data source. Do the following:

a

In the Data Source Name box, type name of the Wonderware Historian as you would like it to appear for Wonderware Information Server users. In the Database Server Name box, type the name of the Wonderware Historian. In the Database Name box, type Runtime.

b c

ArchestrA System Platform Installation Guide

Configuring the Wonderware Information Server149

Configure the account used to connect to the Historian. Do any of the following:

To use Windows authentication, select the Integrated Security

check box.

To use SQL Server authentication, provide the user name and

password in the Historian User Name and Historian User Password boxes.
4

Configure the data source timeouts. Do the following:

a

In the Connection Timout box, type the time, in seconds, that Wonderware Information Server should wait for the connection to the Historian to be established, before returning an error message. In the Query Timeout box, type the time, in seconds, that the Wonderware Information Server should wait for the results of a database query to the Historian to be returned, before returning an error message.

In the Provider box, type the provider name for SQL Server. For SQL Server 2005, type SQLNCLI. For SQL Server 2008, type SQLNCLI10. If you want to access the Historian using HTTP instead of TCP/IP, do the following:
a b

Select the Has HTTP mode check box. In the URL Connection box, enter the web service URL.

Click OK.

Configuring ArchestrA Reporting

The Configurator checks for the following pre-requisite before configuring ArchestrA Reporting:

SQL Server Reporting Services is configured and working on the

local computer The Configurator:

Creates and configures the ArchestrAReports virtual directory and

sets up folder security for the IIS.

Creates and configures the aaReports database in SQL Server. Creates Windows security groups. Also creates the aaReportsUser
login ID.

Creates any necessary Windows registry keys. Configures the aaReports data source for Wonderware Information
Server.

ArchestrA System Platform Installation Guide

150 Chapter 10 Information Server Installation and Configuration

Creates the ArchestrA Reports folder under the root of the SQL
Server Reporting Services web site.

Deploys sample history and alarm reports.

To configure ArchestrA Reporting 1 2

Open the Configurator utility. In the left pane, click ArchestrA Reporting. The configuration options appear in the right pane.

The pre-requisites are checked.

3

Select the Deploy Sample Reports to use the sample reports with a historian or alarm data source. If you do not select his check box, you can use ArchestrA Reporting for products that do not use a historian or alarm data source, such as the InBatch software. In the Historian Data Source for Sample Reports area, specify the name of the data source for the report data. You can either select an existing data source from the list or click Define New Historian Data Source to define a new one. For more information, see "Defining a New Historian Data Source" on page 148. In the Alarm Data Source for Sample Reports area, specify the name of the InTouch alarm database to use as the source of alarm data. You can either select an existing data source from the list or click Define New Alarm Data Source to define a new one. For more information, see "Defining a New Alarm Data Source" on page 150. Click Configure. A green check appears in the left pane when ArchestrA Reporting is successfully configured.

Defining a New Alarm Data Source

You can define a new alarm data source using the Configurator. If you want to configure a data source to use Windows authentication, you must set up delegation between the middle server and the back end alarm server. This is done on the domain controller. For more information, see the Microsoft Web site. http://msdn2.microsoft.com/en-us/library/ms189580.aspx.
ArchestrA System Platform Installation Guide

Configuring the Wonderware Information Server151

To define a new alarm data source 1

In the configuration pane, click Define New Alarm Data Source. The New Alarm DataSource Form page appears.

Specify the alarm data source. Do the following:

a b

In the Data Source Type list, click Alarm. In the Data Source Name list, type name of the alarm data source as you would like it to appear for Wonderware Information Server users. In the Description box, type a description for the data source that is shown to Wonderware Information Server users. In the ServerName box, type the name of the computer that hosts the alarm database. In the Database box, type WWALMDB.

c d e 3

Configure the account used to connect to the alarm database. Do any of the following:

To use Windows authentication, select the Integrated Security

check box.

To use SQL Server authentication, provide the user name and

password in the User Name and Password boxes.
4

Select the Default for this Data Source type check box to make this defined data source the default alarm data source used by ArchestrA Reports.

ArchestrA System Platform Installation Guide

152 Chapter 10 Information Server Installation and Configuration

Configure the data source timeouts. Do the following:

a

In the Connection Timout box, type the time, in seconds, that Wonderware Information Server should wait for the connection to the alarm database to be established, before returning an error message. In the Query Timeout box, type the time, in seconds, that the Wonderware Information Server should wait for the results of an alarm query to be returned, before returning an error message.

In the Provider box, type the provider name for SQL Server. For SQL Server 2005, type SQLNCLI. For SQL Server 2008, type SQLNCLI10. Click OK.

Configuring MultiViews
The Configurator checks for the following pre-requisite before configuring MultiViews:

A supported version of SharePoint is installed

The Configurator:

Includes MultiViews navigation in the hierarchy. Deploys Web Parts. Creates sites and document libraries.
Note: The Multiviews feature is not supported on the 64-bit versions of Windows Server 2008. To configure MultiViews 1 2

Open the Configurator utility. In the left pane, click MultiViews. The configuration option appears in the right pane.

The pre-requisites are checked.

3 4

In the Select SharePoint Application list, click the name of the SharePoint application to use for MultiViews. Click Configure. A green check appears in the left pane when MultiViews is successfully configured.

ArchestrA System Platform Installation Guide

Installing the ArchestrA Web Exporter153

Configuring Sample Content

For the Process Graphics sample to update the live data, you must run InTouch WindowViewer on the Wonderware Information Server computer. For the Trend Content Units to work, ActiveFactory Reporting feature must be installed and configured. The Configurator:

Creates the FactorySuiteSample database in SQL Server. Creates and configures Wonderware Information Server data
sources for the samples.

Creates and configures the sample, such as the InTouch

applications, TableWeaver content units, Symbol Weaver content, and so on.
To configure sample content 1 2 3

Open the Configurator utility. In the left pane, click Sample Content. There are no configuration options. Click Configure. A green check appears in the left pane when the sample content is successfully configured.

Installing the ArchestrA Web Exporter

You must install the ArchestrA Integrated Development Environment (IDE) before installing the ArchestrA Web Exporter. After the installation, you can start the ArchestrA Web Exporter from the ArchestrA IDE toolbar, from the Object menu, or from the context menu of an InTouchViewApp object. For more information on how to install the ArchestrA Web Exporter, see the Wonderware ArchestrA Web Exporter Guide. There are certain requirements that must be met so that a published display can read and write data back to its data source. For more details, see the Wonderware ArchestrA Web Exporter Guide. For more information, see the Creating and Managing ArchestrA Graphics Users Guide or the InTouch HMI Visualization Guide.

ArchestrA System Platform Installation Guide

154 Chapter 10 Information Server Installation and Configuration

Installing the Win-XML Exporter

For information on installing the Win-XML Exporter, see the Wonderware Information Server Win-XML Exporter Guide.

Modifying Wonderware Information Server

When you modify the Wonderware Information Server installation, you add new features or remove existing features. If you add a feature, the condition of all pre-requisite software is checked. If the checks pass, all the resources associated with that feature are copied to the Wonderware Information Server computer. You then use the Configurator to configure the feature. If you remove a feature, all the configuration for that feature is returned to the original state. Use the ArchestrA System Platform installation program to modify the installation. For more information, see "Modifying an Installation" on page 25.

Repairing Wonderware Information Server

If you repair the Wonderware Information Server, any files that were part of the original installation are replaced if they are corrupt. The configuration for any of the features is not changed. To change the configuration, you need to use the Configurator utility. Use the ArchestrA System Platform installation program to repair the installation. For more information, see "Repairing an Installation" on page 28.

ArchestrA System Platform Installation Guide

Uninstalling Wonderware Information Server155

Uninstalling Wonderware Information Server

If you uninstall Wonderware Information Server, the entire product is removed, including feature-related files and folders, COM+ packages, ASP files, and so on. However, the uninstall does not remove any user-created content, such as the user database, process graphics, content units, report files, and so on. Use the ArchestrA System Platform installation program to uninstall the Wonderware Information Server. For more information, see "Uninstalling an ArchestrA System Platform Component" on page 30. Uninstalling Wonderware Information Server does not require you to restart the computer after the uninstall is complete. After you uninstall Wonderware Information Server, use the Windows Add/Remove Programs feature to uninstall each language pack. Language packs are named Wonderware ActiveFactory <lang> Language, where <lang> is French, German, Japanese, or Simplified Chinese. You should not uninstall language packs if either Wonderware Information Server or ActiveFactory are still installed on the computer.

Upgrading from a Previous Version

You can upgrade the following versions to Wonderware Information Server 4.5:

Wonderware Information Server 3.1 Wonderware Information Server 4.0 Wonderware Information Server 4.0 with SP1
For versions older than these, you must uninstall the existing version and install Wonderware Information Server 4.5. The upgrade program automatically backs up the product files, configuration, and user content before the upgrade occurs. After the upgrade is completed, each feature has to be configured using the Configurator tool. Features that are not configured will not be available until the configuration is completed.

ArchestrA System Platform Installation Guide

156 Chapter 10 Information Server Installation and Configuration

The following table provides a summary of the upgrade support:

Base release Upgrade Support

ActiveFactory Reporting Website 8.5 or earlier only ActiveFactory Reporting Website 9.0 or 9.1

Not supported. You must uninstall this version manually and then install Wonderware Information Server 4.5. Not supported. You must uninstall this version manually and then install Wonderware Information Server 4.5. Not supported. You must uninstall this version manually and then install Wonderware Information Server 4.5. Direct upgrade. Direct upgrade. Direct upgrade.

Wonderware Information Server 3.0

Wonderware Information Server 3.1 (all combinations of features) Wonderware Information Server 4.0 (all combinations of features) Wonderware Information Server 4.0 with SP1 (all combinations of features)

When you upgrade from Wonderware Information Server 3.1, 4.0 or 4.0 with SP1 to Wonderware Information Server 4.5, the feature selection functionality will be unavailable. You can upgrade only the features that are already installed. If you want to install additional features, you must run the setup program again, after the upgrade, and select to modify the installation. Existing ArchestrA Reports and sample content are migrated to Wonderware Information Server 4.5. For detailed information on upgrading ActiveFactory components, see "Upgrading ActiveFactory Components" on page 157. For information on installing or upgrading the Win-XML Exporter, see the Wonderware Information Server Win-XML Exporter Guide. For information on installing the ArchestrA Web Exporter, see the ArchestrA Web Exporter Guide.

ArchestrA System Platform Installation Guide

Installing the Product License157

Upgrading ActiveFactory Components

The ActiveFactory Reporting WebSite 8.5 Migration Utility is not supported by Wonderware Information Server 4.5. You cannot upgrade directly from the ActiveFactory 8.5 Reporting WebSite to Wonderware Information Server 4.5. If you are using the ActiveFactory 8.5 Reporting WebSite with SuiteVoyager 2.6, you must manually uninstall it before you install Wonderware Information Server 4.5. If you want to migrate the ActiveFactory 8.5 reports, you must first upgrade to the ActiveFactory 9.0/9.1 Reporting WebSite and then upgrade from ActiveFactory 9.0/9.1 Reporting WebSite to Wonderware Information Server 3.1 or 4.0. After that you can upgrade to Wonderware Information Server 4.5.

Upgrading the Server from Wonderware Information Server 3.1, 4.0 or 4.0 with SP1
If the ActiveFactory desktop applications are installed on the Wonderware Information Server computer, you must manually uninstall them before upgrading Wonderware Information Server. You may be required to restart the Wonderware Information Server computer after the installation program updates the files and before the Configurator runs. For instructions on upgrading Wonderware Information Server, see "Upgrading an ArchestrA System Platform Component" on page 32.

Installing the Product License

Wonderware Information Server requires you to set up a license server using the ArchestrA License Manager. The license server can be set up on the same computer as the Wonderware Information Server software or on a different computer. For information on licensing and how to install licenses, including how to read license files and set up license servers, see the ArchestrA License Manager Guide and the online help. For additional information about specific licensing issues for Wonderware Information Server, see the Wonderware Information Server Administration Guide.
To start the ArchestrA License Manager

On the Start menu on the Windows Taskbar, point to Programs, Wonderware, then to Common, and then select ArchestrA License Manager. The ArchestrA License Manager main window appears.

ArchestrA System Platform Installation Guide

158 Chapter 10 Information Server Installation and Configuration

ArchestrA System Platform Installation Guide

159

Index

A
acquisition loading 62 ActiveEvent installing 89 ActiveFactory upgrading 157 ActiveFactory reporting web services 140 ActiveFactory reporting, configuring 146 ActiveX and .NET Controls aaHistClientQuery 107 aaHistClientTrend 107 alarm data source defining 150 analog tags disk space requirements 59 antivirus software 97 Application Server ArchestrA user account requirements 35 hardware requirements 41 upgrading previous version 39 ArchestrA Bootstrap 118

ArchestrA Change Network Account utility 24, 36 ArchestrA License Manager 138, 157 ArchestrA reporting, configuring 149 ArchestrA System Platform installing 13 upgrade 32 ArchestrA user account requirements for use with Application Server 35 updating with ArchestrA Change Network Account utility 36 ASP.NET installing 126, 127

B
Bootstrap upgrading 40 upgrading with Galaxy Repository 40 upgrading with IDE 40 upgrading with IDE and Galaxy Repository 41 building block controls aaHistClientTagPicker 107 aaHistClientTimeRangePicker 107

Application Server Users Guide

160Index

C
client connections 66, 67 common components 38, 90 Configuration Utility 91 Configurator starting 142 configuring ActiveFactory reporting 146 ArchestrA reporting 149 MultiViews 152 sample content 153 Wonderware Information Server 141, 142, 144 Configuring Products 23 connections 66 CSV data licensing 71

G
Galaxy database migrating 44 Galaxy Repository upgrading 42 upgrading with the Bootstrap 40 upgrading with the Bootstrap and IDE 41

H
hardware recommendations storage 57 hardware requirements 41 disk space 57, 58 IDASs 55 System Management Console 54 Wonderware Historian 51 Historian Client 72 historian data source defining 148 Historian Database Export/Import Utility requirements 54 history blocks disk space requirements 59 licensing 71 history data licensing 71 migrating from older versions 103 Holding database disk space 58 HTTP 111 HTTP access 135

D
database configuring 91 database files disk space requirements 58 DDE Windows Server 2003 52, 64, 72 demo mode 48 discrete tags disk space requirements 59 disk sizing 56 disk space history blocks 59 planning 57 domain controller 118, 119 security 118 using with Wonderware Information Server 118, 119

I
IDASs installing 89 licensing 70 performance 63 requirements 55 security 55 IDE upgrading 43 upgrading with the Bootstrap 40 upgrading with the Bootstrap and Galaxy Repository 41 IIS 111, 112, 121, 127 installing 126, 127 InBatch 72 installation

E
event data migrating from older versions 103

F
FAT 57 fault-tolerant servers 54 feature lines 68 features 138 firewall exceptions 141

Application Server Users Guide

Index161

about 87 components 87 Microsoft SQL Server 88 modifying 25 repairing 28 Wonderware Historian 87 installation pre-requisites 139 installing ArchestrA System Platform 9 IIS and ASP.NET 126, 127 Microsoft SQLXML 112 product license 157 SharePoint Services 132 SQL Server 122, 123 Windows Server 2003 119 Windows Server 2008 120, 121 Wonderware Historian Client 109 Wonderware Information Server 137, 140 Internet Information Services 120, 121 InTouch 115, 119, 140 InTouch History Importer 55 InTouch windows running within browser 115 InTouch WindowViewer 72

Microsoft Client Utilities 88 Microsoft .NET Framework 108 Microsoft SQL Server installation 88 Microsoft Windows Server 2003 119 Microsoft Windows Server 2008 120 Microsoft Windows Server 2008 R2 121 modify installation 25 modifying Wonderware Information Server 154 multilingual systems 135 MultiViews about 116 configuring 152

N
named pipes 88 navigation tree 116 network cards 65 network protocol 67 networking 64 NTFS 57, 59, 119, 120, 121, 122

L
LAN 65 language packs 135, 155 legacy software 38 License Viewer 90 licensing 47 about 68 feature lines data modification 71 history duration 71 operating system 69 processor 71 remote IDAS 70 tag count 69 loading Wonderware Historian 62

O
operating system requirements 117 operating system, upgrading 41 operating systems licensing 69 non-English 72

P
performance 61 examples 73 IDASs 63 storage 64 physical memory 52 process graphics 115 process network 65 processors licensing 71 product license 157 installing 157 products configuring 23 protocols 67 recommendations 64

M
Management Console 89 Manufacturing Execution Module 72 memory requirements 52, 61

Application Server Users Guide

162Index

R
RAID 57 repair installation 28 repairing 113 Wonderware Historian 98 repairing Wonderware Information Server 154 Requirements hardware 107 other 108 software 107 requirements 107 Historian Database Export/Import Utility 54 retrieval loading 62 roaming profiles 110 Runtime database disk space 58 migration 100

loading 62 performance 64 string tags disk space requirements 59, 60 SuiteLink 64 summary data migrating from older versions 103 system sizing 73 System Management Console installing 89 requirements 54

T
tags licensing 69 TCP/IP 64, 88 tiered historian sizing 79

U
uninstall ArchestrA System Platform Component 30 uninstalling 113 uninstalling Wonderware Information Server 155 upgrade basic steps 41 Galaxy Repository 42 Galaxy Repository node 42 IDE 43 operating system 41 redundant pairs 45 run-time nodes 44 SQL Server 41 upgrading 99, 100 ActiveFactory components 157 previous version 155 Wonderware Information Server 3.1 157 Wonderware Information Server 4.0 157 Wonderware Information Server 4.0 with SP1 157

S
sample content, configuring 153 SCSI 57 security domain controller 118 remote IDASs 55 SharePoint Services 132 installing 132 software requirements 41 software requirements 117 IDASs 55 System Management Console 54 Wonderware Historian 51 SPCPro 72 SQL Server 108, 112 installing 122, 123 upgrading 41 SQL Server Reporting Services 116, 130 SQL statements licensing 71 SQLXML 111, 135 storage disk sizing 56 hardware recommendations 57

V
variable length strings 60 virtual memory 52 VMWare 52

Application Server Users Guide

Index163

W
WAN 65 web server requirements 116 Windows 7 121 Installing 121 windows authentication 142 Windows Server 2003 52, 64, 72, 119, 120, 121, 126 installing 119 Windows Server 2003 R2 119 Windows Server 2008 52, 120, 128 installing 120, 121 Windows Server 2008 R2 121, 122 Windows Vista 52 Windows XP Professional 52 Wonderware Application Server 119 Wonderware Historian components 89 installation 90

installing 87 loading 62 memory requirements 61 repairing 98 requirements 51 upgrading 99 Wonderware Historian Client Components 106 Query 106 Report 106 Trend 106 Workbook 106 Wonderware Historian Server 111 Wonderware Information Server 72 configuring 141, 142 installing 137, 140 modifying 154 repairing 154 uninstalling 155 using with a domain controller 118 using without a domain controller 119

Application Server Users Guide

164Index

Application Server Users Guide