Scribd
Upload
313 views

Subsea BOP Stack Operations API - Deviated Well Kill Sheet

This document contains formation strength test data, drilling parameters, well geometry information, pump specifications, and pressure calculations for killing a well with a subsea blowout preventer. It includes the current mud weight, maximum allowable mud weight, shoe depth, proposed kill mud weight, initial and final circulating pressures, pressure losses from the blowout preventer to the end of the hole and kickoff point. Pressure calculations also factor in drill pipe and drill collar volumes, pump rates, and friction losses through the riser and choke line.

Uploaded by

Mannattil Krishna Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
313 views

Subsea BOP Stack Operations API - Deviated Well Kill Sheet

This document contains formation strength test data, drilling parameters, well geometry information, pump specifications, and pressure calculations for killing a well with a subsea blowout preventer. It includes the current mud weight, maximum allowable mud weight, shoe depth, proposed kill mud weight, initial and final circulating pressures, pressure losses from the blowout preventer to the end of the hole and kickoff point. Pressure calculations also factor in drill pipe and drill collar volumes, pump rates, and friction losses through the riser and choke line.

Uploaded by

Mannattil Krishna Kumar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

psi

psi
ppg
ppg
FORMATION STRENGTH DATA:
SURFACE LEAK -OFF PRESSURE FROM
FORMATION STRENGTH TEST (A)
(C)
(B) MUD WEIGHT AT TEST
MAXIMUM ALLOWABLE MUD WEIGHT =
(B) +
(A)
SHOE T.V. DEPTH x 0.052
=
INITIAL MAASP =
((C) - CURRENT MUD WEIGHT) x SHOE T.V. DEPTH x 0.052
=
PUMP NO. 1 DISPL. PUMP NO. 2 DISPL.
bbls / stroke bbls / stroke
CURRENT DRILLING MUD:
ppg WEIGHT
DEVIATION DATA:
ft KOP M.D.
ft KOP T.V.D.
ft EOB M.D.
ft EOB T.V.D.
CASING SHOE DATA:
in SIZE
ft M. DEPTH
ft T.V. DEPTH
HOLE DATA:
in SIZE
ft M. DEPTH
ft T.V. DEPTH
SPM
SPM
SLOW PUMP
RATE DATA:
(PL) DYNAMIC PRESSURE LOSS [psi]
PUMP NO. 1 PUMP NO. 2
PRE-RECORDED
VOLUME DATA:
LENGTH
ft
CAPACITY
bbl s/ ft
VOLUME
bbls
PUMP STROKES
Strokes
TIME
minutes
DP - SURFACE TO KOP
DP - KOP TO EOB
DP - EOB TO BHA
HEVI WALL DRILL PIPE
DRILL COLLAR
DRILL STRING VOLUME
x
x
x
x
x
=
=
=
=
=
+
+
+
+
bbls
(D)
DC x OPEN HOLE
DP / HWDP x OPEN HOLE
OPEN HOLE VOLUME
x
x
=
= +
bbls
(F)
TOTAL ANNULUS / CHOKELINE VOLUME
TOTAL WELL SYSTEM VOLUME
x =
bbl s
bbls
(G)
(F+G+H) = (I)
(D+I) = (J)
stks
stks
(L)
(M)
stks (N2)
stks min
stks min
stks min
stks min
stks min
ACTIVE SURFACE VOLUME
TOTAL ACTIVE FLUID SYSTEM
bbl s
bbls
(K)
(J+K)
stks (N3)
stks (N1)
SUBSEA BOP DATA:
ft
MARINE RISER
LENGTH
ft
CHOKELINE
LENGTH
Riser Choke
Line
Riser Choke
Line
Friction
Line
Choke
DP x CASING
x = (H) stks min CHOKELINE
+
+
stks
stks
x = stks MARINE RISER x DP bbls
Subsea BOP Deviated Well Kill Sheet (API Field Units)
Dr No SSD 04/01
(Field Units)
27-01-2000
International Well Control Forum DATE :
NAME :
Friction
Line
Choke
CIRCULATING PRESS.
AT EOB (EOB CP) ............... psi
(R) + (S) = ............. + ............. =
(T) = ICP - KOP CP = .............. - .............. = ............. psi
(T) x 100
(L)
=
X 100
= .............
(U) = KOP CP - EOB CP = .......... - .......... = ............. psi
(U) x 100
(M)
=
(W) = EOB CP - FCP = ............. - ............. = ............. psi
(W) x 100
(N1+N2+N3)
=
psi
100 strokes
= .............
psi
100 strokes
= .............
psi
100 strokes
X 100
X 100
............... psi
REMAINING SIDPP
AT EOB (S)
SIDPP - (KMW - CMW) x EOBTVD x 0.052
= ............ - (...............-................) x 0.052 x ................ =
psi psi SICP PIT GAIN bbl SIDPP
KICK DATA :
KILL MUD WEIGHT
KMW
CURRENT MUD WEIGHT +
SIDPP
TVD x 0.052
................ ppg
............... psi
............... psi
............... psi
................. +
X 0.052
=
INITIAL CIRC. PRESSURE
ICP
DYNAMIC PRESSURE LOSS + SIDPP
................. + ................. =
FINAL CIRCULATING
PRESSURE
FCP
x DYNAMIC PRESSURE LOSS
KILL MUD WEIGHT
CURRENT MUD WEIGHT
x ................. =
DYNAMIC PRESSURE
LOSS AT KOP (O)
PL + (FCP-PL) x
KOPMD
TDMD
= .......... + (...........-............) x =
............... psi
REMAINING SIDPP
AT KOP (P)
SIDPP - (KMW - CMW) x KOPTVD x 0.052
= ............ - (...............-................) x 0.052 x ................ =
CIRCULATING PRESS.
AT KOP (KOP CP) ............... psi
(O) + (P) = ............. + ............. =
DYNAMIC PRESS. LOSS
AT EOB (R)
INITIAL DYNAMIC
CASING PRESS AT
KILL PUMP RATE
............... psi
= ................ - ................ =
............... psi
PL + (FCP-PL) x
EOBMD
TDMD
= .......... + (...........-............) x =
SICP - CHOKE LINE FRICTION
Dr No SSD 04/02 (Field Units) 27-01-2000
DATE :
NAME :
International Well Control Forum
Subsea BOP Kill Sheet - Deviated Well (API Field Units)
S
T
R
O
K
E
S
P
R
E
S
S
U
R
E
S
T
A
T
I
C
&
D
Y
N
A
M
I
C
D
R
I
L
L
P
I
P
E
P
R
E
S
S
U
R
E
[
p
s
i
]
STROKES
[
p
s
i
]
Dr No SSD 04/03 (Field Units) 27-01-2000
DATE :
NAME :
International Well Control Forum
Subsea BOP Kill Sheet - Deviated Well (API Field Units)

You might also like