Scribd
Upload
1K views

API 650-RF Pad Calculation

The document provides specifications for two nozzles, N27A/B/C/D and N25 A/B. It includes parameters like nozzle size, thickness, material, and stress allowances. Calculations are shown for items like net thickness required, length of nozzle neck, and area of reinforcement required at the opening. The total area of reinforcement required is calculated as 4953.874 mm2 and reinforcement is determined to be adequate.

Uploaded by

Sudhanshu67
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

API 650-RF Pad Calculation

The document provides specifications for two nozzles, N27A/B/C/D and N25 A/B. It includes parameters like nozzle size, thickness, material, and stress allowances. Calculations are shown for items like net thickness required, length of nozzle neck, and area of reinforcement required at the opening. The total area of reinforcement required is calculated as 4953.874 mm2 and reinforcement is determined to be adequate.

Uploaded by

Sudhanshu67
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

InputData 1 NozzleMark 2 NozzleSize 3 NozzleOutsidediameter 4 Schedule 5 Thicknessasperschedule 6 7 8 9 10 Finisheddiameterofcircularopening CorrosionAllowance Nozzlewallthickness NozzleMOC Allowablestressinnozzle

Parameter

Units mm mm SCH mm mm mm mm MOC kPa mm mm mm mm MOC kPa kPa NOUNIT NOUNIT MOC mm mm

N27A/B/C/D 100 114.3 120 11.13 92.04 3.2 7.93 ASTMA106Gr.B 117900 51600 25 21.8 4.583 A36 159958 6 0.7 07 1 A36 10 350

N25A/B 100 114.3 120 11.13 92.04 3.2 7.93 ASTMA106Gr.B 117900 51600 25 21.8 4.583 A36 159958 6 0.7 07 1 A36 10 350

Dn Dno
SCH

tn dn
c

tnc
MOC

11 ShellDiameter 12 Shell/Roofthicknessincludingcorrosionallowance 13 Shell/Roofthicknessincorrodedcondition ThkofwallplaterequiredbyCI5.10.3fortheLatitudinalunitforcesT2(Fromdesign 14 Calculation) 15 Shell/RoofMOC 16 AllowableStressinShell(Table52b) 17 Totalinternalpressure@centreofopening 18 MaximumJointEfficiency(Table52) 19 WhenopeningisinsolidplateorinCatBbuttjoint 20 RFPadMOC 21 RFPadthickness 22 RFPaddiameter CalculationsasperAPI620CI5.16.5 Netthicknessrequiredforaseamlesstankwallatthecentreofopening(exclusiveof ) 1 corrosionallowance) tr=tc Netthicknessrequiredfornozzleneck(exclusiveofcorrosionallowance) 2 trn=Px(Dt+c)/2xSxE 3 Lengthofnozzleneckwithinthelimitsofreinforcement Ln=smaller2.5(twC)or2.5(tnC)+tw Areaofreinforcementrequiredattheverticalcentrelineofthroughopening Ar=(dn+2C)(tC)E' Areaofreinforcementduetoexcessthicknessinthetankwall AI=(dn+2C)(twCtr) Areaofreinforcementduetoexcessthicknessinthenozzleneck A2=2Ln(tnCtrn) Areaofreinforcementduetoexcessthicknessinthereinforcementpad A4=tpad(DpadDno)

Sn Dt tw twc t=(T2/(StsE)+c
MOC S P=P1+Pq E E' MOC

tpad Dpad

tr trn Ln1 Ln2 Ln Ar A1 A2 A4 A=A1+A2+A4 Yes/No

mm mm mm mm mm mm2 mm
2

1.383 1.383 54.5 44.825 44.825 136.094 2009.898 586.975 2357 4953.874 YES

1.383 1.383 54.5 44.825 44.825 136.094 2009.898 586.975 2357 4953.874 YES

4 5 6 7

mm2 mm2 mm2

8 Totalareaofreinforcementprovided 9 Isreinforcementprovidedisadequateornot

You might also like