Scribd
Upload
3K views2 pages

2.3.1.2 Packet Tracer - Skills Integration Challenge Instructions

The document provides requirements for configuring a new switch with initial settings like hostname, banner, passwords, SSH, and port security to restrict network access and allow only two hosts per port.

Uploaded by

jbleriagu
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views2 pages

2.3.1.2 Packet Tracer - Skills Integration Challenge Instructions

The document provides requirements for configuring a new switch with initial settings like hostname, banner, passwords, SSH, and port security to restrict network access and allow only two hosts per port.

Uploaded by

jbleriagu
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Packet Tracer - Skills Integration Challenge

Topology

Addressing Table
Device S1 PC1 PC2 Interface VLAN 1 NIC NIC IP Address 10.10.10.2 10.10.10.10 10.10.10.11 Subnet Mask 255.255.255.0 255.255.255.0 255.255.255.0

Scenario
The network administrator asked you to configure a new switch. In this activity, you will use a list of requirements to configure the new switch with initial settings, SSH, and port security.

Requirements
Configure S1 with the following initial settings: Hostname Banner that includes the word warning Console port login and password cisco Encrypted enable password of class Encrypt plain text passwords Management interface addressing Domain name of cisco.com RSA key-pair parameters to support SSH version 2 Set SSH version 2 User admin with secret password ccna VTY lines only accept SSH connections and use local login for authentication Disable all unused ports.

Configure SSH to secure remote access with the following settings:

Configure the port security feature to restrict network access:

2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 1 of 2

Packet Tracer - Skills Integration Challenge Set the interface mode to access. Enable port security to allow only two hosts per port. Record the MAC address in the running configuration. Ensure that port violations disable ports.

2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 2 of 2

You might also like