Scribd
Upload
232 views

Company Name Weld Procedure Specification

WPS Template

Uploaded by

AekJay
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
232 views

Company Name Weld Procedure Specification

WPS Template

Uploaded by

AekJay
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

WELDING PROCEDURE SPECIFICATION (WPS)

COMPANY NAME Weld Procedure Specification


PROJECT: PROJECT SPECIFICATION: WELDING CODE: JOINT TYPE: EDGE PREPARATION: INTER PASS CLEANING: BACKING: BACKING MATERIAL TYPE: POWER SOURCE: WELDING: MACHINE/GUN: WELD JOINT PREPARATION DETAILS WELDING SEQUENCE/POSITION MATERIAL TYPE: GROUP: PROJECT No: CONTRACT No: CONSTRUCTION CODE:

RECORD (PQR) WELDER QUALIFICATION (WQR)

QUALIFICATION NOTES:

N/A
WELDING PROCESS: TYPE (AUTO,MANUAL,SEMI-AUTO): WELDING PROGRESSION:

SEMI-AUTO

N/A N/A

WELDING POSITION: MODE OF TRANSFER: JOINT DESIGN ROOT OPENING: ROOT FACE: GROOVE ANGLE: MATERIAL SPECIFICATION

N/A N/A N/A

Austenitic Cr-Ni 8 mm DIAMETER (OD): N/A RANGE QUAL: 6 mm to 12 mm GRADE: 304L


THICKNESS: PREHEAT C: MAX INTERPASS C: P.W.H.T.: WELD JOINT TOLERANCES If the separation is 1.5mm or greater the fillet size shall be increased by that amount. WELD PASS DETAILS NO. SIDE POS. DIR ELECTRODE DESCRIPTION TYPE SIZE SPEC. F No. WELD SEQUENCE NOTES HEAT RATE: HOLD TEMP: UNCONTROLLED: PREHEAT FLUX OR INTERPASS GAS TEMP. C HEAT INPUT KJ/mm

P No.:

THERMAL TREATMENT

No N/A N/A N/A


TIME LAPSE MAX

CONTROLLED C: HOLD (MIN/HR): COOL RATE:

N/A N/A N/A

WELDING PARAMETERS/CURRENT AMPS VOLTS POL SPEED

NOTES:

PREPARED BY: TITLE: TESTING REQUIRED REPORT No:

TEST PLATE IDENTIFICATION MARKED: WELDER: WELDER ID: COUPON DIMENSIONS: COUPON UNIQUE ID: LOCATION: DATE WELDED: SUPERVISED BY:

CONSUMABLES/DETAILS CONTACT TUBE TO WORK DISTANCE: SHIELDING GAS: STRING OR WEAVE BEAD: BACK PURGE RATE: ELECTRODE TYPE: ELECTRODE SIZE:

N/A N/A

CONSUMABLE TREATMENT: CONSUMABLE STORAGE: FLOW RATE: FLUX: NOTES/STAMP

COMPNAY APPROVAL APPROVED BY: DATE:

CLIENT APPROVAL APPROVED BY: DATE:

MGL-F-253 Rev 2 Draft

Page 1 of 2

COMPANY NAME
CONTINUED WELDING PROCEDURE SPECIFICATION
WELD PASS DETAILS NO. SIDE POS. DIR ELECTRODE DESCRIPTION TYPE SIZE SPEC. F No. PREHEAT FLUX OR INTERPASS GAS TEMP. C HEAT INPUT KJ/mm TIME LAPSE MAX WELDING PARAMETERS/CURRENT AMPS VOLTS POL SPEED

MGL-F-253 Rev 2 Draft

Page 2 of 2

You might also like