DIFFERENTIAL PRESSURE GAUGE

TM

SINGLE DIAPHRAGM TYPE BA

SPECIAL FEATURES
l & ATEX APPROVED ELECTRICAL CONTACTS
GOST - R
l CASE & MEASURING SYSTEM IN SS
l DRY OR LIQUID FILLED
l STANDARD FOLLOWED IN GENERAL EN 837 - 3
APPLICATIONS
CHEMICALS / REFINERY / NUCLEAR / AEROSPACE
/ FERTILIZER / PETROCHEMICALS / PHARMACEUTICAL
/ POWER / CEMENT / SUGAR / FOOD & BEVERAGES / PULP
PAPER & ALLIED PROCESS INDUSTRIES.
SPECIFICATIONS

STANDARD VERSION : 100 mm & 150 mm

Accuracy : ±2.5% of F. S.
Ambient temperature : - 25°C to + 65°C
Process temperature : Max. 100°C
2
Static Pressure : 10 kg/cm up to ranges 600 mmWC
: 40 kg/cm2 for ranges 1000 mmWC to 2500 mmWC
: 60 kg/cm2 for ranges 4000 mmWC & above

F Static Pressure up to 100 kg/cm 2

on request.
Case & Bezel : AISI 304 SS (Bayonet Type)
Diaphragm : AISI 316L SS
Nuts & Bolts : AISI 304 SS
Process Connection : 1/4” NPT (F) x 2 Nos.
Seal Chamber : AISI 304 SS
Movement : AISI 304 SS
Protection : IP 65
Dial : Aluminum, black graduation on white background
Pointer : Aluminum, black coloured, Micrometer Zero Adjustable
Window : Shatter proof / Safety Glass
Case Gasket : Neoprene
o o
Scale Amplitude : 180 to 270 (Depends on Range)
GLYCERINE FILLED VERSION (OPTION PY)
Accuracy : ±4% of F. S.
Ambient Temperature : Maximum 65°C
Process Temperature : Maximum 65°C
Window : Plexi Glass
Dampening Liquids : Glycerin 99.7%
Other Features : Refer Specification of Standard Version

ELECTRICAL CONTACTS - DRY VERSION

Accuracy :±3% of F. S.
Ambient Temperature : Maximum 65°C
Process Temperature : Maximum 65o C
Window : Polycarbonate Dome
Dampening Liquids : Dielectric Oil (Optional)
:
Electrical Contacts* Refer How to Order
:
Other Features : Refer Specification of Standard Version
* Please specify contact set points while ordering.

Temperature effect:
The variation of indication caused by effects of temperature is to be calculated by below formula;
which is to be added in the specified accuracy while measurement :-
Formula : ± 0.08 x (t2 - t1) % of F. S.
where t1 = reference temperature (+20°C) and t2 = ambient temperature in °C.

Note : The addition of mechanical electric contacts affects the accuracy of instruments such that 1% becomes 1.5%, 1.6% becomes 2.4% etc. (Add the 50% of accuracy;
If the contact is of the magnetically assisted type, this value can’t be added within the ±5% of setting point.)
www.waaree.com
75 PG - BA - 01 - 2009 / 10
We Sense l We Measure l We Control
 TM

BA
DIMENSIONS - STANDARD VERSION
TYPE 2
TYPE 6
F B B O
A A
H

H ØD J ØD
ØC ØC

Q G Q G
K F
LOW PRESSURE CHAMBER
LOW PRESSURE CHAMBER
NS A Weight in gram
B ØC ØD F H G Q
(With Box) Weight in gram
NS A B ØC ØD F H G Q J K O (With Box)
100 12.5 48 100 111 150 150 24 54 8100.0
100 12.5 48 100 111 150 150 24 54 161 39 101 9000.0
150 15 49 149 161 150 150 24 54 8260.0
150 15 49 149 161 150 150 24 54 161 39 101 9250.0

F B
A TYPE 1 M

H P ØD L
ØC

LOW PRESSURE CHAMBER

Weight in gram
NS A B ØC ØD F H G Q P M L (With Box)
Q G
100 12.5 48 100 111 150 150 24 54 90 15 150 8410.0
150 15 49 149 161 150 150 24 54 90 15 150 8560.0

F B
A TYPE 1 M

H P ØD L
ØC

Q HIGH PRESSURE CHAMBER

Weight in gram
G NS A B ØC ØD F H G Q P M L (With Box)
100 12.5 48 100 111 105 100 25 54 90 15 150 4610.0
150 15 49 149 161 105 100 25 54 90 15 150 4760.0

www.waaree.com
76 PG - BA - 01 - 2009 / 10
We Sense l We Measure l We Control
 TM

BA
TYPE 2 TYPE 6

HIGH PRESSURE CHAMBER

Weight in gram
NS A B ØC ØD F H G Q J K O (With Box)
HIGH PRESSURE CHAMBER 100 12.5 48 100 111 105 100 25 54 161 39 101 5000.0
Weight in gram 150 15 49 149 161 105 100 25 54 161 39 101 5250.0
NS A B ØC ØD F H G Q
(With Box)
100 12.5 48 100 111 105 100 25 54 4250.0
150 15 49 149 161 105 100 25 54 4400.0

TYPE 12

HIGH PRESSURE CHAMBER

Weight in gram
NS A B ØC ØD S ØI ØN ØU F H G Q
(With Box)
100 12.5 48 100 111 1 6 134 118 105 100 25 54 4250.0
150 15 49 149 161 1 6 186 168 105 100 25 54 4400.0

Notes : • Drawings are not to scale. • All Dimensions are in mm. • NS = Nominal Size.

RANGE TABLE
Note : Waaree offers National / International Scales like kPa, MPa, bar, psi, kg/cm2, mbar, mWC, inWC & Dual Scale
like kPa with psi, kPa with bar, bar with psi or Equivalent scales as per the requirement can be provided on request.
Following are the example tables for kg/cm2 & mmWC

PRESSURE RANGE (Single Scale)

Low Pressure High Pressure
DAMPENING LIQUIDS: CODE
mmWC mmWC mmWC kg/cm² kg/cm² kg/cm²
0/250 0/1000 0/4000 0/1 0/2.5 0/10
0/400 0/1600 0/6000 0/1.6 0/4 0/16
0/600 0/2500 0/2 0/6 0/25
Note : Other Scale are available on customer request.

ACCESSORIES (Refer Datasheet for complete specifications)

* MANIFOLDS

* Refer catalogue for Valves & Manifolds

www.waaree.com
77 PG - BA - 01 - 2009 / 10
We Sense l We Measure l We Control
 TM

BA
WIRING DIAGRAMS FOR ELECTRIC CONTACTS

SINGLE CONTACT

1 NO 1 NC

Opening Closing

DOUBLE CONTACT

1 NO + 1 NC 1 NC + 1 NC

Closing 1
Opening 1
Closing 2
Closing 2

1 NC + 1 NO 1 NO + 1 NO

Closing 2 Opening 1

Opening 1 Opening 2

INDEPENDENT DOUBLE CONTACT

1 NO+ 1 NC 1 NC + 1 NC

Opening 1
Closing 1
Closing 2
Closing 2

www.waaree.com
78 PG - BA - 01 - 2009 / 10
We Sense l We Measure l We Control
 TM

BA
HOW TO ORDER
[It is recommended to use manifolds along with Differential Pressure Gauges for better performance and safety.]
Example
BASIC MODEL
CODE BA
F H

NOMINAL SIZE 100 mm 150 mm X

TYPE OF MOUNTING
1 WALL / SURFACE / PROJECTION MOUNTING WITH BOTTOM ENTRY
X
2 DIRECT BOTTOM ENTRY OR
6 2" PIPE / YOKE MOUNTING BOTTOM ENTRY (Mounting bracket will be provided of steel epoxy painted.) XX
12 CENTER BACK ENTRY WITH FRONT FLANGE (Suitable for High Pressure Chamber Only)

GAUGE CONNECTION (Though adaptors)

4BM 1/4” NPT (M) x ½" BSP (M) X 2 Nos. 4NM 1/4” NPT (M) x ½” NPT (M) X 2 Nos. 2NF 1/4” NPT (F) (Standard)* XXX
* These female connections are directly provided on chamber.
Note : Connections like Metric/ PT/ PF/ Flaired/ UNF/ G/ R etc can be provided on request.

DIAPHRAGM
UJ AISI 316L SS (Standard) UM MONEL XX
SEAL CHAMBER
CY AISI 304 SS (Standard) RB AISI 316 SS RD MONEL XX
RANGE
REFER RANGE TABLE
0-2
kg/cm2
OPTIONS
PS AISI 316 SS CASE & BEZEL RZ TOUGHENED GLASS
PW FIVE POINT CALIBRATION CERTIFICATE RH CUSTOM DESIGNED DIAL
XX
PY DAMPENING LIQUID GLYCERINE FILLED RW PLEXI GLASS
QA DAMPENING LIQUID SILICON OIL** SW DIAL TAG MARKING
GH MATERIAL TEST CERTIFICATES# SX SS TAG PLATE
SJ MAXIMUM READING POINTER WITH PLEXI GLASS (FOR DRY VERSION)* TF TESTED TO NACE STANDARDS
JU 2” PIPE/YOKE MOUNTING BRACKET & ‘U’ CLAMP (AISI 304 SS) ZZ DIELECTRIC OIL FILLED**
FN 2” PIPE/YOKE MOUNTING BRACKET & ‘U’ CLAMP (AISI 316 SS)

* For ranges 2.5 kg/cm² and above. ** Gasket & Plug of NBR. Refer Price List for Viton.
# MATERIAL TEST CERTIFICATES WILL BE PROVIDED FOR WETTED PARTS ONLY WITH CHEMICAL COMPOSITION TESTING. FOR OTHERS, PLEASE CONSULT FACTORY.

ELECTRIC CONTACTS ( & ATEX APPROVED)

(FOR DRY VERSION, WITH INGRESS PROTECTION UP TO IP 55 & POLY CARBONATE DOME AS A WINDOW)
A) SINGLE INSULATED MAGNETIC SNAP ACTION TYPE* B) INDUCTIVE TYPE (220 V AC, 0.4 Amp.)
(230 V AC, 1 Amp.)(48 V DC, 0.5 Amp.)
(AVAILABLE FOR 1000 mmWC & ABOVE )
(AVAILABLE FOR 1 kg/cm² & ABOVE) XX
RJ Single; NORMALLY CLOSED (1 NC) YW Single; NORMALLY OPEN (1 NO)
RK Double; NORMALLY CLOSED + NORMALLY OPEN (1 NC +1 NO) YV Single; NORMALLY CLOSED (1 NC)
DAMPENING LIQUIDS: CODE
Single; NORMALLY OPEN (1 NO)
RL YX Double; NORMALLY CLOSED + NORMALLY OPEN (1 NC +1 NO)
RM DAMPENING
Double; NORMALLY OPEN LIQUIDS:
+ NORMALLY CLOSEDCODE
(1 NO + 1 NC) YY Double; NORMALLY OPEN (BOTH NO)
RN DAMPENING
Double; NORMALLY CLOSED LIQUIDS: CODE
(BOTH NC) YZ Double; NORMALLY CLOSED (BOTH NC)
RO Double; NORMALLYDAMPENING LIQUIDS: CODE
OPEN (BOTH NO) ZA Double; NORMALLY OPEN + NORMALLY CLOSED (1 NO + 1 NC)
RU BOOSTER WITH RELAY FOR CURRENT UPTO 5 Amp.
RA SPDT
RC DPDT

* FOR DOUBLE INSULATED ELECTRICAL CONTACTS, CONSULT FACTORY FOR PRICE & DELIVERY.
2
Ordering Example: BA - X - X OR XX - XXX - 0/2 kg/cm - XX - XX
FOR OTHER OPTIONAL ITEMS, PLEASE CONTACT FACTORY FOR DELIVERY AND MINIMUM QUANTITY OF ORDER.
Y FOR DIAPHRAGM SEALS, VALVES & MANIFOLDS, REFER INDIVIDUAL DATA SHEETS.
(THE CAPILLARY LENGTH SHALL BE MAXIMUM UP TO 3 METERS & RANGE SHALL BE ABOVE 1 kg/cm².)

Note : Specifications and dimensions given in this product catalogue represents the state of engineering at the time of printing.
Modifications may take place and materials specified may be replaced by others without prior notice.

www.waaree.com
79 PG - BA - 01 - 2009 / 10
We Sense l We Measure l We Control