Scribd
Upload
1K views2 pages

16as2630to en

This document provides information about the ZF-AS Tronic automatic transmission system for heavy trucks. It describes three transmission types - the basic 16 AS 2630 TO transmission, the 16 AS 2631 TO transmission with an Intarder, and the 16 AS 2635 TO transmission with a clutch-dependent power take-off. It lists the key specifications of the 16 AS 2630 TO transmission such as its input torque capacity, weight, oil capacity, oil grade, and standard gear ratios. It also provides diagrams of the transmission and its installation dimensions.

Uploaded by

Gianna Frola
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

16as2630to en

This document provides information about the ZF-AS Tronic automatic transmission system for heavy trucks. It describes three transmission types - the basic 16 AS 2630 TO transmission, the 16 AS 2631 TO transmission with an Intarder, and the 16 AS 2635 TO transmission with a clutch-dependent power take-off. It lists the key specifications of the 16 AS 2630 TO transmission such as its input torque capacity, weight, oil capacity, oil grade, and standard gear ratios. It also provides diagrams of the transmission and its installation dimensions.

Uploaded by

Gianna Frola
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

16 AS 2630 TO

ZF-AS Tronic (Truck)

Automatic transmission system for heavy trucks

16 AS 2630 TO - Basic transmission 16 AS 2631 TO - Transmission with Intarder 16 AS 2635 TO - Transmission with clutch-dependent PTO

Transmission type Input torque Weight * without auxiliaries Oil capacity for initial filling Oil grade Clutch bell housing SAE 1 Additional weight for ZF-Intarder Additional oil quantity for ZF-Intarder
*without oil fill, clutch and clutch release components

16 AS 2630 TO max. 2600 Nm 252 kg 13 dm 3 as specified in ZF List of Lubricants TE-ML 02 integrated 70 kg 10 dm 3

Standard ratios in gear 1 2 3 4 7.89 5 6.52 6 5.39 7 4.57 8 3.78 9 3.09 10 2.56 11 2.09 12 1.73 13 1.43 14 1.18 15 1.00 16 R1 R2

14.12 11.68 9.54

0.83 13.07 10.81

Subject to technical change without notice.

ZF Friedrichshafen AG Lkw-Antriebstechnik 88038 Friedrichshafen/Germany Tel. +49 7541 77- 0 Fax +49 7541 77- 908000 www.zf.com/truck-transmission

EN

2008-09

see also Data Sheet for Intarder: IT_AS_Tronic_Truck_EN

16 AS 2630 TO
Installation dimensions 953 1 2 3 4 6.1

278

301

SAE 1

13
1 2 3 4 5

12 11

10
7 8 9

9
Oil fill and oil level check Oil drain Clutch module

6.2

Electrical connection Breather Gearshift module Compressed air connection Output

10 Input 11 Connection point for clutch-dependent PTO 12 Compressed air connection 13 Oil drain

6.1 Speedo sensor, transmission side 6.2 Speedo sensor, vehicle side

278

SAE 1

304

300

278

721.5
4 5

1 2 3

Option to fit steering pump drive Connection for PTO ZF-AS Tronic transmission

ZF-Intarder unit Oil / water heat exchanger

304

480

Pictures: 031396; 018930; 018936 Subject to technical change without notice. ZF Friedrichshafen AG Lkw-Antriebstechnik 88038 Friedrichshafen/Germany Tel. +49 7541 77- 0 Fax +49 7541 77- 908000 www.zf.com/truck-transmission

EN

2008-09

You might also like