Scribd
Upload
314 views

Reverberation Time Calculation Sheet

This document provides a template for calculating the reverberation time of a room. It includes sections to input the room dimensions and type, calculate the volume and surface areas, assign absorption coefficients to different materials, calculate the current and required absorption to achieve a desired reverberation time, and estimate additional absorption panels needed. The goal is to determine modifications needed to achieve optimal reverberation for the room's intended use.

Uploaded by

dcove
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
314 views

Reverberation Time Calculation Sheet

This document provides a template for calculating the reverberation time of a room. It includes sections to input the room dimensions and type, calculate the volume and surface areas, assign absorption coefficients to different materials, calculate the current and required absorption to achieve a desired reverberation time, and estimate additional absorption panels needed. The goal is to determine modifications needed to achieve optimal reverberation for the room's intended use.

Uploaded by

dcove
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Reverberation Time Calculation

Project: Date

Type of Room (Gym, Pool, Auditorium, Etc.): _______________________________ Room Dimensions Length Width Height Room Volume (V = L x W x H) Area Calculations length by width Ceiling Floor Walls Other surfaces Absorption Coefficients Painted Wood VCT Brick & Block Glass Wood Steel (Metal Roof Deck) Absorption Coefficient 0.02 0.02 0.02

0 ft. 0 ft. 0 ft. 0 cubic feet Area in sq.ft. 0 0 0 0

0.02 0.02 0.02 0.04 0.06 0.01 Area Quantity 0 0 0 0

Concrete Conc Blk Painted Concrete Blk Water Surface of a Pool Carpet Gypsum Board Total Absorption 0 0 0 0 A=

0.02 0.36 0.07 0.01 0.30 0.06

Area Material Ceiling Floor Walls Other surfaces

x x x x

Current Absorption Estimated Existing Reverberation Time T=(.05 x V)/A Desired Reverberation Time (DT) Absorption Required, AR=(.05 x V)/DT Estimated Additional Units Needed Estimated sq ft of Tectum panels needed for desired absorption Tectum NRC= 0.85 Length 0 Width 0

0 Sabins #DIV/0! Seconds 1.5 Seconds 0 Sabins 0 Sabins

0 Sq.Ft.

(Panel size in feet)

Panel Size =

#DIV/0!

Panels

Phone: 888-977-9691

Fax: 800-832-8869

www.tectum.com

You might also like