METAL FILM RESISTORS
Series :
Features:
Meet performance requirements of JSS Std. & MIL Std. Flameproof Coating available on request. Miniature Size available for Space savings. TCR Available 10,25,50,100,200 ppm/ C. Available ranges from 1 Ohm ~ 10 MOhms. RoHS Compliant directive 2002/95/EC Lead (Pb)-free solder contacts. Low cost & miniature size
MF & MFS
Construction :
MFR PROTECTIVE LACQUER
COLOUR CODE RINGS
HIGH ALUMINIUM GRADE CERAMIC ROD
LEAD
STEEL TERMINATION CAPS
METAL FILM RESISTIVE LAYER
UNDERCOAT LAYER
Technical specification:
DESCRIPTION
MF125
GENERAL SERIES
MF25 MF50 MF100 MF200
MINIATURE SERIES
MFS40 MFS60 MFS100 MFS200 MFS300
Resistance range Resistance tolerance Temperature coefficient * Maximum dissipation @ 70C Maximum permissible voltage Climatic category Stability, Load Climatic test Soldering Short time overload R max.
0.125W 0.25W 0.5W
1% ;1 ~ 10M 1%, E24/E96 series; 2% & 5%, E24 series 10 ppm/C ~ 200 ppm/C
1W 2W 0.4W 0.6W 1W 2W 3W
200 V
250V
350V
500V
500V
250
300
350
500
500
55/155/56
R(2% +0.05 ) R(1% +0.05 ) R(0.5% +0.05 ) R(0.5% +0.05)
* NOTE:- Low TCR available on request.
MFR reserves the right to make changes in product specification without notice or liability. All information is subject to MFR's own data & is considered accutate at the time of going to print.
Document no. : Revision no. :
MF02 120102
Page : 1 of 4
Dimensions :
Physical Data:
1.0 GENERAL SERIES SPECIFICATION :
TYPE WATT. @ 70C TOL. TCR PPM/C L DIMENSIONS (mm) D d 0.05 H RESISTANCE RANGE MAX. WORKING VOLTAGE MAX. OVERLOAD VOLTAGE
MF125
0.125W
1%, 2% & 5% 1%, 2% & 5% 1%, 2% & 5% 1%, 2% & 5% 1%, 2% & 5%
10 ~ 200 10 ~ 200 10 ~ 200 10 ~ 200 10 ~ 200
3.3 0.2 1.7 0.2
0.45
28 min
10 ~ 1M
200V
400 V
MF25
0.25W
6.5 0.5 2.3 0.2
0.6
25 min
1 ~ 10M
250V
500 V
MF50
0.5W
9.5 1
3.5 0.5
0.6
25 min
1 ~ 10M
350V
700 V
MF100
1W
12 1
4.5 0.5
0.8
24 min
1 ~ 10M
500V
1000 V
MF200
2W
16 1
5.5 0.5
0.8
25 min
1 ~ 10M
500V
1000 V
Note : Working voltage is P X R where P is power & R is resistance in Ohms
2.0 MINITURE SERIES SPECIFICATION:
TYPE WATT. @ 70C TOL. TCR PPM/C L DIMENSIONS (mm) D d 0.05 H RESISTANCE RANGE MAX. WORKING VOLTAGE MAX. OVERLOAD VOLTAGE
MFS40
0.4W
1%, 2% & 5% 1%, 2% & 5% 1%, 2% & 5% 1%, 2% & 5% 1%, 2% & 5%
10 ~ 200 10 ~ 200 10 ~ 200 10 ~ 200 10 ~ 200
3.3 0.2 1.7 0.2
0.45
28 min
10 ~ 1M
250V
500 V
MFS60
0.6W
6.5 0.5 2.3 0.2
0.6
25 min
1 ~ 10M
300V
700 V
MFS100
1W
9.5 1
3.5 0.5
0.6
25 min
1 ~ 10M
350V
700 V
MFS200
2W
12 1
4.5 0.5
0.8
24 min
1 ~ 10M
500V
1000 V
MFS300
3W
16 1
5.5 0.5
0.8
25 min
1 ~ 10M
500V
1000 V
Note : Working voltage is P X R where P is power & R is resistance in Ohms
Marking:
The MF & MFS series / type, the nominal resistance & tolerance are marked on the resistor body using four or five coloured bands in accordance with IEC publication 60062 "color codes for fixed resistors"
MFR reserves the right to make changes in product specification without notice or liability. All information is subject to MFR's own data & is considered accutate at the time of going to print.
Document no. : Revision no. :
MF02 120102
Page : 2 of 4
Material Specifications:
Element : Vacuum-deposited nickel-chrome alloy Core : Fire cleaned high purity ceramic End caps : Steel caps Coating : Specially formulated epoxy compound Standard Terminals : Solderable - tinplated copper
Part Numbering Information:
Part Number : Type number, power rating, resistance value, tolerance, tcr. MF25 Type 0.25W
Power rating
1 KOhm
Resistance value
1%
25 ppm/C
TCR
Tolerance
Examples: PART NO. : MF25, 0.25W, 1 KOhm, 1%, 25ppm/C
Packing Information:
TYPE
MF125 / MFS40 MF25 / MFS60 MF50 / MFS100 MF100 / MFS200 MF200 / MFS300 Pcs Per Poly Bag/ Blue box 1,000 1,000 500 ----Pcs Per Brown Box 1,000 1,000 500 ----7,000 5,000 2,500 1,500 1,000 Pcs Per Real 7000 5000 2500 2500 2500
Performance Data (Procedure & Requirements):
TEST
Robustness Of Termination 1. Tensile Test 2. Bend Test 3. Torsion Test Solderability Test Resistance To Soldering Heat Temperature Cycling Dry Heat Test Cold Test Short Time Overload Endurance @ 70C Endurance @ Upper Category Temperature Temperature Rise Test Damp Heat Steady State Temperature Coefficient Insulation Resistance Voltage proof test
PROCEDURE
Load 10 N for 10 sec. Load 5 N 90 , 180, 90 3 X 360 in opposite directions 16 hrs steam or 16 hrs. at 155C 2 sec. 0.5 sec. in solder at 235 5C Using flux at 260C5C for 10 sec., 6mm from the body 30 minutes at -55C & 30 minutes at 150C Total 5 number of cycles. 16 hrs at 150C 2 hrs at -55C 2.5 X Rated voltage for 5 sec. @ 25C 2000 hrs. load with Pn (power nominal) 1.5 hr. ON & 0.5 hr. OFF 1000 hrs. at 150C with no load Horizontally mounted, loaded with Pn 56 days, 40C; 90 to 95% Rh; dissipation < 0.01Pn At 25/-55/25 C & 25/150/25 C V- Block method for 1 minute duration At 500 V dc V- Block method for 1 minute duration At 500 V
REQUIREMENTS
No visual damage No visual damage No visual damage R/R max.: (0.25% +0.05 ) >95% coverage covered (good tinning) & no damage R/R max.: (0.25% +0.05 ) No visual damage R/R max.: (1.0% +0.05 ) R/R max.: (1.0% +0.05 ) R/R max.: (0.25% +0.05 ) R/R max.: (0.25 +0.05 ) No visual damage R/R max.: (2.0% +0.05 ) No visual damage R/R max.: (2.0% +0.05 ) Hot spot temperature less than maximum body temperature No visual damage R/R max.: (1% +0.05 ) Within specified limits > 103 M No flash over or break down should observed Document no. : Revision no. : MF02 120102 Page : 3 of 4
MFR reserves the right to make changes in product specification without notice or liability. All information is subject to MFR's own data & is considered accutate at the time of going to print.
Thermal Performance Data:
MFR reserves the right to make changes in product specification without notice or liability. All information is subject to MFR's own data & is considered accutate at the time of going to print.
Document no. : Revision no. :
MF02 120102
Page : 4 of 4
