Scribd
Upload
107 views1 page

QW 484-Record of Welder Qualification Tests: (See Asme BPV Code Section Ix)

This document records welder qualification tests for Mr. Mohd. Nasim Ahmed conducting shielded metal arc welding using electrode E7018 on a 6-inch by 4-inch by 3/8-inch thick base material in the flat and horizontal positions. The tests included guided bend tests, radiographic testing, and fillet weld tests to qualify the welder for welding according to ASME BPV Code Section IX. Test results showed acceptable fusion with no defects in the guided bend tests or fillet welds.

Uploaded by

proxywar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
107 views1 page

QW 484-Record of Welder Qualification Tests: (See Asme BPV Code Section Ix)

This document records welder qualification tests for Mr. Mohd. Nasim Ahmed conducting shielded metal arc welding using electrode E7018 on a 6-inch by 4-inch by 3/8-inch thick base material in the flat and horizontal positions. The tests included guided bend tests, radiographic testing, and fillet weld tests to qualify the welder for welding according to ASME BPV Code Section IX. Test results showed acceptable fusion with no defects in the guided bend tests or fillet welds.

Uploaded by

proxywar
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Dodsal Pte Ltd Q-Chem Project Doha, Qatar Job No 7979

QW 484-RECORD OF WELDER QUALIFICATION TESTS (SEE ASME BPV CODE SECTION IX)
Welder Name : Using WPS No : Mr. Mohd. Nasim Ahmed WPS/7979/PS/01 Stamp No : D075 Rev. : 0 Date 28.10.2000 Photo

VARIABLE Process Process Type Backing (metal,weld metal,flux etc.)(QW-402) Material Specifications (QW-403) Thickness - Groove - Fillet Diameter - Groove -Fillet Filler Metal (QW-404) Specification Number - Class - SFA Number - F Number Weld deposit Thickness for each Process

ACTUAL VALUES SMAW Manual


-

QUALIFICATION RANGE SMAW Manual


-

P1-P1 6"X 4"X 3/8" E7018 5.1 4 10mm Leg Length

P1 through P11
-

All 1 to 4 with backing All Base material thk, Fillet sizes.

Position (QW-405) 4F & 3F Weld Progression (QW-410) Gas Type (QW-408) Gas Backing Electrical Characteristics (QW-409) - Current DC - Polarity RP Guided Bend Test Results QW-462(a), QW-462.3(b) Identification No. Type of Bend Mandrel DiameterAngle of Bend F1 Face Bend 4T 180 F2 Face Bend 4T 180 R1 Root Bend 4T 180 R2 Root Bend 4T 180 Radiographic Test Results (QW-304 & QW-305) Radiographic Results : N/A

ALL DC RP Test Result N.A. N.A. N.A. N.A.

Fillet Weld Test Results. See QW-462.4(a) & QW-462(b) Length & Percent of Defects : mm % Fracture & Macro Test Fusion Acceptable : Appearance Fillet Size(leg) : 9mm x 10mm Convexity mm or Concavity - mm We certify that the statements in this record are correct and that the test coupons were prepared, welded and tested in accordance with the requirements of sections IX of the ASME code. Test Witnessed By: Mr. A.K.Damawale Sign: Test Conducted By: Date :
Mr. A. Shrikant

Sign:

Lab Test Report No. Organisation : Dodsal Pte Ltd.

KBRT
DOD/WQT/0157

04.04.01

Format No : DOD/Q-Chem/F043 Rev. 0 c:\DIR00001\wpq\wpq0157

You might also like