Free Engineering Projects, MBA Projects and all Arts, Science and all College

Projects

Check the below link for more formats

http://www.projectscollege.blogspot.com

GUIDELINES FOR PREPARATION OF MBA PROJECT REPORT

(Prescribed Format and Specification)

1. GENERAL:
The guideline is intended to provide broad guidelines to the MBA candidates in the
preparation of the project report. In general, the project report shall report, in an organized and
scholarly fashion, an account of original work of the candidate including methodology, data
analysis, interpretation and summary of findings.

2. NUMBER OF COPIES TO BE SUBMITTED FOR EVALUATION:

MBA: Students should submit 5 copies to the Study centre Coordinators through the Project In-
charge of the Study centre concerned on or before the specified date.
1. One copy to be signed and returned to the student
2. One copy to be retained for the College Library
3. One copy to be given to the Guide concerned
4. One copy to be forwarded to the External Examiner
5. One copy to be forwarded to the Zonal office - CD containing the complete project report
is also to be forwarded

3. SIZE OF PROJECT REPORT:

The size of project report should not exceed 60 pages of typed matter reckoned from the first page
of Chapter 1 to the last page of the last chapter.

4. ARRANGEMENT OF CONTENTS OF PROJECT REPORT:

The sequence in which the thesis material should be arranged and bound should be as
follows:
Cover Page & Title page
Bonafide Certificate
Declaration
Abstract
Acknowledgement
Table of Contents
List of Tables
List of Figures
List of Symbols, Abbreviations and Nomenclature (Optional)
Chapters
References
 Appendices

The Tables and Figures shall be introduced in the appropriate places.

5. PAGE DIMENSIONS AND MARGIN:
The dimensions of the final bound copies of the project report should be 290mm x 205mm.
Standard A4 size (297mm x 210mm) paper may be used for preparing the copies.
The final 5 copies of the project report (at the time of submission) should have the following
page margins :
Top edge: 30 to 35 mm
Bottom edge: 25 to 30 mm
Left side: 35 to 40 mm
Right side: 20 to 25 mm
The project report should be prepared on good quality white paper preferably not lower than 80
gsm/sq.m. Tables and figures should conform to the margin specifications. Large size figures
should be photographically or otherwise reduced to the appropriate size before insertion.

6. MANUSCRIPT PREPARATION:
The candidate shall supply a typed copy of the manuscript to the guide for the purpose of
approval. In the preparation of the manuscript, care should be taken to ensure that all textual
matter is typewritten to the extent possible in the same format as may be required for the final
project report. Hence some of the information required for the final typing of the project report is
included also in this section.

The headings of all items 2 to 11 listed in section 4 should be typed in capital letters without
punctuation and centered 50mm below the top of the page. The text should commence 4
spaces below this heading. The page numbering for all items 1 to 8 should be done using
lower case Roman numerals and the pages thereafter should be numbered using Arabic
numerals.

6.1 Cover Page & Title Page - A specimen copy of the Cover page & Title page for MBA
project report is given in Annexure I.

6.2 Bonafide Certificate - The Bonafide Certificate shall be in double line spacing using
Font Style Times New Roman Font Size 12, as per the format shown in Annexure II.

The certificate shall carry the signatures of student, Guide, Project In-charge at the Study
centre. The Bonafide certificate shall also carry the External Examiner’s signature obtained at
the time of Viva-voce.

6.3 Abstract - Abstract should be an essay type of narration not exceeding 600 words,
outlining the problem, the methodology used for tackling it and a summary of the findings,
when typed double line spacing, Font Style Times New Roman and Font Size 12 and signed
by the candidate.

6.4 Acknowledgement - The acknowledgement should be brief and should not exceed one
page when typed in double spacing. The candidate’s signature shall be made at the bottom end
above his / her name typed in capitals.
6.5 Table of contents - The table of contents should list all material following it
as well as any material which precedes it. The title page, Bonafide Certificate and
Acknowledgment will not find a place among the items listed in the Table of Contents
but the page numbers in lower case Roman letters are to be accounted for them.
One and a half spacing should be adopted for typing the matter under this head.
6.6 List of Table - The list should use exactly the same captions as they appear
above the tables in the text. One and a half spacing should be adopted for typing the
matter under this head.
6.7 List of Figures - The list should use exactly the same captions as they appear
below the figures in the text. One and a half spacing should be adopted for typing the
matter under this head.
6.8 List of Symbols, Abbreviations and Nomenclature - One and a half
spacing should be adopted for typing the matter under this head. Standard symbols,
abbreviations etc. should be used.
6.9 Chapters - The main text will be divided into several chapters and each chapter
may be further divided into several divisions and sub-divisions. The contents of the
Chapters are only indicative. Only Chapter titles are common.

Chapter 1: Introduction

1.1 Introduction
1.2 Scope of the Study
1.3 Statement of the problem
1.4 Objectives of the study
1.5 Research methodology

Chapter 2: Profiles

2.1 Industry profile

2.2 Company profile

Chapter 3: Literature Survey

3.1 Conceptual and theoretical review

3.2 Research review

Chapter 4: Data Analysis and Interpretation

4.1 Analysis Part – I
4.2 Analysis Part – II

Chapter 5: Conclusions

5.1 Results and Discussions

5.2 Directions for further research
5.3 Limitations
5.4 Conclusion
5.5 Suggestion

Bibliography
Appendix
* Each chapter should be given an appropriate title.

* Tables and figures in a chapter should be placed in the immediate vicinity of the reference
where they are cited.

* Footnotes should be used sparingly. They should be typed single space and placed directly
underneath in the very same page, which refers to the material they annotate.

6.10 Appendices - Appendices are provided to give supplementary information, which if

included in the main text may serve as a distraction and cloud the central theme under
discussion.
* Appendices should be numbered using Arabic numerals, e.g. Appendix 1, Appendix 2, etc.
* Appendices, Tables and references appearing in appendices should be numbered and
referred to at appropriate places just as in the case of chapters.
* Appendices shall carry the title of the work reported and the same title shall be made in the
contents page also.

6.11 List of References - Any works of other researchers, if used either directly or indirectly,
the origin of the material thus referred to at appropriate places in the project report should be
indicated. A paper, a monograph or a book may be designated by the name of the first author
followed by the year of publication, placed inside brackets at the appropriate places in the
project report should be indicated.

The listing should be typed 4 spaces below the heading "REFERENCES" in alphabetical
order in single spacing left-justified. The reference material should be listed in the
alphabetical order of the first author. The name of the author/authors should be immediately
followed by the year and other details. A typical illustrative list given below.

REFERENCES

1. Michael Levy (2008) Retailing Management 6 edition , New Delhi, Tata McGraw-
Hill.
2. Tom Jackle (2004) “Customer Satisfaction, Service Quality and perceived value : An
integrative model” Journal of Marketing Management vol.20, issue 7/8, PP.897-
917

6.12 Tables and Figures - By the word Table, is meant tabulated numerical data in the body
of the project report as well as in the appendices. All other non-verbal material used in the body
of the project report and appendices such as charts, graphs, maps, photographs and diagrams
may be designated as figures.
* A table or figure including caption should be accommodated within the prescribed margin limits
and appear on the page following the page where their first reference is made.
* Tables and figures on half page or less in length may appear on the same page along with
the text. However, they should be separated from the text both above and below by triple
spacing.
* All tables and figures should be prepared on the same paper or material used for the
preparation of the rest of the project report.
* For preparing captions, numerals, symbols or characters in the case of tables or figures, the
Computer should be enclosed.
* Two or more small tables or figures may be grouped if necessary in a single page.

* Wherever possible, the entire photograph(s) may be reproduced on a full sheet of

photographic paper.
* Photographs if any should be included in the colour Xerox form only. More than one
photograph can be included in a page.
* Samples of Fabric, Leather, etc., if absolutely necessary may be attached evenly in a page and
fixed/pasted suitably and should be treated as figures.

7. TYPING INSTRUCTIONS
7.1 General

This section includes additional information for final typing of the project report. Some
information given earlier under 'Manuscript preparation' shall also be referred.
The impressions on the typed/duplicated/printed copies should be black in colour.
If Computer printers are used uniformity of the font in the same project report shall be
observed.
A sub-heading at the bottom of a page must have at least two full lines below it or else it
should be carried over to the next page.
The last word of any page should not be split using a hyphen.
One and a half spacing should be used for typing the general text. The general text shall be typed
in Font Style Times New Roman and Font Size 12.

Single spacing should be used for typing:

(i) Long Tables
(ii) Long quotations
(iii) Foot notes
(iv) Multilane captions
(v) References

All quotations exceeding one line should be typed in an indented space - the indentation
being 15mm from either margin.

7.2 Chapters
The format for typing Chapter headings, Divisions headings and Sub-division headings are
explained through the following illustrative examples.
Chapter heading : CHAPTER 1 - INTRODUCTION
Division heading : 1.1 OUTLINE OF PROJECT WORK
Sub-division heading : 1.1.2 Literature review.

The word CHAPTER without punctuation should be centred 50mm down from the top of the
page. Two spaces below, the title of the chapter should be typed centrally in capital letters. The
text should commence 4 spaces below this title, the first letter of the text starting 20mm, inside
from the left hand margin.
The division and sub-division captions along with their numberings should be left-justified.
The typed material directly below division or sub-division heading should commence 2
spaces below it and should be offset 20mm from the left hand margin. Within a division or
sub-division paragraphs are permitted. Even paragraph should commence 3 spaces below the
last line of the preceding paragraph, the first letter in the paragraph being offset from the left
hand margin by 20 mm.

8. NUMBERING INSTRUCTIONS

8.1 Page Numbering

All pages numbers (whether it be in Roman or Arabic numbers) should be typed without
punctuation on the upper right hand corner 20mm from top with the last digit in line with the
right hand margin. The preliminary pages of the project report (such as Title page,
Acknowledgement, Table of Contents etc.) should be numbered in lower case Roman
numerals. The title page will be numbered as (i) but this should not be typed. The page
immediately following the title page shall be numbered (ii) and it should appear at the top
right hand corner as already specified. Pages of main text, starting with Chapter 1 should be
consecutively numbered using Arabic numerals.
8.2 Numbering of Chapters, Divisions and Sub-Divisions
The numbering of chapters, divisions and sub-divisions should be done using Arabic
numerals only and further decimal notation should be used for numbering the divisions and
sub-divisions within a chapter. For example sub-division 4 under division 3 belonging to
chapter 2 should be numbered as 2.3.4. The caption for the sub-division should immediately
follow the number assigned to it.
Every chapter beginning with the first chapter should be serially numbered using Arabic
numerals. Appendices included should also be numbered in an identical manner starting with
Appendix 1.

8.3 Numbering of Tables and Figures

Tables and Figures appearing anywhere in the thesis should bear appropriate numbers. The rule
for assigning such numbers is illustrated through an example. Thus, if a figure in Chapter 3,
happens to be the fourth then assign 3.4 to that figure. Identical rules apply for tables
except that the word Figure is replaced by the word Table. If figures (or tables) appear in
appendices then figure 3 in Appendix 2 will be designated as Figure A 2.3. If a table to be
continued into the next page this may be done, but no line should be drawn underneath an
unfinished table. The top line of the table continued into the next page should, for example read
Table 2.1 (continued) placed centrally and underlined.

8.4 Numbering of Equations

Equations appearing in each Chapter or Appendix should be numbered serially, the
numbering commencing a fresh for each Chapter or Appendix. Thus for example, an
equation appearing in Chapter 2, if it happens to be the eighth equation in that Chapter should be
numbered (2.8) thus:
f = k (2.8)
c
While referring to this equation in the body of the thesis it should be referred to as Equation
(2.8).
9. BINDING SPECIFICATIONS
* Project report submitted (5 copies) for MBA should be bound using flexible cover of thick
white art paper. The spine for the bound volume should be black Calico of 20mm width. The cover
should be printed in black letters and the text for printing should be identical to what has been
prescribed for the title page.
 ANNEXURE I
(A typical Specimen of Cover Page & Title Page)
<Font Style Times New Roman - Bold>

PURCHASE BEHAVIOUR FOR ESSENTIAL PRODUCTS

<Font Size 12> <1.5 line spacing>

By
<Font Size 12>

Student Name
<Font Size 12> <Bold - Capital>
Reg. No.
<Font Size 12>

A PROJECT REPORT
<Font Size 12> <Capital>

Submitted to the
<Font Size 12>

FACULTY OF MANAGEMENT SCIENCES

<Font Size 12> <Bold - Capital>

in partial fulfillment for the award of the degree

of
<Font Size 12> <Italic>

MASTER OF BUSINESS ADMINISTRATION

<Font Size 12> <Bold - Capital>
ANNA UNIVERSITY CHENNAI
CHENNAI 600 025
<Font Size 12><Bold - Capital>
Month, Year
<Font Size 12>
 ANNEXURE II

BONAFIDE CERTIFICATE

Certified that the Project report titled _________________________________ is the

bonafide work of Mr. / Ms. < NAME, CAPS AND BOLD , REG NO,BOLD> who carried

out the work under my supervision. Certified further that to the best of my knowledge the

work reported herein does not form part of any other project report or dissertation on the

basis of which a degree or award was conferred on an earlier occasion on this or any other

candidate.

Signature of Supervisor Signature of HOD

Submitted to Project Viva Voce held on ……………….

Internal Examiner External Examiner

 DECLARATION

I hereby declare that the project entitled “(Project Topic)” submitted for the M.B.A.
Degree is my original work and the dissertation has not formed the basis for the
award of any degree, associate ship, fellowship or any other similar titles.

Place:

Date: Signature of the Student

(NAME,BOLD, TIMESNEW ROMAN, 12

PT)