Scribd
Upload
86 views

Composite Columns-Circular

This document appears to be a design report for a composite beam-column made of a circular concrete section with a doubly crossed steel profile. It includes input data for the steel and concrete sections, required strength values, calculations of nominal strength considering axial and flexural loading, checks of combined stresses, load transfer considerations, and design of the bearing. However, many values in the calculations are #DIV/0! or 0, indicating errors or missing information.

Uploaded by

مصطفى عبدالرحيم
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
86 views

Composite Columns-Circular

This document appears to be a design report for a composite beam-column made of a circular concrete section with a doubly crossed steel profile. It includes input data for the steel and concrete sections, required strength values, calculations of nominal strength considering axial and flexural loading, checks of combined stresses, load transfer considerations, and design of the bearing. However, many values in the calculations are #DIV/0! or 0, indicating errors or missing information.

Uploaded by

مصطفى عبدالرحيم
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 3

DAR AL-HANDASAH

SHAIR&PARTNERS

DESIGN OF COMPOSITE BEAM-COLUMNS


Circular Concrete Section With Doubly Crossed Steel Profile
Prepared by Ahmed Seoudi Computed by Checked by Approved by

Project Building Subject

Input Data
Steel Section
h= cm As = 0.00 tw = cm Ys = 0.00 bf = cm rx = #DIV/0! tf = cm ry = #DIV/0! It is assumed that the two profiles have the same cross section. 2 Fy= Es = t/cm cm cm (from bot. of steel) cm cm kg/cm
2 2

Concrete Section
D= Concrete strength ,fc`= Encasement Thicknesses : Deducted Areas = cm Top 0.00 kg/cm2 Bot. 0.00 cm
2

Ec =

kg/cm2

cm ( One Side Haunches or Grooves )

Reinforcing Bars
Ar total = Tension side , Ar @ x = Tension side , Ar @ y = Fyr = As/Ac = #DIV/0! cm 2 cm 2 cm kg/cm2 %
2

Dist.of C.G. = Dist.of C.G. =

cm cm References

#DIV/0! Lx = cm

I2.1

Slenderness Ratios
kx = rx = ky = ry = (kL/r)max = #DIV/0! 0.00 #DIV/0! #DIV/0! cm Ly = cm 0 cm I2.2 I2.2

Y-AXIS Muy Ar

CT

tf

Mux

X-AXIS

CB

tf

bf D

Figure 1

187195301.xls.ms_office - Rev. 1.0

Page 1 / 3

11/10/2013

Required Ultimate Strength


Pu = Mux = Muy = ton m.t m.t

Nominal Strength
I. Axial Nominal Strength
Fmy = Em = lcr = Fcr = f Pn = #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! t/cm 2 t/cm #DIV/0! t/cm ton
2 2

(I2 - 1) (I2 - 2) (E2 - 4) #DIV/0! (E2 - 1)

II. Flexural Nominal Strength


1) Moment about X-axis Note: Plastic Neutral Axis is assumed to lie in the web y= #DIV/0! cm (see figure 2) Forces Force arm @ PNA #DIV/0! ton #DIV/0! cm Compression Forces: Cc1 = Cc2 = 0.00 ton #DIV/0! cm Cc3 = #DIV/0! ton #DIV/0! cm Cf1 = 0.00 ton #DIV/0! cm Cw = #DIV/0! ton #DIV/0! cm Cf2 = #DIV/0! ton #DIV/0! cm Deducted Area Ca = 0.00 ton cm #DIV/0! m.t. SC = #DIV/0! ton SMc = #DIV/0! ton #DIV/0! cm Tension Forces: Tw1 = Tw2 = 0.00 ton #DIV/0! cm Tf1 = #DIV/0! ton #DIV/0! cm Tf2 = 0.00 ton #DIV/0! cm Ts = 0.00 ton #DIV/0! cm #DIV/0! m.t. ST = #DIV/0! ton SMt = fMnx = #DIV/0! m.t. I3.3

Cc 1 Cc +Cf 2 1 Cc +Cw+Cf 3 2 Tw 2 Tf 1 Tw 1 Tf 2 Ts

P.N.A

Figure 2

187195301.xls.ms_office - Rev. 1.0

Page 2 / 3

11/10/2013

Check of Stresses
Combined Stresses
Pu / fPn = Factor of Safety = #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!

Load Transfer
Load Portion Resisted By Concrete = Load Portion Resisted By Steel Secion = Load Transfered to Shear Studs = Diameter of Shear Studs = Qn = Min. No. of Shear Studs = #DIV/0! #DIV/0! #DIV/0! ton (1) ton (2) ton C - I2.4 C - I2.4 #DIV/0!

0.00 #DIV/0!

2 cm Fu = t/cm ton Studs (along the column length)

(I5 - 1)

Design of Bearing
Area of Base Plate = Applied Bearing Load = Bearing Resistance = #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! cm2 ton ton #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0! #DIV/0!

#DIV/0! 0.00 #DIV/0!

#DIV/0! #DIV/0! #DIV/0! #DIV/0!

187195301.xls.ms_office - Rev. 1.0

Page 3 / 3

11/10/2013

You might also like